Solenoid valves /-way direct-operated Type EV10A Features EV10A NC and NO Very compact valves for industrial application, such as control. For water, oil, compressed air and similar neutral media. Ambient temperature: Up to +0 Coil enclosure: Up to IP Thread connections: G⅛ and G¼ Viscosity: Up to 0 cst k v values up to 0.08 m /h Technical data Installation Pressure range NC 0 to 0 bar test pressure Time to open and to close Ambient temperature Medium temperature Viscosity Materials NO Optional, but vertical solenoid system is recommended 0 to bar 0 bar - 10 ms (depending on the pressure) max. +0 FKM: -10 o to +100 max. 0 cst Valve body: Valve orifice: Armature: Armature tube: Armature stop: Spring: Brass, W.no..001 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.10 / AISI 01 O-rings/valve plate: FKM IC.PD.100.E1.0 0B
/-way direct-operated valvestype EV10A Function NC 1.Closing spring.armature.valve plate.coil P:Pressure gate A:Working gate R:Relief gate Coil voltage disconnected (closed): When the voltage to the () is disconnected, the armature () with the valve plates () is pressed down by the closing spring (1) and closes the connection between P and A. At the same time, the connection between gates A and R is opened. The connection between P and A will be closed for as long as the voltage to the is disconnected. Coil voltage connected (open): When voltage is applied, the armature () with the valve plates () is lifted and closes the connection between A and R. At the same time, the connection between P and A is opened. The connection between P and A will be open for as long as there is voltage to the. Ordering NC Valve body Conn. ISO 8/1 G⅛ G¼ Seal material 1) k v value [m /h] DN mm Media temp. Min Type designation Code no. without Main type Specification Min. Permissible differential pressure (bar) ) Water Oil Air FKM 0.0 1. -10 +100 EV10A 1.B G 18F NC000 0H808 0 18 18 0 0 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 18F NC000 0H808 0 10 10 1 1 AC, FKM 0.08.0-10 +100 EV10A 1.8B G 18F NC000 0H808 0.. 8 8 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 1F NC000 0H80 0 18 18 0 0 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 1F NC000 0H80 0 10 10 1 1 AC, FKM 0.08.0-10 +100 EV10A 1.8B G 1F NC000 0H80 0.. 8 8 AC, 1) For WRAS approved seal material in EPDM, please contact Danfoss ) The EV10A valve in de-energized closed version, is also available for higher differential pressure up to 8 bar. Please contact Danfoss. Suitable types IC.PD.100.E1.0
/-way direct-operated valvestype EV10A Function NO 1.Opening spring.armature.valve plate.coil P:Pressure gate A:Working gate R:Relief gate Coil voltage disconnected (open): When the voltage is disconnected, the armature () with the valve plates () is pressed down by the opening spring (1) and closes the connection between A and R. At the same time, the connection between P and A is open. The connection between P and A will be open for as long as the voltage to the is disconnected. Coil voltage connected (closed): When voltage is applied to the (), the armature () with the valve plates () is lifted and closes the connection between P and A. At the same time, the connection between gates A and R is opened. The connection between P and A will be closed for as long as there is voltage to the. Ordering NO Valve body Conn. ISO 8/1 G ⅛ Seal material k v value [m /h] DN mm Media temp. Min Type designation Code no. without o Main type Specification Min. C FKM 0.0 1. -10 +100 EV10A 1.B G 18F NO000 0H81 0 FKM 0.0 1. -10 +100 EV10A 1.B G 18F NO000 0H81 0 Permissible differential pressure (bar) Water. Oil. Air.. Suitable types AB AC AK AB AC AK G ¼ FKM 0.0 1. -10 +100 EV10A 1.B G 1F NO000 0H8 0 FKM 0.0 1. -10 +100 EV10A 1.B G 1F NO000 0H8 0... AB AC AK AB AC AK IC.PD.100.E1.0
/-way direct-operated valvestype EV10A Dimensions and weight Bottom view Thread ISO 8/1 L Coil type AB + AC B Coil type +AK H A Weight without [kg] G 1/8 0.08 G 1/ 1. 0.110 Coil options Type AC:.0 W a.c. / 10 W d.c. (Type AB:. W a.c. / W d.c. ) Type :. W a.c. /. W d.c. (Type AK:,0 W d.c.) Ordering - s See separate data sheet for s DKACV.PD.00.A IC.PD.100.E1.0
Features /-way direct-operated valvestype EV10A 0H8 EV10A NC Man Very compact valves for industrial application, such as control. For water, oil, compressed air and similar neutral media. Ambient temperature: Up to +0 Coil enclosure: Up to IP Thread connections: G⅛ and G¼ Viscosity: Up to 0 cst k v values up to 0.0 m /h Differential pressure: Up to 0 bar Technical data Installation Pressure range test pressure Time to open and to close Ambient temperature Medium temperature Viscosity Materials Optional, but vertical solenoid system is recommended 0 to 0 bar 0 bar - 10 ms (depending on the pressure) max. +0 FKM: -10 o to +100 max. 0 cst Valve body: Valve orifice: Armature: Armature tube: Armature stop: Spring: Other parts: O-rings/valve plate: Brass, W.no..001 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0F FKM Function 1.Closing spring.armature.valve plate.coil P:Pressure gate A:Working gate R:Relief gate Coil voltage disconnected (closed): When the voltage to the () is disconnected, the armature () with the valve plates () is pressed down by the closing spring (1) and closes the connection between P and A. At the same time, the connection between gates A and R is opened. The connection between P and A will be closed for as long as the voltage to the is disconnected. Coil voltage connected (open): When voltage is applied, the armature () with the valve plates () is lifted and closes the connection between A and R. At the same time, the connection between P and A is opened. The connection between P and A will be open for as long as there is voltage to the. IC.PD.100.E1.0
/-way direct-operated valvestype EV10A Ordering Conn. ISO 8/1 G⅛ G¼ Seal material k v value [m /h] DN Media temp. Min Type designation Code no. without o Main type Specification C Min. Permissible differential pressure (bar) Water Max Oil Air a.c. / d.c Suitable types FKM 0.0 1. -10 +100 EV10A 1.B G 18F NC00 0H811 0 18 18 0 0 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 18F NC00 0H8 0 10 10 1 1 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 1F NC00 0H811 0 18 18 0 0 AC, FKM 0.0 1. -10 +100 EV10A 1.B G 1F NC00 0H8 0 10 10 1 1 AC, Coil options Type AC:.0 W ac / 10 W dc Type :. W ac /. W dc Ordering - s See separate data sheet for s DKACV.PD.00.A Dimensions and weight Bottom view Thread ISO 8/1 L Coil type AC B Coil type H A Weight without [kg] G⅛ 0.08 G ¼ 1. 0.110 IC.PD.100.E1.0
/-way direct-operated valvestype EV10A Features EV10A NC FL Very compact valves for industrial application, such as control. For water, oil, compressed air and similar neutralmedia. Ambient temperature: Up to +0 Coil enclosure: Up to IP Viscosity: Up to 0 cst Flange connection: x mm Differential pressure: Up to 0 bar Technical data Installation Pressure range test pressure Time to open and to close Ambient temperature Medium temperature Viscosity Materials Optional, but vertical solenoid system is recommended 0 to 0 bar 0 bar - 10 ms (depending on the pressure) max. +0 FKM: -10 o to +100 max. 0 cst Valve body: Brass, W.no..001 Valve orifice: Armature: Armature tube: Armature stop: Spring: Spring extensions: Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.0 / AISI 0 Stainless steel, W.no.1.01 / AISI 0 Stainless steel, W.no.1.10 / AISI 01 Stainless steel, W.no.1.10 / AISI 0F O-rings/valve plate: FKM Function 1.Closing spring.armature.valve plate.coil P:Pressure gate A:Working gate R:Relief gate Coil voltage disconnected (closed): When the voltage to the () is disconnected, the armature () with the valve plates () is pressed down by the closing spring (1) and closes the connection between P and A. At the same time, the connection between gates A and R is opened. The connection between P and A will be closed for as long as the voltage to the is disconnected. Coil voltage connected (open): When voltage is applied, the armature () with the valve plates () is lifted and closes the connection between A and R. At the same time, the connection between P and A is opened. The connection between P and A will be open for as long as there is voltage to the. IC.PD.100.E1.0
/-way direct-operated valvestype EV10A Ordering Conn. ISO 8/1 x k v value [m /h] DN Media temp. Min. Type designation Code no. without Main type Specification Min. Permissible differential pressure (bar) Water Oil Air a.c. /d.c. Seal material Suitable types FKM 0.0 1. -10 +100 EV10A 1.B FLF NC000 0H8181 0 18 18 0 0 AC, FKM 0.08 1. -10 +100 EV10A 1.B FLF NC000 0H818 0 10 10 1 1 AC, Coil options Type AC:.0 W ac / 10 W dc Type :. W ac /. W dc Ordering - s See separate data sheet for s DKACV.PD.00.A Dimensions and weight Bottom view Flange Coil type AC B Coil type H Weight without [kg] x 0. 0.08 IC.PD.100.E1.0 Danfoss A/S 01-00 IC-MC/frz