Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29
Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow Per Rev. at Pressures to 276 bar ( psi) Once in a great while there s a breakthrough design whose versatility opens broad new opportunities. Oildyne s mini pumps are a prime example. Mini pumps pump or meter hydraulic oil, brake fluid, and Mil 566 with equal ease. Need greater versatility? These fixed displacement axial piston pumps are efficient and powerful too. Tests run on 78 SUS viscosity fluid at 1 F @ 3 psi showed 9 percent volumetric efficiency. Capable of 276 bar ( psi) operation, mini pumps are available in nine model sizes from.156 to.865 cc per revolution displacement. Compact size, versatility, efficiency, power and speed are quietly combined in a very cost competitive package in Oildyne s mini pumps. They re suitable for most applications requiring compact power including automotive, marine, medical and military uses. Mini Pump Features.156 to.865 cc displacement per revolution. Designed for open circuit systems Fixed displacement - Output is controlled by motor speed Operating temperature range -4 C to +149 C (-4 F to +3 F). Naturally aspirated to 5 rpm and above depending upon viscosity Porting on sides or rear Will operate efficiently on extremely thin (1 cs) fluid Multiple pumps, special configurations and bi-directional pumps are available on special order. General Specifications Model 156 26 259 311 346 417 519 692 865 Displacement In 3 per rev..95.126.158.19.211.255.317.422.527 cc /rev.156.26.259.311.346.417.519.692.865 @ 3.123.163.25.247.274.33.411.548.685 cc/min @ 3 467 618 778 934 138 1252 1557 276 259 Max @ rated pressure W/O supercharge 4 42 38 38 37 37 36 35 Operating Pressure (psi) Continuous 35 35 35 35 35 35 35 325 3 Intermittent 375 375 375 375 375 375 375 35 35 Maximum 375 35 3 Parker Hannifin Corporation
Technical Information Standard Product Ordering Code H S H COMPONENT High Pressure Pump ROTATION R CW L CCW B Bi-rotational CONFIGURATION S Single pump T Tandem pump B V E PUMP BODY S Standard SHAFT & MOTOR OO Std..81" shaft, no motor OR 12 VDC, 1/3 hp, Perm. Mag., close coupled OM 24 VDC, 1/3 hp, Perm. Mag., close coupled AA 115 VAC, 345 rpm, 1/3 hp, cap. start AD 23 VAC, 345 rpm, 1/3 hp, cap. start CC 56C Kit, includes long shaft CO Long shaft, no motor (for use with 56C kit) RO No shaft, replacement pump for use only with close coupled DC motor AO Pump and shaft for use with standard 115 and 23 VAC motors above ZZ Contact Factory for specials SEALS Buna N Fluorocarbon Rubber EPR SINGLE or 1st PUMP SIZE CODE DISP. 156.156 cc/rev 26.26 cc/rev 259.259 cc/rev 311.311 cc/rev 346.346 cc/rev 417.417 cc/rev 519.519 cc/rev 692.692 cc/rev 865.865 cc/rev 2nd PUMP SIZE CODE DISP. Single pump 156.156 cc/rev 26.26 cc/rev 259.259 cc/rev 311.311 cc/rev 346.346 cc/rev 417.417 cc/rev 519.519 cc/rev 692.692 cc/rev 865.865 cc/rev NOTES: 1. Tandem pumps must have larger displacement called out first 2. Tandem pumps are not available with the standard AC or DC motors - only plain shaft or 56C Kit 3. Drive shaft input torque must be under 3.5 n-m (525 in-oz) [equivalent to HRS865 operating at 27 bar (3 psi); refer to catalog performance curves for torque data] 4. Bi-rotational pumps require the side port as case drain 5. For configurations not shown above please contact Oildyne 31 Parker Hannifin Corporation
Performance Data Performance Data Performance data shown are the average results based upon a series of laboratory tests of production units and are not necessarily representative of any one unit. Tests were run with oil at 78 SUS at 38 C (1 F). 6.15 5.1 3 H156 ( psi) 13 bar (2 psi) 27 bar (3 psi) 27 bar 2 (3 psi).4.5 25 13 bar (2 psi) 1.2 ( psi) 1 15 2 25 3 35 8.2 7 6.15 5.1 H26 3.6 27 bar (3 psi) 2.4.5 13 bar (2 psi) 25 1.2 ( psi) 1 15 2 25 3 35 In accordance with our policy of continuing product development, we reserve the right to change specifications shown without notice. ( psi) 13 bar (2 psi) 27 bar (3 psi).25 8.2 6.15 H259 ( psi) 13 bar (2 psi) 27 bar (3 psi).8.1 27 bar (3 psi) 55 13 bar 2 (2 psi).4 25 ( psi) 1 15 2 25 3 35 12.3 8.2 6 H311 ( psi) 13 bar (2 psi) 27 bar (3 psi) 27 bar (3 psi).8 55.6 13 bar.4.1 (2 psi) 25 2 ( psi).2 1 15 2 25 3 35 1 12.3 8.2 H346 ( psi) 13 bar (2 psi) 27 bar (3 psi) 27 bar (3 psi).8 55 6.6 13 bar (2 psi).4.1 25 2 ( psi).2 1 15 2 25 3 35 16.4 1 12.3 H417 ( psi) 13 bar (2 psi) 27 bar (3 psi) 8.8.2 27 bar 55 (3 psi) 6.6 13 bar (2 psi).4.1 25 2 ( psi).2 1 15 2 25 3 35 1 32 Parker Hannifin Corporation
Performance Data 2.5 18 16.4 1 H519 ( psi) 13 bar (2 psi) 27 bar (3 psi) 12.3 1.5 27 bar (3 psi) 8 8 1.2 13 bar 6 (2 psi) 6 ( psi).5 2 15 2 25 3 35 Typical Performance Data at 12 VDC as assembled with a standard DC motor Current (amps) 6 5 4 3 2 1 3.7 25 2.5 Average Input Torque Speed: 3.6 H692 Current Input H519 ( psi) 13 bar (2 psi) 27 bar (3 psi) 1.5 15 27 bar 8 (3 psi) 1. 6 13 bar (2 psi).3.5 ( psi).2 2 5 15 2 25 3 35 H346 H417 H311 H259 H26 H156 Max current for continuous operation 12.6 amps 34 69 13 138 172 27 (5) () (15) (2) (25) (3) Pressure - bar (psi) Pressure - bar (psi) 276 () 27 (3) 138 (2) 69 () 2 18 16 1 12 8 6 35.9 3.7 25.6 2.5 15.3.2 5 H865 Pump Output H519 H417 H346 H311 H259 H26 H156 2 34 69 13 138 172 27 (5) () (15) (2) (25) (3) Pressure - bar (psi) H156 H259 H346 H26 H311 H417 H519 H692 H865 ( psi) 13 bar (2 psi) 27 bar (3 psi) 27 bar (3 psi) 1.5 13 bar (2 psi) 8 1 6 ( psi).5 6.9 bar 2 (1 psi) 15 2 25 3 35.71 (1) 1.4 2.1 2.8 (2) (3) () Torque - n-m (in - oz) 3.5 (5) 4.2 (6) 33 Parker Hannifin Corporation
Dimensions Dimensions DISCHARGE 19.5 (.75) 9.52 (.375) 27. (1.6) 66.4 (2.6) MAX 2.7 2.19 (.815) (.795) 19.5 18. (4.31) (4.25) 2.6 (.81) MAX 6.6 6.1 (.26) (.24) 7.92 Ø 7.9 (.312) (.311) Ø 38.7 38.2 (1.499) (1.497) Ø 165.9 (6.53) 16.84 (.663) STANDARD PUMP WEIGHT.95 KG (2.1 LBS.) Basic Pump 16.84 (.663) 16.84 (.663) 16.84 (.663) INLET 4X #1-24 UNC-2B X.38 DP PORT SINGLE DIRECTION ROTATION (OPTIONAL INLET) PORT BI-DIRECTIONAL ROTATION (REQUIRED CASE DRAIN) ALL PORTS ARE #4 SAE 7/16-2 UNF-2B PUMP SHOWN IS CLOCKWISE ROTATION 56C ADAPTER SUPPLIED WITH COUPLING AND MOUNTING SCREWS OPTIONAL 56C ADAPTER (REQUIRES LONG PUMP SHAFT) Standard 1/3 HP DC Permanent Magnet Motor With Pump Ø 75.4 (2.97) 57.1 (2.25) 57.9 (2.28) 44.4 (1.75) SQ 9.52 (.375) 9.52 (.375) 27. (1.6) DISCHARGE (GREEN LEAD POSITIVE) 41.3 (1.62) 41.3 (1.62) 124.4 (4.9) 182.3 (7.18) MAX 12. (.47) WEIGHT OF STANDARD MOTOR IS 1.82 KG (4 LBS) INLET 55.9 (2.2) Standard 1/3 HP AC Motor With Pump 2X 3/8-16 UNC-2B X.44 DP (OPPOSITE SIDE) 8. (.31) Ø 1. (3.94) 44.4 (1.75) 58.7 (2.31) Ø 98.6 (3.88) 11.6 (4.) SQ 146.8 (5.78) 197.6 (7.78) 263.4 (1.37) 2.4 (.8) Note: All dimensions in mm (inches). 34 Parker Hannifin Corporation