Vision To be an integrated national company to build Indonesian for support drilling industries Mission * To satisfy our costumers, employees, and society with trust, dedication, and performance * To strengthen our competitive by continuously improving our cost effectiveness * To carry drilling operation services for Indonesia with standard OSHE (Occupation Safety Health and Environment)
The Advantages of Using Top Drive * The complete system including the top drive, torque system and power unit can be installed in less than one day. In most cases, no rig modifications are necessary. * The HCI offers an expanded suite of pipe-handling functions including elevator link-tilt, and extend/retract feature for making mousehole connections (maximum extension 60 in.), 360 pipe-handler rotation, and grabber. The HCI grabber acts as a back-up tong for making or breaking connections and will accommodate tool joints from 3 in. to 8-3/4 in. OD. * Tesco s unique quill design allows rapid field removal for inspection or replacement without draining the gear case. * The HCI is equipped with an independent diesel engine or traction motor. * A double ball mud saver/safety valve is incorporated into the system design. * The speed/torque ranges are selectable from the driller s console. * The HCI track/torque bushing configuration is simple to install and requires minimal maintenance. * The entire HCI can be transported in three standard 20 ft. sea containers.
HCI 1205 (with optional integrated swivel) Rated Capacity 500/650 ton 454/590 tonne Rated Power 1,205 hp 900 kw Weight (with integrated swivel) 19,300 lbs 8,770 kg Weight (without swivel) 12,300 lbs 5,590 kg Operating Length (incl. 9 links & elevators & with integrated swivel) Operating Length (incl. 9 links & elevators & without swivel) 20 ft 6,096 mm 14.3 ft 4,360 mm Width 47.25 in 1,200 mm Max. Drill Torque (2.76:1 gear ratio) 52,800 ft-lb 7,158 dan-m Make-up Torque (2.76:1 gear ratio) 52,800 ft-lb 7,158 dan-m Breakout Torque (2.76:1 gear ratio) 59,400 ft-lb 8,053 dan-m Max. Speed (2.76:1 gear ratio) 210 RPM 210 RPM Quill ID 2.5 in 63.5 mm Power Unit (DD16V 2000) Weight (approximate) 36,000 lb 16,400 kg Length (c/w hose reel) 35 ft 10,670 mm Width 6.25 ft 1,910 mm Top Drive Notes: Weight includes top drive, pipe handler and torque bushing. The HCI can also be equipped with optional 500 or 650 ton integrated swivel. The top drive can be fitted with an optional 2.33:1 gear ratio. Smaller critical dimensions are possible in some configurations detailed rig measurement required. Power Unit Notes: Other power unit options are available. Power unit workshop containers and stacking kits are also available.
1. PT. PERTAMINA GEOTHERMAL ENERGY Kamojang 81 & 82 Lumut Balai 1/1 Lumut Balai 1/1 Lumut Balai 1/1 Lahendong 31 Lahendong 32 Lahendong 35 Lahendong 25 Lahendong 27 Lahendong 34 Lahendong 7.3 2. PT. GEOLINK NUSANTARA Babelan 01 Bambu Gunung 01 3. PT. RADIANT UTAMA Hululais B1 Hululais C1 4. PT. ASIA PETROCOM SERVICES Tiaka 11 Tiaka 12 Tiaka 13 5. PT. APEXINDO PRATAMA DUTA Tbk. Cataka 1
Rigs Roda Drilling Nusantara (RDN) is a global land drilling contractor, the Company conducts oil, gas and geothermal land drilling operations in Indonesia. Roda Drilling Nusantara (RDN) is a provider of offshore platform workover and drilling rigs, and actively markets 4 (four) platform rigs and 2 (two) top drives located in Indonesia. Today Roda Drilling Nusantara (RDN) offers the widest range and variety of Rigs systems in the world, providing you with the best selection of models to fit your specific drilling and work over needs. Our Rigs are all made in united states and are mostly build circa 1980-1985. Our Rigs were owned and operated by PT Daya Alam Teknik Indonesia (DATI) up intil 1999 before it was taken by Roda Drilling Nusantara (RDN) completely on 2007. To this day, RDN oil rigs had lready been used at various location on Pertamina and PSC oil and gas field throughout Indonesia. Rigs Specification Most of our rigs are mostly have 20,000 feer Depth Capacity. Drawworks Manufacturer : OIME Model : TBA - 2000 Mechanical Rated Input : 2000 HP Input Power : 1800 Auxiliary Brake : Parmac 342A hydromatic brake Mast Manufacturer : Parco Model : HH - 636-80 Height : 136 Rated Capacity : 800,000 Rotary Capacity : 680,000 Racking Capacity : 20,000 Turbular Handling Equipment : Varco SSW - 10 Pipe Spinner Crown Block Manufacturer : PARCO Main Cluster : 6 x 48 Fast Line : 54 Line Size : 1 1/4 Safety Device : Duo-Matic Rotary Table Make : OIME Model : 27,5 Driven by drawworks
Master Bushings : MSPC Static Load Ratings : 570 Ton Input Power Four (4) Cummins KTA 11150 diesel engines, 600 HP Intermittent 525 HP each continuous. Total Power : 2100 Engines RPM : 1800 Power Generations : Two (2) Cummins G19 engines with Kamang generators Power Output : 365 KW each Volts : 240 V MCC House : Square D 120/240 Volt Panel Substructure : Make : Parco Floor Height : 21 Setback Load : 520,000 Casing Load : 680,000 Solids Control/Mud Handling Nine x 120 bbl mud pits covered with steel roof sections and serrated grating walkways, stairs and railings. Three 5 x 6 Mud Mixing and supercharging pumps driven by CAT disel power coupled to a distribution manifold for multi function use. One 55 bbl trip tank. Three derrick High Speed flow line cleaners Demco 12 x 3 cone desander, 5x6 pump, diesel powered. Oiltools 4 x 16 cone desilter, 5x6 pump, diesel powered. Seven Brand MA - 10 agitators Blowout Prevention Equipment Shaffer 21 1/4-2m annular preventer with accessories for a diverter system. Shaffer 13 5/8-5m annular preventer with three shaffer single ram BOP s with hub connections. Drilling Spools, adapter spools, valves and choke manifold to suit above BOPE and pressure ratings. Accumulator Unit Koomey Model T15240-3S, 5 Station 3000 psi ratings complete with air operated GARC5 remote control station located at drillers position. Includes 15 HP triplex charging pump, two air operated pmps and a 20 bottle manifold. Mud Pumps Three (3) 700 HP OIME triplex mud pumps, independent drive w/2 each KTA 1150 cummins engines through Allison 6061 transmissions. One (1) 700 HP OIME triplex pump, compound driven Charging Pumps : 3 only 5 x 6 Magnum series each driven by a cat D3304 diesel motor. Liner Size available.
Rigs (Continued from Page 13) Mixing Equipment Two Demco style mixing hoppers. One on active system, one on reserve system. Seven Brandt MA - 10 agitators Low Pressure bottom stir guns Air Compressors Two Quincy compressors with 20 HP electric motors.
Award Winning Based on our Rig latest inspection and which had been done well for 2(two) wells in Kamojang on January 2008, RDN won for BEST PERFORMANCE from PGE (Pertamina Geothermal Energy). Below are the list of the company who won the best performance based in order : Winner for Best Performance in order: 1. PT. Roda Drilling Nusantara : 53 Pts 2. PT. Bina Karindo : 45 Pts 3. PT. DATI : 42 Pts 4. PT. ETP : 18 Pts 5. PT. DU : 6 Pts Working Experience: DRILLING WELLS : 1. KAMOJANG 81 2. KAMOJANG 82 3. LAHENDONG 31 4. LAHENDONG 32 5. LAHENDONG 35 6. LAHENDONG 25 7. LAHENDONG 7.3 WORK OVER : 1. LAHENDONG 34 2. LAHENDONG 27 2008 Best Performance Award from PGE
Corporate Commitment
SAFETY POLICY Roda Drilling Nusantara (RDN) provides drilling services, project management and rental tools that are vital to vibrant world economy; and in doing so, we conduct our business in a manner that protect the communities where we live, work and play. The health and safety of our employees and their families, our neighbors and the communities where we operate are among the highest priorities for our company. Safety and environmental responsibility are an integral part of our culture, and these value drive improved quality in every aspect of our operations.roda Drilling Nusantara is to comply with all occupational health, safety and environmental laws and develop the best feasible operating procedures, technologies, and policies. In addition, RDN expects that each employee will have this same commitment to safety excellence.
Equipment (Stripping Process)
From left to right : 1. Power Unit 2. Top Drive with Integrated Swivel 3. Tank Assembly, Main Panel & Oil Cooler 4. Hose Reel 5. Driller s Panel
PT. RODA DRILLING NUSANTARA Address : Jl. Penjernihan 2 No. 3C, Bendungan Hilir, Tanah Abang Jakarta Pusat 10210 Telephone : (+6221) 5793 9313 Faximile : (+6221) 5790 2998 E-Mail : office@rdn.co.id