istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols on illuminated versions Optional panel seal High performance LEs Long life expectancy An array of colours and voltages High performance ultrasonic welding Protection against dust and the effects of continuous immersion under pressure. Integrated resistors Easy electrical connection Robust roller contact Very long life expectancy Many electrical functions available Large variety of terminal options Up to 0 terminals Screw, solder lug and quickconnect APEM will be happy to develop custom product solutions. Please contact us with your requirements. The company reserves the right to change specifications without notice. APEM www.apem.com
Specifications Unique rocker design Wide choice of colours Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 or IP9K ELECTRICAL SPECIFICATIS Currrent/voltage rating with resistive load : Silver plated contacts : A : A VC, 00.000 cycles 0A VC, 0.000 cycles (terminals. x 0.8 only) S : 0A V, 0.000 cycles (see Overview) Gold plated contacts () : 0mA V, 0.000 cycles Current/voltage rating with lamp load silver contacts (A) : functions & : 00W VC, 0.000 cycles other functions : 0W VC, 0.000 cycles Initial contact resistance : 0 mω max. Insulation resistance :.000 MΩ min. at 00VC ielectric strength :.000 Vrms 0 Hz min. between terminals Mechanical life :0.000 cycles min. ENVIRMENTAL SPECIFICATIS Sealing options : K : IP8 to front panel components of switch only according to IEC 09 Z : IP9K panel sealing according to IN 0009 Salt spray resistance : 9 hours according to IEC, test f Vibration resistance : 000 Hz / 0 g per IEC 008 Operating temperature : 0 C to 8 C MATERIALS Case : PA Actuator : ABS Bezel : PA Contacts & terminals : brass, solid silver grain, silver plated (A or S) or brass, solid silver grain, gold plated () Contact roller : brass, nickel plated SEALING Sealing is optional. To order a sealed product, complete the appropriate box of ordering format on the following pages. IMENSIS.00 (.9).0 (.80) Flat seal 0.00 Max (.99 Max).0 (.98).00 (.).00 (.90) U8.00 (.).00 (.98) Packaging unit : 0 pieces imensions : First dimensions are in mm while inches are shown as bracketed numbers. APEM www.apem.com.00 (.80)
Overview HOW TO ORER To order a complete product, fill in all the boxes of the following order guide. To order case only (without actuator), finish your order number with the LE wiring code. To order actuator only (without case), begin the order number with code KRR, then follow the order format from actuator type until the end of the options. CASE LES KR Side A Side B SERIES Electrical functions Contacts Sealing LES Wiring Poles Single pole ouble pole R MOM MOM MOM MOM 8 MOM 9 Function only for terminal versions. A Silver Gold plated S Silver 0A *** Terminals Screw 0 terminals with barrier Solder lug/quickconnect terminals with barrier terminals w/o barrier A 0 term. with barrier B 0 term. w/o barrier C 0 terminals for use with connector U9 Normalized quickconnect,x0,8 terminals with barrier X K Z No IP8 IP9K Terminals (continued) terminals w/o barrier 0 term. with barrier E 0 term. w/o barrier F 0 term. for use with connector U9 Normalized quickconnect,8x0,8 G 0 term. with barrier H 0 term. w/o barrier J 0 terminals for use with connector U8 X A B C M R E F N S J K L P T... None LE V red LE V green LE V yellow LE V blue LE V white LE V red LE V green LE V yellow LE V blue LE V white LE V red LE V green LE V yellow LE V blue LE V white See following pages. *** S contacts for all functions except and R for normalized quickconnect terminals,x0,8 only. ACTUATOR ACTUATOR MARKING Area A Area M Area B Type Colour Orientation Symbols For nonilluminated application For illuminated application Blue / ark blue Black Green Grey Yellow Red Ivory 9 Orange A Aluminium bright N O S E A M B Symbols & Accessories : see end of section. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. APEM www.apem.com
Case To order case only (without rocker), finish your order number with the LE wiring code. MOEL STRUCTURE CASE LES Contact area Bottom view Contact & LE area Single pole ouble pole KR KR KR* KRR* MOM KR KR MOM KR KR KR KR MOM MOM KR8 KR8 MOM KR9 KR9 0 8 * Function : single pole in double pole case 0 terminal FICHIER: version CKRBVP terminal version ECHELLE: 0. indice B le 9/0/08 ELECTRICAL FUNCTIS AN CNECTIS CKRFUNA In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. For single pole models, only terminals, and are to be considered (not terminals,, ). 9 LE area CKRBVB x = w/o terminal o = with terminal = momentary Positions Positions Function * KRKR Function 8 KR8KR8 Function KRKR Function 9 KR9KR9 Function KRKR Function KR Function KRKR Function R KRR * Function only available for terminal versions. CKRFUNB CKRFUN89A APEM www.apem.com
Case TERMINALS CASE LES Screw Solder lug / quickconnect Normalized quickconnect,x0,8 Normalized quickconnect,8x0,8 Ø.00x0.0 SI (.8IAx0.0 IS) Ø.0 (.IA) ø.0 (.09IA) Ø.0 (.0IA). (.) 0.80 (.0).0 (.).x0.80 (.x.0).x0.80 (.0x.0).80x0.80 (.0x.0) 0 term. with barrier terminals with barrier terminals w/o barrier A 0 terminals with barrier B C 0 terminals w/o barrier 0 terminals for use with connector U9 terminals with barrier terminals w/o barrier 0 terminals with barrier E F 0 terminals w/o barrier 0 terminals for use with connector U9 G H J 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U8.8. (.9) (.) Terminals are marked on the case. The drawings show the maximum possible number of terminals..0 (.).8.0 (.0) (.80) 9.0 (.8) terminal version 0 terminal version CTACT MATERIALS CASE LES A Silver Silver, gold plated S Silver 0A NEW! For all functions except and R for normalized quickconnect terminals,x0,8 only. APEM www.apem.com
Case LEs SEALING CASE LES X K No sealing IP8 (front panel components of switch only) Z IP9K Installation notice available on request Ultrasonic welding of frame to case is standard on all versions. The ultrasonic welding and the optional panel seal prevent water and dust from introducing into the switch housing. Optional seal K Optional seal Z LES CASE LES Side A Side B Complete each enlarged box with one of the codes listed below. X Without LE Side A Red Green Yellow Blue White VC A B C M R VC E F N S VC J K L P T No resistor U V W Y Z LE consumption : 0mA @ nominal voltage ( C) Other illumination solutions : on request. Red/green 8 9 0 9 0 8 8 Side B 9 0 9 0 8 APEM www.apem.com
WIRING CASE LES KR series Case LEs The LE wiring diagram is shown on the case. For terminal versions LE connected to the load A (standard) B C Note : If not available, terminals are added to connect the LE. for function (onoff) with LE on side A E F For 0 terminal versions Independent LE or integrated functions 8 8 0 9 0 9 8 0 9 To have independent LEs. G (standard) H R 8 R R 8 8 R R 0 9 0 9 0 9 R Available in Single Pole only, with H and J quickconnect terminals. To obtain symbol illumination levels (night illumination when and higher illumination when ). H wiring with LE on side A available with functions, 8, 9 and. H wiring with LE on side B available with functions, and 9. H wiring with LEs available with functions 8 and 9. More information (H wiring schematics) : on request. otted line = external wiring, continuous line = internal wiring 8 0 9 To have a polarity inversion (typical application : fan motor). otted line = external wiring I Power supply betweeen and Load between and or and. Available with H and J quickconnect terminals. Please contact us for other wiring solutions. APEM www.apem.com
Actuator Marking To order actuator only (without case), begin the order number with code KRR, then follow the order format from actuator type until the end of the options. ACTUATOR TYPE ACTUATOR For nonilluminated application For illuminated application Other rocker design : on request. ACTUATOR COLOUR ACTUATOR Code Colour Code Colour Blue Grey / ark blue Yellow Black Green Red Ivory Code 9 A Colour / White Orange Aluminium bright Note : colours and / not available on illuminated versions. A softtouch varnish can be added. Consult us. MARKING ORIENTATI If no marking required, complete the box with code N. ACTUATOR MARKING Other orientations : on request N O S E 8 APEM www.apem.com
Marking Mounting SYMBOLS ACTUATOR MARKING XX No symbol Available symbols : see end of section. Marking colour White marking for illuminated rockers (laser etching) and nonilluminated black rockers (pad printing). Black marking for nonilluminated colour rockers (pad printing). Other : on request. Laser etching resistance Water and petrol resistant acccording to EN08 Tear resistant (crosscut test) according to NF ISO 09 : class 0 UV resistant according to ISO 89 A M B.0 (.) CKRMAB A M B.00 (.) R:0.00 (.8 R) R:.00 (. R) Marking area For illuminated versions. The symbol will be included in the hatched area. Marking in M area : on request. 0.0 (.9) 0.0 (.99) 8.00 MATRIX MOUNTING.0 (.0).00 mini (.98 min.).00.00 mini (.) (.80 min.) 0.0 (.0) SWITCH PANEL CUTOUT Panel thickness : 0,8 mm to, mm Recommended panel thickness : between mm and, mm.08 0/0. (.80 0/.0).80 0/0. (.9 0/.0) SPECIFIC MATRIX MOUNTING FOR Z VERSI CKREC APEM www.apem.com 9
Mouser Electronics Authorized istributor Click to View Pricing, Inventory, elivery & Lifecycle Information: Apem: KRAKXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAKXXAXX KRAKXXAXX KRAKXXA9XX KRAXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAXXAXX KR8AKXXAXX KR9AKXXAXX KR9AXXAXX KR9AKXXA/ KR9AKXXAXX KR9AXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAKXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAKXXAXX KRAKXXAXX KRAXXAXX KRAKXXAXX KRAXXAXX KR8AKXXAXX KR8AKXXAXX KR9AKXXAXX KR9AXXAXX KR9AKXXAXX KR9AXXAXX KR8BAKJJGN00 KR9AKXXAXX