Features: The ESBE 24 volt electronic series of motor actuators are direct mounted actuators that rotate ESBE 3 & 4-way mixing/diverting valves for hydronic heating and cooling systems. The Series 60 of compact motors are designed for operating valves up to 2. The fixed 90 rotation provides consistent rotation of the actuator for the hydronic application. Features: ESBE control motor series are of a compact design. Direct mount actuators. Easy manual override of motor. Floating 3-point or proportional signal operation. An adjustable cam auxiliary contact switch. Wiring lead for ease of installation. Ordering Information: 60 Series Actuator: Used with ESBE rotary mixing valves up to 2 Code No. Series Signal Run Time (90 @60Hz) 082F8972 62E Floating 3 point 1.7 min. 082F8974 62EM Floating 3 point, with Aux. Switch 1.7 min. 082F8973 62P 0-10VDC, 2-10VDC 0-20mA or 4-20mA 60, 90 or 120 sec. Replacement Parts: Replacement Parts for 60 Series 1. Plastic Driver 2. Mounting Screw 3. Locking Screw 4. Label 5. Plastic Cap Code No. Description Item # 065B8929 Plastic drive sleeve 1 600-0000 Mounting kit for 60 Series 1-5 1
Applications: 4-Way mixing valve application 3-Way mixing valve application 3-Way diverting valve application 3 & 4-Way Rotary Valves 3-Way Valve 4-Way Valve Code No. Reference Connection Cv * Code No. Reference Connection Cv * 065B8970 3MG 15-2.5 1/2 NPT 2.9 065B8981 4MG 15-2.5 1/2 NPT 2.9 065B8971 3MG 20-4 3/4 NPT 4.7 065B8982 4MG 20-4 3/4 NPT 4.7 065B8950 3MG 20-6.3 3/4 NPT 7.3 065B8983 4MG 20-6.3 3/4 NPT 7.3 065B8972 3MG 25-8 1 NPT 9.3 065B8984 4MG 25-8 1 NPT 9.3 065B8968 3MG 25-12 1 NPT 14 065B8985 4MG 25-12 1 NPT 14 065B8969 3MG 32-18 1-1/4 NPT 21 065B8986 4MG 32-18 1-1/4 NPT 21 065B8953 3 G 40 1-1/2 NPT 35 065B8967 4MG 20-2.5 3/4 Solder 2.9 065B8954 3 G 50 2 NPT 50 065B8990 4MG 25-6.3 1 Solder 7.3 * Cv value based on flow per a 1 psi pressure drop through 065B8991 4MG 32-12 1-1/4 Solder 14 the valve 065B8979 4 G 40 1-1/2 NPT 35 065B8980 4 G 50 2 NPT 50 2
Technical Specifications: Supply Voltage Power Consumption Rotation (Factory set) 90 Torque Mountable Valve Size 24VAC 50/60 Hz, (62P: 24VAC/DC 50/60 Hz) 62E & 62EM 2VA (62P: 5VA) 45 in. lb (5 Nm) Enclosure NEMA 1, IP 41 Ambient Temp. Range Weight 1/2 to 2 ESBE rotary mixing valves 5 to 131 F (-15 to 55 C) 1 lb (0.4 kg) Signal / Run Time 3-point floating: 60 Hz Proportional: (selectable) 62P- Signal: 62E 1.7min. 0-10V, 2-10V, 0-20mA, 4-20mA 62EM 1.7min. Run TIme: 60, 90 or 120 sec. Auxiliary Switch 62EM: max. 2A, adjustable cam position Mounting: The actuator should be mounted with the ESBE rotary valve stem in either a horizontal position or pointing upwards. The actuator should not be installed in a downward orientation to reduce the possible contact of water with the actuator. Included with the actuator is the mounting hardware necessary to mount the electric motor actuator to an ESBE rotary mixing valve. 1. Plastic Driver 2. Mounting Screw 3. Locking Screw 4. Label 5. Plastic Cap Auxiliary Contact Cam: Within the 62EM there is a settable cam that determines when the auxiliary switch is engaged. Beneath the cover of the actuator is the settable cam for the auxiliary switch. Lift and position the cam within the rotation path. The maximum load for the auxiliary switch is 2amps. 3
Manual Operation: When placing the actuator in manual operation power should be turned off to the actuator. In the event the actuator is powered and is left in a manual position, the result could lead to the internal damage of the actuator. To place the 60 Series actuator in manual operation, push in the large knob. With the knob pushed in rotate it either clockwise or counter clockwise. To return back to automatic operation, rotate until the knob pops out. Electrical Wiring: 62E Motor 62EM Motor N L L 62M COM CCW CW Aux. Switch 1 2 3 4 5 62EM COM CCW CW AUX AUX 62P Motor, Signal Wire Signal 62P Motor, 2-Wire Signal 62P COM SGNL PWR VDCPA122 Danfoss 08/08 4
62P Proportional Actuator Settings: Internal DIP Switches (Factory settings in bold) Actuating time 1 2 Selection OFF OFF 60 sec ON OFF 90 sec OFF ON 120 sec Rotation direction 3 Direction OFF Clock wise ON Counter clock wise Control signal 4 5 Selection OFF OFF 0-10V OFF ON 2-10V ON OFF 0 20mA ON ON 4 20mA Dimensions: 1.65 (42 mm) 1.75 (44 mm) 0.45 (11 mm) 0.8 (20 mm) 1.45 (37 mm) 2.6 (65 mm) 3.25 (82 mm) Technical Specification: The electronic motor actuator shall be a compact design mountable on a rotary valve. The actuator shall be 24Vac powered with an ability for manual override. It shall have a clear indication of the actuator's position and be available as either a floating point or proportional style of actuator. VDCPA122 Danfoss 08/08 5
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice. All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. Danfoss Inc. 6711 Mississauga Road, Suite 410 Mississauga, ON, L5N 2W3 Tel.: 905-285-2050, Fax: 905-285-2055 www.na.heating.danfoss.com Danfoss Inc. Baltimore, MD Tel.: 443-512-0266, Fax: 443-512-0270 www.na.heating.danfoss.com