AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices
Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked Receptacles and Non-Metallic AM-Tite series plugs allow you to maintain existing plant standards, while benefiting from new and innovative designs and materials. AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles MENNEKES MSR Series Switched and Interlocked Receptacles incorporate an interlocking receptacle and disconnect switch in one non-metallic NEMA 4X; 12 enclosure. Units are available both fusible and non-fusible to meet your application requirements. The patented interlock mechanism prohibits the switch from being turned ON unless the plug is fully inserted. The plug cannot be removed unless the unit is turned OFF. The MSR Series Receptacles conform to UL Standard 1686 C1 configurations assuring interchangeability with other manufacturers. Units meet OSHA requirements for lockout/tagout (Reg. 1910.147) and prevent arc-flash. MENNEKES Interlocked Receptacles operate in harsh environments and facilitate operator safety when providing power to welders, pumps, break-out packaging equipment and various other uses. Applications: Wet, damp or hose down environments Welding Applications Portable Pumps and Lift Stations Transformer Carts Food and Beverage Manufacturing Paper and Pulp Industry Automotive Plants Shipyards Cement and Steel Plants MSR Interlock mated with traditional metal plug AM-Tite Plug mated to metal devices; compatible with other manufacturers with Style 2 grounding MSR Series Interlocks are used with traditional metal plugs, or with the new and innovative MENNEKES AM-Tite Series plugs. These next generation UL 1686 configured plugs are easier to install and are compatible with mating devices from other manufacturers. With AM-tite plugs, you can maintain existing plant standards while promoting operator safety inherent with non-metallic devices. NEMA 4X AM-Tite Non-Metallic Plugs available in 30A & 60A
MSR Series Switched and Interlocked Receptacles 30 Amp and 60 Amp, Fusible and Non-Fusible Corner mounting tubes minimize mounting footprint. Moveable mounting feet also provided. Generous wiring space allows for convenient access to field terminals. DIN rail and screw mounting of components allow for ease of maintenance. Factory wired switch to receptacle, available fusible or non-fusible. (fusible version shown) High visibility, pad-lockable handle actuates switch and receptacle interlock mechanism to assure no-load make and break of plug connected equipment. Thermoset receptacle to UL 1686 C1 configurations; UL Classified for combination use with competing brand plugs. Compliance and Ratings Fusible Interlocked Receptacles Compliance: Standards 98; 1682 & 1686 to CSA Standard C22.2 No. 4-M89, Enclosed Switches Environmental: Type 4X, 12; IP 66 Suitable Construction: Enclosure: Valox with Nylon Handle Hardware: Stainless Steel and Ni plated Brass Insulator: Thermoset Polyester Contacts: Brass with Beryllium Copper Spring Gaskets: Fermapor Polyurethane & NBR Receptacle Cover: Cu free Aluminum with Epoxy Powder Coat Ratings: Receptacles: 30A & 60A, 600Vac in 3Wire 4Pole Grounding: Style 2 Switch: Fusible w/type J Fuse Clips, 600Vac Capable Short Circuit: 100kAIC w/fuses 3Ø HP Rating: 10 to 50HP Max Ratings Fusible version only Removable fuse holders allow for fuse replacement away from circuit. Risk of touching live parts is minimized versus traditional knife style switches. (fuses not provided). NEMA 4X Valox enclosure; impact modified and chemical resistant. Features poured-in-place gasketing and molded conduit drill points in top/bottom/rear walls. Threaded stainless steel ring provides NEMA 4X rating with locking plugs; UL tested. Dust tight and watertight rated cover; field replaceable. Non-Fusible Interlocked Receptacles Compliance: Standards 508; 1682 & 1686 to CSA Standard C22.2 No. 14-M95 Environmental: Type 4X, 12; IP 66 Suitable Construction: Enclosure: Hardware: Insulator: Contacts: Gaskets: Receptacle Cover: Valox with Nylon Handle Stainless Steel and Ni plated Brass Thermoset Polyester Brass with Beryllium Copper Spring Fermapor Polyurethane & NBR Cu free Aluminum with Epoxy Powder Coat Ratings: Receptacles: 30A & 60A, 600Vac in 3Wire 4Pole Grounding: Style 2 Switch: Heavy Duty, 600Vac Capable Short Circuit: 65kA RMS Symmetrical when protected by equally-sized Class J Fuse 3Ph HP Rating: 5 to 50HP * Valox is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Hidden hinge system eliminates sanitation concerns; provides access to interior for fuse replacement, if applicable. 7 Width mounts in web of standard I-beam. Compact design is ideally suited to retrofits when compared to current industry alternatives.
AM-Tite Non-Metallic Plugs; 30 Amp and 60 Amp Coarse Rugged Threading Facilitates quick assembly Ordering Information Amps Type Poles/ Voltage MSR Interlocks Mating Plug Mating Plug Wires Catalog Numbers Catalog Numbers Catalog Numbers (non-metallic) (metallic) 30A Fusible 3W 4P 600VAC MSR430MIFS2W ME3034NM ME3034BC 30A Non-Fusible 3W 4P 600VAC MSR430MIS2W ME3034NM ME3034BC 60A Fusible 3W 4P 600VAC MSR460MIFS2W ME6034NM ME6034BC 60A Non-Fusible 3W 4P 600VAC MSR460MIS2W ME6034NM ME6034BC Strain Relief Assembly Accommodates wide cable range which easily threads into NPT housing Specifications UL Standards: 1682; 1686; 50E- TYPE 4X;12 Configuration: Housing Material: Hardware: Outdoor Use: 30A & 60A 3W 4P Style 2 Ground (C1) Impact Modified PBT Polyester Also available in traditional metal version Stainless Steel or Ni Plated UV Stabilized Housing and Gasket Materials Rugged Housing Offers outstanding insulation for user safety. Innovative design and engineered materials provide a durable alternative to traditional metal products. Ready to Wire Terminals Provided with backed out terminal screws and large wire chamber to speed installation Oversized Terminal Screws Preferred by installers Molded Gaskets Permanently molded to the housing for watertight seal. Unique design assures gaskets will never be lost or misaligned. Sure-grip Rubberized Locking Ring Provides high impact protection and NEMA 4X Rating MSR Replacement Parts Description Fusible Non-Fusible 30A Replacement Switch ME30XFDSJ ME30MIX 60A Replacement Switch ME60XFDSJ ME60MIX 30A Cover Assembly ME3430MIFRC2W ME3430MIRC2W 60A Cover Assembly ME3460MIFRC2W ME3460MIRC2W 30A Chain Cover for Receptacle MEPTTC30 MEPTTC30 60A Chain Cover for Receptacle MEPTTC60 MEPTTC60 30A Threaded Cover Ring ME3430MI2SSR ME3430MI2SSR 60A Threaded Cover Ring ME3460MI2SSR ME3460MI2SSR MSR Optional Auxiliary Contacts Amps Fusible Non-Fusible Catalog Number Catalog Number 30A ME30FDAUX ME30AUX 1 N/O or 1 N/C 1 N/O and 1 N/C 60A ME60FDAUX-0 ME80AUX 1 N/O 1 N/O and 1 N/C 60A ME60FDAUX-C N/A 1 N/C Dimensions & Ratings; 30 Amp and 60 Amp MSR Interlocks 30A Contact Carrier - 3W 4P MEARI3034 MEARI3034 60A Contact Carrier - 3W 4P MEARI6034 MEARI6034 MSR Performance Electrical Mechanical Environmental Max HP Ratings Amp Type Single Phase (Volts) Three Phase (Volts) 120 240 208 240 480 600 30 Fusible 2 3 7.5 7.5 15 20 30 Non-Fusible 2 5 10 10 20 20 60 Fusible 7.5 15 15 30 50 60 Non-Fusible 3 10 20 20 40 50 Approximate Dimensions (in inches) A B C D E F G H 30A 11.50 7.00 6.34 13.00.20 7.23 8.45 13.46 60A 11.50 7.00 6.34 13.00.20 7.23 8.93 14.45 Visit www.mennekes.com for spec sheets and mechanical drawings. Dielectric Voltage Withstands 3,000 VAC Min. Max. Working Voltage 250VDC/600VAC Max. Short Circuit Rating Fusible MSR; 100,000 RMS Symmetrical Amperes w/fuses Non-Fusible MSR; 65,000 RMS Symmetrical Amperes Operations (min) Fusible; 6,000 Electrical 20,000 Mechanical Non-Fusible; 10,000 Electrical 100,000 Mechanical Fuse Type(s) 30A & 60A Type J Fuse Type(s) - not provided 30A & 60A Type J 30A - Type CC Option Available Impact Resistance Per UL 746C Terminal Identification Per UL/CSA and Accepted International Conventions Product Ratings Identification & General Rating on External Label HP Ratings per Operating Voltages on Internal Label Mounting Moveable Mounting Feet or Use of Corner Mounting Tubes Moisture Resistance Type 4X (Watertight, Washdown) per UL 50E Type 12K (Dusttight, Falling Dirt) per UL 50E International Rating IP66 Suitability, per IEC 60529 Flammability UL94-5V0 and V0 Classification Operating Temperatures Max. Continuous: +60 C Min. Continuous: -40 C without impact UV Resistance Enclosure & Handle Materials are UV Stabilized
Mennekes electrical Products 277 Fairfield Road Fairfield, NJ 07004 Tel: (800) 882-7584 Fax: (973) 882-5585 Email: info@mennekes.com Internet: www.mennekes.com www.mennekes.com 2016 MENNEKES Electronics, Inc. ME 3108 8/2016