FASTER CYCLES, BETTER PREFORM QUALITY

Use your smart phone to scan the QR Code FASTER CYCLES, BETTER PREFORM QUALITY www.moldmasters.com/s/mpet/ The patented icool mold stack technology provides The proprietary design of iflow manifolds and more uniform and efficient cooling over the entire pre- nozzles for PET reduces shear heat generation, form surface when compared to competitive systems. lowers energy consumption, improves balance and reduces pressure drop. icool Uniform shear generation in iflow manifolds Manufacturing locations Sales and service locations BENEFITS OF icool BENEFITS OF iflow Reduced cycle times Faster fill times Reduced water consumption Reduced hold time and pressure Increased water temperatures to eliminate the Lower AA levels (less need for AA blocker) need for chiller tonnage and dehumidification Improved dimensional stability Rapid color changes Longer mold and taper life Reduced maintenance costs Asian Headquarters Global Headquarters European Headquarters Mold-Masters Europa GmbH tel: +49 7221 50990 fax: +49 7221 53093 email: info@moldmasters.de Mold-Masters (Kunshan) Co, Ltd. tel.: +86 512 86162882 fax: +86 512 86162883 email: mmc-sales@moldmasters.com Brazil Mold-Masters do Brasil Ltda. tel: +55 19 3838 8888 fax: +55 19 3838 8887 email: vendas@moldmasters.com.br Austria / East and South East Europe Mold-Masters Handelsges m.b.h. tel: +43 7582 51877 fax: +43 7582 51877-18 email: office@moldmasters.at India Mold-Masters Technologies Private Ltd. tel: +91 422 423 4888 fax: +91 422 423 4800 email: mmtplinfo@moldmasters.com Mexico MM Hot Runner Injection México, S.A. de C.V. tel: +52 728 282 48 33 fax: +52 728 282 47 77 email: mexico@moldmasters.com France Mold-Masters France tel: +33 (0) 1 82 05 00 80 fax: +33 (0) 1 82 05 00 83 email: mmf-info@moldmasters.eu Japan Mold-Masters K.K. tel: +81 44 986 2101 fax: +81 44 986 3145 email: info@mmkk.co.jp U.S.A. Mold-Masters Injectioneering LLC tel: +1 586 752 6551 fax: +1 586 752 6552 email: mmi-inq@moldmasters.com Spain Mold-Masters España tel: +34 93 802 36 01 fax: +34 93 802 49 08 email: spain@moldmasters.eu Korea Mold-Masters Korea Ltd. Tel:+82 2 2082 4755 Fax:+82 2 2082 4756 email: mmkr-sales@moldmasters.com United Kingdom Mold-Masters (UK) Limited tel: +0044 (0) 1432 265768 fax: +0044 (0) 1432 263782 email: mmuk-all@moldmasters.co.uk Singapore Mold-Masters Singapore PTE Ltd. tel: +65 6261 7793 fax: +65 6261 8378 email: mmsinfo@moldmasters.com Mold-Masters (2007) Limited tel: +1 905 877 0185 fax: +1 905 873 2818 email: info@moldmasters.com w w w.mol dmasters.com Mold-Masters, the Mold-Masters logo and MasterPET are either trademarks or registered trademarks of Mold-Masters (2007) Limited 2012. All rights reserved. E8001-6 NEXT GENERATION PREFORM TOOLING SOLUTIONS

The new hot runner standard for IBM & ISBM INNOVATIVE PREFORM TOOLING PREFORM SOLUTIONS Mold-Masters provides technology leading PET preform molds, conversions, refurbishments and replacement stack parts that deliver savings in cycle time, energy consumption, costs and capital. By leveraging MasterPET (MPET) technologies, preform molders can breathe new life into existing capital investments. LOWER PART COST For over 45 years, Mold-Masters has led the hot runner industry in technology and performance. Through MPET, the company brings that same leadership and innovation to the preform molding industry. Faster cycles and better balance reduce bottle costs OVERALL TOOLING FEATURES 100% interchangeable with existing mold and hot runner platforms Standard interface for water, air and electric connections Fits into all major machine platforms including post mold cooling technologies with 1 to 4 position take offs COLD HALF FEATURES Mold-Masters has five manufacturing locations, seven MPET refurbishing centers and 28 service and sales locations globally. The company is the industry s largest provider of hot runner and controller technologies with more than 900 granted and pending international patents. FULLY BALANCED IN-LINE VALVE GATING SOLUTIONS Universal mold design fits into other machines without the need for a retrofit kit Patented icool conformal cooling technology for reduced cycles, lower water consumption and improved dimensional stability Long life s for extended cycles between refurbishments Patent pending Rapide quick part change option Optical part detection Superior bottle and gate quality offer higher yield and increased design flexibility Fast, simple startup reduces scrap and downtime KEY FEATURES 1-40 drop hot half designs for injection blow machines (IBM) and injection stretch blow machines (ISBM) iflow manifold technology offers rheologically balanced in-line solution Hydraulic valve gates with proven Master-Series Nozzle technology Quick, reliable actuation No stringing, Reduced crystallinity Brazed in nozzle and manifold heaters along with proven valve disk technology reduce required maintenance Industry best 10 year warranty on heated components when used with a TempMaster controller HOT RUNNER FEATURES Unique iflow hot runner design for rheologically balanced filling from 2-144 drops Flow path optimized for lower pressure drop No dead spots for faster colour change Brazed-in manifold heaters for improved uptime, precise temperature control and energy savings Optional group or individual nozzle tip control In-press replaceable nozzle tip, seal and insulator MOLD AND HOT RUNNER CONVERSIONS / REFURBISHING Precision stack components are produced centrally. The exchange and rework of the mold base is completed at a global MPET refurbishment center to reduce costs and downtime. Three levels of hot runner refurbishment packages are available Each refurbishment comes with an inspection report and warranty for the completed work PREFORM DESIGN AND PROTOTYPING Services available to allow you to reduce time and risk in bringing a new bottle to market Preform design capabilities including availability of patented Cappello lightweighting design Molding system and modular tooling available for quick preform validation and pilot production runs