AC Series 83 Split Case Pumps is a brand of ITT Corporation. Engineered for life
Engineering Specification for AC Series 83 base mounted double suction pumps Double Suction, Horizontal Split Case Pumps (Base Mounted): A. Manufacturer: Contractor shall furnish and install new double suction horizontal split case pumps for water transport and boosting applications as indicated on the drawings. Pumps shall be the AC Series 83 as manufactured by under base bid. Pumps shall meet types, sizes, capacities and characteristics as scheduled on the Equipment Schedule drawings. B. Double Suction Horizontal Split Case Pump (Base Mounted): 1. The pumps shall be long coupled, base mounted, single stage, double suction, horizontally split case design, in cast iron bronze fitted construction specifically designed and guaranteed for quiet operation. Suitable standard operations at 225ºF and 175 PSIG working pressure. Working pressures shall not be de-rated at temperatures up to 25ºF. The pump internals shall be capable of being serviced without disturbing the upper casing half and system piping. 2. A bearing housing shall supply support for a pair of heavyduty regreasable ball bearings. An inboard single row bearing will absorb thermal expansive forces while an outboard double row bearing will be clamped in place to absorb both radial and thrust loads and keep the rotating element in proper axial alignment. Bearings shall be replaceable without disturbing the system piping, the upper casing half, and shall be regreasable without removal of the bearings from the bearing housing. 3. The impeller shaft shell be a solid 416 stainless steel shaft. 4. Pump shall be equipped with a pair of internally flushed mechanical seal assemblies in direct contact with the pump shaft. Seal assemblies shall be Type 21 having a stainless steel housing, BUNA bellows and seat gasket, stainless steel spring, and be of carbon-ceramic design with the carbon face rotating against a stationary ceramic face. 5. Impeller shall be of the enclosed double suction type made of ASTM B584-876 bronze, both hydraulically and dynamically balanced to ANSI/HI 1.1-1.5-1994, section 1.4.6.1.3.1, figure 1.6, balance grade G6.3 keyed to the shaft and fixed in the axial position. 6. A flexible type coupling, capable of absorbing torsional vibration, shall be employed between the pump and motor. On variable speed applications the coupler sleeve should be constructed of an SPDM material to maximize performance life. 7. The coupling shall be shielded by a dual rated ANSI B15.1, Section 8 and OSHA 19.219 compliant coupling guard and contain viewing windows for inspection of the coupling. 8. Pump volute shall be of a cast iron (rated for 175 PSIG max. WP) axially-split design with flanges (175 PSIG drilled for 125# ANSI companion flanges) and mounting feet integral cast into the bottom half of the casing. Suction and discharge flanges shall be on a common centerline in both the horizontal and vertical planes, and the volute shall include bronze casing wear rings, priming port, gauge ports at nozzles, and vent and drain ports. The upper half casing shall be capable of being removed without disturbing piping connections or electrical motor connections. 9. Pump seal flushing shall be internal within the pump casing and shall flush the seal at a rate equal to 25% of the total pump flow.. Motors shall meet scheduled horsepower, speed, voltage and enclosure design. Pump and motors shall be factory aligned, and shall be realigned after installation by the manufacturer s representative. Motors shall be non-overloading at any point on the pump curve and shall meet NEMA specifications and conform to the standards outlined in EPACT 92. 11. Base plate shall be of structural steel or fabricated steel channel with fully enclosed sides and ends, and securely welded cross members. The grouting area shall be fully open. The combined pump and motor base plate shall be sufficiently stiff as to limit the susceptibility of bibration. The minimum base plate stiffness shall conform to ANSI/HI 1.3.4-1997 for Horizontal Baseplate Design standards. 12. Base shall be capable of being field grouted. 13. Pump rotation shall be righthand or lefthand as viewed from the pump end. 14. Pump manufacturer shall be ISO91 certified. 15. The seismic capability of the pump shall allow it to withstand a horizontal load of.5g, excluding piping and/or fasteners used to anchor the pump to mounting pads or to the floor, without adversely affecting pump operation. 16. Each pump shall be factory hydrostatically tested per Hydraulic Institute standards and name-plated before shipment. It shall then be thoroughly cleaned and painted with at least one coat of high grade paint prior to shipment. C. Accessories: 1. Where noted on schedule pumps shall be provided with internal bronze pump wear rings, special shaft materials, or special spacer couplers. 2. Where noted on schedule either balanced or unbalanced seals of EPR carbon/ceramic seals, EPR tungsten/carbide seal, or packing gland material should be used in lieu of the standard seal. 3. Where noted on schedule pumping equipment may require one or all of the following tests: certified lab tests (unwitnessed), Hydraulic Institute Level B tests, or witnessed tests. 2
Performance Curves ac series 83 METERS 5 4 3 15 5 4 FEET 15 8 6 5 4 3 118 RPM 3x2x11L 3x2x11S 6x4x12A 6x4xM 8x6x17L 6x4x14L x8xs 6x4x14A 6x4xA 8x6x12S 8x6xA 8x8x17 8x6x12M 8x6x17M 8x6x12XL 8x6x13 x8xl x8x17s x8x12l x8x12s x8x17l 12xx17 12xx12M 12xx12XL 12xx14 xx12 METERS 15 75 5 4 3 FEET 355 RPM 6 5 4 3 3x2x11S 15 8 3x2x11L 6x4xM 8x6x12M 3 2 8x6x12L 15 6 5 5 4 4 3 15 3 4 5 15 3 15 3 4 5 3 4 5 GPM 75 15 3 4 5 CUBIC METERS PER HOUR 15 3 4 5 75 15 GPM 3 4 5 75 15 3 4 5 75 CUBIC METERS PER HOUR METERS 15 75 5 4 3 15 5 4 FEET 5 4 177 RPM 3 25 15 8 6 5 4 3 3x2x11S 3x2x11L 8x6x17L x8xs 6x4x14L 8x6x17M 6x4x14A 6x4x12A 6x4xM 6x4xA 8x8x17 8x6x12M 8x6x12S 8x6x12L 8x6x12XL 8x6x13 xx12 8x6xA x8x17l x8x12l x8x12s 8x8x12 x8x17s 12xx14 12xx17 12xx12XL 12xx12M 3 2 5 5 15 3 4 5 15 3 4 5 GPM 3 4 5 75 15 3 4 5 75 15 CUBIC METERS PER HOUR 3
AC series 83 materials of construction Mechanical Seal Mounted on shaft Standard Mechanical Seal Part Name Material Cast Iron, Bronze Fitted Casing assembly Cast iron (ASTM A48 Class 35A) Casing joint gasket (suction) Paper (vellumoid 55) Casing joint gasket (discharge) Paper (vellumoid 55) Casing ring Bismuth Bronze Shaft 416 Stn. Stl. Bearing housing Cast iron (ASTM A48 Class 3A) Bearing housing Cast iron (ASTM A48 Class 3A) Bearing (inboard) ball Steel Bearing (outboard) ball Steel Stuffing box (mechanical seal) Cast iron (ASTM A48 Class 3A) Lip seal (bearing) Rubber (BUNA-N) Mechanical seal Stn. stl., rubber, carbon, ceramic Capscrew (bearing housing) Steel, grade 2 Pipe plugs (bearing housing) Steel Key, impeller Stn. stl. (ANSI 416) Key, coupling Steel O-ring (casing ring) Rubber (BUNA-N) O-ring (cover plate) Rubber (BUNA-N) Retaining ring (impeller) Steel Ring retaining (bearing) Steel End cap Steel Spirol pin (casing ring) 34 SS Impeller Bronze (ASTM B584-876) 4
L/D Ratio Construction The L/D ratio measures the comparable shaft stiffness factor between two pumps where L equals the distance between the inboard and outboard bearings and D represents the shaft diameter at the impeller. The lower the ratio, the stiffer the shaft. Excessive shaft deflection will shorten mechanical seal life, subject the shaft to fatigue stress, that could result in shaft failure and increase bearing load with a corresponding reduction in bearing life. As calculated in the table below, the AC Series 83 has a L/D ratio that is significantly below a traditional horizontal split case pump. Pump Size L = Span Between D = Diameter L = Span Between D = Diameter Bearing to Bearing (Center) Through Impeller L/D Bearing to Bearing (Center) Through Impeller L/D 3x2x11S 11.3 1.689 6.5.9 1.689 12.4 3x2x11L 11.3 1.689 6.5.9 1.689 12.4 6x4xA 14.56 1.939 7.5 25.25 1.939 13. 6x4xM 12.53 1.689 7.4 22.9 1.689 13.6 6x4x12A 12.53 1.689 7.4 22.9 1.689 13.6 6x4x14A 12.53 1.689 7.4 22.9 1.989 13. 6x4x14L 12.53 1.689 7.4 22.9 1.989 13. 8x6xA 18.25 1.939 9.4 29.57 2.439 12.1 8x6x12S 12.53 1.689 7.4 22.9 1.689 13.6 8x6x12M 14.56 1.939 7.5 25.25 1.939 13. 8x6x12L 12.53 1.689 7.4 22.9 1.689 13.6 8x6x12XL 12.53 1.689 7.4 22.9 1.689 13.6 8x6x13 16.16 1.939 8.3 27.25 1.939 14.1 8x6x17M 16.16 1.939 8.3 27.25 1.939 14.1 8x6x17L 16.16 1.939 8.3 27.25 1.939 14.1 8x8x12 16.16 1.939 8.3 27.25 1.939 14.1 8x8x17 18.59 2.439 7.6 29.9 2.439 12.3 x8x12s 18.59 2.439 7.6 29.9 2.439 12.3 x8x12l 18.59 2.439 7.6 29.9 2.439 12.3 x8x17s 18.59 2.439 7.6 29.9 2.439 12.3 x8x17l 18.59 2.439 7.6 29.9 2.439 12.3 x8xs 18.59 2.439 7.6 29.9 2.439 12.3 x8xl 18.59 2.439 7.6 29.9 2.439 12.3 xx12 21.59 2.439 8.9 32.9 2.439 13.5 12xx12M 21.59 2.439 8.9 32.9 2.439 13.5 12xx12XL 21.59 2.439 8.9 32.9 2.439 13.5 12xx14 18.59 2.439 7.6 29.9 2.439 12.3 12xx17 18.59 2.439 7.6 29.9 2.439 12.3 5
AC series 83 model 15 dimensions X YY.25" AND.5" NPT (VENT).25" NPT BOTH NOZZLES (GAUGE) YY X 4" REMOVAL CLEARANCE VH CP W HC*.5 MIN DISCHARGE Z S SUCTION S Z DISCHARGE HO 4. OPTIONAL DRIP PAN HA LEFT HAND ROTATION NOZZLES (DRAIN) VIEWED FROM PUMP END HA RIGHT HAND ROTATION 1.5 TYP. HD.75 NPT (DRAIN) HP HR HB standard: 125# FF ANSI Flange (ANSI A21., AWWA C1 & ANSI B16.1 class 125) Motor Dimensions Inches (MM) Pump Size Frame HA HB HP HR CP HC* MAX HD HO S & Z VH VH1 W X YY 3x2x11 143-215. 44. (1118) 6. 2.25 18.62 39 (991) 5.5 6.8 11.31 9.. 15.25 (388) 22.5 (56) S, L 254-365 (58) 54. (1372) (152) (57) (473) 5 (127) (14) (173) (287) (229) (254) 6x4xA 182-215 21.5 48. (1219) 6. 2.88 19.93 5 (127) 7. 7.69 12.19 11.5 12. 18.25 (464) 25.94 (659) 254-324 (546) 54. (1372) (152) (73) (56) 59 (1499) (178) (195) (3) (292) (35) 182-215 48. (1219) 43 (92) 6x4xM 254-326 24. 58. (1473) 6. 4.62 22.81 52 (1321) 18.25 (464) 26.12 (664) 6.5 7.88 13.5 11.5 13. 364-45 (6) 64. (1626) (152) (117) (579) 61 (1549) (165) () (343) (292) (33) 444-445 76. (193) 68 (1727).25 (514) 28.12 (714) 6x4x12A 215 48. (1219) 43 (92) 24. 6. 4.62 22.81 738 8.56 13.5 11.5 13. 254-326 58. (1473) 52 (1321) 18.25 (464) 26.81 (681) (6) (152) (117) (579) (188) (218) (343) (292) (33) 364-365 64. (1626) 61 (1549) 215-256 48. (1219) 45 (1143) 6x4x14A 284-365 24. 58. (1473) 6. 3.25.62 54 (1372) 19.52 (489) 28.5 (723) 7.75 9. 12.56 11.5 13. 44-45 (6) 68. (1727) (152) (83) (524) 6 (1524) (197) (234) (319) (292) (33) 444 76. (193) 64 (1625) 21.52 (547) 35. (889) 6x4x14L 182-256 24. 48. (1219) 6. 3.25.62 45 (1143) 7.75 9.62 12.56 11.5 13. 19.25 (489) 28.87 (733) 284-365 (6) 58. (1473) (152) (83) (524) 54 (1372) (197) (244) (319) (292) (33) 8x6xA 215-286 58. (1473) 56.38 (1432) 24. 6..75 29.19 8.25 9.25 17.58 12.5 12.5 324-326 64. (1626) 58.38 (1438) 21.25 (54) 3.5 (775) (6) (152) (273) (741) (2) (235) (447) (328) (318) 364-365 68. (1727) 6.38 (1534) 182-256 48. (1219) 45 (1143) 8x6x12 21.5 6. 3.25.62 9. 9.6 12.56 14. 14. 284-326 54. (1372) 51 (1295) 21.25 (54) 28.75 (73) S, L, XL (546) (152) (83) (524) (229) (244) (319) (356) (356) 364-365 6. (1524) 54 (1372) 254-326 58. (1473) 53 (1346) 24. 6. 4.63 22.81 21.25 (54) 3.85 (784) 9. 9.6 13.5 14. 14. 8x6x12M 364-45 64. (1626) 61 (1549) (6) (152) (118) (579) (229) (244) (343) (356) (356) 444-447 76. (193) 71 (183) 23.25 (591) 32.85 (835) 8x6x13 254-326 24. 62. (1575) 6. 5.63 26.19 56 (1422) 8. 9.4 16.6 13. 15.5. (58) 29.4 (747) 364-45 (6) 68. (1727) (152) (143) (665) 65 (1651) (3) (239) (48) (33) (394) 284-326 62. (1575) 56 (1442) 8x6x17 24. 6. 5.63 26.19 9. 11.75 16.6 14. 16. 364-45 68. (1727) 65 (1651) 21.25 (54) 33. (838) M, L (6) (152) (143) (665) (229) (299) (48) (356) (46) 444-445 76. (193) 71 (183) 8x8x12 254-326 24. 62. (1575) 6. 5.63 26.19 56 (1422) 8..25 16.6 14. 16.5. (58) 3.25 (768) 364-45 (6) 68. (1727) (152) (143) (665) 65 (1651) (3) (26) (48) (356) (419) 8x8x17 324-365 66. (1676) 62 (1575) 21.75 (553) 33.75 (857) 24. 6. 7. 28.94 9.5 12. 17.56 15. 16.5 44-445 76. (193) 74 (188) (6) (152) (178) (735) 23.75 (63) 35.75 (98) (241) (35) (446) (381) (419) 447-449 86. (2184) 82 (83) 254-286 62. (1575) 56 (1422) x8x12 24. 6. 7. 28.94 21.5 (546) 32. (813) 8.5.5 17.56 14. 17. 324-365 66. (1676) 62 (1575) S, L (6) (152) (178) (735) (216) (267) (446) (356) (432) 44-445 76. (193) 74 (188) 23.5 (597) 34. (864) Not for construction unless certified. 6
standard: 125# FF ANSI Flange (ANSI A21., AWWA C1 & ANSI B16.1 class 125) Continued Motor Dimensions Inches (MM) Pump Size Frame HA HB HP HR CP HC* MAX HD HO S & Z VH VH1 W X YY 324-365 66. (1676) 62 (1575) 23.25 (591) 36.6 (916) x8x17 24. 6. 7. 28.94. 12.81 17.56 16. 18. 44-445 76. (193) 74 (188) S, L (6) (152) (178) (735) 25.25 (641) 38.6 (967) (254) (325) (446) (46) (457) 447-449 86. (2184) 82 (83) 324-365 66. (1676) 62 (1575) 27.25 (692) 49.5 (1257) x8x 26. 6. 7. 28.94 14. 15.44 22.25 17.56 18.. 44-445 76. (193) 74 (188) S, L (66) (152) (178) (735) 29.25 (743) 51.5 (138) (356) (392) (565) (446) (457) (58) 447-449 86. (2184) 82 (83) xx12 284-365 24. 68. (1727) 6. 8.5 31.94 68 (1727) 22.5 (572) 33.69 (856) 9. 11.19 19.6 16. 18. 44-445 (6) 8. (32) (152) (216) (811) 81 (57) 24.5 (622) 35.69 (97) (229) (284) (484) (46) (457) 12xx12 284-365 24. 68. (1727) 6. 8.5 31.94 68 (1727) 24.5 (622) 36. (914). 11.5 19.6 16. 19. M, XL 44-445 (6) 8. (32) (152) (216) (811) 81 (57) 26.5 (673) 38. (965) (254) (292) (484) (46) (483) 324-365 66. (1676) 62 (1575) 25.25 (641) 38.69 (983) 24. 6. 7. 28.94 11. 13.44 17.56 18.. 12xx14 44-445 76. (193) 74 (188) (6) (152) (178) (735) 27.25 (692) 4.69 (34) (28) (341) (446) (457) (58) 447-449 86. (2184) 82 (83) 324-365 66. (1676) 62 (1575) 25.25 (641) 38.69 (983) 24. 6. 7. 28.94 11. 13.44 17.56 18.. 12xx17 44-445 76. (193) 74 (188) (6) (152) (178) (735) 27.25 (692) 4.69 (34) (28) (341) (446) (457) (58) 447-449 86. (2184) 82 (83) Not for construction unless certified. mechanical seal data Standard Construction 175 PSIG (12 BAR) maximum working pressure * PSIG (7 BAR) maximum suction pressure 125#FF ANSI flange (ANSI A21., AWWA C1 & ANSI B16.1 class 125) Type 21, BUNA/Carbon-ceramic, * PSIG (7 BAR) maximum suction pressure, from -º to 225ºF (-29º to 7ºC) Optional seals: Type 21, EPR/carbon-ceramic, * PSIG (7 BAR) maximum suction pressure, from -º to 25ºF (-29º to 121ºC) Type 21, EPR/carbon-tungsten carbide, * PSIG (7 BAR) maximum suction pressure, from -º to 25ºF (-29º to 121ºC) * Maximum suction pressure for 35 RPM is 85 PSIG (6 BAR). Internally Self-Flushing Seal: The AC Series 83 features internally self-flushing mechanical seals. This innovative design, and industry standard, insures maximum seal life lubrication, heat dissipation and debris removal all without vulnerable, external flush lines and filter kits that can clog and result in seal failure. With the internally self-flushing seal design, as much as 25% of the total pump flow continuously flushes the seal faces compared to only a few GPM for conventional stuffing box mounted mechanical seals. Seals remain cooler and unwanted debris is flushed away from the mechanical seal faces resulting in longer mechanical seal life. 7
3x2x11S AC SERIES 83 3x2x11L AC SERIES 83 8
6x4xM AC SERIES 83 8x6x12M AC SERIES 83 9
3x2x11S AC SERIES 83 3x2x11L AC SERIES 83
35 3 1 1 CeNTrIFugAL PuMP AC SerIeS 83 6x4xA 1775 R. P. M. 9 ToTAL HeAD, MeTerS 25 15 ToTAL HeAD, FeeT 8 7 6 5 4 NPSH, FeeT NPSH, MeTerS 15 3 3 5 5 4 6 8 1 CAPACITY, u.s. gallons Per MINuTe 5 15 25 CAPACITY, CuBIC MeTerS/Hr 6x4xM AC SERIES 83 11
6 18 CeNTrIFugAL PuMP AC SerIeS 83 6x4x12A ToTAL HeAD, MeTerS 5 4 3 ToTAL HeAD, FeeT 16 14 1 8 6 NPSH, FeeT NPSH, MeTerS 4 4 5 4 6 8 1 CAPACITY, u.s. gallons Per MINuTe 5 15 25 CAPACITY, CuBIC MeTerS/Hr 6x4x14L AC SERIES 83 12
7 24 2 CeNTrIFugAL PuMP AC SerIeS 83 6x4x14A 6 18 5 16 ToTAL HeAD, MeTerS 4 3 ToTAL HeAD, FeeT 14 1 8 6 NPSH, FeeT 6 NPSH, MeTerS 4 4 4 6 8 1 14 16 18 CAPACITY, u.s. gallons Per MINuTe 5 15 25 3 35 4 CAPACITY, CuBIC MeTerS/Hr 35 13 1 1 CeNTrIFugAL PuMP AC SerIeS 83 8x6xA ToTAL HeAD, MeTerS 3 25 15 ToTAL HeAD, FeeT 9 8 7 6 5 NPSH, FeeT 5 NPSH, MeTerS 15 4 3 4 3 5 5 5 15 25 3 CAPACITY, u.s. gallons Per MINuTe 3 4 5 6 CAPACITY, CuBIC MeTerS/Hr 13
8x6x12S AC SERIES 83 8x6x12M AC SERIES 83 14
8x6x12L AC SERIES 83 8x6x12XL AC SERIES 83 15
8x6x13 AC SERIES 83 8x6x17M AC SERIES 83 16
8x6x17L AC SERIES 83 8x8x12 AC SERIES 83 17
8x8x17 AC SERIES 83 x8x12s AC SERIES 83 18
x8x12l AC SERIES 83 x8x17s AC SERIES 83 19
x8x17l AC SERIES 83 x8xs AC SERIES 83
x8xl AC SERIES 83 xx12 AC SERIES 83 21
12xx12M AC SERIES 83 12xx12XL AC SERIES 83 22
12xx14 AC SERIES 83 12xx17 AC SERIES 83 23
3x2x11S AC SERIES 83 3x2x11L AC SERIES 83 24
15 5 CeNTrIFugAL PuMP AC SerIeS 83 6x4xA 45 4 ToTAL HeAD, MeTerS 5 ToTAL HeAD, FeeT 35 3 25 15 NPSH, FeeT NPSH, MeTerS 5 5 3 4 5 6 7 8 9 CAPACITY, u.s. gallons Per MINuTe 5 15 CAPACITY, CuBIC MeTerS/Hr 6x4xM AC SERIES 83 25
25 9 8 CeNTrIFugAL PuMP AC SerIeS 83 6x4x12A 115 R. P. M. 7 6 ToTAL HeAD, MeTerS 15 ToTAL HeAD, FeeT 5 4 3 NPSH, FeeT NPSH, MeTerS 5 5 3 4 5 6 7 8 9 CAPACITY, u.s. gallons Per MINuTe 5 15 CAPACITY, CuBIC MeTerS/Hr 3 1 CeNTrIFugAL PuMP AC SerIeS 83 6x4x14A 115 R. P. M. 9 25 8 ToTAL HeAD, MeTerS 15 ToTAL HeAD, FeeT 7 6 5 4 3 NPSH, FeeT 3 NPSH, MeTerS 5 5 4 6 8 1 CAPACITY, u.s. gallons Per MINuTe 5 15 25 CAPACITY, CuBIC MeTerS/Hr 26
6x4x14L AC SERIES 83 15 6 5 CeNTrIFugAL PuMP AC SerIeS 83 8x6xA 115 R. P. M. ToTAL HeAD, MeTerS 5 ToTAL HeAD, FeeT 4 3 NPSH, FeeT NPSH, MeTerS 5 4 6 8 1 14 16 18 CAPACITY, u.s. gallons Per MINuTe 5 15 25 3 35 4 CAPACITY, CuBIC MeTerS/Hr 27
8x6x12S AC SERIES 83 8x6x12M AC SERIES 83 28
8x6x12L AC SERIES 83 8x6x12XL AC SERIES 83 29
8x6x13 AC SERIES 83 8x6x17M AC SERIES 83 3
8x6x17L AC SERIES 83 8x8x12 AC SERIES 83 31
8x8x17 AC SERIES 83 x8x12s AC SERIES 83 32
x8x12l AC SERIES 83 x8x17s AC SERIES 83 33
x8x17l AC SERIES 83 x8xs AC SERIES 83 34
x8xl AC SERIES 83 xx12 AC SERIES 83 35
12xx12M AC SERIES 83 12xx12XL AC SERIES 83 36
12xx14 AC SERIES 83 12xx17 AC SERIES 83 37
AC SERIES 83 ORDER FORM Purchase Order #: Date: Mark/Tag: Cust. Acct. #: Ship Via: PPD COL 3RD PTY. OTHER SIC Code: Invoice to: Ship to: Special Inst.: NOTE: Circle bold codes to the left side of the tables or fill in information as appropriate. Standard offering description is highlighted and will be supplied if no option is circled. Quantity: Size: Line Tag: TABLE #1 - MODEL Model, Horizontal Pump End Only 15 Model 15, Horizontal Pump, Base, Coupling & Guard, and Pump Less Motor REO Rotating Element Only Model & Only LEFT HAND CCW ROTATION SUCTION TABLE #2 - ROTATION RIGHT HAND CW ROTATION DISCHARGE TABLE #8 - SHAFT MATERIAL 346 416 S.S. Shaft (High Strength) 316 316 S.S. Shaft TABLE #9 - MECHANICAL SEAL TYPE 4S Crane Type 21 BF(5)()1 Buna/Carbon-Ceramic 5S Crane Type 21 O(28)P(66)()1 EPT/Carbon-Ceramic 3S Crane Type 21 O(28)P(66)(15)1 EPT/Carbon-Tungsten 999 Special Mechanical Seal, Customer Specified MOTOR MOTOR DP TABLE # - BASE OPTIONS Drain Pan Under Flanges TABLE #3 - OPERATING CONDITIONS GPM GPM, Rated Flow HD FEET, Rated Head (TDH) RPM RPM, Rated Speed DIA Impeller Diameter, Inches LIQ Liquid VISQ Viscosity SG Specific Gravity TEMP TEMP, Degrees F. NPSHA Feet, NPSH Available (if less than atmospheric) SPA Suction Pressure Avail. (if greater than atmospheric) TABLE #4 - MATERIALS OF CONSTRUCTION 94 Cast Iron/Bronze Fitted Pump TABLE #5 - IMPELLER MATERIAL 1 Bronze Impeller N IRB DISCHARGE NOTE: VIEW IS FROM ABOVE PUMPS, LOOKING DOWNWARD. NOT BURIED IN GROUND LOOKING UPWARD. TABLE #6 - IMPELLER RING No Impeller Rings (Std) Bronze Impeller Rings TABLE #7 - CASING RING 166 Bronze Casing Ring SUCTION 38 TABLE #11 - COUPLING NC No Coupling (Standard on Model ) WS Woods Sureflex Cplg.Epdm 143-324 Mtr.Frm/Hytrel 326T & Up Mtr Frm (Standard on Model 15) WSE Epdm Option For 326 & Up Mtr Frm W/Woods Sureflex Coupling. WSS Woods Sureflex Spacer Cplg.Epdm 143-324 Mtr Frm/Hytrel 326 & Up Mtr Frm WSSE Epdm Option For 326 & Up Mtr. Frm. With Woods Sureflex Spacer Cplg. FS Falk Steelflex Coupling FSS Falk Steelflex Spacer Coupling 999 Special Coupling, Customer Specified TABLE #12 - MOTOR HP (1-45HP) 999 SPECIAL HP TABLE #13 - SPEED/HERTZ 36 RPM/6 HZ 15 RPM/5 HZ 3 RPM/5 HZ 1 RPM/6 HZ 18 RPM/6 HZ RPM/5 HZ TABLE #14 - MOTOR FRAME SIZE 143 213 284 364 444 145 215 286 365 445 182 254 324 44 447 184 256 326 45 449 999 Special Motor Frame Size 2BD 3/7 1
AC SERIES 83 ORDER FORM (cont.) TABLE #15 - FRAME CONFIGURATION T Horizontal, T Frame TS Horizontal, TS Frame 999 Special Motor Config. TABLE #16 - MOTOR MOUNTING 1 B&G to Supply and Mount Motor 2 Customer to Supply and Mount Motor (PLM) 3 Customer to Supply, B&G to Mount Motor Motor Manufacturer: 4 B&G to Supply, Customer to Mount Motor NONE B8 B B11 B13 TABLE #17 - PERFORMANCE TESTS No Performance Test Non-Witnessed Cert. Perf. Test Level B-Head & Flow Non-Witnessed Cert. Perf. Test Level B-Head, Flow & Efficiency. Customer Witnessed Perf. Test Level B-Head & Flow Customer Witnessed Perf. Test Level B-Head, Flow & Efficiency. TABLE #18 - HYDROTEST B1 Standard Hydrotest C4 Customer Witnessed Hydrotest 999 Other Witnesses Or Certified Hydrotest, Customer Specified. TABLE #19 - SPECIAL REQUIREMENTS QUOTE ATTACHED: NOTE: Complete Tables 27-39 only if the motor is to be supplied by B&G. TABLE #27 - MOTOR HP (1-45hp) 999 Special HP TABLE #28 - SPEED/HERTZ 36 RPM/6 HZ 15 RPM/5 HZ 3 RPM/5 HZ 1 RPM/6 HZ 18 RPM/6 HZ RPM/5 HZ TABLE #29 - MOTOR ENCLOSURE ODP Enclosure WPII WP II Enclosure TEFC Enclosure WPI WP I Enclosure EP Explosion Proof Enclosure 999 Special Enclosure TABLE #3 - MOTOR PHASE/VOLTAGE T 3PH, v TD 3PH, 23/46v T8 3PH, 8v T38 3PH, 19/38v T23 3PH, 23v TS38 3PH, 38v T4 3PH, 4v T575 3PH, 575v T46 3PH, 46v T23 3PH, 23v TT 3PH, 8/23/46v T416 3PH, 416v 999 Special Phase/Voltage Purchase Order #: Representative Name: Cust. Acct. #: TABLE #31 - MOTOR SERVICE FACTOR 1. 1. Service Factor 1.15 1.15 Service Factor 1.I 1.15 Service Factor (Sinusoidal Duty) 1. Service Factor (Inverter Duty) 999 Special Minimum Service Factor TABLE #32 - MOTOR INSTALLATION STD Standard Insulation B Class B Insulation F Class F Insulation H Class H Insulation 999 Special Insulation TABLE #33 - MOTOR EFFICIENCY EPACT EPACT Energy Efficient STD Standard Efficiency P Premium Efficiency 999 Special Efficiency TABLE #34 - MOTOR OPTIONS 999 Special Option TABLE #35 - MOTOR MANUFACTURER FC Factory Choice US U.S. Motors CY Magnetek MN Marathon Electric WEG Weg 999 Special Manufacturer TABLE #36 - MOTOR CONFIGURATION T Horizontal, T Frame TS Horizontal, TS Frame 999 Special Configuration TABLE #37 - MOTOR FRAME SIZE 143 213 284 364 444 145 215 286 365 445 182 254 324 44 447 184 256 326 45 449 999 Special Motor Frame Size TABLE #38 - MISCELLANEOUS MOTOR OPTIONS INV Inverter Duty Motor 999 Special Miscellaneous Motor Options TABLE #39 - MOTOR START 9 Across the Line 6 Part Winding Start Wye Delta ADDITIONAL INFORMATION: Purchasing Agent 39 2
USA Bell & Gossett 2881 East Bayard Street Seneca Falls, NY 13148 Phone: 315-568-7123 FAX: 888-322-5877 www.bellgossett.com and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Corporation. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. BAC83 May, 8 8 ITT Corporation Engineered for life ITT 8 N. Austin Ave. Morton Grove, IL 653 Phone: 847-966-37 FAX: 847-966-26 www.goulds.com