Compact Cylinder With Solenoid Valve

Compact Cylinder With Solenoid Valve Series ø, ø, ø, ø Valve and compact cylinder integrated for compactness Solenoid valve abor saving No need to select size of valve ess piping work Compact cylinder Energy saving ir consumption between the valve and cylinder reduced by approximately %. Space saving Small mounting space with valve integrated structure CVJ CV CV3 CVS1 VGQ Piping is possible with a single tube. Restrictor with silencer (ounting example) 2 D- -X

Easy ounting Height Comparison (Dimensional difference: C) CQ2 C 3 4. 1 4 C. 13 Through-hole mounting ounting Example Possible to set wiring and piping entries in the same direction. Tap mounting Selectable Piping Direction Side piping ow ir Consumption pprox. % reduction in air consumption by reducing the piping between the valve and cylinder Cylinder bore size: ø mm Piping: I.D. ø4 mm ength 2 m Cylinder stroke: 30 mm xial piping Variation Standard stroke 1 2 30 3 4 0 2

F G D 30 W ounting Through-hole, oth ends tapped (Standard) Foot Rod flange Head flange Double clevis ounting brackets are included, (but not assembled). mm mm mm mm Cylinder stroke Please refer to page 2 for Standard Stroke and Intermediate Stroke. Nil F Compact Cylinder With Solenoid Valve Series ø, ø, ø, ø ody option Standard (Rod end female thread) With boss in head end How to Order The combination of body options is available. Example) F uto switch Nil Without auto switch (uilt-in magnet) For applicable auto switch models, refer to the below table. Number of auto switches Nil 2 pcs. S 1 pc. N n pcs. Rated voltage 24 VDC VDC anual override Nil Port thread type ø x 0. Nil ø Rc ø F G ø N NPT Piping Nil P Standard xial Standard piping xial piping Surge voltage suppressor Nil Without surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor R With surge voltage suppressor (Non-polar type) U With light/surge voltage suppressor (Non-polar type) Electrical entry -type plug connector with lead wire (300 mm) Non-locking push type ocking slotted type O -type plug connector without connector For lead wire lengths other than 300 mm, refer to the plug connector lead wire (page 31). CVJ CV CV3 CVS1 VGQ pplicable uto Switches / Refer to pages 41 to for detailed auto switch specifications. oad voltage uto switch model ead wire length(m) Special Electrical Wiring Type Electrical entry 0. 1 3 function entry (Output) DC C Perpendicular In-line (Nil) () () (Z) Solid state auto switch Reed auto switch Diagnostic indication 2-color indicator Water resistant 2-color indicator Grommet Grommet Indicator light 3-wire (NPN) 3-wire (PNP) V, V 2-wire V 3-wire (NPN) V, V Yes 3-wire (PNP) 24 V 2-wire V 3-wire (NPN) 3-wire (PNP) V, V 2-wire V 3-wire (NPN equivalent) V Yes V 2-wire 24 V V, V 1 Water resistant type auto switches can be mounted on the above models, but in such case SC cannot guarantee water resistance.consult with SC regarding water resistant types with the above model numbers. 2 1 m type lead wire is only applicable to D-3. ead wire length symbols: 0. m Nil (Example) NW 1 m NW 3 m NW m Z NWZ 0 V 0 V or less NV PV V NWV PWV WV NV 1 PV 1 V 1 V 3V 2 0V N P NW PW W N 1 P 1 1 3 0 Pre-wired connector pplicable load IC circuit IC circuit Relay, PC IC circuit IC circuit IC circuit Relay, PC Solid state auto switches marked with are produced upon receipt of order. For details about auto switches with pre-wired connector, refer to pages and 1. uto switches are shipped together (not assembled). 2 D- -X

Series Cylinder Specifications Do not separate the cylinder from the valve. Symbol With valve (Rubber bumper) ction Fluid Proof pressure aximum operating pressure inimum operating pressure mbient and fluid temperature Stroke tolerance ounting method Piston speed Cushion Double acting, single rod ir (Non-lube) 1.0 Pa 0. Pa 0.1 Pa to C (No freezing) 0 to +1.0 mm Through-hole / oth ends tapped to 0 mm/s Rubber bumper Stroke length tolerance does not include variations in the bumper value. Valve Specifications Type of actuation 2 position single anual override Non-locking push type / ocking slotted type Pilot exhaust ain/pilot valve common exhaust type ounting orientation Unrestricted (based on cylinder mounting orientation) Enclosure Dustproof Solenoid Specifications Theoretical Output OUT Operating Operating pressure (Pa) direction 0.3 0. 0. IN OUT IN OUT IN OUT IN OUT 11 241 31 3 4 3 302 2 2 2 2 2 10 4 3 0 11 130 10 2 ounting racket Part No. Foot Note) -0-0 CQ-0-0 Flange -F0 -F0 CQ-F0 -F0 -D0 -D0 -D0 -D0 Note) Order two foot brackets per cylinder. Parts belonging to each bracket are as follows. Foot, Flange: ody mounting screws Double clevis: Clevis pin, C-type retaining ring for shaft, ody mounting screws ccessory bracket IN Unit: N Double clevis For details about the single knuckle joint, double knuckle joint, knuckle pin, rod end nut, and simple joint, refer to page 3. 2 Electrical entry Coil rated voltage llowable voltage fluctuation Note) Power consumption Surge voltage suppressor 1 2 Description Stroke range pplicable example DC DC Standard stroke,, 1,, 2, 30, 3,, 4,,, 0,, 1,, 2, 30, 3,, 4,,, 0, 1,, 2, 30, 3,, 4,,, 0, 1,, 2, 30, 3,, 4,,, 0 Refer to How to Order for standard model numbers (previous page). Intermediate strokes are available by using spacers with standard stroke cylinders.,,,, -type plug connector 24/ (V) ±% of the rated voltage 0.3 (With light: 0.4) W Diode (Non-polar type: Varistor) Indicator light ED Note) The S and Z types of surge voltage suppressor have an internal circuit allowing voltage drop, so use within the following allowable voltage fluctuation range. S, Z type 24 VDC: % to +% VDC: 4% to +% Standard Stroke 1 The outline dimensions for mm stroke will be the same as those for mm stroke. 2 The outline dimensions for mm stroke will be the same as those for 1 mm stroke. Intermediate Stroke Description Compatible with strokes of 1 mm increments. Compatible with strokes of mm increments. Stroke range 1 to to : -- spacer of mm is installed in standard cylinder -0-. dimension is 133 mm.

Compact Cylinder With Solenoid Valve Series Weight Weights 2 3 2 31 3 1 3 41 21 0 3 443 0 4 2 34 4 00 0 30 3 4 3 Stroke 3 3 21 4 4 4 1 111 4 442 3 11 44 00 Unit (g) 0 2 3 11 132 11 121 Calculation: (Example) - asic weight: - 3 g dditional weight: 43 g 3 g dditional Weight xial piping Connector (300 mm) ale thread Nut With boss in head end Foot (including mounting bolt) Rod flange (including mounting bolt) Head flange (including mounting bolt) Double clevis (including pin, retaining ring, bolt) 3 2 1 1 1 3 2 1 10 21 3 1 4 3 3 13 243 33 34 3 Unit (g) 4 3 3 2 334 44 4 CVJ CV CV3 ounting olt for CVS1 VGQ ounting: e sure to use it as through-hole when mounting. ounting bolt Refer to the following for ordering procedures. Order the actual number of bolts that will be used. Example) CQ- x 4: 4 pcs. D C Cylinder model C D ounting bolt size - 4 CQ- x 4 - - 1 - - 2 4 0 x 4 x x x 0-30 x - 3 0 x 0 - - 4 - - -0 0 1 13 x x 0 x x 1 x 13-4 CQ- x 4 - - 1 - - 2 0 x x x 0 x - 30 0 x 0. - 3 x - - 4 - - -0 0 0 11 1 x 0 x x 0 x 11 x 1 Cylinder model C D ounting bolt size - - 1 - - 2-30 - 3 - - 4 - - -0 - - 1 - - 2-30 - 3 - - 4 - - -0.. 0 0 0 0 0 0 0 0 0 0 0 1 CQ- x 0 x 0 x x 0 x x 0 x x 0 x x 0 x CQ- x 0 x x 0 x x 0 x x 0 x x 0 x x 1 2 D- -X

Series llowable Kinetic Energy Rod End llowable ateral oad ateral load 000 Operating pressure: 0. Pa 0 Stroke Eccentric distance oad mass (N) 00 0 ø ø ø ø Rod end allowable lateral load (N) ø ø ø ø 1 0 00 1 0 0 0 0 ax. speed (mm/s) Relationship between Number of Needle Rotations and Piston Speed ø, ø ø, ø 00 00 ø 00 ø 00 Stroke + Eccentric distance The allowable lateral load applied to the rod end is as shown above. Do not use exceeding the value shown by the graph. ø Piston speed (mm/s) 00 0 0 300 ø ø Piston speed (mm/s) 00 0 0 300 ø ø ø 0 0 0 0 1 0 1 2 3 4 Without Fully restrictor opened Number of restrictor s needle rotations Restrictor: SN2- Pressure: 0. Pa ounting orientation: Horizontal, with no load, piston extended The above piston speed is for reference purpose only. 0 0 1 2 3 4 Without Fully restrictor opened Number of restrictor s needle rotations Restrictor: SN2-01 Pressure: 0. Pa ounting orientation: Horizontal, with no load, piston extended The above piston speed is for reference purpose only. <Exhaust restrictor with silencer > 30 pplicable bore size,, odel SN2- SN2-01 Port size x 0. 1/ Effective area (mm 2 ) 1. 3. Weight (g) 1

Compact Cylinder With Solenoid Valve Series Construction e r t!0!4!2 u!3 o!1 w i q With boss in head end! y Component Parts No. Description aterial Note 1 2 3 Cylinder tube Piston Piston rod luminum alloy luminum alloy Carbon steel Hard anodized Hard chrome plated 4 Collar luminum alloy casting ø, ø, chromate coating luminum alloy nodized 11 13 1 1 Retaining ring ushing umper umper agnet Rod seal Piston seal Gasket Solenoid valve Pilot valve oss ring Rod end nut Carbon tool steel earing alloy Urethane Urethane NR NR NR luminum alloy Carbon steel Phosphate coated ø, ø Hard anodized Nickel plated Replacement parts: Seal Kit asic Type Order no. CQ2-PS CQ2-PS CQ2-PS CQ2-PS Contents Set of nos. above!0!1!2 Seal kit includes!0,!1,!2. Order the seal kit, based on each bore size. Grease pack must be ordered separately as it is not included in the seal kit. Grease part no.: GR-S-0 ( g) ø, ø! anual button ength of plug connector lead wire The standard length of the plug connector with a lead wire is 300 mm, but other lengths are available as follows. CVJ CV CV3 CVS1 VGQ How to Order Pilot Valve ssembly How to Order Connector ssembly V111 Rated voltage 24 VDC VDC anual override Nil Non-locking push type ocking slotted type Surge voltage suppressor Nil Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor R With surge voltage suppressor (Non-polar type) U With light/surge voltage suppressor (Non-polar type) Electrical entry -type plug connector with lead wire (ead wire length 300 mm) O -type plug connector without connector With lead wire: SY0 30 4 Nil 1 ead wire length 300 mm 00 mm 00 mm 2 mm 00 mm 30 3000 mm mm 00 mm How to Order Indicate the part number of the connector assembly in addition to the part number of the solenoid valve without the connector for the plug connector. Example) ead wire length 00 mm When ordering cylinder with valve -30--OZ SY0-30-4-31 D- -X

S S Q Series Dimensions: ø, ø, ø, ø asic: 2 x P2 EXH F P1 SUP anual button W H thread effective depth C 2 x 4 x O effective length R V xial piping K E J Y 2 x 4 x øo counterbore depth R ød 4 x øn through + Stroke + Stroke With boss in head end F1 F1 30 34. 43. 1 øth 2 Th 21 2 3 3 0 0.02 0 0.02 0 0.02 0 0.02 Width across flats 1 H1 C1 X 1 2 2 C1.. 2 2 H1 11 11 2. 2. 33. 33. x 1. x 1. 1 x 1. 1 x 1. X 23. 23. 2. 2. Stroke range Note 1) Note 1) to 0 33 to 0 4. 3. to 0 4.. to 0 4 4 C 13 13 1 1 D 1 1 E 4 2 4 F.... H x 1.2 x 1.2 x 1. x 1. J. 2 3. K 1 1 34 0 N.4.4. O x 1 x 1 x 1.2 x 1. O P1 x 0. x 0. P2 x 0. x 0. 11 Rc, G, NPT1/ Rc, G, NPT1/ Rc, G, NPT1/ Rc, G, NPT1/ Q 2. 2. 3. 3. Stroke range R R S V W Y to 0 to 0 to 0 to 0 1. 1 1 43 43 4 4 43. 43. 3 Note 1) The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for mm stroke. The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for 1 mm stroke.

Compact Cylinder With Solenoid Valve Series Dimensions: ø, ø, ø, ø Foot: + Stroke Y Special cap bolt X Z Stroke range H 4 x ød S.2 Note 1) to 0 33 1 Note 1) 1 to 0. 3. 23. 1 to 0.. 1. 1 to 0 2.2 4 1 3. 3. 43. 43. X D.. 11 Y T + Stroke G 4 4 H Rod flange: F FV Y T X X 30 33 3 4 3.2 3.2 3.2 3.2 4 G S + Stroke Y Z X Rod end nut Note 1) The dimensions ( + stroke), ( + stroke) and (S + stroke) for mm stroke will be the same as those for mm stroke. The dimensions ( + stroke), ( + stroke) and (S + stroke) for mm stroke will be the same as those for 1 mm stroke. Y. 4 0 4. 1 113 11.2 11.2. 1.2. Foot bracket material: Carbon steel Surface treatment: Nickel plated CVJ CV CV3 CVS1 VGQ FX FZ 4 x øfd FT + Stroke + Stroke Rod end nut Stroke range FD Note 1) Note 1) to 0 33. to 0. 3.. to 0... to 0 4 4 FT FV 4 4 0 FX 2 2 FZ 1 2 1 1 1 3. 3. 43. 43. 34 Flange bracket material: Carbon steel 0 Surface treatment: Nickel plated Note 1) The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for mm stroke. The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for 1 mm stroke. 33 D- -X

Series Dimensions: ø, ø, ø, ø Head flange: G FV Rod end nut + Stroke + Stroke FT FX FZ 4 x øfd Stroke range FD 4 Note 1) to 0 33 Note 1). to 0 4. 3.. to 0... to 0 4 FT FV 4 4 0 FX 2 2 FZ 2 2. 2. 33. 33. 34 0 Flange bracket material: Carbon steel Surface treatment: Nickel plated Note 1) The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for mm stroke. The dimensions ( + stroke) and ( + stroke) for mm stroke will be the same as those for 1 mm stroke. Double clevis: D CT 4 x N Cap bolt øcd hole H Shaft d + Stroke C + Stroke CU CW RR CX +0.4 +0.2 CZ 0.1 0.3 Rod end nut + Stroke Stroke range C 0 Note 1) to 0 33 Note 1) 0 to 0. 3.. to 0 0... to 0 4 4 CD CT CU CW CX CZ 2 30 1 1 3 3 44 44 2. 2. 33. 33. N x 1 x 1 x 1.2 x 1. Note 1) The dimensions ( + stroke), ( + stroke) and (C + stroke) for mm stroke will be the same as those for mm stroke. The dimensions ( + stroke), ( + stroke) and (C + stroke) for mm stroke will be the same as those for 1 mm stroke. RR Double clevis bracket material: Cast iron Surface treatment: Coated 34

Compact Cylinder With Solenoid Valve Series ccessory racket Single knuckle joint ø Double knuckle joint ønd hole H Shaft d I-G04 I-G0 IY-G04 IY-G0 pplicable bore size,, 42 pplicable bore size,, 1 1 E1 ø ø2 Dd 0.0 0.0 0.0 0.03 30 41.. x 1. 1 x 1. d. 13.4 ø 3.2 44.2 R R1 1 ø m 1. 2.0 U1 aterial: Cast iron t 1.1 1.1 NDH NX +0.0 0 1 0.3 0. +0.00 0 0.3 0. Knuckle pin (Common with double clevis pin) Retaining ring C-type for shaft C-type for shaft Simple Joint / ø to ø Joint and mounting bracket (/-type) part no. Y 03 ounting bracket Y -type mounting bracket Y -type mounting bracket YU Joint pplicable air cylinder bore size 03 For ø, ø 0 For ø, ø aterial: Carbon steel llowable Eccentricity ø ø ø ø Eccentricity tolerance ±1 acklash 0. <Ordering> Joints are not included with the - or -type mounting brackets. Order them separately. (Example) for ø Order number -type mounting bracket part number Y-03 Joint YU-03 Joint and mounting bracket (/-type) part no. pplicable mounting bracket Joint part no. -type mounting bracket -type mounting bracket, YU-03 Y-03 Y-03, YU-0 Y-0 Y-0 aterial: Cast iron pplicable pplicable bore size 1 E1 R R1 U1 NDH NX NZ pin part no. Y-G04, 42 1 ø 30 x 1. +0.0 0 1 3 41. IY-G04 +0. +0.3 Y-G0, ø2 1 x 1. 1 +0.00 0 +0. +0.3 44. IY-G0 Knuckle pin and retaining ring are included. Rod end nut d NT-04 NT-0 Y-03 Y-0 Y-03 Y-0 V U T2 pplicable bore size,, -type mounting bracket F,,,, T1 1 U T2 V -type mounting bracket H D. V 1 d x 1. 1 x 1. E 1 E F RS H 11 2 x ød 42 W Weight (g) 0 W W C aterial: Carbon steel T1.. 2 C 2.4 31.2 aterial: Chromium molybdenum steel (Nickel plated) T2 CVJ CV CV3 CVS1 VGQ YU-03 YU-0 ød1 K (Width across flats ø) UT aterial: Chromium molybdenum steel U C (Nickel plated) pplicable Weight U C d1 d2 H K UT bore size (g),, 0 H (With locking) ød2 1 11 1. x 1.2 1 13 1. 1 x 1. 2 Y-03 Y-0 Y-03 Y-0,,,, T1 2 x ød through 2 x øo counterbore T1.. D E 2 T2 J E J 11 34 42 V 1 aterial: Carbon steel (Nickel plated) øo 11. depth.. depth. W RS Weight (g) 0 0 11 0 3 D- -X

Series uto Switch ounting uto Switch Proper ounting Position (Detection at Stroke End) and Its ounting Height ø, ø, ø, ø D- type/d-w type/d- type/d- type D-V type/d-wv type/d-v type/d-v type W pprox. Hs D- D-W D-V, D-WV D-V W Hs [1] 1 <1> 1. 11.. 1. 1 1. 4.. [1] 1 <1> 1. 11.. 1. 2. 3. 42 uto Switch ountable Surface, ounting Groove Number (Direct ounting) Operating Range uto switch model D-, D-V D-W, D-WV D-, D-V D-, D-V. inimum Stroke for uto Switch ounting.. D- W [1] 1 <1> 1. 11.. 1. 3 0. 2.. The value in parentheses [ ] is for mm stroke with ø. The value in parentheses < > is for mm stroke with ø. ( ): Denotes the values for D-3. The negative indication in the table for W shows the mounting inside the cylinder body. For the actual setting, check the operating condition of the auto switch and adjust.. 11. Since this is a guideline including hysteresis, not meant to be guaranteed. (ssuming approximately ±30% dispersion.) There may be the case it will vary substantially depending on an ambient environment. [13] <1>. D-.. 13. uto Switch ounting W 3 ( 0.). ( 3). ( ) 11. ( ) [13] <1>. D-V The below table shows which surfaces of the cylinder an auto switch can be mounted on, and the number of slots for the direct mounting type auto switch. Port aperture Switch model D-(V), W(V), (V), (V) C D (ounting (ounting (ounting (ounting groove number) groove number) groove number) groove number) D C Diagram seen from the piston rod No. of auto switch D-W D-WV D- D-V mounted D- D-V D- D-V 1, With 1 pc. () 1 () () 2, With 2 pcs. () 1 1 1 The outline dimensions for mm stroke will be the same as those for mm stroke. 2 The outline dimensions for mm stroke will be the same as those for 1 mm stroke. 3 ( ): ountable minimum stroke when the auto switch protrudes from the cylinder body end face and does not interfere with the space for the lead wire. (The figure on the right) Order separately for auto switches. 3.. 13. Refer to page 2. Hs 2 30. 3.

Series Specific Product Precautions 1 e sure to read this before handling the products. Refer to back page for Safety Instructions, pages 3 to for ctuator and uto Switch Precautions, and 3/4/ Port Solenoid Valve Precautions in est Pneumatics No. 1-1. Warning anual Override Connected actuator is started by manual operation. Use the manual override after confirming that there is no danger. Non-locking push type [Standard] Press in the direction of the arrow ocking slotted type [ type] Turn 0 in the direction of arrow. When operating with a screwdriver, turn it gently using a watchmaker s screwdriver. (Torque: ess than 0.1 N m) How to Use Plug Connector 1. ttaching and detaching connectors To attach a connector, hold the lever and connector unit between your fingers and insert straight onto the pins of the solenoid valve and remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. To detach a connector, remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. Cover Groove Pin ever DC polarity display Socket DXT-1-1 Connector ead wire 2. Crimping of lead wires and sockets Not necessary if ordering the lead wire pre-connected model. Strip 3.2 to 3. mm at the end of the lead wires, insert the ends of the core wires evenly into the sockets, and then crimp with a crimping tool. When this is done, take care that the coverings of the lead wires do not enter the core wire crimping area. For crimping, use a specific tool. (For special crimping tool, please contact SC.) Core wire crimping area Socket Hook - + Hook Crimping area 0.2 to 0.33 mm 2 Core wire ax. cover diameter: ø1. mm ead wire Insulation How to Use Plug Connector 2. ttaching and detaching sockets with lead wires ttaching Insert the sockets into the square holes of the connector (, indication), and continue to push the sockets all the way in until they lock by hooking into the seats in the connector. (When they are pushed in, their hooks open and they are locked automatically.) Then confirm that they are locked by pulling lightly on the lead wires. Detaching To detach a socket from a connector, pull out the lead wire while pressing the socket s hook with a stick having a thin tip (approx. 1 mm). If the socket will be used again, first spread the hook outward. Socket Hook Connector ead wire 4. Do not apply bending force or tensile force repeatedly to the lead wire. This can cause disconnection of the connector and breakage of the lead wire. If this is unavoidable due to the application, keep the bending radius of the lead wire R mm at least. Surge Voltage Suppressor Standard (with polarity) With surge voltage suppressor (S) Diode to prevent reverse current CO (+) Coil [SO.a] ( ) With light/surge voltage suppressor (Z) Diode to prevent reverse current CO (+) ED Coil [SO.a] ( ) Non-polar type With surge voltage suppressor (R) CO (+, ) Varistor Coil SO.a (,+) With light/surge voltage suppressor (U) CO (+, ) Varistor Coil SO.a (,+) ED For standard type, connect so that polarity is matched to the connector s (+), ( ). (For non-polar type, the lead wires can be connected to either one.) Solenoids, whose lead wires have been pre-wired: positive side red and negative side black. 3 CVJ CV CV3 CVS1 VGQ D- -X

Series Specific Product Precautions 2 e sure to read this before handling the products. Refer to back page for Safety Instructions, pages 3 to for ctuator and uto Switch Precautions, and 3/4/ Port Solenoid Valve Precautions in est Pneumatics No. 1-1. Retaining Ring Installation/Removal 1. To remove and install the retaining ring, use an appropriate pair of pliers (tool for installing C-type retaining ring). 2. Even if a proper plier (tool for installing C-type retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing C-type retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment. Other 1. Do not separate the cylinder from the valve. ounting/removal 1. Do not remove the plug from the cylinder tube end surface. If the plug is removed with compressed air supplied to the cylinder, the air blowing out may inflict damage to a human body or peripheral equipment. 3