EC TYPE-EXAMINATION CERTIFICATE

Similar documents
EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

This is to certify: Application : Certificate No: TAA00000FJ. That the Miscellaneous. with type designation(s) K-Bridge and K-Nav system platforms

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

TYPE APPROVAL CERTIFICATE

History. The world s first commercial. ARPA system. BridgeLine-2000 DataBridge-2. BridgeLine-10. K-Bridge. KONGSBERG July 27, 2008

TYPE APPROVAL CERTIFICATE

Technical Information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE

Navis NavDP 4000 Series

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE

Kongsberg Maritime Simulation and Training. The power to excel in Dynamic Positioning training

EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE

Evaluation Certificate

Approval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section

N-03 STEERING GEAR CONTROL SYSTEMS

TYPE APPROVAL CERTIFICATE

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

Marine product guide. Engines and generator sets

TYPE APPROVAL CERTIFICATE

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

How to get started. with. Kongsberg XP Auto systems. Serial number: Please Read This First

TYPE APPROVAL CERTIFICATE

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

TYPE APPROVAL CERTIFICATE

EC Type-Approval Certificate UK 2655 Revision 2

Approved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.

Chain-saws (combustion engine powered)

Marine product guide. Engines and generator sets

TYPE APPROVAL CERTIFICATE

DNVGL-CP-0110 Edition March 2016

IMO fuel oil consumption data collection system

1883 B INFORMATION. CERTIFICATES FOR LOW-FLAME SPREAD CHARACTERISTICS (type approvals) a ten sheet issue August 2006 revision of July 2006

EC Type-Approval Certificate UK2853 Revision 4

ST. VINCENT AND THE GRENADINES

The Council Directive 2009/23/EC on non-automatic weighing instruments.

E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1

TYPE APPROVAL CERTIFICATE

OIML CERTIFICATE OF CONFORMITY

TYPE APPROVAL CERTIFICATE

RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE

TYPE APPROVAL CERTIFICATE

ANNEX 3. RESOLUTION MEPC.278(70) (Adopted on 28 October 2016)

This is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units

Hydrography Integrated Systems and Platforms

Tillers Motor hoes (combustion engine powered)

CREATING PROGRESS. General sales specification. Triton-SG. Steering Gear System. Scana Mar-El AS

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE

Hedge trimmers (combustion engine powered)

Report No.: Name of Ship: Plans referred during Initial Survey:

Certificate of EC type-approval of a measuring instrument Number: UK 2489 Revision 4

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

Parts Certificate Certificate for a part of a measuring system for LOTW

This is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units

EUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2

Information Notice (rev3) DEPARTMENT OF MARINE SERVICES AND MERCHANT SHIPPING (ADOMS) Ballast Water Management

Ride-on lawnmowers (combustion engine powered)

LNG: Legal and regulatory framework. Canepa Monica World Maritime University

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL

NAVITRON SYSTEMS LTD NT921 MKII SMALL VESSEL AUTOPILOT

TYPE APPROVAL CERTIFICATE

ToughPIX 2300XP Series INSTRUCTIONS FOR SAFE OPERATION

CATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw

Guideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society

Silvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W peak output power

TOPAS 2130A (Draft v3)

Compact Heat Meters. Features. -A Pulsed output. -B M-Bus output. Accessories. UK Sales Tel: International Tel:

Steel Spline Joint Bulkheads Junction: B-0 Class FIPRO MS 16 mm steel spline No x3 mm Construction: free-standing Sound reduction: 29 db (estima

Three-phase motors for marine use

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2

BLU SERIES Battery Load Units

Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society

KYSTDESIGN SUPPORTER Work Class ROV

ST. VINCENT AND THE GRENADINES

Installation Instructions

EU RO Mutual Recognition Technical Requirements

Reference: C.N TREATIES-2 (Depositary Notification) DRAFT RULE NO. 1

AIR LUBRICATION SYSTEM INSTALLATION

RESOLUTION MEPC.181(59) Adopted on 17 July GUIDELINES FOR PORT STATE CONTROL UNDER THE REVISED MARPOL ANNEX VI

PJC321, PJC322 PJC321-L, PJC322-L PJC321-MCL2, PJC322-MCL2 S-link Control Panel

HISTORICAL DEVELOPMENT OF DYNAMIC POSITIONING

NOTE Please read this Operating Manual carefully before first using the device and strictly adhere to the instructions!

Serbia. Website Ministry of Construction, Transport and Infrastructure. Contact points Flag State

TCM-2 Thyristor DATA Control SHEETModule DATA SHEET. TCM-2 Thyristor Control Module

MARINE. Drives and motors for electrically driven deck machinery and offshore winches

ANNEX 8 RESOLUTION MEPC.102(48) Adopted on 11 October 2002 GUIDELINES FOR SURVEY AND CERTIFICATION OF ANTI-FOULING SYSTEMS ON SHIPS

JUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")

ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions

(Text with EEA relevance)

English version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface

TYPE APPROVAL CERTIFICATE

Integrated Solutions for LNG operations. Kongsberg Maritime

Update notice. General safety. Type code key. Update notice 1

LOW VOLTAGE WIND CONVERTERS. ABB wind turbine converters ACS880, 800 kw to 8 MW

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

Rule No. 1. Scope Definitions Periodicity of technical inspections Technical inspection Inspection requirements...

GUIDELINES FOR PORT STATE CONTROL UNDER MARPOL ANNEX VI

Transcription:

<0> DET NORSKE VERITAS EC TYPE-EXAMINATION CERTIFICATE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive 2009/26/EC, issued as "Forskrift om Skipsutstyr" by the Norwegian Maritime Directorate. This Certificate is issued by Det Norske Veritas under the authority of the Government of the Kingdom of Norway. CERTIFICATE NO. MED-B-6546 This is to certify that the Heading control system (HCS) with type designation(s) K-Pos Heading Control System Manufacturer Kongsberg Maritime AS KONGSBERG, Norway is found to comply with the requirements in the following Regulations/Standards: Annex A.1, item No. A.1/4.16 and Annex B, Module B in the Directive. SOLAS 74 as amended, Regulation V/18 & V/19, IMO Resolution A.342 (IX) & A.694(17) and IMO Resolution MSC. 64(67) Annex 3 & 191(79) Further details of the equipment and conditions for certification are given overleaf. Høvik, 2010-11-26 for Det Norske Veritas AS This Certificate is valid until 2015-11-26 Notified Body No.: 0575 Head of Department DNV local office: DNV Sandefjord Roger Lauritsen Surveyor The Certificate is subject to terms and conditions overleaf. Any significant changes in design or construction of the product, or amendments to the Directive or Standards referenced above may render this Certificate invalid. The product liability rests with the manufacturer or his representative in accordance with Council Directive 96/98/EC, as amended. The Mark of Conformity may only be affixed to the product and a Declaration of Conformity may only be issued when the production/product assessment module referred to in the council directive, is fully complied with. Form No.: MED.Ba Issue: April 2010 Page 1 of 7

Product description See Appendix. For latest revision of the Appendix, see http://exchange.dnv.com/tari Applications/Limitations See Appendix. Type Examination documentation See Appendix Tests carried out Performance testing, ISO 11674 (2006) Environmental testing, IEC 60945 (2002) Serial interface testing, IEC 61162-1 (2007) Presentation testing, IEC 62288 (2008) Marking of product The Manufacturer and Type Designation to be applied to the equipment in a clearly visible location and in addition the equipment shall be marked with serial number, safe distance to magnetic compass, power consumption and/ or supply voltage. Mark of Conformity The manufacturer is allowed to affix the Mark of Conformity according to Article 11 in the Council Directive 96/98/EC on Marine Equipment and shall issue a Declaration of Conformity, only when the module D or E or F of Annex B in the same directive is fully complied with. Module D: Module E: Module F: The quality system for production and testing shall be approved by the Notified Body. The quality system for inspection and testing shall be approved by the Notified Body. Compliance of the products to type as described in this EC Type-Examination Certificate must be verified by the Notified Body who also shall issue a Certificate of Conformity. USCG Approval An U.S. Coast Guard approval number will be assigned to the equipment when the production module has been completed and will appear on the production module certificate (module D, E or F), as allowed by the "Agreement between the United States of America and the EEA EFTA states on the mutual recognition of certificates of conformity for marine equipment" signed 17 October 2005. Form No.: MED.Ba Issue: April 2010 Page 2 of 7

Product description APPENDIX REV. NO. 4 (PAGE 1 OF 5) K-Pos Heading Control System consisting of the following components: Main processing unit: DPC Dynamic Positioning Controller with process unit(s) (RCU502 or RCU501 for SW 8.2.x /8.1.x or RCU501 for SW 7.1.x) Note: The term DPC-11 K-Pos DP Controller or DPC-21 K-Pos DP Controller is used to indicate that associated upgrade kit from SDP to K-Pos has been used. "DPC" is included in ADP701 K-Pos OS and in ADP702 K-Pos OS. cc Compact Controller with process unit (RCU502 or RCU 501 for SW 8.2.x/8.1.x or RCU501 for SW 7.1.x) Operating Station/Terminal: K-Pos OS Operator Station for K-Pos DP/DPM/PM (including built-in versions) Note: The prefix SN96, KS-01, KS-03, KM-04 or KNC-620 is used to indicate that associated upgrade kit from SDP to K-Pos has been used. The terms ADP701 K-Pos OS and ADP702 K-Pos OS indicate that associated upgrade kit from ADP to K-Pos has been used. The ADP701 K-Pos OS and ADP702 K-Pos OS also include the "DPC". K-Thrust OS Operator Station as part of Thruster Control (including built-in versions) K-Master Operator station for DP TCP Computer : Matrix MXE-5104 or MP8300 Base Model Application server for DP : MP8300 Base Model Main Display Server : MP8300 Matrox Extio Model Network units : HP 3600 El.switch JG299A or HP 3600 El.switch JG303A w/fibre USB extender : Veinland USB Extender VL-66199-T/R Power unit : Phoenix Contact QUINT-PS/1AC/24DC/10 Operator interface : Display 13.3 TCP, K-Master units (Heading Wheel, Joystick, Alarm Panel, Utility Panel, I/O Controller), COP-05 Standalone Trackball Main display : Display LCD MD27 Mk2 or MD26 16:10 ECDIS Mk2 (if installed with K-Bridge) cpos OS Operator Station cjoy OT Operator Terminal for cjoy cjoy DP-OT Remote DP Operator Terminal (additional operating terminal) Note: For detalis referring to approved HW see Type Approval Hardware List and Maintenance manuals. Software version DP basis release 7.1, update 14 onwards DP basis release 8.1, update 3 onwards DP basis release 8.2, update 0 onwards K-Master release 2.0, update 0 onwards Applications/Limitations The Operating system is MS Windows XP or Windows 7 (release/update and computer dependent). Environmental testing, IEC 60945. The equipment is tested with respect to category protected. For Phoenix Contact QUINT-PS/1AC/24DC/10, reference made to certificate listed in type examination documentation. Form No.: MED.Ba Issue: April 2010 Page 3 of 7

APPENDIX REV. NO. 4 (PAGE 2 OF 5) Type Examination documentation DNV No. Description 10140 Certificate: A-12371, ISIC Monitors 10141 Certificate: A-12636, MP8200 10188 Certificate: A-13369, ISIC Monitors 10251 Certificate: A-13519, ISIC Monitors 10229 Certificate: E-12869, Quint PS 10204 Certificate: GL 61998-14HH, Veinland USB extender via CAT Type VL66199-T/R 10059 Declaration of Conformity for JH20T06 KMD and JH23T02 KMD 10042 General Arrangement DPC-1 / 2 Cabinet, Doc. No. 302199/B 10088 General Arrangement DPC-3 Cabinet, Doc. No. 302152/B 10217 Hardware Module Description: Display MD26 16:10 ECDIS Mk2. Doc. No. 386376/A 10223 Hardware Module Description: K-Master Alarm Panel. Doc. No. 348019/B 10226 Hardware Module Description: K-Master DP and IJS Joystick. Doc. No. 348031/A 10227 Hardware Module Description: K-Master DP Joystick. Doc. No. 348032/B 10224 Hardware Module Description: K-Master Heading Wheel. Doc. No. 348024/A 10225 Hardware Module Description: K-Master I/O Controller. Doc. No. 348029/A 10212 Hardware Module Description: K-Master Matrix MXE-5104 Computer. Doc. No. 349892/A 10228 Hardware Module Description: K-Master Touch Control Panel 13.3" HD 13T21 KMD-DR1-CORx. Doc. No. 349793/D 10230 Hardware Module Description: K-Master Utility Panel. Doc. No. 348026/A 10222 Hardware Module Description: USB Extender VL-66199-T/R. Doc. No. 391204/A 10207 Hatteland Statement 100984-8 for K-Master 13,3" and 8" TCP`s 10101 HP DVD PR595A Product Declaration 10191 Interface Manual: K-Pos Interface Manual. Doc. No. 300967/C 10234 KM Statement, K-Master console test statement (KMX FWD Centre Console). Doc. No. 391778/A 10235 KM Statement, K-Master joystick test statement (K-Master 1 and 3 button joystick). Doc. No. 394658/A 10233 KM Statement, K-Master Pilot Chair test statement (K-Master Pilot Chairs). Doc. No. 391995/B 10216 KM Statement: K-Master Workstation, Vibration Test Statement. Doc. No. 368822/B 10114 Maintenance Manual: ADP701 K-Pos Operator Station. Doc. No. 335551/B 10115 Maintenance Manual: ADP701 K-Pos Operator Station. Doc. No. 335551/C 10166 Maintenance Manual: ADP701 K-Pos WS Mk3 Operator Station. Doc. No. 389470/B 10116 Maintenance Manual: ADP702 K-Pos Operator Station. Doc. No. 331274/D 10117 Maintenance Manual: ADP702 K-Pos Operator Station. Doc. No. 331274/E 10167 Maintenance Manual: ADP702 K-Pos WS Mk3 Operator Station. Doc. No. 389473/B 10118 Maintenance Manual: DPC-11 K-Pos DP Controller. Doc. No. 324151/D 10119 Maintenance Manual: DPC-11 K-Pos DP Controller. Doc. No. 324151/E 10120 Maintenance Manual: DPC-21 K-Pos DP Controller. Doc. No. 324150/D 10121 Maintenance Manual: DPC-21 K-Pos DP Controller. Doc. No. 324150/E 10123 Maintenance Manual: KM-04 K-Pos Mk2 Operator Station. Doc. No. 371546/A 10122 Maintenance Manual: KM-04 K-Pos Operator Station. Doc. No. 324157/C 10173 Maintenance Manual: KM-04 K-Pos WS Mk3 Operator Station. Doc. No. 389486/B 10221 Maintenance Manual: K-Master Forward Bridge. Doc. No. 389327/A 10218 Maintenance Manual: K-Master Pilot Chair. Doc. No. 387155/C 10249 Maintenance Manual: K-Master Server Cabinet (600x1600x600). Doc. No. 359344/G 10242 Maintenance Manual: K-Master Workstation. Doc. No. 349893/G 10144 Maintenance Manual: KNC-620 K-Pos Operator Station. Doc. No. 365894/A 10145 Maintenance Manual: KNC-620 K-Pos Operator Station. Doc. No. 365894/B 10170 Maintenance Manual: KNC-620 K-Pos WS Mk3 Operator Station. Doc. No. 389479/B 10236 Maintenance Manual: K-Pos, cpos and cjoy, cover and contents. Doc. No. TA-KPOS-2006-MM-CC_S 10124 Maintenance Manual: KS-01 K-Pos Mk2 Operator Station. Doc. No. 371542/A 10125 Maintenance Manual: KS-01 K-Pos Operator Station. Doc. No. 324153/C Form No.: MED.Ba Issue: April 2010 Page 4 of 7

APPENDIX REV. NO. 4 (PAGE 3 OF 5) Type Examination documentation continues 10171 Maintenance Manual: KS-01 K-Pos WS Mk3 Operator Station. Doc. No. 389482/B 10127 Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in Mk2 Operator Station. Doc. No. 371548/A 10126 Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in Operator Station. Doc. No. 324159/C 10174 Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in WS Mk3 Operator Station. Doc. No. 389488/B 10129 Maintenance Manual: KS-03 K-Pos Mk2 Operator Station. Doc. No. 371544/A 10128 Maintenance Manual: KS-03 K-Pos Operator Station. Doc. No. 324155/C 10172 Maintenance Manual: KS-03 K-Pos WS Mk3 Operator Station. Doc. No. 389484/B 10131 Maintenance Manual: SN96 K-Pos Built-in Mk2 Operator Station. Doc. No. 372349/A 10182 Maintenance Manual: SN96 K-Pos Built-in Operator Station. Doc. No. 325455/E 10169 Maintenance Manual: SN96 K-Pos Built-in WS Mk3 Operator Station. Doc. No. 389477/B 10133 Maintenance Manual: SN96 K-Pos Mk2 Operator Station. Doc. No. 372348/A 10183 Maintenance Manual: SN96 K-Pos Operator Station. Doc. No. 325452/E 10168 Maintenance Manual: SN96 K-Pos WS Mk3 Operator Station. Doc. No. 389474/B 10161 Operator Manual: cjoy DP-OT, Remote DP Operator Terminal (Release 8.2). Doc. No. 385583/A 10177 Operator Manual: cjoy DP-OT, Remote DP Operator Terminal. Doc. No. 322286/E 10184 Operator Manual: cjoy DP-OT, Remote DP Operator Terminal. Doc. No. 358764/D 10162 Operator Manual: cjoy OT, Joystick System (Release 8.2). Doc. No. 385585/A 10178 Operator Manual: cjoy OT, Joystick System. Doc. No. 322287/E 10185 Operator Manual: cjoy OT, Joystick System. Doc. No. 358765/E 10160 Operator Manual: cpos (OS), Dynamic Positioning System (Release 8.2) Doc. No. 385581/A 10176 Operator Manual: cpos (OS), Dynamic Positioning System. Doc. No. 322285/E 10186 Operator Manual: cpos (OS), Dynamic Positioning System. Doc. No. 358763/D 10219 Operator Manual: K-Master Release 2.0. Doc. No. 388345/A 10163 Operator Manual: K-Pos Autopilot Mode (Release 8.2) Doc. No. 385595/A 10086 Operator Manual: K-Pos Autopilot Mode. Doc. No. 322290/B 10137 Operator Manual: K-Pos Autopilot Mode. Doc. No. 358770/B 10244 Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System (Release 8.2). Doc. No. 385576/B 10253 Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System (Release 8.2.1). Doc. No.385576/C 10175 Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System. Doc. No. 322282/J 10158 Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System. Doc. No. 358761/D 10081 Product Description Kongsberg cjoy and cpos, Compact Joystick and DP Control Systems. Doc. No. 177332/F 10041 Product Description Kongsberg K-Pos DP, Dynamic Positioning System. Doc. No. 301093/B 10075 Release Notes for DP Basis 7.1.0. Doc. No. 179846/A 10139 Release Notes for DP Basis 8.1.0. Doc. No. 370173/A 10155 Release Notes for DP Basis 8.2.0. Doc. No. 388808/B 10220 Release Notes for K-Master Basis (2.0). Doc. No. 389266/A 10112 Report: SW test report, Conning View, SW 8.1.1 10103 Statement for JH19T14 MMD-MA1-SABA 10102 Survey Report: KM K-Pos HCS, SW 7.1.7 (DNV 344.1-000361-10102) 10029 Test Description: Functional test of DP Autopilot. Doc. No. 171557/H 10031 Test Description: I/O test of DP Autopilot. Doc. No. 174026/D 10243 Test Report: DELTA DANAK-1910979, Project no.: A506924-1 (COP-05 Input Panel) 10146 Test Report: DELTA DANAK-1911523, Project no.: A507567 (RCU 502) 10050 Test Report: DELTA DANAK-198195, Project no.: A503298-1, Rev.1 (COP-05) 10053 Test Report: DELTA DANAK-198307, Project no.: A503711 (DPC-3 cabinet) 10051 Test Report: DELTA DANAK-198508, Project no.: A503547-1 (RIO) 10052 Test Report: DELTA DANAK-198523, Project no.: A503547-3 (DIVA modem) 10055 Test Report: DELTA DANAK-198574, Project no.: A504273-2 (MP7600 on wire-isolators) 10043 Test Report: DELTA DANAK-198575, Project no.: A504273-3 (KM-05 DL, MP7600, wire-isolators) Form No.: MED.Ba Issue: April 2010 Page 5 of 7

APPENDIX REV. NO. 4 (PAGE 4 OF 5) Type Examination documentation continues 10044 Test Report: DELTA DANAK-198576, Project no.: A504327-1 (MP7600 on rubber isolators) 10045 Test Report: DELTA DANAK-198577, Project no.: A504327-2 (KM-05 DL, MP7600, rubber isolators) 10046 Test Report: DELTA DANAK-198632, Project no.: A503547-4 (CAN2DP) 10054 Test Report: DELTA DANAK-198637, Project no.: A504352-1 (IP22 KM-05) 10020 Test Report: DNV Report No. 2005-3115 Rev.01. Compass safe distance 10021 Test Report: DNV Report No. 2006-3293 Rev.01. Envir.Testing of Joystick Type KM-MOD 10022 Test Report: DNV Report No. 2006-3459 (IP22 test of COP-05 unit: Heading Wheel) 10023 Test Report: DNV Report No. 2006-3460 (IP22 test of COP-05 unit: Input Panel with Tracker Ball) 10104 Test Report: DNV Report No. 2010-1681 (JH19T14 MMD-MA1-SABA) 10105 Test Report: DNV Report No. 2010-3134 (JH19T14 MMD-MA1-AAAA) 10210 Test Report: DNV Report No. 2010-3409 Data Responce Norway, (MXE-5104 Maritime PC) 10208 Test Report: DNV Report No. 2011-3416 (HD13T21 KMD-DR1-CORP) 10030 Test Report: Functional, DP Autopilot. Doc. No. 171557/H FTR 10062 Test Report: HP Compaq dc7600 SFF PC, Mariner Systems Env. Test TL1005 Rev 1 10032 Test Report: I/O, DP Autopilot. Doc. No. 174026/D FTR 10057 Test Report: JH23T02 KMD-E3: DNV Confirmation of Tests (Vibration and Climatic Test) 10058 Test Report: Joystick KC 06, Environmental, Thales Doc. Ident. 9501 029 033XX 001 10238 Test Report: K-Master FWD Bridge Fallback Modes and Effects. Doc. No. 391976/B FTR 10100 Test Report: Kongsberg MP7900 PC, Mariner Systems Env. Test TL1306 10239 Test Report: K-Pos HCS with K-Master Chair/Workstation. Doc. No391978/_BFTR 10108 Test Report: Mariner Systems, Report no. TL1582-EMC, Kongsberg MP8200 10107 Test Report: Mariner Systems, Report no. TL1582-ENV Issue 01, Kongsberg MP8200 10110 Test Report: Mariner Systems, Report no. TL1583-EMC, Kongsberg MP8200 10109 Test Report: Mariner Systems, Report no. TL1583-ENV Issue 01, Kongsberg MP8200 10179 Test Report: MS Testing, TL13074-EMC, Kongsberg MP8300 PC3 10189 Test Report: MS Testing, TL13074-ENV, Kongsberg MP8300 PC3 10240 Test Report: MS Testing, TL13075-EMC, Kongsberg MP8300 PC4 10241 Test Report: MS Testing, TL13075-ENV, Kongsberg MP8300 PC4 10246 Test Report: MS Testing, TL13130-EMC, Kongsberg MP8300 PC5 10245 Test Report: MS Testing, TL13130-ENV, Kongsberg MP8300 PC5 10199 Test Report: MS Testing, TL1672-EMC Issue 3, HP A3600 series, dated 2014.06.26 10200 Test Report: MS Testing, TL1672-ENV Issue 3, HP A3600 series, dated 2014.06.26 10197 Test Report: MS Testing, TL1673-EMC Issue 3, HP A3600 series and Fibre transmitter, dated 2014.06.26 10198 Test Report: MS Testing, TL1673-ENV Issue 3, HP A3600 series and Fibre transmitter, dated 2014.06.26 10027 Test Report: NEMKO no. 69187 (IP22 test of COP-05 units: ALC, BU-NAV, Utility) 10028 Test Report: NEMKO no. E07224.00 (Order no. 80319), (EMC, cjoy-ot) 10078 Test Report: NEMKO no. E09662.02 (EMC and environmental tests for AT-FS716L Ethernet switch) 10211 Test Report: Nemko no. E11024.03 (K-Master Panel System) 10209 Test Report: Nemko no. E12059.00 (K-Master Bridge Chair) 10026 Test Report: NEMKO Order no. 41813 Rev 1.0 (Additional test cwing, cjoy, cpos) 10152 Test Report: TI 3000-14-015548 Rev.- (K-Master Pilot Chair). Doc. No. 391780/A 10154 Test Report: TI 3000-14-016067 Rev.- (KMX Pedestall 300). Doc. No. 391796/A 10153 Test Report: TI 3000-14-016343 Rev.- (KMX Medium-800 Console). Doc. No. 391795/A 10061 Test Report: TI 3010-05-0052 Rev. -, Test of KM-05 Operator Station - 650 10024 Test Report: TI 3010-05-0121 Rev. - (Additional test cwing, cjoy, cpos) 10025 Test Report: TI 3010-06-0407 Rev. -, Environmental, Re-Temperature Test of cjoy 10196 Test Report: TI 3010-09-0221 Rev.- (Vibration test of K-Master Chair) 10047 Test Report: TI 310-03-0319 Rev. A (FS120/NDU/NDU Mini) (Cabinet for cc-1) 10018 Test Report: TI 310-04-0125 Rev. A (cwing and cjoy) 10019 Test Report: TI 310-04-0270 Rev. - (cpos) 10073 Type Approval Hardware List, HW-Components. Doc. No. 1002734/L Form No.: MED.Ba Issue: April 2010 Page 6 of 7

APPENDIX REV. NO. 4 (PAGE 5 OF 5) Type Examination documentation continues 10195 Update Notes for DP Basis 7.1.14. Doc. No. 388807/A 10089 Update Notes for DP Basis 7.1.7. Doc. No. 351150/A 10142 Update Notes for DP Basis 8.1.1. Doc. No. 373965/A 10180 Update Notes for DP Basis 8.1.3. Doc. No. 388806/A 10248 Update Notes for DP Basis 8.2.1. Doc. No. 394443/A 10247 Update Notes for K-Master Basis 2.0.1. Doc. No. 394792/A Place and date HØVIK, 2014-07-04 Jan Tore Grimsrud Surveyor END OF CERTIFICATE Form No.: MED.Ba Issue: April 2010 Page 7 of 7