PNEUMATIC VALVE MANIFOLDS mm - Series 50 M7 or with push-in fittings Ø6 mm Series G3 50 Types MULTIPOL-BUS new 50 D/3D CAD models - In 3D 0056GB-0/R0 6 Manifold assemblies kit (Electronic + End plate) 5-DIGIT PRODUCT CODE G 50 A V 3 H 0 0 V A00 Thread connection G ISO 8/ A00 Standard (no options) 8 NPT (contact us) MUF Muffler in End Plates K Push-in connectors DRM DIN Rail Mount DWM DIN Rail Mount with Muffler in End Plates! No usable for ATEX X External pilot supply from port Product series D External pilot supply from port 50 ( mm valve) and Muffler in End Plates D External pilot supply from port Revision letter and DIN Rail Mount A Initial release F06 External pilot supply from port Muffler in End Plates and DIN Rail Mount Product type V Valve Manifold Assembly ATEX options - (3GD) IP65X - (3GD) IP5X (3G) IP5X Electronics A36 () A () A3 () 8 580 Fieldbus Electronics ( page P579-) D36 () D () D3 () 3 G3 Fieldbus Electronics D38 (3) D (3) D (3) J 5 Pin Sub-D Connector F6 () F8 () F9 () M 37 Pin Sub-D Connector () Internal pilot W/O DIN Rail Mount Q 9 Pin Round Connector () DIN Rail Mount T Terminal Strip -3 (3) External pilot supply from port () External pilot supply from port and Number of Valve Stations DIN Rail Mount D T 0 (ATEX: max. 8) End Plate Style H 8 X V Vertical L 3 8 P 6 7 3 Raccordement des embouts (-3-5) input modules (G3/ATEX) max. coils () 0 8 6 3 0 580 8 5/37 Pin Sub-D -3 Terminal Strip 9 Pin Round Connector Used with the first digit «G» or «8»: /8 (female thread only) Used with the first digit «K»: H 6 x 8 mm (push-in connector) () Max. number of coil under voltage according to input module number. P578-3 F
G3 PLATFORM DISTRIBUTION - G3 50 D/3D CAD models - In 3D w ne 50 Subbases H 50 5-DIGIT PRODUCT CODE A M S M A00 0 Thread connection H Metric thread K Push-in connectors Not use Product series 50 ( mm valve) A00 Standard (No option) Revision letter A Initial release ATEX options 7W Standard (zone or zones -) Product type M Manifold base Z Mid station supply Wiring option M Plug-in Mounting S Manifold base, stations, side port, single Z-Board Port connection B M7 (female thread only) D,7 x mm (5/3) [push-in connector only] (Mid station supply not available) F x 6 mm [push-in connector only] 0056GB-0/R0 M Manifold base, stations, side port, double Z-Board Interface Grand débit P578-
G3 PLATFORM DISTRIBUTION - G3 50 Thread connection R Pad mount Valves 5-DIGIT PRODUCT CODE R 50 A B 0 M A00 F Voltage - class F V DC - class F new 50 Product series 50 ( mm valve) A00 With impulse manual operator B With maintained manual operator M Without manual operator Revision letter ATEX options (zone or zones -) A Initial release 7W With impulse manual operator 8L With maintained manual operator 8A Without manual operator Actuation Electrical interface Rubber packed M Plug-in (with LED indicator / DC) Valve type B Solenoid pilot Function A x3/ NO, dual 3-way D x3/ NC, dual 3-way N 5/, Differential air return 5/, spring return 5/, solenoid air return 5 5/3, W3, open center to exhaust 6 5/3, W, center closed 7 5/3, W, open center to pressure F 0056GB-0/R0 ATEX Thread connection R Pad mount Regulators 5-DIGIT PRODUCT CODE R 50 A R S 5 J A00 0 Not use Interface Pneumatic Product series 50 ( mm valve) H W/O Gauge Revision letter A00 Gauge upper position A Initial release 8V Gauge lower position Product type R Pressure regulator Regulator type S Single regulator - Pressure to port Wiring option J Plug-in Gauge type 0 W/O Gauge Gauge scale (bar) Pressure range 5 0,7 to 8 bar (0 to 5 psi) 8V A00 P578-5
G3 PLATFORM DISTRIBUTION - G3 50 Sandwich shut off block Used to shut-off pressure to the valve which is mounted above it. Allows easy maintenance without the need to shut-off pressure to the whole manifold. 6,5 Sandwich speed control kit ()(5) () () () (3)() 9,35 3,35,5 5,5 6,5 ()(5) () () () (3)()! Usable only for internal pilot supply island 5-DIGIT PRODUCT CODE Description weight (kg) R50AY85000 Sandwich shut off block (double) 0, () () () () (5) () (3) HOW TO ORDER [ATEX options (zone or zones -)] consult our Dynamic Product Modeling Tool on: www.asconumatics.eu Cabinet mounting Montage en fond d armoire 5-DIGIT PRODUCT CODE Description weight (kg) R50AS850000 Sandwich Speed Control 0,055 The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI 36L for 8, or 6 position island configurations. They can be ordered separately or installed directly on the island with or without quick connectors. (If the mounting plate is ordered separately, the valve island with the Integrated Cabinet Mounting option must be ordered.) (8 stations) (8 stations) T H stations T H W 8 8 88,7 7,3 8 88,7 9,3 6 8 88,7 67,3 ports,,,, : M7 /, 3, 5: G /8 Including mounting screws. 3/5 ( stations) HOW TO ORDER consult our Dynamic Product Modeling Tool on: www.asconumatics.eu P578-6 W 3/5 (6 stations) 0056GB-0/R0
PNEUMATIC VALVE MANIFOLDS 6 mm - Series 503 / (G) or with push-in fittings Ø8 to 0 mm Series G3 503 Types MULTIPOL-BUS new 503 D/3D CAD models - In 3D 0056GB-0/R0 6 Kit d assemblage îlot (Electronic + End plate) 5-DIGIT PRODUCT CODE G 503 A V 3 B 0 0 V A00 Thread connection G ISO 8/ A00 Standard (no options) 8 NPT (contact us) MUF Muffler in End Plates K Push-in connectors DRM DIN Rail Mount DWM DIN Rail Mount with Muffler X External pilot supply from port Product series D External pilot supply from port 503 (6 mm valve) and Muffler in End Plates D External pilot supply from port Revision letter and DIN Rail Mount A Initial release F06 External pilot supply from port Muffler in End Plates and DIN Rail Mount Product type V Valve Manifold Assembly End Plate Style V Vertical Electronics 8 580 Fieldbus Electronics ( page P579-) 3 G3 Fieldbus Electronics J 5 Pin Sub-D Connector End Plate Port Size (-3-5) M 37 Pin Sub-D Connector Used with the first digit «G» or «8»: Q 9 Pin Round Connector 3 3/8 (manifold base) T Terminal Strip -3 Used with the first digit «K»: O No Electronics K 8 x 0 mm (push-in connector) M 0 x mm (push-in connector) Number of Valve Stations B N Z 6 D P 6 3 8 F 6 R 8 5 30 H 8 T 0 7 3 J 0 V L X P578-7 F
G3 PLATFORM DISTRIBUTION - G3 503 new 503 D/3D CAD models - In 3D Subbases 5-DIGIT PRODUCT CODE G 503 A M V M A00 3 0 Thread connection Not use G ISO 8/ 8 NPT (contact us) Interface K Push-in connectors Pneumatic high flow ISO 507- (6 mm) Product series 503 (6 mm valve) A00 Standard (internal pilot) X External pilot supply from port Revision letter 56Y -pin straight M connector in mounting A Initial release Standard (internal pilot) 59W External pilot supply from port + -pin straight M connector in mounting Product type M Manifold base Z Mid station supply Wiring option M Plug-in Mounting Port connection (-) S Manifold base, stations, side port, single Z-Board Used with the first digit «G» or «8»: M Manifold base, stations, side port, double Z-Board / V Manifold base, stations, side port NJ Manifold base, stations, side port, single Z-Board, Zoned Power, Second station Used with the first digit «K»: H 6 x 8 mm [push-in connector only] NL Manifold base, stations, side port, double Z-Board, K 8 x 0 mm [push-in connector only] Zoned Power, Second station NN Manifold base, stations, side port, single Z-Board, Zoned Power, First station NP Manifold base, stations, side port, double Z-Board, Zoned Power, First station NK Manifold base, stations, side port, single Z-Board, Zoned Power & Pilot, Second station NM Manifold base, stations, side port, double Z-Board, Zoned Power & Pilot, Second station NQ Manifold base, stations, side port, single Z-Board, Zoned Power, First station, Zoned Pilot Second Station NR Manifold base, stations, side port, double Z-Board, Zoned Power, First station, Zoned Pilot Second Station NS Manifold base, stations, side port, single Z-Board, Zoned Pilot Second Station NT Manifold base, stations, side port, double Z-Board, Zoned Pilot Second Station P578-8 0056GB-0/R0
G3 PLATFORM DISTRIBUTION - G3 503 Thread connection R Pad mount Valves 5-DIGIT PRODUCT CODE R 503 A B 0 M A00 F Voltage - class F V DC - class F new 503 Product series 503 (6 mm valve) Plug-in valves (External piloting) () A00 Standard (No option) With impulse manual operator Revision letter B With maintained manual operator A Initial release M Without manual operator B Internal pilot supply from port Actuation 83B 0 b max. pressure - non UL certified Spool and sleeve 8G B + B Rubber packed 8M B + 83B 8N M + 83B Valve type 8K M + B B Solenoid pilot 8P B + 83B (With impulse manual operator) 69N B + M + 83B 69P B + B + 83B Function A x3/ NO, dual 3-way () Electrical interface D x3/ NC, dual 3-way () M Plug-in (with LED indicator / DC) N 5/, Differential air return () 5/, spring return 5/, solenoid air return 5 5/3, W3, open center to exhaust () 6 5/3, W, center closed () 7 5/3, W, open center to pressure () () () Only with rubber packed version. Used external spool valves (internal/external supply configurated in the end plate kits). For internal piloting, contact us. F 0056GB-0/R0 Regulators 5-DIGIT PRODUCT CODE R 503 A R S J A00 0 Thread connection Not use R Pad mount Interface Pneumatic high flow ISO 507- Product series 503 (6 mm valve) A00 Standard (no options) Revision letter 6N Jumper on end A Initial release 6P Jumper on end M Tamperproof needle cartridge assembly or regulator Product type Wiring option R Pressure regulator J Plug-in Regulator type Gauge type S Single regulator - Pressure to port bar (standard) D Double regulator - Pressure to ports 5 & 3 E Double regulator - Pressure to ports &, without valve T Double regulator - Pressure to ports & 3, pressure selector Pressure range 0,7 to 9 bar 3 0, to bar 0,3 to bar P578-9
Sandwich shut off block G3 PLATFORM DISTRIBUTION - G3 503 Sandwich pressure block Used to shut-off pressure to the valve which is mounted above it. Allows easy maintenance without the need to shut-off pressure to the whole manifold. Used to supply a separate pressure to a single valve station without needing blocking disks. EB B P A XE (3) () () () EA (5) X ()(3) () () () (5) () P() XE (3) () EB B () P () A (5) X EA ()(3) () () () (5) () 6,5 6,5 33 33 58,6 58,6 57,3 8,8! Usable only for internal pilot supply island 5-DIGIT PRODUCT CODE R503AY670700 R503AY670700 Description High Flow - Sandwich shut off block ISO 507- - Sandwich shut off block 5-DIGIT PRODUCT CODE Port Type G503AW830000 G / Description High Flow Sandwich pressure block G503AW8300003 G / ISO 507- Sandwich pressure block Sandwich exhaust block Sandwich speed control kit Used to isolate the exhaust of a single valve station from the manifold. Allows faster exhaust response by re-routing. Exhaust externally to the manifold. 6,5 3 70, 59, 5-DIGIT PRODUCT CODE Port Type Description G503AX830000 G / G503AX830000 G / (3) ()(3) () () () (5)() (5) ()(3) () () () (5)() 33 High Flow Sandwich exhaust block ISO 507- Sandwich exhaust block P578-0 5 33 5-DIGIT PRODUCT CODE R503AS557500 R503AS557500 58 Description High Flow - Sandwich Speed Control ISO 507- - Sandwich Speed Control () () () () (5) () (3) 6 0056GB-0/R0
PNEUMATIC VALVE MANIFOLDS Series 005-035 / ISO 3/8 to (G) or with push-in fittings Ø8 to 0 mm Series G3 005 G3 035 G3 ISO Types BUS 6 3 5 6 Manifold assemblies kit (Electronic + End plate) A K 3 E D 0 0 0 0 3 L STD Electrical/Electronic, Type & location 3 G3 Electronics Valve Series* 0 N/A E 005 Series B 035 Series W ISO 507-8 mm Q ISO (ISO 5599/ size ) R ISO (ISO 5599/ size ) S ISO 3 (ISO 5599/ size 3) Special STD Standard DRM DIN Rail mounting - Not available w/ 035, ISO, ISO, ISO 3 MUF Muffler - Not available w/ ISO, ISO, ISO 3 DWM DIN Rail w/ Muffler - Not available w/ 035, ISO, ISO, ISO 3 End plate Port Type L Push-in Fitting G ISO 8/-G Tap Pressure Ports (ISO8/ Conduit Ports if applicable) F 0056GB-0/R0 Number of valve Stations A I 9 Q 7 Y 5 B J 0 R 8 Z 6 C 3 K S 9 7 D L T 0 3 8 E 5 M 3 U 9 F 6 N V 5 30 G 7 O 5 W 3 6 3 H 8 P 6 X 7 3 * For manifold assembly with multiple valve series - Consult Factory 3 End plate Port Size Series Port Ports 3/5 005 ISO 035 ISO G3/8 G3/8 G/ G/ G3/8 G3/8 G/ G/ 6 ISO 3 G G K 005 0 mm 0 mm Two or more valve groups resulting in different standard end plate port sizes. X P578-
G3 PLATFORM DISTRIBUTION - G3 005-035 - ISO 507-8- mm 005-035 series - ISO 507-8- mm Valves 05 F BB Z6 M L 000 6 Series 05 005 Series 35 035 Series I5* 005 Series ISO 507-8 mm (ISO 0) R5* () 005 Series ISO 507-8 mm (ISO 0) * see the symbols table bellow to verify compatibility with spool valves functions () rubber packed spool Port Size of Base 005 035 Voltage 00 Blank station plate 6 V DC 000 Without option B Locking override M Without manual override Further options on request G /8 or valve w/o manifold X 3 G 3/8 or valve w/o manifold X G / or valve w/o manifold X F 6 mm push-in fitting X H 8 mm push-in fitting X Port Type of Bases O Without base G G thread L Plug-in fittings (except for series 035) Actuator BA Single actuated and spring return, flush non-locking manual override BN ISO 507-: Single actuated and differential return, flush non-locking manual override BB Double actuated, flush non-locking manual override 00 Island w/o valve (blank station) Function 005 035 5-port., -pos. valve X X 5 5-port., 3-pos. valve, open center, dual pressure X X 6 5-port., 3-pos. valve, closed center X X 7 5-port., 3-pos. valve, connected with &, 3 & 5 blocked X D Dual 3-port., -pos. valve NC, NC X E Dual 3-port., -pos. valve NC, NC, vacuum service X P Indicates blank station plate X X 5 3 5 3 5 3 5 3 Ribbon cable option must be used for manifold assemblies that exceed 6 solenoids. (7th and 8th digit of valve order code) I5/I6... 05//35... R5/R6... I5/I6... 05//35... I5/I6... 05//35... BA BN BB BB5 5-ported, -pos. valve, spring return 5-ported, monostable, differential return 5-ported, -pos. valve, detented 5-port., 3-pos. valve, open center, dual pressure P578- Symbols 5 3 5 3 M O 3 5 3 5 Electrical interface Plug-in, DC with LED Blank station plate Mounting 00 Valve unit only 0 With sandwich speed control Z Manifold block with side and bottom ports, single solenoid, Z-Board Z Manifold block with side and bottom ports, double solenoid, Z-Board Z5 Z with speed control Z6 Z with speed control R Z with ribbon cable connector R Z with ribbon cable connector R5 Z5 with ribbon cable connector R6 Z6 with ribbon cable connector N Double Z-board with VDC isolator (005) R5/R6... 05//35... I5/I6... 05/... R5/R6... 05/... 05... BB6 BB7 BBD BBE 5-port., 3-pos. valve, closed center 5-port., 3-pos. valve, connected with &, 3 & 5 blocked Dual 3-port., -pos. valve NC, NC Dual 3-port., -pos. valve NC, NC, vacuum service 0056GB-0/R0
G3 PLATFORM DISTRIBUTION - G3 005-035 - ISO 507-8- mm 005-035 series - ISO 507-8- mm Regulators 05 F ES Z J L 000 00 Series 05 005 Series 35 035 Series I5 005 Series ISO 507-8 mm (ISO 0) Port Size of Base 005 035 G /8 or valve w/o manifold X 3 G 3/8 or valve w/o manifold X G / or valve w/o manifold X F 6 mm push-in fitting X H 8 mm push-in fitting X 000 Standard H 6N 6P 6W 6Y Without gauge Jumper on end Jumper on end Top facing gauge* (005 series) Extended gauge* (005 series) 63D 6W + 6Y* (005 series) * see note below Further options on request O Q K Port Type of Bases Without base G thread Plug-in fittings Regulator Type ES Single pressure to port ED Dual pressure to ports 3 and 5 EC EQ Dual pressure with non-relieving checks (035 series) Dual pressure with relieving checks (035 series) EE Dual pressure to ports and ET Two-pressure selector 0,7 to 9 bar 3 0, to bar 0,5 to bar Pressure Range Ribbon cable option must be used for manifold assemblies that exceed 6 solenoids. (7th and 8th digit of valve order code) J Wiring Option Plug-in receptacle Mounting 005 035 00 Without base X X 0 With sandwich speed control X X Z0 Manifold block with side and bottom ports, Z-Board, used with EE regulator Z Manifold block with side and bottom ports, Z-Board single actuated X X Z Manifold block with side and bottom ports, Z-Board double actuated X X Z5 Z with speed control X X Z6 Z with speed control X X R Z with ribbon cable connector X X R Z with ribbon cable connector X X R5 Z5 with ribbon cable connector X X R6 Z6 with ribbon cable connector X X X F 0056GB-0/R0 5 3 Single pressure from a single supply 5 3 5 3 Symbols ES ED EC (0-035) EQ (0-035) Relieving: exhausts pressure in cylinder if upstream pressure is exhausted Dual pressure from a single supply 5 3 EE 5 External outlet regulator used with jumper plate for single or dual pressure 3 5 3 Non-relieving: taps downstream pressure if upstream is exhausted 5 3 ET Two-pressure selector used for multi-pressure applications Note (005 series): Regulator gauges must be offset on alternating stations to prevent interference (see photo) Odd numbered stations will use either standard (no option) or top facing ( 6W option) gauges. Even numbered stations will use either extended standard ( 6Y option) or extended top facing ( 63D option) gauges. P578-3
G3 PLATFORM DISTRIBUTION - G3 ISO 5599/ Size 3 ISO 5599/ Size 3 Valves I BA 5 M Q 000 6 Series and Port Size I* ISO 5599/ Size / I3 ISO 5599/ Size 3/8 I3* ISO 5599/ Size 3/8 I ISO 5599/ Size / I3* ISO 5599/ Size 3 / I35 ISO 5599/ Size 3 3/ * Use for valve unit only First letter "" Actuator Second letter "" Actuator BA Single solenoid pilot actuated valve with spring control BB Double solenoid pilot actuated valve locking BW Single solenoid pilot actuated valve with differential air return (ISO + ISO 3 series only) SA Single direct solenoid actuated valve with spring return SS Double direct solenoid actuated valve locking 00 Valve without manifold block Voltage 00 Blank station plate 6 VDC* * cannot be used with direct solenoid actuated Valves of ISO 3 Series 000 Standard B Flush manual override Z Extended locking manual override B Internal pilot supply from port if not standard C* Internal pilot supply from port 3 D* Internal pilot supply from port 5 5G 5 pin mini connector (valve conduit cover) X* External pilot supply through base or manifold end plates * must use one of these options when used with RC, RQ or RD regulators and solenoid pilot valves. Function 5-port., -pos. valve 5 5-ported, 3-pos. valve, blocked, & exhausted 6 5-ported, 3-pos. valve, all ports blocked 7 5-ported, 3-pos. valve, connected with & P Blank station plate Mounting 00 Valve unit only 0 00 with speed control MS Midstation supply and exhaust block with "Z-Board" Z Manifold block with side and bottom ports, single "Z-Board" Z* Manifold block with side and bottom ports, double "Z-Board" Z5 Z with speed control Z6 Z with speed control R Z with ribbon cable connector R Z with ribbon cable connector R5 Z5 with ribbon cable connector R6 Z6 with ribbon cable connector *also used with function P blank station P578- G Q M O Port Type G-thread (direct solenoid valves) G-thread (solenoid pilot valves) Wiring Option Plug-in VDC with LED indicator Blank station plate Note: Internal pilot supply from port is standard for all ISO 5599/ valve series. 0056GB-0/R0
G3 PLATFORM DISTRIBUTION - G3 ISO 5599/ Size 3 ISO 5599/ Size 3 Regulators I RS 5 J P 000 00 Series and Port Size I* ISO 5599/ Size / I3 ISO 5599/ Size 3/8 I3* ISO 5599/ Size 3/8 I ISO 5599/ Size / I3* ISO 5599/ Size 3 / I35 ISO 5599/ Size 3 3/ * Use for valve unit only Regulator Type RS Single pressure to port RD* Dual pressure to ports 3 and 5 RC* Dual pressure with non-relieving checks air return (ISO and ISO 3 series only) RQ* Dual pressure with relieving check valves RE Dual pressure, external outlet * Solenoid pilot valves used with RC, RD or RQ regulators must have the pilot supply from other than internally from port. Pressure Range 0,7 to 9 bar 3 0, to bar 0,3 to bar 6 to 7 bar 000 Standard H Without gauge 6N Jumper on end 6P Jumper on end Further options on request Port Type Q G-thread (ISO, ISO and ISO 3 Series) Wiring Option J Plug-in receptacle 0 No electrical connection Mounting 00 Regulator unit only 0 00 with speed control Z Manifold block with side and bottom ports, single Z-Board Z Manifold block with side and bottom ports, double Z-Board Z5 Z with sandwich speed control Z6 Z with sandwich speed control R Z with ribbon cable connector R Z with ribbon cable connector R5 Z5 with ribbon cable connector R6 Z6 with ribbon cable connector F 0056GB-0/R0 P578-5
FIELDBUS SYSTEMS Series G3 Electronics Types G3 MULTIPOL-BUS G3 Electronics G3 EP 00 R 0 STD Number of I/O Modules 00 0 0 0 03 3 0 05 5 06 6 07 7 08 8 09 9 No 0 0 3 3 5 5 6 6 D H! modules max. per bloc. STD DRM E3 E8 E0 G3 G33 G3 G36 J3 7W D5 D6 F0! usable for ATEX Special Standard DIN Rail Mounting Fieldbus assembly without valves Valve Side 5 pin Sub D NPN output module Auto recovery Module (ARM) DRM-Din Rail Mounting E0-Auto Recovery Module (ARM) DRM-Din Rail Mounting E8- Valve Side 5 pin Sub D NPN output module E8-Valve Side 5 pin Sub D NPN output module E0-Auto Recovery Module (ARM) E3-Fieldbus assembly without valves DRM-Din Rail Mounting DRM-Din Rail Mounting E8-Valve Side 5 pin Sub D NPN output module E0-Auto Recovery Module (ARM) ATEX options Version ATEX 7W + DRM-DIN Rail Mounting 7W + E3-Fieldbus assembly without valves 7W + E3-Fieldbus assembly without valves + DRM-DIN Rail Mounting Left Mounting w/ Backplane extension Out w/ Terminating Resistor 0 Modification Initial release ARM! W CH ARN AR ING GIN : P G H OT AZ ENT AR IA D- LE SE LEC E I TR NS O TR STA UC TI TIO C NS No usable for ATEX WA R PL NING UG : S A DO ND NO SO T C CK ON ET NE S W CT HE OR N E DI NE SCO RG NN IZE EC D T ATEX 5 XX IP6 65 Gc c IP T D llc 5 C - E na T8 US Ex lc OF G tc ll ll 3 Ex IONS IT D ND NS ll 3 IC COCTIO ECIF RU : SPE INST NING - SE WAR AL N r RI SE x Ma ar Ye n.. file Te ch T b tio ref Op C ce am an x de ce 7 BP P578-6 8 Lu Ce Fr P. -8 ba 0056GB-0/R0 Electronics Protocols CO CANopen DL DeviceLogix DN DeviceNet EC EtherCAT ED EtherNET/IP DLR EM ModBus /TCP EP EtherNet/IP PL POWERLINK PT PROFIBUS-DP PN PROFINET DS Backplane extension Valve Manifold DS3 Backplane extension I/O Assembly
G3 PLATFORM DISTRIBUTION Ordering Valve Island Assemblies with G3 Electronics & Discrete I/O For valve series 50, 005, 503, 035, ISO507- & ISO 5599/ 6 (50 shown) 6 3 5 6 (005 shown) (503 shown) 6 F 0056GB-0/R0 Shaded components are described by the assembly kit (AK) model number. The communication module and number of I/O modules are described by the Electronic Interface (G3) model number designation. [see page 6] Each valve station is listed in sequential order from left to right when facing the port side of the manifold as shown. Each discrete I/O module is listed in sequential order from RIGHT to LEFT starting from the communication module as shown. NOTE:. A total of 3 solenoid outputs are available. Either 3 single solenoid valves or 6 double solenoid valves or any combination of singles and doubles not to exceed 3 outputs can be specified.. For manifold assemblies that exceed 6 solenoids, the assembly MUST be configured so that an even number of solenoids are utilized prior to the station using the ribbon cable feature. The 6th and the 7th solenoids cannot be on the same valve. Example Order - 005 shown Assy Kit AK3EP00003LMUF Station 05BBZML0006 Station 05BBZML0006 Station 3 05BBZML0006 Station 05BBZML0006 Station 5 05BBZML0006 Station 6 05BBZML0006 Station 7 05BBZML0006 Station 8 05BBZML0006 Station 9 05BBRML0006 Station 0 05BBZML0006 Station 05BBZML0006 Station 05BBZML0006 Station 3 05BBZML0006 Station 05BBZML0006 Station 5 05BBZML0006 Station 6 05BBZML0006 Electronics G3DN6R0E0 Station 0-05 Station 0-05 Station 5 0-05 Station 6 0-05 P578-7
G3 PLATFORM DISTRIBUTION Ordering G3 Electronics Assemblies with I/O Only 6 Example Order - I/O assembly with Backplane extensions in and backplane extension out modules Electronics G3DS36D0STD Station 0-05 Station 0-05. Refer to the selection table to specify the control electronics and I/O configuration. [see page 6]. Each discrete I/O module is listed in sequential order from RIGHT to LEFT as shown. 3. A maximum of 6 I/O modules are supported by a single communication node. Analog I/O & digital I/O (NPN & PNP) Station 5 0-05 Station 6 0-05 P578-8 0056GB-0/R0