DENT PULLING SPOT WELDING MIG WELDING BRAZING RIVETING Valid until 31/12/16 Bodyshop @GYSLtd SPOT WELDING meets Manufacturer & Insurer Standards FROM 7499 EX VAT MIG WELDING /BRAZING FROM 1249 EX VAT EQUIPMENT DENT PULLING SYSTEMS FROM 549 EX VAT GYSPRESS 8T ref: 053861 8 tonnes Quick arm change design Arm rotates 360 degrees Reference: 053861 2802.00 GYS - WHY SETTLE FOR LESS?
STEEL DENT PULLING POPLINER DENT PULLING SYSTEM ref: U55353 Dent pulling and straightening Welding of stars and washers for panel pulling Wavy wire welding, ideal for curved surfaces Contact shrinking, to work on light impacts and for the highest quality finish Able to use a graphite pencil Gyspot 2700 2600A/13A Spot Inertia Hammer Automatic Spot Accessories Trolley Reference: U35044/U35043 2799.00 2884.32 Reference: U55353 549.00 EASYLINER 39.02 Single Phase ref: U53018 The complete solution for dent pulling essential for repairing small, medium and large dents in sills, wings, doors and bonnets. Remove dents without disassembling Repair without replacing Reduce down-time Gyspot 39.02 Trolley Levelling Bar Auto gun with slide hammer Dent Box 3 Phase versions also available 638.41 Reference: U53018 1199.00 SPEEDLINER PRO 230 Steel Dent Pulling Workstation Single Phase/3 Phase ref: U35044/U35043 Complete Dent Pulling Workstation for Steel Body Panels Automatic welding and multi tool operations Easy operation with microprocessor control panel Steel panel shrinking capabilities, slide hammer, stud welding and wavy wire welding Triggered gun option for precision welding 2m earth cable and 8m power cable EASYLINER PLUS ref: U53618 As per Easyliner 39.02 with manuliner and upgraded levelling bar included. Trolley Gyspot 39.02 Levelling Bar Manuliner Dent Box 3 Phase versions also available Reference: U53618 1599.00 1375.42 1769.49 2 GYS - WHY SETTLE FOR LESS?
ALUMINIUM & STEEL DENT PULLING PROLINER ALU PRO E.FV Aluminium Dent Pulling Workstation ref: U35065 ALUMINIUM Dent pulling workstation for Aluminium Body Panels Automatic power optimisation Max welding current of 7500A Microprocessor control for easy operation Digital display and adjustment Pre-set parameters Earth attachment for gun Gyspot Alu PO FV Aluminium hook 2 for manuliner Aluminium clamp Cable hanger for dent pulling work station 4 Aluminium hammers Manuliner Trolley Reference: U35065 1749.00 1950.00 SPEEDLINER COMBI 230 E.PRO Steel & Aluminium Dent Pulling Workstation ref: U35073 ALUMINIUM STEEL Complete dent pulling workstation for Steel and Aluminium body panels Automatic welding and multi tool operations Easy operation with microprocessor control panel Steel panel shrinking capabilities, slide hammer, stud welding and wavy wire welding Triggered gun option for precision welding 2m earth cable and 8m power cable 4 & 6 Gripping multihook head Consumables box Accessory kit Levelling lever without hook Levelling bar 0.85m without hook 3 Lifting rods 150/300/500mm Inertia hammer 2 Extension joints 55mm Magnetic earth 4 Aluminium hammers Manuspot Aluminium puller Ringmatic Manuliner Trolley Reference: U35073 4099.00 4662.71 www.gys-welding.com 3
MIG/MAG WELDING/BRAZING M1 GYS KIT SINGLE TORCH SYSTEM Single phase ref: U32903 MIG/MAG Welding/Brazing Machine Perfect for Car Body Repair (including Brazing) Amperage range (15-160A) welding Suitable for thin sheet welding, MIG Brazing & aluminium welding Synergic control offers optimal wire speed selection Suitable for 200mm, 300mm wire reels Available in single phase or three phase 3m Euro torch 0 0.8 mm 5kg Steel MIG wire 1 x regulator 35L/min Earth clamp Consumables box Reference: U32903 1249.00 1390.00 THREE PHASE VERSION SINGLE TORCH SYSTEM 1249.00 1456.21 T1 GYS Auto kit: Three Phase/15-200A Ref U17623 4 GYS - WHY SETTLE FOR LESS?
MIG/MAG WELDING/BRAZING M3 GYS AUTO TRIPLE TORCH SYSTEM Single phase ref: U32880 MIG/MAG Welding/Brazing Machine Perfect for Car Body Repair (including Brazing) 3 torch system enables instantaneous switching between use in Steel, Aluminium or Brazing, saving time on the repair process Suitable for thin sheet welding, MIG Brazing & aluminium welding Synergic control offers optimal wire speed selection Suitable for 100mm (1kg), 200mm (5kg) and 300mm (15kg) diameter reels Available in single phase or three phase 2x 3m Euro torch 1x Spool gun for Aluminium 2x regulators 35L/min Automatic welding helmet 0.5kg Aluminium AlSi5 wire Wire reel adaptor 5kg Steel MIG wire 5kg CuSi 3 Brazing wire Adaptor 5kg wire reels Consumables box Reference: U32880 2599.00 2768.56 THREE PHASE VERSION X3 TORCH SYSTEM 1 2 3 2599.00 2887.74 T3 AUTO kit: Three Phase/15-200A Ref U17211 www.gys-welding.com 5
INDUCTION HEATING GYSDUCTION AUTO Plastic Wedge Remote Control Bolt Inductor Body Inductor Glass Inductor Hail Dent Reduction Inductor A powerful instantaneous induction heater. Designed specifically for car body repair. Gysduction is supplied as a powerful generator and accessories of your choice (see table below) Modular system Body Inductor - removes adhesives, logos, side mouldings. Glass Inductor - removes direct glazed windows Bolt Inductor - releases mechanical part Hail Dent Reduction Inductor - can remove soft hail type dents Power: 2400W Instant heating, no flame. Only heats metal parts with accuracy whilst protecting the adjacent parts (no need to remove engine parts). Remove parts without using solvent. PRODUCT REFERENCE GYSDUCTION AUTO GENERATOR PLASTIC WEDGE GLASS INDUCTOR BODY INDUCTOR BOLT INDUCTOR DENT INDUCTOR REMOTE CONTROL TROLLEY SPOT 800 CABLE SUPPORT PRICE PROLINER GYSDUCTION AUTO 048775 1899.00 GYSDUCTION AUTO COMPLETE 053380 1697.00 GYSDUCTION AUTO MECA 048812 1349.00 GYSDUCTION AUTO GLASS 048805 1349.00 GYSDUCTION AUTO BODY SHOP 048799 1548.00 GYSDUCTION AUTO PDR 054981 1349.00 6 GYS - WHY SETTLE FOR LESS?
LIFTING SPOTLIFT ref: 052864 Lifts vehicles up to 2.5 tonnes to a height of 70cm Hydro-pneumatic pump Forks for lifting - no electric supply needed Base wheels for easy movement Features handle and trigger guard WxHxD: 129x105x73cm/85kg Reference: 052864 1349.00 1578.00 SPOTLIFT PRO ref: 053557 Lifts vehicles up to 2.5 tonnes Lifts front or back of vehicle up to 1.5m Use two lifts to raise entire vehicle Max vehicle height 60cm Min vehicle height 14cm Fully pneumatic - no electric supply needed Directional wheels Articulated arm 140 x 55 x 14/120kg Reference: 053557 1599.00 1835.00 www.gys-welding.com 7
SPOT WELDING PORTASPOT 230 ref: 022256 GYSPOT 32 DX ref: 019881 Reference: 022256 749.00 Three phase X clamp spot welder Clamping force upto 500daN Welding current 7,500A Single sided spot gun for dent pulling and spot welding 2.5m cable Cable support bracket Reference: 019881 4020.00 240V Single phase Ideal for thin steel sheets 2mm + 2mm Continuous or pulse spot welding Clamping force 30daN - 120daN Thermal protection Delivered with PX1 arms as shown 10kg GYSPOT BP-LC-S7 C CLAMP SPOT WELDER ref: U19640 C CLAMP 5 C Arms included Meets manufacturer & insurer standards Fully automatic mode GYS EDC system Equipped with C-gun 500 dan pressure Max welding current 13000A Traceability - SD card for recording spot welding history Single spot gun for dent pulling and spot welding 5 x C Arms (C1,C2,C3, C4, C6) Accessory kit for Spotter 12 x round caps (6 x A Type /6 x F Type) Cap removing wrench Tube of contact grease Inertia short hammer Monopoint electrode for the gun, with 1 cap type F 10L Special welding liquid cooling 20L De-ionized water Protective cover Reference: U19640 9499.00 12651.38 8 GYS - WHY SETTLE FOR LESS?
SPOT WELDING GYSPOT INVERTER BP-LX X CLAMP SPOT WELDER 13,000A 3 Phase Spot Welder ref: U19638 X CLAMP 6 X Arms included BODYPROTECT - Fully compliant with EU EMF standards Meets manufacturer & insurer standards Max welding current 13,000A 550Dan Single sided gun for dent pulling & welding Traceability - SD card for recording spot welding history Set of 6 arms (X4A (2), X4B, X4C, X2 (2)) Accessory kit for Spotter 2 x Bronze x 1 arms - LG120mm with 2 caps 12 x Round Caps (6 x A Type /6 x F Type) Cap Removing Wrench 6 x Bevelled Caps Tube of Contact Grease 2x Bronze inclined arms - LG220mm with 2 bevelled caps Inertia short hammer Monopoint electrode for the gun, with 1 cap type F 10L Special welding liquid cooling 20L De-ionized water Reference: U19638 7499.00 9337.61 INCLUDED: www.gys-welding.com 9
SPOT WELDING GYSPOT INVERTER EVOLUTION PTI-s7 C CLAMP SPOT WELDER 14,500A 3 Phase Spot Welder ref: U19644 GYSPOT INVERTER BP-LCX-s7 13,000A 3 Phase Spot Welder ref: U19643 INCLUDED: C CLAMP 5 C Arms included INCLUDED: X & C CLAMP 4 C Arms & 2 X Arms included Complete Dent Pulling Workstation for Steel Body Panels Specifically approved by Ford, GM and Mercedes, meets other manufacturer & insurer standards Fully Automatic - no user input required Max welding current of 14,500A Traceability - SD card for recording spot welding history 550 dan of tip pressure Optional 6m cable 5 x C Arms (C1,C2,C3, C4 & C6) Protective Cover Accessory kit for Spotter 10L of Special Welding Liquid 12 x Round Caps (6 x A Type /6 x F Type) Cap removing Wrench 20L De-ionised Water Reference: U19644 9999.00 11,963.88 Meets manufacturer & insurer standards Fully Automatic - no user input required BODYPROTECT - Fully compliant with EU EMF standards Single sided gun for dent pulling and welding Max welding current 13,000A SD card processing - Storage of spot welding history Comes with 4 C arms and 2 X arms 4 x C Arms (C1,C2,C3, C4) 2 x X Arms Protective Cover Accessory kit for Spotter 12 x Round Caps (6 x A Type /6 x F Type) 6 x Bevelled Caps Cap removing Wrench Inertia short hammer Monopoint electrode 10L Special welding liquid cooling 20L De-ionised Water Reference: U19643 10999.00 14142.16 10 GYS - WHY SETTLE FOR LESS?
RIVETING SYSTEM GYSPRESS 8T ref: 053861 Maximum pressure of 8 tonnes with integrated pressure gauge. Fast and easy arm change. C-arm swivels 360 around the riveting machine axle. Selection of arms available for difficult access situations. Easy to use ergonomic handle and trigger. Magnetic die makes rivet positioning easy. PRESSURE CONTROL 2 die keys Strap HR1S arm Handle for arm 1 box of rivets Standard die kit for extraction and rivet positioning Centre punch Carry case SPEED CONTROL OPTIONAL ADDITIONS DISCHARGE LEVER 2802.00 Reference: 053861 GYSPRESS STAND OPTIONAL ARMS WORKSTATION HR2 053878 HR3 053885 www.gys-welding.com 11
BATTERY CHARGING STARTIUM 480E ADVANCED STARTER CHARGER ref: 026483 479.00 EX VAT Startium is a revolution in products of its type - the Startium uniquely offers the charging functionality of the Batium chargers, combined with the convenience of a powerful starter with the safety features needed for modern vehicles. A complex product that is designed to solve all charging and starting problems in one simple to use unit. The Startium offers: Protection for vehicle electronics SOS recovery (sulphated battery recovery) Auto Start - current will be activated when the ignition is switched on Charges deeply discharged batteries as low as 1V Alternator test function DOES YOUR EQUIPMENT PASS THE TEST? SAFETY Does it provide protection for the vehicle s electronics? ALL BATTERY TYPES Is it compatible with all battery types? PASSED THE GYS - - TEST UNIVERSAL MODE Is it safe to charge when the battery type is unknown? Distributed by E & O.E Prices until 31.12.2016. All prices ex VAT Unit 3 Great Central Way Rugby CV21 3XH Email: uk@gys.fr Web: www.gys-welding.com 12 GYS - WHY SETTLE FOR LESS?