TT inline mixed type fans combine wide capabilities and excellent features of axial and centrifugal fans. The unique motor and impeller combination enables the TT fans to deliver high performance with minimum noise generation against high static pressure found in ventilation systems. The compact design of TT inline fans allows it to fit into small, restricted spaces. The fan can be installed in either a vertical or horizontal configuration. No tools required when removing the motor for inspection or maintenance. Designed for input and extract ventilation. Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Hydroponic Growing General Ventilation ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 73 CFM to 512 CFM Compatible with 4, 5, and 8 duct Suitable for 32 F to 104 F air stream temperatures Ball bearing external rotor motor and thermal protection ensures 40 000 operation hours Silent and safe operation Compact overall dimensions Twospeed operating mode Speed can be adjusted using an optional controller Access to the engine and impeller without dismantling the ducts Made of durable ABS plastic Rated for residential and commercial use Five year warranty Caution! Connection to the electrical supply should be performed only by qualified specialist in compliance with the mounting instructions. AMCA International Licensed Products. Model Speed Duct CFM v Static Pressure (Ps) Ins. W.G RPM* Sones Watts* Amps* Max Dia. Ps Volts 0 0,125 0,20 0,25 0,5 0,75 1,00 1,25 1,5 TT 100 high 3113 2,42 4 36,0 0,45 105 49 37 32 13 0,70 low 2818 1,11 29,5 0,37 62 41 30 23 2 0,54 TT 100 S high 2832 3,46 4 49,9 0,41 88 75 70 67 52 40 25 11 1,47 low 2170 3,39 30,1 0,25 65 53 48 45 27 11 0,95 high 2600 2,61 TT 125 5 41,0 0,51 126 112 99 46 0,49 low 2350 1,42 31,0 0,40 87 64 27 4 0,27 high 3340 4,20 TT 150 6 191,0 1,59 440 428 420 414 383 136 87 57 27 1,71 low 3100 1,78 148,0 1,23 412 399 389 382 343 119 78 48 18 1,65 high 2116 4,35 TT 200 8 110,8 0,93 473 450 432 420 352 254 89 1,167 low 1622 1,98 69,5 0,58 349 317 294 276 158 32 0,827 high 2419 4,48 TT 315 12,4 352,9 2,95 1051 1020 999 986 914 838 746 632 500 2,665 low 1914 2,50 235,8 1,95 830 797 770 751 638 496 335 209 109 1,79 Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the TT series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.
www.ventsus.com Pressure loss graphics determination TT 250 high speed low speed Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model TT 100 TT 100 S TT 125 TT 150 TT 200 TT 250 TT 315 Measurements Ø D Ø D1 B H L 3 3/4 3 3/4 4 13/16 5 3/4 7 13/16 9 3/4 12 3/16 5 1/2 7 11/16 5 1/2 7 11/16 8 1/4 10 1/8 12 11/16 6 9/16 8 3/4 6 9/16 8 3/4 9 7/16 11 5/16 14 1/4 7 1/2 9 13/16 7 1/2 9 13/16 10 1/4 12 11/16 16 1/16 9 11/16 11 5/8 9 11/16 11 5/8 11 5/8 15 1/16 17 1/2 AMCA International NonLicensed Products. Model TT 250 Speed high low RPM 2525 1925 Volts Max. Watts 200 130 Max. Amps 1,68 1,11 CFM v Static Pressure (Ps) Ins. W.G 0 0,125 0,2 0,25 0,375 0,5 0,75 1,0 880 655 873 646 866 630 862 620 842 565 816 480 708 330 581 230 1,5 323 10 Max. Ps 2,27 1,54 Duct Dia. 10 Sones 4,44 2,33 Vent hood Gravity louvered grille Ceiling grille Plastic duct Plastic elbow Air disc valve Hose clamps Flexible ducts
VK inline centrifugal fan features high powered turbine and delivers high airflow performance on high static pressure with low noise and low power usage. VK fan is ideal for single and multiple duct systems. Simple and reliable corrosion resistant fastening system makes either a vertical or horizontal installation possible. No tools required when removing the motor or impeller for inspection or maintenance. Suitable For: Whole house ventilation Ventilation of several premises Duct boosting Hydroponics growing General Ventilation extraction ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 168 CFM to 891 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 32 F to 140 F air stream temperatures Ballbearing motor Five year warranty Automatic reset, thermal overload protection Balanced impeller on the motor shaft Silent and safe operation Compact overall dimensions Housing made of durable ABS plastic Reliable capacitor Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. AMCA International Licensed Products. Model VK 100 VK 125 VK 150 VK 200 VK 250 VK 315 RPM* 3088 2960 2907 2850 2604 2741 Sones 6,91 7,14 7,16 8,10 10,20 11,50 Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,20 0,25 0,375 0,5 0,75 1,00 1,25 1,5 4 5 6 8 10 12,4 105,8 114,0 112,7 142,0 292,5 270,5 0,96 0,96 0,96 1,18 2,43 2,25 162 235 317 583 735 837 155 222 300 560 699 800 150 214 289 544 675 772 147 207 282 532 658 755 141 193 265 497 625 707 134 178 247 462 588 659 151 212 390 507 564 104 123 178 320 432 474 87 99 132 255 369 387 67 72 68 196 307 307 Max Ps 2,18 2,05 1,86 2,20 3,06 2,66 Volts Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the VK series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.
www.ventsus.com Pressure loss graphics determination Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model Ø d Ø D C A B VK 100 VK 125 VK 150 VK 200 VK 250 VK 315 3 15/16 4 15/16 5 7/8 7 13/16 9 13/16 12 3/8 9 13/16 9 13/16 11 13/16 13 3/8 13 3/8 15 3/4 9 1/16 8 11/16 11 1/4 10 7/8 10 3/8 10 7/8 1 1/16 1 1/16 1 1/16 1 1/4 1 1/4 1 1/4 Vent hood Gravity louvered grille Ceiling grille Plastic duct Plastic elbow Air disc valve Hose clamps Flexible ducts
Inline centrifugal VKM fans are the perfect air movers for residential and light commercial applications. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The fans housing is made of steel with zinc phosphate treatment and polymeric coating. Colors available are indicated in the color chart. VK inline fan fits into small, restricted spaces. Permits vertical or horizontal installation. White Beige Brown Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Dryer exhaust Hydroponic Growing General Ventilation ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Grey Brilliant blue Black Galvanized steel AMCA International Licensed Products. Model VKM 100 VKM 125 VKM 150 VKM 200 VKM 250 VKM 305 RPM* 3000 2950 2400 2520 2516 2981 Sones 6,91 6,80 6,60 7,60 8,20 8,35 4 5 6 8 10 12,4 Features of VKM and VKMS Series: Airflow from 165 up to 985 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 13 F to 140 F air stream temperatures Ball bearing external rotor motor with thermal protection Silent and safe operation Compact overall dimensions Speed can be adjusted using optional controller Five year warranty Mounting: The fans are supplied with fastening brackets for easy mounting Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,2 0,25 0,375 0,5 0,75 1,00 1,25 108,2 112,0 110,0 195,0 232,0 243,8 0,90 0,97 0,90 1,63 1,95 2,10 174 239 325 541 678 784 167 228 292 502 638 756 162 222 275 480 613 738 159 217 265 464 599 727 * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Model 2745 2320 8,30 8,42 8 12 240 272 2,14 2,42 657 985 640 920 625 869 608 818 151 205 241 428 550 698 590 773 142 192 214 391 479 669 550 680 124 165 172 320 408 498 594 106 130 139 265 340 Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,00 1,25 434 512 84 102 107 222 292 370 441 1,5 2,5 Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). AMCA International NonLicensed Products. VKMS 200 VKMS 305 RPM Sones 60 72 67 183 248 1,5 2,5 112 210 36 90 Max Ps 2,90 3,61 Max Ps 2,14 1,95 1,88 2,80 3,03 3,27 Volts 115 115 Volts Ventilation Systems, JSC certifies that the VKM series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.
www.ventsus.com Pressure loss graphics determination Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). Model Ø d Ø D C A B L E VKM 100 VKM 125 VKM 150 VKM 200 VKMS 200 VKM 250 VKM 305 VKMS 305 3 15/16 4 15/16 5 7/8 7 7/8 7 7/8 9 13/16 12 12 10 10 11 15/16 13 9/16 13 9/16 13 9/16 15 7/8 15 7/8 8 1/16 8 1/16 8 11/16 9 7/16 9 7/16 9 13/16 11 3/4 11 3/4 1 9/16 1 9/16 10 3/16 10 3/16 12 3/16 13 3/4 13 3/4 13 3/4 16 1/8 16 1/8 1 9/16 1 9/16 1 9/16 1 9/16 1 9/16 Vent hood Gravity louvered grille Ceiling grille Plastic ducte Plastic elbow Air disc valve Hose clamps Flexible ducts
Suitable For: Bathroom Living Area Whole House Ventilation Duct Boosting Dryer Exhaust Hydroponic Growing General Ventilation Inline centrifugal VKMz fans are perfect air movers for residential and light commercial applications. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The fans housing is made of galvanized steel. VKMz inline fan fits into small, restricted spaces. The fan can be installed in either vertical or horizontal configuration. ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow from 165 CFM to 985 CFM Compatible with 4, 5, 6, 8, 10, and 12 3/8 duct Suitable for 13 F to 140 F air stream temperatures Ball bearing external rotor motor with thermal protection Silent and safe operation Compact overall dimensions Speed can be adjusted using optional controller Five year warranty Mounting: VKMz inline fans are supplied with fastening brackets for easy mounting Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Model Ø d Ø D C A B VKMz 100 VKMz 125 VKMz 150 VKMz 200 VKMz 250 VKMz 315 3 7/8 4 15/16 5 7/8 7 7/8 9 13/16 12 9 1/4 9 1/2 9 1/2 13 1/8 13 1/8 15 13/16 8 1/16 7 9/16 7 1/16 9 1/4 8 5/16 11 11/16 15/16 15/16 7/8 1 1/8 2 3/16 15/16 15/16 13/16 1 1/8 1 3/8 Model VKMz 100 VKMz 125 VKMz 150 VKMz 200 VKMz 250 VKMz 315 RPM 3100 3020 2920 2290 2545 2615 Sones 6,20 6,12 6,90 7,20 7,49 8,35 Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,0 1,25 1,5 4 5 6 8 10 12,4 103 105 107 225 223 230 0,88 0,90 0,92 1,89 1,88 2,01 152 310 310 557 694 835 147 199 300 535 660 802 142 195 282 509 615 769 136 190 265 492 588 730 130 185 245 471 552 691 117 166 217 418 493 597 102 139 185 370 435 500 83 107 146 330 375 422 56 70 88 288 315 350 2,5 101 99 85 Max Ps 2,07 1,89 1,80 3.09 2,97 2,83 Volts
Models are designed for easy electrical connection. www.ventsus.com Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Vent hood Gravity louvered grill Ceiling grill Plastic duct Plastic elbow Air disc valve Hose clamp Flexible hose
Suitable For: Living Area Whole house Ventilation Medium and Large Size Facilities Dryer Exhaust General Ventilation VCN fans are specially designed for vertical exterior mounting and are perfect ventilation solution for medium and large facilities. The fans move a lot of air while maintaining quiet noise level inside the premises. The asynchronous external rotor motor, ball bearings, and automatic reset thermal overload protection ensure long life of the fan. The VCN fan s housing can be made of galvanized steel or steel with polymeric coating. Colors available are indicated in the color chart. Special anticorrosion protection ensures long life of the fans. Speed can be regulated with a variable speed control. White Beige Brown Grey Brilliant blue Black ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Galvanized steel Features: Airflow is 238 CFM to 306 CFM Compatible with 4, 5, 6, and 8 duct Suitable for 13 F to 140 F air stream temperatures Five year warranty Mounting: VCN fans are lightweight, compact, and simple to install. Just mount the fan to the wall and connect to the electrical supply Caution! Connection to the electrical supply should be performed only by qualified specialists in compliance with the mounting instructions. Model D L B H VCN 100 VCN 125 VCN 150 VCN 200 3 15/16 4 15/16 5 7/8 7 7/8 13 3/4 13 3/4 15 3/4 15 3/4 10 1/4 10 1/4 11 13/16 11 13/16 5 7/16 5 7/16 5 7/16 5 7/16 Model RPM Sones Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,375 0,5 0,75 1,0 1,25 1,5 Max Ps Volts VCN 100 VCN 125 VCN 150 VCN 200 3100 2950 2250 2300 7,20 7,10 7,84 8,10 4 5 6 8 108 108 109 106 0,92 0,92 0,90 0,88 238 248 302 306 232 239 296 300 223 231 286 291 215 223 274 278 204 213 256 258 178 183 215 208 134 146 159 148 82 90 94 80 30 25 37 9 1,65 1,60 1,66 1,53
www.ventsus.com Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Flow Rate (CFM) Flow Rate (CFM)
Suitable For: Whole House Ventilation Ventilation of Numerous Apartments Medium and Large Size Facilities (Offices, Restaurants, and Garages) VKP mini fans are specially designed for extract and input ventilation and are perfect air movement solution for areas with tight spaces. It provides small to medium airflow. From 100 cfm to 297 cfm at 0.2 static pressure. VKP series is suitable for a wide range of residential and light commercial applications. The fans offer a variety of choices of extract and input ventilation options and enables ducting from multiple sources. The external rotor motor on ball bearings and the backward curved, balanced impeller ensure high pressure in ventilation ducts, prevent vibration, and assure quiet operation. Speed can be regulated with a variable speed control. The fan s housing is made of steel with zinc phosphate treatment and polymeric coating. Removable cover allows easy maintenance of the fan. The series is characterized by low power consumption. ANSI/UL 705, 6th Edition & CSA/C22.2 No 113M1984 Features: Airflow is 115 CFM to 340 CFM Compatible with 3 1/8, 4, 5, and 6 duct Suitable for 13 F to 140 F air stream temperatures Five year warranty AMCA International Licensed Products. Model VKP 125100*2 VKP 125 VKP 150 RPM* 2596 2530 2510 Sones 4,1 4,1 4,2 Duct CFM v Static Pressure (Ps) Ins. W.G Dia. Watts* Amps* 0 0,125 0,2 0,25 0,5 0,75 1,00 1,25 5 / 4 5 6 85,4 86,8 170 0,70 0,74 1,42 210 180 317 199 168 307 192 163 297 188 159 290 165 138 263 138 114 237 112 92 212 80 59 180 1,5 1,75 61 30 149 26 110 Max Ps 1,9 1,74 2,44 Volts Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). * The parameters RPM, Watts, Amps are indicated at 0.2 in. w.g. static pressure Ventilation Systems, JSC certifies that the VKP series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. AMCA International NonLicensed Products. Model VKP 80 mini VKP 100 mini VKP 150/125*2 RPM 2000 2000 3050 Sones 3,9 3,9 4,2 Duct Max Max CFM v Static Pressure (Ps) Ins. W.G Dia. Watts Amps 0 0,125 0,25 0,5 0,75 1,0 1,25 1,75 3 1/8 4 6 64 64 168 0,53 0,53 1,40 115 131 340 114 130 338 114 130 335 111 125 324 106 118 304 99 109 273 89 95 236 52 29 146 Max Ps 1,94 1,97 2,28 Volts
www.ventsus.com Pressure loss graphics determination D H L D1 B Pic. 1 Inline dryer booster fan D Performance certified is for installation type D Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Use this statement only when nominal speed is catalogued. Performance ratings do not include the effects of appurtenances (accessories). H Model D D1 L B H Picture VKP 80 mini VKP 100 mini VKP 125 VKP 150 VKP 125/100*2 VKP 150/125*2 3 1/8 3 15/16 4 15/16 5 7/8 4 15/16 5 7/8 3 1/8 3 15/16 4 15/16 5 7/8 3 15/16 4 15/16 14 1/4 14 1/4 16 9/16 19 11/16 16 9/16 19 11/16 9 15/16 9 15/16 9 15/16 11 13/16 9 15/16 11 13/16 3 3/4 4 3/4 5 11/16 7 1/16 5 11/16 7 1/16 1 1 1 1 2 2 L Pic. 2 Twin intake fan D1 B Ceiling grille Air disc valve Back valve Silencer Hose clamps Flexible ducts
VUT mini is ideal for ventilating: Whole houses, Apartments, and Commercial premises. Apartment ventilation; Whole house ventilation; Commercial premises ventilation (cafe, restaurants, swimming pools, shops, etc) The compact VUT mini heat recovery ventilator delivers a continuous supply of fresh air into premises while exhausts an equal amount of contaminated air. The heat transfer module of the VUT mini heat recovery ventilator transfers heat from the outgoing stream to the incoming stream while the airstreams never mix. The fresh air stream is automatically preheated or precooled depending on the season. VUT mini can recover from 50 to 75 percent of the heat in the outgoing airstream. It can dramatically reduce the energy needed to heat outdoor air to a comfortable indoor temperature. ANSI/UL 1812, 2nd Edition & CSA/C22.2 No 113M1984 Design and control: The case of VUT mini is made of aluminum zinc alloy (sheet metal) with internal sound and thermal insulation. Insulation is made of inflammable material mineral cotton with a thickness of. Two builtin, G4 cleaning level filters ensure filtration of exhaust and incoming air, keeping the air always fresh. The filters prevent pollen and dust from entering the house. It purifies the air by removing contaminants and particles. VUT mini heat recovery ventilator is supplied with backward curved impeller and builtin protective thermostat with automatic restart option. Sealed and permanently lubricated ballbearing motor guarantees long life and maintenance free operation. VUT mini features dynamically balanced motors and impellers. Aluminum heat recovery core designed for efficient crossflow ventilation. The summer insert is foreseen for those units in which heat exchangers are not used. Liquid condensation is collected in the drain pan. VUT mini features an automatic defrost mode which activates when the temperature of the incoming fresh air is below 23 0 F. After the ambient air has passed through the unit during a period of five minutes the supply motor restarts at the preset speed. The defrost cycle continues until the supply air stream rises above 23 0 F. VUT mini horisontal Model A B C D VUT mini vertical VUT 200 H mini VUT 200 V mini VUT 300 H mini VUT 300 V mini 23 5/8 23 5/8 23 5/8 23 5/8 15 13/16 15 13/16 15 13/16 15 13/16 10 15/16 10 15/16 10 15/16 10 15/16 3 15/16 3 15/16 4 15/16 4 15/16 Installation: VUT mini features compact size, vertical and horizontal configurations. Ideal for applications where space is limited. The unit can be installed on the ground and it is suited to use in dropceiling. Can be placed in a closet, laundry room, workshop, top floor knee wall area, or even a garage. When installed, make sure that free access to drainage is provided. The latched front door provides easy access to the motor, filter, and drain pan.
Models of VUT mini models: VUT 200 mini compatible with 4 duct, Airflow 136 CFM at 0.0 static pressure. Horizontal (VUT 200 H mini) and vertical (VUT 200 V mini) configurations. VUT 300 mini compatible with 5 duct, 180 CFM at 0.0 static pressure. Horizontal (VUT 300 H mini) and vertical (VUT 300 V mini) configurations. www.ventsus.com Pressure loss graphics determination Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM) Model RPM Sones Duct Dia. Max Watts Max Amps CFM v Static Pressure (Ps) Ins. W.G 0 0,125 0,25 0,5 0,75 1,0 1,25 1,5 Max Ps Volts VUT 200 H mini VUT 200 V mini VUT 300 H mini VUT 300 V mini 2765 2720 4,8 5 4 5 153 161 1,31 1,38 125 144 123 140 119 135 106 119 89 98 69 73 44 45 14 16 1,6 1,62 Air dick valve Hose clamps Aluvent Flexible ducts
Model Ø D B C 100 C 125 C 150 C 200 C 250 C 315 C 100 Zn C 125 Zn C 150 Zn C 200 Zn C 250 Zn C 315 Zn 3 3/4 4 1/8 4 11/16 5 3/16 5 5/8 6 3/16 7 1/2 8 1/4 9 5/8 10 1/4 12 3/8 13 3/8 3/8 3/8 3/8 3/8 3/8 C stell with polymeric coating C Zn galvanized steel
KOM round back valve is especially designed to prevent backdraft. The spring loaded backdraft damper is manufactured of steel with polymeric coating or galvanized steel and contains rubber seal. KOM back valve is installed in ventilation systems and ventilation ducts. It also prevents the entry of birds and other wildlife. www.ventsus.com Model D L L1 KOM 100 KOM 125 KOM 150 KOM 200 KOM 250 KOM 315 3 7/8 4 7/8 5 7/8 7 13/16 9 13/16 12 3/8 3 1/8 3 15/16 4 1/2 5 11/16 6 1/2 7 1/2 4 3/4 5 1/2 6 1/8 7 5/16 8 1/16 9 1/16 Diagramms of Pressure loss Static Pressure (In. WG) Static Pressure (In. WG) Flow Rate (CFM) Flow Rate (CFM)
It is made of multilayer Aluminum/Polyester laminate strip and corrosion resistant steel helix. It is widely used in professional HVAC systems. This item is very flexible and strong duct. This type can be fitted to round and oval flanges easily. An outstanding temperature and air pressure performance allows it to be used in wide range of applications. Performances Type 605 Inner duct size Film material Wall thickness Outer jacket material Insulation material Temperature range Velocity Positive pressure rating (WG) Negative pressure rating (WG) Standard length Standard colors Ø 312 Aluminum/Polyester laminate 0,003 20 0 F 300 0 F 6000 FPM 16 25 Feet Silver The items distinctive features are: Widely used in HVAC. Excellent flexibility. Self extinguishing.
This duct is made of polyvinylchloride (PVC) film and corrosion resistant steel helix. It is perfect solution for ventilation systems of the residential houses and commercial premises. Use this noninsulated and economically priced flexible connector in medium to low pressure A/C systems and in air venting and drying applications. They can be easily shaped to fit round or oval inlets and connects to fittings fast. Dense, airproof structure with the smooth surface conduces to less pressure loss at friction. www.ventsus.com Performances Type 660 Inner duct size Film material Wall thickness Outer jacket material Insulation material Temperature range Velocity Positive pressure rating (WG) Negative pressure rating (WG) Standard length Standard colors Ø 3 1/2 6 PVC 0,0025 20 0 F 200 0 F 4000 FPM 8 1/2 25 Feet White, Grey The items distinctive features are: Competitive quality and price. High flexibility. High compression value. Self extinguishing. Other colors and length are available on request. This type of ducts may have rectangular channel models as an option.
COMMERCIAL VENTILATION and HEAT RECOVERY VENTILATORS TT VK VKM VKMz VCN VKP VUT mini ACCESSORIES FOR COMMERCIAL VENTILATION Hose clamps KOM Series Polyvent Type 605 Polyvent Type 660 2 4 6 8 10 12 14 18 19 20 21