Back to FC 13 WINDLASSES & ACCESSORIES PRO FISH HORIZONTAL FREE FALL ANCHOR WINDLASS All the features of the Pro-Series with Automatic Freefall. 100% 316 stainless steel case 12V motor provides fast line speed Manual recovery with a standard 1 /2" socket ratchet DIY ready kit includes: Windlass, base gasket seal, fast mounting studs, installation wrench, circuit breaker, dual-direction solenoid and rocker switch 5 Year Warranty 700: Rope size: 1 /2" 3 strand and 8 plait. Chain size: 1 /4" G4 ISO. Motor power: 500 watts 1000: Rope size: 9 /16" - 5 /8" 3 strand and 8 plait ( 5 /8" only). Chain size: 5 /16" G4. Motor power: 700 watts Includes circuit breaker and toggle switch Model Boat Size 239-6656211107301 Pro Fish 700FF Up to 33' 1,029.99 239-6656411108102 Pro Fish 1000FF Up to 38' 1,120.99 PRO SERIES HORIZONTAL STAINLESS STEEL WINDLASS Power In, power out with manual freefall. 100% 316 Stainless steel case 12V motor provides fast line speeds Manual recovery with a standard 1 /2" socket ratchet Above deck installation, easy to install DIY ready kit including: Windlass, base gasket seal, fast mounting studs, installation wrench, circuit breaker, dual-direction solenoid and rocker switch 5 year warranty 700: Rope size: 1 /2" 3 strand and 8 plait. Chain size: 1 /4" G4/BBB ISO. Motor power: 500 watts. 1000H: Rope size: 9 /16"-5/8" 3 strand and 8 plait ( 5 /8" only). Chain size: 5 /16" G4. Motor power: 700 watts. Model # Boat Size 239-6656011107301 700H Up to 33' 919.99 239-6657011108102 1000H Up to 38' 1,015.99 V700 VERTICAL WINDLASS 100% 316 stainless steel deck unit Fall Safe anchor lock Fast line speed Manual recovery option Impact-resistant motor cover With reed switch and magnet fitted as standard for chain counter applications Fits calibrated chains: 6mm DIN766, 1 /4" G4 or BBB, 7mm DIN766 Kit includes: windlass, base gasket seal, mounting studs, contactor and circuit breaker 5 year warranty Boat Size 239-6670011107312 Up to 35' 832.99 PRO SPORT 550 HORIZONTAL WINDLASS Powerful motor providing superior line speed Low power consumption/current draw Manual freefall Dual direction powered operation 1 /4" chain, gypsy size Rope size: 1 /2" 3-strand and 8 plait Maximum pulling power: 500 lbs./225kg 3 year warranty Convenient above deck installation. Kit includes: windlass, base gasket seal, fast mounting studs, installation wrench, toggle switch & circuit breaker. Boat Size 239-6656811197303 Up to 28' 619.99 FOOT SWITCH FOR WINDLASS WINDLASS SERIES ANCHOR RODE For use on bow as additional switch station. Controls operation with a steady touch of the foot Designed for top performance with all Lewmar V series and Pro series windlasses. ACCO hi-test, hot-dipped galvanized chain and Suitable for DC electric windlasses running on 12v or 3-strand nylon twist rope that is chemically treated to remain 24v flexible after constant exposure to salt water and sun. A special Single direction switch tapered splice allows smooth transition from rope to chain Hinged cover to prevent accidental operation Normally open contact, 5A (12 & 24v) Ready to install Must be used with a contactor or control box Chain Size Line Size Color Type 239-68000917 White Up 34.99 239-68000918 White Down 34.99 239-69000332 1 /4" x 10' G4 1 /2" x 150' 199.99 239-69000334 1/4" x 15' G4 1/2" x 200' 292.99 239-69000335 1 /4" x 15' G4 1 /2" x 300' 414.99 239-69000339 5/16" x 20' G4 9/16" x 200' 343.99 DECKHAND ELECTRIC ANCHOR WINCHES ANCHOR WINCHES Automatically raise or lower your anchor. 12 volt operation. anti-drag system senses bottom to allow for controlled drifting. Then, at the touch of a button, lock the winch to prevent drifting. Anchor not included. DH-25: Pre spooled with 60' of 800 lb test nylon rope. Includes remote mountable anchor davit. Consistent hole pattern with older DeckHand models. DH-40: Pre spooled with 100' of 800 lb test rope. Universal davit can be mounted at base or in remote position. Stows anchor horizontally to eliminate anchor swing. DECKHAND Pontoon Winch includes: Standard DH 40 anchor winch (20-40 lb anchor capacity), MKA 16 quick release bracket, DH-40 corded remote and MKR12 quick connect plug. 1810125 1810140 Description Max. Load 27-1810125 DH-25 25 lbs. 210.99 27-1810140 DH-40 40 lbs. 280.99 27-1810141 Pontoon Deckhand 40 lbs. 355.99 1810141
14 ELECTRIC ANCHOR WINCHES & ACCESSORIES 24' CLASS PONTOON ROPE ANCHOR WINDLASS PONTOON 35 ANCHOR WINCH Designed especially for pontoon, pike and bass boats. With a line pull of 200 lbs., this unit retrieves the anchor at the rate of 80 ft. per minute. For river, mushroom or navy type anchor - anchor not included. 100' line, remote switch and circuit breaker. 13-P77724 250.99 FISHERMAN 25 ANCHOR WINCH Perfect for smaller boats. Power up/down with antireverse internal clutch to prevent free-spooling. 65 fpm no-load rope retrieval speed. Includes 100 of 0.20 prewound braided anchor rope, automatic resetting circuit breaker, anchor safety chain, sealed membrane UP/DOWN switch, 14-gauge marinegrade battery wire, assembly hardware and instructions and a 2 Year Manufacturer's Warranty. Separate roller davit included. Dimensions (LxWxH): 10" x 9.75" x 5.75" Davit Dimensions (LxWxH): 9.5" x 3.5" x 5" T1010125sw: includes additional corrosion protection, added UV inhibitors and stainless steel hardware. Max Model Capacity Boat Size Color 452-T1010825 Freshwater 20-25 lbs. up to 20' Black 140.99 452-T1010125SW Saltwater 20-25 lbs. up to 20' White 200.99 Suitable for applications requiring heavier anchors, up to 35 lbs. Ideal for pontoon boats of all sizes. Power up/down with anti-reverse internal clutch to prevent free-spooling. 65 fpm no-load rope retrieval speed. Includes 100 of 0.20 pre-wound braided anchor rope, automatic resetting circuit breaker, anchor safety chain, sealed membrane UP/DOWN switch, 14-gauge marine-grade battery wire, assembly hardware and instructions and a 2 Year Manufacturer's Warranty. Integrated roller davit. Dimensions: 19.5" L x 9.75" W x 5.75" H. Model Max Capacity Boat Length Color 452-T1010935 Freshwater 30-35 lbs. up to 22' Black 160.99 452-T1010235SW Saltwater 30-35 lbs. up to 22' White 220.99 ANCHOR WINCH SECOND SWITCH KIT This switch to be installed at the helm or wherever you choose, provides a second option for control of the electric anchor winch. The switch on the winch cover will continue to operate as well. This second switch kit works with all TRAC anchor winches. 452-T10115 29.99 BIGWATER 45 ANCHOR WINCH Suitable for larger craft such as deck boats or where excessive winds call for heavier anchors. Large capacity with small foot print. Power up/free-fall down. 70 fpm no-load rope retrieval speed. Built-in light comes on when anchor is raised or lowered. Includes 100 of 0.20 pre-wound braided anchor rope, automatic resetting circuit breaker, anchor safety chain, sealed membrane UP/DOWN switch, 14-gauge marine-grade battery wire, assembly hardware and instructions and a 2 Year Manufacturer's Warranty. Separate roller davit included. Dimensions (LxWxH): 10.1" x 8.3" x 6.5" Davit Dimensions (LxWxH): 6" x 3.5" x 5" T1010345sw: includes additional corrosion protection, added UV inhibitors and stainless steel hardware. Max Model Capacity Boat Size Color 452-T1011045 Freshwater 45 lbs. up to 24' Black 200.99 452-T1010345SW Saltwater 45 lbs. up to 24' White 250.99 ANCHOR WINCH WIRELESS REMOTE KIT Compact remote control allows push-button anchor operation from any location. A snap-in case can be attached anywhere including at the helm. Works with all TRAC anchor winches. 452-T10116 50.99
15 ANCHOR LINE AND CHAIN THREE STRAND TWISTED NYLON ANCHOR LINE Extremely strong line designed to absorb sudden shock loads. Comes with thimble. Size Color 50-40711 3/8" x 100' White 34.99 50-40721 3 /8" x 150' White 45.99 50-40731 1 /2" x 100' White 52.99 50-40741 1 /2" x 150' White 72.99 50-40751 1 /2" x 200' White 92.99 ANCHOR SWIVEL 316 Stainless Steel Used between anchor and lead chain or between chain and anchor line. Prevents chain and anchor rope from getting twisted. Chain Size Length Working Load Breaking Strength Anchor Side Chain Side 50-44501 1 /4"- 5 /16" 3 1 /2" 2,500 7,500 5 /8" 9 /32" 24.99 50-44511 3 /8"- 1 /2" 4 5 /8" 6,000 14,000 7 /8" 1 /2" 48.99 50-44521 1/2"- 3 /4" 6" 14,000 22,500 1 3 /16" 9/16" 85.99 PVC COATED ANCHOR LEAD CHAIN White PVC coated hot dipped galvanized proof coil chain. Grade G4. Oversized links on both ends. Size Boat Size 50-44401 3 /16" x 4' 10' - 15' 12.99 50-44421 1 /4" x 4' 16' - 32' 16.99 50-44441 5 /16" x 5' 26' - 40' 29.99 50-44461 3 /8" x 6' - 39.99 DOUBLE BRAID NYLON ANCHOR LINE Extremely strong line designed to absorb sudden shock loads. Comes with thimble. Size Color 50-42201 3/8" x 100' Black 44.99 50-42321 3 /8" x 100' Gold / White 42.99 50-42331 3/8" x 150' Gold / White 60.99 50-42361 1 /2" x 100' Gold / White 74.99 50-42281 1 /2" x 150' Black 109.99 50-42371 1 /2" x 150' Gold / White 103.99 50-42381 1 /2" x 200' Gold / White 135.99 Hot dipped galvanized proof coil anchor lead chain supplied with 2 hot dipped galvanized shackles. Grade 30. Size Shackle Working Load Breaking Load Boat Size 50-44101 3 /16" x 4' 1 /4" 705 lbs. 3,000 lbs. 10' - 15' 6.99 50-44121 1/4" x 4' 5/16" 1,250 lbs. 5,000 lbs. 16' - 32' 9.99 50-44141 5 /16" x 5' 3 /8" 1,875 lbs. 7,500 lbs. 26' - 40' 16.99 Black GALVANIZED ANCHOR LEAD CHAIN WITH SHACKLE Gold/White PWC SAND ANCHOR WITH BUOY ANCHORS SCREW ANCHOR SYSTEM A sand anchor is ideal for PWCs in shallow water to keep the impeller off the beach. Fill this super durable tri-laminate anchor bag with up to 35 pounds of rocks or sand. A buoy marks the anchor s location. 455-A1 19.99 PWC FLUKE ANCHOR Screw the zinc plated anchor into the beach. Snap hook is provided at each end of the 25 foot long purple/yellow/red rope. Snap one to the screw anchor and the other to the PWC or small boat. A padded nylon storage case protects water craft and boats and dampens noise while stowed. 455-A3 22.99 This vinyl-dipped fluke anchor weighs only 1 3 /4 pounds, and won t scratch finishes. Perfect for PWCs and other small craft, a 25 foot marinegrade rope is spliced to it. A sturdy nylon case is also included. 455-A5 28.99 GRAPNEL FOLDING ANCHOR The 3 1 /3 pound 4-fluke folding anchor will hold in mud, sand, gravel and rock. It s designed for boats, sailboats, personal watercraft, inflatable boats, canoes and float tubes. A 25 ft. long marine-grade rope, with an in-line buoy. 455-A2 37.99
16 ANCHORS & ANCHOR KITS DANFORTH TRADITIONAL STANDARD ANCHOR DELTA FAST SET GALVANIZED ANCHOR Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model Weight Holding Strength A B C Boat Size 241-94010 2-1/2S 3.5 lbs. 160 17 1 /4" 13" 9" 10' 24.99 241-94011 4S 5 lbs. 300 19 1 /2" 14 3 /4" 10 1 /2" 17' 29.99 241-94012 8S 9 lbs. 600 24" 18 1 /4" 12 27' 26.99 241-94013 13S 14 lbs. 920 28 1 /4" 21 1 /2" 14 1 /4" 31' 43.99 241-94014 18S 16 lbs. 1300 31 3 /4" 24" 16 1 /2" 36' 95.99 241-94015 22S 25 lbs. 1600 35" 26 3 /4" 19" 40' 119.99 Self-launching and fast setting for quick, hassle-free. The carefully engineered weight distribution and apex ballasting allows the Delta to start setting right when it hits bottom, for quick without dragging. Galvanized Steel. Weight Boat Size 239-0057406 14 lbs. 20-30' 139.99 239-0057410 22 lbs. 30-40' 199.99 239-0057416 35 lbs. 40-50' 279.99 UTILITY ANCHOR Quality at an economical price Hot dipped galvanized. The effective slip-ring design assures easy retrieval. Single piece crown construction for extra anchor strength. Size Height Boat Size 50-41600 5E 11 3 /4" 10'-15' 12.89 50-41610 7E 14 1 /2" 15'-19' 13.69 50-41620 10E 16 3 /4" 20'-24' 16.99 50-41630 13E 19 1 /2" 25'-28' 22.99 50-41640 15E 21 3 /4" 28'-30' 29.99 DELUXE ANCHOR Dollar for dollar your best buy in anchors Superior holding power in a traditional designed anchor. Each anchor is hot dipped galvanized for maximum corrosion protection. Individually inspected to assure quality and workmanship. Reinforced wide flukes penetrate deeply and firmly for maximum holding power. ly engineered angles and welded crown configuration provide unsurpassed strength and durability. Boat Size Height Size 50-41720 8S 22 1 /2" 17'-24' 21.99 50-41730 13S 27 1 /8" 25'-30' 36.99 50-41740 18S 30" 31'-34' 38.99 50-41750 22S 34 3 /8" 35'-38' 54.99 50-41760 43S 40 3 /4" 39'-45' 101.99 ANCHOR KIT Anchor Line Utility Deluxe Kit Contains: One (1) Anchor One (1) Anchor Lead Chain One (1) Nylon Anchor Line Anchor Chain Anchor Lead Chain with Shackle Hot Dipped Galvanized proof coil anchor lead chain 1 /4" x 4' with two (2) 5 /16" shackles. Nylon Anchor Line 3 /8" x 150' Anchors Each anchor is hot dipped galvanized for maximum corrosion protection Type Boat Size / 50-41622 10E Utility (41620) 20'-24' 96.99 50-41722 8S Deluxe (41720) 17'-24' 116.99 50-41732 13S Deluxe (41730) 25'-30' 133.99
17 ANCHORS PLOW ANCHOR Hot dipped galvanized for lasting corrosion protection. Quick setting geometric design provides stability and high holding power. Perfect for sand, pebble, rock, grass, kelp and coral bottoms. craft and dinghies. Weight Weight Anchor Size Boat Size 50-41540 14 lbs. 21 1 /4" L x 8" W 24-31' 77.99 50-41550 22 lbs. 24 1 /2" L x 12 3 /4" W 32-41' 97.99 50-41560 35 lbs. 28 3 /4" L x 10 3 /4" W 42-52' 147.99 50-41570 44 lbs. 34 1 /4" L x 15 1 /2" W 47-58' 202.99 MUSHROOM ANCHOR For small boats and mooring buoys. One-piece cast iron in two coating choices: double dipped painted aluminum for rust resistance and heavy gauge black vinyl for hull protection. Most effective in sand or mud. Weight Boat Size Black Vinyl Coated Iron 50-41200 8 lbs. Up to 10' 18.99 50-41220 10 lbs. Up to 12' 24.99 50-41260 15 lbs. Up to 16' 33.99 Aluminum Painted Iron 50-41280 8 lbs. Up to 10' 17.99 50-41300 10 lbs. Up to 12' 23.99 50-41340 15 lbs. Up to 16' 30.99 41200 41280 FOLDING GRAPNEL ANCHOR Made of malleable iron, heavily galvanized. Operates and folds up easily to store. Lockable in open and closed position. Great for small 50-41050 1 1 /2 lbs. 7.99 50-41000 3 1 /2 lbs. 15.89 50-41010 5 1 /2 lbs. 21.99 50-41020 7 lbs. 27.99 NAVY ANCHOR Weight 50-41360 10 lbs. 21.99 50-41370 15 lbs. 29.99 RIVER ANCHOR Weight Color 50-41500 12 lbs. Black 28.99 50-41510 15 lbs. Black 35.99 50-41520 20 lbs. Black 42.99 50-41530 30 lbs. Black 70.99 Closed Aluminum Painted Iron Double-dipped painted aluminum for rust resistance. Large cast rope eye. For use in gravel, stone and shale bottoms. Vinyl coated iron anchors. Will catch and hold to rough bottom. Penetrates better than regular mushroom anchors. ANCHOR ROLLERS ANCHOR ROLLER Stainless Steel. URM2: Heavy-gauge model, built for holding Danforth and Fortress (through FX 23) on sail or power boats. The flared mounting tips help to eliminate chafe. Bolt-on mounting. URM4: Heavy-duty design to hold Danforth 13-28 lbs., Fortress and Delta type anchors. Ideal for mounting where there is limited deck space. URM3: Heavy-duty. Securely stows Danforth, Fortress, and Delta type anchors for sail and power boats. Stainless bail. Chafe-free design. URM2 URM4 URM3 Maximum Rope Size Max Chain Size Max Anchor Size Boat Size Size 332-URM2 1" 3 /8" 5-13 lbs. 25' 15 1 /2" x 2" 109.99 332-URM4 - - 13-28 lbs. 35' 18" x 3 1 /2" 180.99 332-URM3 1 1 /2" dia 1 /2" 12-60 lbs. 25'-54' 22 3 /4" x 4 1 /4" 225.99 STAINLESS CAPTIVE ROLLER 328057 328053 328054 328064 3 /8" bolt fastener. Type Line Size Length Wheel Size 354-328057 Short Up To 1" 9" 1 3 /4" x 1 1 /2" 66.99 354-328053 Medium Up To 1" 11" 1 3 /4" x 1 1 /2" 89.99 354-328054 Long Up To 1" 15 1 /2" 1 3 /4" x 1 1 /2" 86.99 354-328064 Medium Up To 1 1 /2" dia.19 1 /4" 2 15 /16" x 2 3 /4" 170.99
18 ANCHOR ACCESSORIES ANCHOR-TITE ANCHOR TENSIONER LIFT 'N' LOCK ANCHOR CONTROL Heavy duty stainless steel anchor tensioner that holds the anchor securely to the anchor roller to prevent rattle. Locks in place yet allows quick-release for safety. Anchor Wt. Size 332-AT3 up to 90 lbs. 4 1 /2" L x 1 1 /2" W 68.99 ANCHOR MASTER Easily and safely retrieve the anchor preventing potential back pain and the danger of falling overboard - let your boat do the work for you. Slip ring attaches to buoy around anchor line, drive past anchor, and the buoy lifts the anchor to the surface. No springs to malfunction, no plastic parts to break. All stainless steel hardware for a durable, non-corrosive system. Description 232-AR1DP Complete Anchor Master w/12" Buoy 90.99 Zinc plated steel anchor lift and nylon pulley system. Zinc plated steel sleeve controls anchor from any position. Accommodates 1 /4" to 7 /16" diameter rope. Supports anchors up to 20 lbs. 50-41481 8.99 LIFT 'N' LOCK ANCHOR CONTROL Supports anchors up to 20 lbs. with 1 /4" to 1 /2" dia. line. Controls anchor from any position. Zinc-plated steel. 23-137007 9.99 RAIL MOUNT ANCHOR BRACKET Fits all Danforth and Deepset anchors on pulpit or rail. Grips anchor securely. Quick release for emergencies. Anchors up to 35 lbs. are held away from rail, with flukes downward to prevent snagged lines. All stainless. Bracket fits both 7 /8" and 1" rails. 332-PM1 46.99 DOCK LINE 3-STRAND TWISTED NYLON DOCK LINE DOUBLE BRAID NYLON DOCK LINE Extremely strong rope with 10" eye splice ( 3 /4" rope: 18" eye splice). Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and marine growth. Clamshell packed. Size Color 50-42511 3 /8" x 15' White 5.99 50-42521 3 /8" x 20' White 6.99 50-42531 3/8" x 25' White 7.99 50-42551 1 /2" x 15' White 8.99 50-42561 1 /2" x 20' White 10.99 50-42571 1/2" x 25' White 13.99 50-42581 1 /2" x 30' White 15.99 50-42591 5 /8" x 20' White 17.99 50-42601 5 /8" x 25' White 21.99 50-42611 5 /8" x 30' White 24.99 50-42621 5/8" x 35' White 28.99 Premium double braid dock lines complete with 15" eye splice ( 3 /4" rope: 18" eye splice). Pre-shrunk and heat stabilized. These lines offer higher wet strength and better abrasion resistance than Black Gold/White other nylons. Won t mold or mildew. Individually clamshell packed. Color Size 50-40291 Black 3/8" x 15' 7.99 50-40271 Black 3 /8" x 20' 9.99 50-40321 Black 3 /8" x 25' 11.99 50-40351 Black 1 /2" x 15' 12.99 50-40401 Black 1 /2" x 20' 16.99 50-40381 Black 1 /2" x 25' 19.99 50-40441 Black 5 /8" x 25' 31.99 50-40421 Black 5/8" x 35' 43.99 50-40011 Gold/White 3 /8" x 15' 7.99 50-40081 Gold/White 3 /8" x 20' 9.99 50-40021 Gold/White 3 /8" x 25' 11.99 50-40031 Gold/White 1 /2" x 15' 12.99 50-40241 Gold/White 1 /2" x 20' 17.99 50-40041 Gold/White 1 /2" x 25' 19.99 50-40051 Gold/White 5 /8" x 25' 31.99 50-40061 Gold/White 5 /8" x 35' 43.99
19 FENDER LINES DOUBLE BRAIDED 100% MFP DOCK LINE DOUBLE BRAIDED NYLON FENDER LINE New high tenacity, colored, braided, polypropylene line. Made of non-stretch material that floats. Clamshell packed. Black w/ Red Tracer Blue w/ Black Tracer Burgundy w/ Black Tracer Premium double braid. Spliced on one end. 2 per pack Green w/ Black Tracer Size Color 50-42431 3/8" x 15' Black w/ Red Tracer 7.99 50-42411 3/8" x 15' Blue w/ Black Tracer 7.99 50-42451 3 /8" x 15' Burgundy w/ Black Tracer 7.99 50-42441 3/8" x 15' Green w/ Black Tracer 7.99 50-42421 3 /8" x 15' Red w/ Black Tracer 7.99 50-42401 3/8" x 15' White w/ Black Tracer 7.99 MOORING SNUBBER Red w/ Black Tracer Ideal for both motor and sailing boats. The forces the line is exposed to are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat s hardware. White w/ Black Tracer Line Size Boat Size 686-90302F 3 /8" - 7 /16" 20' 30.99 686-90304F 7 /16" - 5 /8" 26' 40.99 686-90306F 9 /16" - 3 /4" 40' 58.99 BUNGEE DOCK LINES Size Color / PK 50-40861 1 /4" x 6' Black 4.99 50-40831 1 /4" x 6' Blue 4.99 50-40911 1 /4" x 6' Burgundy 4.99 50-40851 1 /4" x 6' Forrest Green 4.99 50-41891 1/4" x 6' Gold/White 5.79 50-40881 1 /4" x 6' Navy 4.99 50-40891 1 /4" x 6' Purple 4.99 50-40841 1 /4" x 6' Red 4.99 50-40871 1 /4" x 6' Teal 4.99 50-40901 1 /4" x 6' White 4.99 50-40821 1 /4" x 6' Yellow 4.99 50-40961 3/8" x 6' Black 7.99 50-40931 3 /8" x 6' Blue 7.99 50-40981 3/8" x 6' Burgundy 7.99 50-40951 3 /8" x 6' Forrest Green 7.99 50-40991 3/8" x 6' Gold/White 7.99 50-40971 3 /8" x 6' Navy 7.99 50-40941 3 /8" x 6' Red 7.99 50-40921 3/8" x 6' White 7.99 FENDERS Black Blue Burgundy Forrest Green Gold/White Navy Purple Red Teal White Yellow Bungee cord is hidden inside the rope and acts as a builtin snubber. Two foam floats protect the boat from chafing. Sliding adjustment at both ends for quick. Absorbs shock to boats, cleats, docks, pylons and other Soft vinyl Molded ribs Inflation valve to adjust firmness Molded-in eyelets Vertical or horizontal use hardware. Color Size Eye Boat Size Color Size 253-AHDL4 Black/Blue/Red 4', stretches to 5 1 /2' 9.99 253-AHDL5 Black/Blue/Red 5', stretches to 7' 11.99 253-AHDL6 Black/Blue/Red 6', stretches to 9' 12.99 50-79231 White 4" x 16" 9 /16" 10' - 15' 10.99 50-79221 White 5" x 18" 5 /8" 15' - 20' 12.99 50-79211 White 6" x 22" 3 /4" 20' - 25' 17.99 50-79201 White 8" x 26" 3 /4" 25' - 35' 29.99
21 FENDERS & ACCESSORIES HULL GARD INFLATABLE VINYL FENDER Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets. Custom inflated to correct pressure. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Size Color 32-1020 3 1 /2" x 13" White 15.99 32-1021 4 1 /2" x 16" White 16.99 32-31722 5 1 /2" x 20" Black 19.99 32-41022 5 1 /2" x 20" Blue 19.99 32-541022 5 1 /2" x 20" Green 19.99 32-571022 5 1 /2" x 20" Navy Blue 19.99 32-551022 5 1 /2" x 20" Red 19.99 32-1022 5 1 /2" x 20" White 19.99 32-581022 5 1 /2" x 20" Yellow 19.99 32-31723 6 1 /2" x 23" Black 30.99 32-41023 6 1 /2" x 23" Blue 30.99 32-541023 6 1 /2" x 23" Green 30.99 32-571023 6 1 /2" x 23" Navy Blue 30.99 32-551023 6 1 /2" x 23" Red 30.99 32-601023 6 1 /2" x 23" Sand 30.99 32-1023 6 1 /2" x 23" White 30.99 32-581023 6 1 /2" x 23" Yellow 30.99 32-41028 8 1 /2" x 27" Blue 52.99 32-571028 8 1 /2" x 27" Navy Blue 52.99 32-1028 8 1 /2" x 27" White 52.99 32-41024 10 1 /2" x 30" Blue 70.99 32-1024 10 1 /2" x 30" White 70.99 BIG B INFLATABLE VINYL FENDER These fenders feature a tubular center for end-to-end line passage. Ribbed sides. Built-in bi-valve allows you to inflate the fenders to any desired hardness. Can be hung vertically or horizontally. Extra soft, tough and shiny. SUPER GARD INFLATABLE VINYL FENDER Double molded black ends for added strength, seamless one piece molded construction, and molded-in rib construction. Size Color Boat Size 32-952520 5 1 /2" x 20" Black To 20' 24.99 32-957520 5 1 /2" x 20" Navy Blue To 20' 24.99 32-950520 5 1 /2" x 20" White To 20' 24.99 32-952622 6 1 /2" x 22" Black 20-25' 40.99 32-957622 6 1 /2" x 22" Navy Blue 20-25' 40.99 32-960622 6 1 /2" x 22" Sand 20-25' 40.99 32-950622 6 1 /2" x 22" White 20-25' 40.99 32-952824 8 1 /2" x 26" Black 25-35' 70.99 32-957824 8 1 /2" x 26" Navy Blue 25-35' 70.99 32-960824 8 1 /2" x 26" Sand 25-35' 70.99 32-950824 8 1 /2" x 26" White 25-35' 70.99 32-952128 10 1 /2" x 30" Black 35-50' 90.99 32-957128 10 1 /2" x 30" Navy Blue 35-50' 90.99 32-950128 10 1 /2" x 30" White 35-50' 90.99 STAINLESS STEEL FENDER RACK A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks accommodates 7 /8 rail and stanchion system, Tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.holds Big B and Hull Gard fenders effectively. Folds flat for easy storage. Holds Fits 32-2009 2 fenders 7"-9" fenders 170.99 32-2011 2 fenders 9"-11" fenders 200.99 TRADITIONAL FENDER BOOTS Size Color 32-71025 6" x 15" Black 38.99 32-1025 6" x 15" White 38.99 32-71026 8" x 20" Black 53.99 32-1026 8" x 20" White 53.99 32-71032 10" x 26" Black 90.99 32-1032 10" x 26" White 90.99 32-71034 12" x 34" Black 130.99 32-1034 12" x 34" White 130.99 Smooth polyester fabric resists picking up dirt and grit. Neoprene sewn into the hem keeps the boot on the fender. Sold in pairs. Fits Color Pack / PK 32-5043 8" x 20" & 8 1 /2" x 27" Black 2 24.99 32-5003 8" x 20" & 8 1 /2" x 27" Blue 2 24.99 32-5044 10" x 26" & 10 1 /2" x 30" Black 2 28.99 32-5004 10" x 26" & 10 1 /2" x 30" Blue 2 28.99 PONTOON FENDER LOW FREEBOARD FENDER Marine grade, UV resistant vinyl with integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. Description Color Size 32-31030 Pontoon Fender White 9"W x 16"L 43.99 Shaped to protect the gunwales and rubrail. Inflation valve for air pressure adjustment. Can be tied over the cleat to position it higher on the boat, putting protection where its needed. Size Color 32-31006 5" x 14" Metallic Black 25.99 32-31005 5" x 14" White 25.99
22 Back to FC FENDERS G SERIES FENDER HTM SERIES FENDER Designed for use by trailered boats and permanent protected moorings. Even wall thickness for maximum strength Molded in ribs for strength and abrasion resistance Reinforced rope holds Unique Polyform valve for years of service Size Color Boat Size 218-G2BLK 4 1 /2" x 16" Black 10-20' 16.99 218-G2B 4 1 /2" x 16" Blue 10-20' 16.99 218-G2W 4 1 /2" x 16" White 10-20' 16.99 218-G3BLK 5 1 /2" x 20" Black 15-25' 19.99 218-G3B 5 1 /2" x 20" Blue 15-25' 19.99 218-G3CB 5 1 /2" x 20" Cobalt Blue 15-25' 19.99 218-G3BURG 5 1 /2" x 20" Burgundy 15-25' 19.99 218-G3FG 5 1 /2" x 20" Forest Green 15-25' 19.99 218-G3CR 5 1 /2" x 20" Classic Red 15-25' 19.99 218-G3S 5 1 /2" x 20" Sand 15-25' 19.99 218-G3W 5 1 /2" x 20" White 15-25' 19.99 218-G4BLK 6 1 /2" x 23" Black 20-30' 27.99 218-G4B 6 1 /2" x 23" Blue 20-30' 27.99 218-G4CB 6 1 /2" x 23" Cobalt Blue 20-30' 27.99 218-G4BURG 6 1 /2" x 23" Burgundy 20-30' 27.99 218-G4FG 6 1 /2" x 23" Forest Green 20-30' 27.99 218-G4S 6 1 /2" x 23" Sand 20-30' 27.99 218-G4W 6 1 /2" x 23" White 20-30' 27.99 218-G5BLK 8 1 /2" x 27" Black 25-40' 52.99 218-G5B 8 1 /2" x 27" Blue 25-40' 52.99 218-G5S 8 1 /2" x 27" Sand 25-40' 52.99 218-G5W 8 1 /2" x 27" White 25-40' 52.99 218-G6BLK 10 1 /2" x 30" Black 35 and Over' 70.99 218-G6B 10 1 /2" x 30" Blue 35 and Over' 70.99 218-G6W 10 1 /2" x 30" White 35 and Over' 70.99 Designed for use in medium duty applications in both permanent protected and unprotected moorings. Fenders have a hole through the middle to pass a line through. Even wall thickness for maximum strength Molded in ribs for strength and abrasion resistance Reinforced tube ends Unique Polyform valve for years of service Size Color Boat Size 218-HTM1BLK 6" x 15" Black Up to 30' 38.99 218-HTM1B 6" x 15" Blue Up to 30' 38.99 218-HTM1W 6" x 15" White Up to 30' 38.99 218-HTM2BLK 8" x 20" Black 25'-45' 50.99 218-HTM2B 8" x 20" Blue 25'-45' 50.99 218-HTM2CB 8" x 20" Cobalt Blue 25'-40' 50.99 218-HTM2W 8" x 20" White 25'-45' 50.99 218-HTM3BLK 10" x 26" Black 40'-60' 90.99 218-HTM3B 10" x 26" Blue 40'-60' 90.99 218-HTM3CB 10" x 26" Cobalt Blue 40'-60' 90.99 218-HTM3W 10" x 26" White 40'-60' 90.99 218-HTM4BLK 12" x 34" Black 50' and Over 138.99 218-HTM4W 12" x 34" White 50' and Over 138.99 "A" SERIES BUOY An excellent rafting fender choice. Even wall thickness for maximum strength. Redesigned rope hold for A-1 through A-3 for improved strength and durability. Features Polyform s unique vinyl valve system. S= the diameter of the shackle itself A= the width of the throat of the shackle B= the diameter of the shackle pin C= the distance from bottom of the pin to the inside bottom of the 'U' on the shackle N/A= "Not Applicable means that no standard shackle will fit these buoys Size Color Eye S A B C 218-A1R 11" dia. x 15" L Red 1" 7 /8" 1.438" 1" 3.313" 39.99 218-A1W 11" dia. x 15" L White 1" 7 /8" 1.438" 1" 3.313" 39.99 218-A2R 14 1 /2" dia. x 19 1 /2" L Red 1 1 /8" dia. 1" 1.688" 1 1 /8"3 3 /4" 50.99 218-A2W 14 1 /2" dia. x 19 1 /2" L White 1 1 /8" dia. 1" 1.688" 1 1 /8"3 3 /4" 50.99 218-A3R 17" dia. x 23" L Red 1 1 /8" dia. N/A N/A N/A N/A 67.99 218-A3W 17" dia. x 23" L White 1 1 /8" dia. N/A N/A N/A N/A 67.99
23 FENDER ACCESSORIES TRUE-FIT FENDER HOLDER ELITE FENDER COVER TFR2802 Made of stainless steel and fits most popular fender sizes. The fender holders and two styles of connectors are sold separately, so you can custom configure your fender storage system without having to buy extra hardware you won t be using. TFR402 Premium grade polyester yarn, resistant to abrasion and UV exposure, will keep colors fast. Resists water absorption, keeping fenders lighter when wet. Seamless tube with no seams to split. Fully washable and custom fit. Tough 1 /4" drawstrings. Fits Color 218-EFC1BLK G-3,G-4, HTM-1, F-1 Black 29.99 218-EFC2BLK G-5, HTM-2, F-2, NF-5 Black 35.99 218-EFC3BLK HTM-3, G-6 Black 38.99 218-EFC4BLK HTM-4 Black 42.99 TFR403 Dia. Holds Fits Qty / BX 218-TFR2302 9" 2 fenders F2, F3, G5, HTM2 Kit 190.99 218-TFR2802 12" 2 fenders F5, F6, G6, HTM3 Kit 207.99 218-TFR360 14" 1 fender HTM-4 Ea. 80.99 218-TFR402 Swivel Connector fits 7 /8" to 1" rail Ea. 19.99 218-TFR403 Parallel Connector Pr. 2/cd 19.99 218-TFR404 Swivel Connector fits 1 1 /8" to 1 1 /4" rail Ea. 19.99 a WELL-BUILT product TRUMPS a WARRANTY VE Lifetime warranties don t guarantee performance they just guarantee a new fender. Trust Polyform for guaranteed per performance and be free of warranty claims. SAVE BIG on all G and HTM fenders
24 AUTOMATIC FENDER ADJUSTER FENDER ADJUSTERS TIDY-UPS FENDER ADJUSTER For Use with Wooden Rails and Pipe Rails Makes placing fenders easy. Eliminates tying/untying fender lines. Instant self locking action works automatically to raise and lower the fender and hold it securely in place. White vinyl strap w/stainless steel hardware. Snaps around rails. Accommodates up to 1 /2" diameter line. 50-79101 16.99 FENDER TENDER II Vinyl fender adjusters simply snap over lifelines or railings and are ready to use. Holds line up to 5 /8" in diameter. Fits Color 32-1016 Standard Rail Black 15.99 32-1017 Standard Rail Blue 15.99 32-1015 Standard Rail White 15.99 PONTOON RAIL FENDER ADJUSTER Clips fenders to rails, lifelines, side wing windows or cleats. Railing lock firmly grasps rails from 7 /8" to 1". Lifeline lock provides added safety for 1 /4" to 3 /8" nylon line. Made of tough, sun-resistant plastic. Pack / PK 166-393 1 pair 10.99 A fender adjuster designed specifically for the 1 square tube rails of pontoon boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Made from quality marine grade components -simple height adjustment for lines up to 3 /8". Description Pack / PK 32-1139 Fender adjuster for square tube 4 18.99 DOCK GUARDS & BUMPERS DOCK PRO MEDIUM EDGE GARD DOCK PRO COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING Made with 85% recycled material Made with 85% recycled material Heavy duty double molded vinyl dock edging. Length Size 32-46096 10' Coil 3 13 /16"H x 1 7 /8" W 30.99 32-46098 25' Coil 3 13 /16"H x 1 7 /8" W 70.99 DOCK PRO C-SHAPE GARD Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection. Length Size 32-46030 Side Gard 10' Straight - 3 1 /2" x 1 3 /8" 37.99 32-46032 P-Shape 10' Straight - 3 5 /8" x 2 3 /8" 30.99 90 DEGREE VINYL CORNER BUMPER Side Gard P-Shape White. Length Size 32-46070 8' Straight 3 5 /8" H x 1 1 /2" W 23.99 DOCK PRO VINYL DOCK BUMPERS 90 corner (outside). Inside structural ribs provide impact resistance. Flush fit side sections give finished appearance. Extrusions fit flush with 90 cut. Inside dimensions cover 6 each side. Size Color 32-46015 6" x 6" Corners White 15.99 POST BUMPER Protects the side and the top of the dock with a 1 1 /4 cushion above dock level. Made from the same tough marine grade vinyl. Superior cushioning. White. Mount Size 32-46082 Straight 18" 17.99 32-46081 Corner 10" x 10" 16.99 46082 46081 Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1 1 /2" dock pipe. Color 32-45600 White 26.99
25 DOCK GUARDS & BUMPERS ULTRAGARD Marine grade vinyl material. Molded-in ribs on the interior ensures that it is durable, will not collapse, yet is also very soft. Size Color 686-1008F 35" L x 2 1 /2" W x 5" H White 34.99 PROTECT BUMPER Heavy duty. PVC with UV Inhibitors and fungicides, have excellent shock absorption qualities and will not mark or mar the boat s hull. Straight Corner Mount Size Color 686-1058F Straight 12" x 2 1 /2" x 1 1 /2" White 15.99 686-1059F Corner 15" x 2 1 /2" x 1 1 /2" White 17.99 PUTTY FOAM INTERLOCK DOCKUSHION Soft expanded polypropylene core surrounded by integral skin foam, creating a soft and durable bumper. Marine plywood backer allows for a strong, secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. End caps and corners complete the system. Description Size Color 686-1150F DocKushion Large 48"L x 2" x 4" White 66.99 INFLATABLE DOCK WHEEL Smooth rolling wheel. Molded-in valves to adjust the level of firmness. Heavyduty, hot dipped galvanized hardware mounts securely to the dock. "C" GUARD PVC PROFILE Heavy-duty, economy C Shape co-extruded profile. Marine grade PVC with UV inhibitors. Won t crack or distort with temperature extremes. Use on flat surfaces or pilings. Easy to install 10' coil. Length Color / BX 686-1132F 10' roll White 28.99 DOCK GUARD PVC PROFILE Heavy Duty. The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats. Mount Size Color 686-95072F Corner 12" White 136.99 MOUNTING SCREWS FOR DOCK PROFILES Stainless steel will prevent unsightly staining caused by rusting of regular steel fasteners. Oversized head eliminates need for washers. Recommended for use with all profiles. Comes with square head driver. Bag / BG 686-1006F 100 27.99 Length Cplor 686-1136F 10' roll White 28.99 "D" PVC PROFILE Heavy-duty. Without a lip can mount vertically or horizontally anywhere on the dock face. Great for pilings. Length Color 686-1190F 16' Roll White 66.99 HEAVY DUTY PILING BUMPER These premium grade PVC piling bumpers can be mounted on a curved or flat surface. Internal strengthening ribs protect your boat and rub rail from damage and molded-in UV inhibitors and fungicides keep it looking good. Size Color 686-1020F 5.75" W x 3" D x 6' L White 71.99 CORNER BUMPER Heavy duty air-filled bumper. Marine grade PVC. Built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide. Stainless steel mounting screws included. White. Size Color / PK 686-10571F 9" x 9" x 3 5 /8" White 37.99
26 MOORING WHIPS BOATGUARD MOORING WHIP MOORING WHIP Protects boat in higher wake areas providing "safety zone" between dock and boat. Designed for freshwater use, low lake area and non-tidal regions. Large diameter solid fiberglass poles that withstand rugged environments and provide spring action to keep boat safely away from the dock. Whip base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation. Length Max Wt. / BX 32-99079 8' 2500 lbs. 255.99 32-99080 12' 5000 lbs. 365.99 Fiberglass poles, aluminum magnesium base units, tips and mooring whip lines. All hardware necessary included. Standard whips (MW) have fixed bases. Premium whips (PMW) have rocker arm bases and are designed for saltwater use, large tidal areas and are ideal for large boats. Unconditional non prorated five year guarantee. 1 pair/box. Length Boat Size Max Wt. / BX Standard 32-MW120 12' 18 to 23' 2500 to 5000 lbs. 509.99 32-MW140 14' 24 to 28' 5000 to 10,000 lbs. 559.99 Premium 32-PMW1400 14' Up to 33' 20,000 lbs. 739.99 HOWELL ECONOMY MOORING WHIP ULTIMATE MOORING WHIP 3450F 3100F Fixed Base These fiberglass whips are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of a solid, fiberglass rod, durable cast aluminum bases with a tough 3 /8 thick mounting footprint and molded-in cleat and ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a unique tip with functional roller to allow easier access to your boat. Great for PWC's also. Sold as pair. Size Capacity / BX 686-3100F 8' (Pr.) 2,000 lbs. 205.99 686-3120F 12' (Pr.) 4,000 lbs. 330.99 Rocker base Manufactured from the same materials and to the same quality standards of the Premium Whips, these Ultimate Whips include rocker bases to compensate for most tidal fluctuations and to clear flying bridges and towers when not in use. Each whip set includes a pair of whips, rocker bases, whip and spring lines and one handed line tensioners. Easy set-up. Sold as pair. Size Maximum Weight / BX 686-3450F 12' (Pr.) 5,000 lbs. 600.99 686-3650F 14' (Pr.) 10,000 lbs. 625.99 686-3850F 16' (Pr.) 20,000 lbs. 660.99 PREMIUM MOORING WHIP Ideal for protecting boats up to 33 in non-tidal areas from damage caused by wind and wake. These fiberglass whips act as a spring to maintain your boat at a safe convenient distance from your dock. Manufactured from solid fiberglass rod and wrapped in three additional multistage, cross wound fiber layers Impervious to UV degradation, cold or heat Unique line tensioner for easy, one handed operation Complete set of two Premium Mooring Whips Mounting hardware and spring lines included Sold as pair Length Boat Size Max Load / BX 686-3200F 8' 18' 2500 lbs. 260.99 686-3400F 12' 23' 5000 lbs. 400.99 686-3600F 14' 28' 10,000 lbs. 470.99 686-3800F 16' 33' 20,000 lbs. 489.99 Fixed Base Roller Tip
27 KEEL PROTECTION KEELGUARD FREE Scuffbuster Bowguard Included - $20 Value! Save your boat from grinding sand, abrasive rocks and concrete ramps. Each KeelGuard comes with easy instructions, and no special tools are required. Includes: 3M primer & adhesive, etching pad, burnishing tool, DVD installation guide, and instructions. Ultra tough Polymer composite Hydrodynamic drag reduction channels Increases the value of your boat Eliminates costly repairs Lifetime no-hassle warranty Color Length Boat Size 254-20106 White 6' 17' to 18' 150.99 254-20206 Black 6' 17' to 18' 150.99 254-20506 Gray 6' 17' to 18' 150.99 254-20107 White 7' 19' to 20' 165.99 254-20207 Black 7' 19' to 20' 165.99 254-20507 Gray 7' 19' to 20' 165.99 254-20108 White 8' 21' to 22' 180.99 254-20208 Black 8' 21' to 22' 180.99 254-20508 Gray 8' 21' to 22' 180.99 FLIP UP DOCK CLEAT DOCK CLEATS Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white White Almag polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean Polished grey matte finish. Each cleat is designed with an extra wide footprint for added strength. Color Length Base 686-2606PF Polished 6" 7 1 /2" x 7" x 3 /4" 25.99 686-2608PF Polished 8" 13" x 7" x 1" 39.99 686-2606WF White 6" 7 1 /2" x 7" x 3 /4" 25.99 686-2608WF White 8" 13" x 7" x 1" 39.99 CAST ALUMINUM "S" CLEAT These cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted. Size 686-2409F 9" 19.99 686-2413F 13" 47.99 OPEN BASE DOCK CLEAT Galvanized Gray Iron Hot dipped. Suitable for work boats, seawalls and dock use. Size Fastener 50-30580 4" #10 1.99 50-30600 6" 5 /16" 2.49 50-30610 8" 3 /8" 3.99 50-30620 10" 7 /16" 5.99 50-30630 12" 7 /16" 10.99
28 DOCK LIGHTING SOLAR DOCK AND DECK LIGHT SOLAR SENTINEL The wireless solar DockLite is easy to install. It's durable, weatherproof low profile construction makes it an attractive and functional addition to docks, walkways, decks and landings. Ideal for illuminating trouble spots on pathways or transition areas such as from dock to shore. With extended duty solar charged batteries the DockLite will last until sunrise. Automatic on-at-dusk. 686-96255F 30.99 The Solar Sentinel is a solar station. Each Solar Sentinel incorporates stylish, durable solar lighting on an attractive, broad-based, tapered pillar to illuminate areas. It is also capable of acting as a life ring station with the addition of J hook ring holder. The Solar Sentinel includes solar light, tapered pillar and rechargeable batteries. SOLAR PRO DOCKLIGHT Automatic On at dusk/off at dawn. Heavy duty construction and style. Durable and weatherproof. Perfect for docks, walkways, decks and landings. Replaceable batteries. 686-96257F 34.99 SOLAR COMPARTMENT LIGHT Solar powered light is ideal for dock boxes or any compartment you want to brighten up. Includes a remote mount solar panel for charging and 4 bright white LEDs. Installs in minutes and has a weatherproof seal. Automatically turns on when the lid is opened beyond 60. Size 686-96270F 5.5"W x 2.2"W x 1.85"H 44.99 Height 686-96252F 35" 125.99 SOLAR DOCK LIGHT WITH STAINLESS STEEL CLEAT Solar light is mounted on top of a sturdy galvanized steel base, housed inside an attractive, Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. Will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes: pillar, stainless steel cleat, galvanized mounting base, solar light and rechargeable batteries. Size 686-96250F 4" W x 4" D x 12" H 94.99 SOLAR CLEAT SOLAR PILING CAP LIGHT These piling cap lights automatically come on at dusk, turn off at dawn, and provide 360 illumination for your boat or just dock safety at night. They are completely waterproof, made of durable UV resistant ABS and have a wildlife deterrent spike on top so they will look good for years. Installs easily in minutes and includes a rechargeable AAA Ni-Cad battery. Size 686-96268F 7.3" H x 4.5" Dia. 36.99 96268F Attractive and functional with solar charging performance and mooring strength Cast Aluminum Alloy Chassis Wide, sturdy base footprint 5 Super Bright white LEDs for side and base illumination Polycarbonate side lenses Rechargeable, replaceable AAA (Ni-MH) battery Waterproof to standard IP65 Up to 12 hours illumination from a single charge Automatic On-At-Dusk Viewing distance up to 325' Size 686-96288F 10" W x 3 7 /8" D x 3" H 34.99 DOCK STEPS STEP-SAFE DOCK STEP BOARDING BUDDY Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1 1 /2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately. Description Size 32-47100 Single Tread Step 22 1 /4" D x 18 1 /2" W x 11" H 97.99 32-47200 Double Tread Step 26 11 /16" D x 23 3 /4" W x 16 15 /16" H 152.99 32-47300 Triple Tread Step 35 1 /8" D x 25" W x 25 1 /2" H 213.99 Safe, convenient access on and off a boat or dock. Ideal for any platform to help prevent accidents. Sturdy 1 1 /2" tubing features a textured, high gloss powder coated finish. Simple lag or thru-bolt installation. Size 686-90800F 36" 94.99
29 icart DOCK CARTS STOW N GO KART A rugged and useful addition to your dock arsenal. Powder coated steel frame Convenient, removable heavy-wall (6.24 cubic ft) poly bucket Load capacity up to 300 lbs. E-Z-Roll inflatable pneumatic tires easily traverse the most irregular surfaces Quick and simple assembly Size 686-90600F 52"L x 25"W x 32.5"H 138.99 SMARTCART Detachable handle molded in on both ends with an adjustable length Aluminum Frame - Light weight yet durable. Maximum load capacity up to 250 lbs. Inflatable 10" rubber tires Removable and collapsible basket that's light weight plastic is easy to carry and can be removed from the cart for transfer of gear. Description Size 32-1090 Stow n Go Kart w/basket 22 1 /2" L x 15" W x 11 1 /2" D 110.99 DOCK PRO DOCK CART Attractive, functional, the SmartCart may be your new best friend dockside. Corrosion resistant aluminum Collapsible for quick and easy storage Removable ends for long loads 8.77 cubic ft. bucket - load capacity up to 300 lbs. E-Z-Roll inflatable pneumatic tires easily traverse the most irregular surfaces Minimal assembly required SmartCart collapsed for storage Size 686-90700F 52.5"L x 37"W x 26.5"H 391.99 Made from 50% recycled polyethylene. The easiest way to carry gear from the car to the boat. The curved handle design reduces bending-over, and the unique angled tub provides better leg clearance, making this dock cart easier to handle and maneuver than conventional carts. Features a spacious 7 cu. ft. (47" L x 23" W x 13" D) heavy wall roto-molded poly-tub that will not rust or rot. Zinc coated corrosion resistant hardware used throughout. Plastic rim wheels with roller bearings will stand up to the harshest marine environment. Description Capacity 32-1070 Dock Cart w/ pneumatic wheels 300 lbs. 255.99
30 LADDERS WELDED HEAVY DUTY ALUMINUM FIXED LADDER Ideal for sure-footed access to and from the water or boat with a load capacity of 400 lbs. Perfect for seawalls or dock applications with varying water levels. Distance to first step is 14". Distance between steps is 12". Steps are 15 3 /4''W x 1 3 /4'' D. PONTOON SWIM LADDER Use at pontoon side gate or transom Attaches easily to deck with included Shur-loc catches Vinyl sleeves on verticals protect pontoon Hooks fold flat for storage Durable 1" diameter anodized aluminum tube Comfortable white traction molded poly steps Steps Fixed Ladder 686-2013F 3 180.99 686-2015F 5 230.99 Steps Size 3-15240 4 15'' x 50'' 142.99 BOARDING LADDER Non-anodized aluminum 7 /8" tubing. Polyethylene steps, 11" hooks and support legs. Folds flat for storage. Steps 50-71550 3 36.99 50-71560 4 48.99 REMOVABLE FOLDING PONTOON LADDER Folds down to 4 steps; hooks fold and ladder stows in locker underneath furniture Securing strap included Sturdy design with overrail hooks for easy boarding 1'' Diameter lightweight anodized aluminum Attaches easily to deck at side gate for temporary or permanent mounting with included Shur-Loc catches Comfortable contoured black traction molded steps. DELUXE BOARDING LADDER Ideal for swimming, skiing and emergencies. Floats.Vinyl covered hooks fold flat for easy storage. All aluminum adjustable standoffs for correct fit that fold down when not in use. Comfortable and sturdy white traction molded plastic steps. 7'' Hooks for narrow decks on smaller boats, 11'' Hooks for universal fit on most size gunwales. 05031 05041 Steps Hook Size 3-05031 3 11'' 36" L x 15" W 41.99 3-05041 4 11'' 48" L x 15" W 53.99 YELLOW DOGGY BOAT LADDER Steps Stowed Deployed 3-12350 4 16'' x 30'' 16'' x 43'' 160.99 / PK 3-76000 Shur-Loc Ladder Catches 2 / Pack 18.99 SPORT/DIVER LADDER 76000 With an angled design for easy boarding and a vertical center for use with diving gear. Features oval steps with non-skid surface and quick release mounting bracket with lock for easy stowage. White epoxy powder coated aluminum is completely foam filled so it floats. Mounts easily on transoms and transom platforms with quick release mounting hardware. Rated to 400 lbs. Includes 99193 storage brackets. Steps Size 3-19803 3 38" L x 13" W 240.99 3-19804 4 48" L x 13" W 280.99 Your pet will find it easy to get out of the water and back aboard with this unique boat ramp. You will find it easy to carry, install and store. Portable, lightweight 18 lbs. and durable Easy to attach and remove from any boat ladder with three or more steps Reduces pain and strain for pets and owners Measures 16 x 64", and it folds in half for easy storage Size 223-5200 64" L x 16" W 200.99 BASS BOAT TRANSOM LADDER This compact 2-step, 2 1 /2'' diameter ladder is made of high - tensile aluminum and is ideal for low freeboard transoms for low freeboard transoms. Removable when fishing or underway.comfortable oval steps feature an angled, stair-like design and a non-skid surface. Mounting bracket & SS hardware included. Size 3-19812 28" L x 13" W 200.99
31 LADDERS SPORT/DIVER BOARDING LADDER All stainless steel construction, rated at 400 lbs. Features 1 3 /4" thick-walled tubing. Divers will appreciate the center bar design and comfortable angel for easy ascent. Wrap-around PVC treads provide maximum foot comfort. Includes DLB3 mounting bracket with w/lock pin for positive lock and quick-release. Electropolished corrosion resistant tubing. Manufacturer s unlimited lifetime warranty. Made in the USA. Size 332-DL3X 36" L 174.99 332-DL4X 46" L 200.99 DL3X DL4X REMOVABLE 4 STEP FOLDING PONTOON LADDER Constructed of 1" diameter aluminum tubing and designed for the very simplest, easiest deployment and removal possible. Integrated handles provide strong support to aid climbing. Plastic steps are comfortable and wide for safe, easy climbing. Weighs only 6 lbs. and it floats. Steps Stowed Deployed 332-FDL4B 4 16'' x 30'' 16'' x 45'' 130.99 UNDER PLATFORM TELESCOPING LADDER Electropolished stainless steel ladder stows under the swim platform. Plastic treads for comfort. Includes quick lock strap. Stowed TELESCOPING TRANSOM MOUNT LADDER Stainless Steel Vertical surface mount Black plastic treads provide a secure stepping area 300 lb. Capacity 71221: Length deployed: 23". Length stowed: 13.5". Overall Width: 13.5". Step Tread: 7.25" x 1.5" 71231: Length deployed: 31". Length stowed: 15". Overall Width: 13.5". Step Tread: 7.25" x 1.5" Steps 50-71221 2 110.99 50-71231 3 130.99 TRANSOM PLATFORM WITH TELESCOPING LADDER High density, White polyethylene with 1" diameter stainless steel wrap around rail. Ladder telescopes down easily, slides up and under platform for stowage. Comfortable flat poly treads. All stainless hardware. 18'' W x 15 1 /2'' D 19536 19546 Description Steps 3-19536 O/B Kit w/ Ladder 2 240.99 3-19546 I/O Kit w/ Ladder 2 240.99 Steps Stowed Deployed 332-UP3X 3 14'' x 21'' 14'' x 39'' 140.99 UNIVERSAL SWIM PLATFORMS WITH TOP MOUNT LADDER Ladder is secured with a Velcro strap when in the stowed position Fiberglass platform Includes hardware for both outboard and inboard/outboard applications Telescoping capability Maintenance-free high 71351 (I/O Configuration) strength platform Black plastic treads provide a secure stepping area All stainless steel hardware included 300 lb. Capacity Platform: 14" L x 18" W 71351 (O/B Configuration) 71281: Length deployed: 21.5". Length stowed: 13.5". Overall Width: 12". Step Tread: 7.25" x 1.5" 71301: Length deployed: 34.5". Length stowed: 15". Overall Width: 12". Step Tread: 7.25" x 1.5" 71321: Length deployed: 46". Length stowed: 15.5". Overall Width: 12". Step Tread: 7.25" x 1.5" Description Steps 50-71351 I/O-O/B Swim Platform 2 220.99 50-71361 I/O-O/B Swim Platform 3 313.99 LADDERS 50-71281 2 90.99 50-71301 3 117.99 50-71321 4 170.99 SWIM PLATFORMS 71281 UNIVERSAL SWIM PLATFORM WITH UNDER MOUNT TELESCOPING LADDER Ladder is secured with a Velcro strap when in the stowed position Fiberglass platform Includes ladder and hardware for both outboard and inboard/outboard applications Telescoping Maintenance-free high strength platform Black plastic treads provide a secure stepping area All stainless steel hardware included 300 lb. Capacity Platform: 14" L x 18" W Ladder Measurements 2 Step: Length deployed: 23". Length stowed: 13.5". Overall Width: 11.25". Step Tread: 7.25" x 1.5" 3 Step: Length deployed: 35". Length stowed: 14". Overall Width: 11.25". Step Tread: 7.25" x 1.5" 71201 (O/B Configuration 71201 (I/O Configuration) Description Steps 50-71201 I/O-O/B Swim Platform 2 241.99 50-71211 I/O-O/B Swim Platform 3 240.99