Manitowoc 000 Product Guide Features 00 m-ton (0 ton) capacity No. 55 750 m-ton (5 ton) Capacity No. 55A with MAX-ER 9 09 mton-m (5,505 ft-kips) Maximum oad Moment withmax-er 97,5 m (30 ) No. 55 9,3 m (90 ) No. 79A uffing Jib on No. 55 7 kw (00 P) engine
Features EPIC Manitowoc s field-proven Electronically Processed Independent Controls (EPIC) system delivers high productivity and precise load control by instantly matching a crane s commands to the crane function. EPIC s microprocessor and sensors also maximize a Manitowoc crane s overall reliability and simplify servicing by pinpointing any problem in the crane s engine, power transmission or other operating systems. In addition, EPIC increases versatility by easily tailoring a Manitowoc crane s operation for specialized applications, with or without attachments. EPIC is a key reason no other crane can match the performance and reliability of Manitowoc. FACT Connectors Manitowoc s patented Fast Aligning Connection Technology (FACT) automatically aligns crane components for fast, easy assembly. Crawler Drive Shafts These eliminate the need to disconnect hydraulic systems for shipment simplifying crawler removal and assembly. ydraulics Our closed-loop system provides a separate hydraulic circuit to power each crane function. The result is truly independent, variable-speed operation of the swing, load hoist, boom hoist and travel functions.
Specifications Outline dimensions 9 Crane assembly 5 Performance data combinations 5 eavy lift boom range / load charts Upper boom point range / load charts 3 Fixed Jib range / load charts 3 uffing jib range / load charts 37 MAX-ER outline dimensions 5 combinations eavy lift boom range / load charts 50 Fix jib range diagram 53 uffing jib range / load charts 5 Manitowoc Crane Care 0 Contents
Specifications Upperworks Engine Cummins Model QSX 5 Diesel, cylinder, 7 kw (00 BP) @ 00 governed RPM. Includes engine block heater (0V), ether starting aid, transmission disconnect clutch for cold weather starting, high silencing muffler, hydraulic oil cooler, radiator and fan. Multiple hydraulic pump drive transmission provides independent power for all machine functions. Two volt maintenance-free batteries, 300 CCA at - C (0 F), volt system and 75 amp alternator. One diesel fuel tank, 00 l (75 gal.), mounted on rear of upperworks, with level indicator in operator s cab. Optional: Cold-weather package with heater for fluids, brake pedals, batteries and computer display. Controls Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc s exclusive EPIC (Electronically Processed Independent Control) system with CAN-BUS technology providing microprocessor driven control logic, pump control, on-board diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated wireless oad Moment Indicator system (MI) offers standard load link for main boom and upper boom point. Function cut-out or warning only operation is selected via the Operator Interface Display on the MI console. Travel and swing alarms are standard. Optional: Anemometer (wind speed indicator). s and jibs are prewired for anemometer. ydraulic System Multiple high-pressure piston pumps, driven by a multi-pump transmission, provide independent closed-loop hydraulic power for the hoisting drums, boom hoist, swing, left crawler and right crawler. ydraulic reservoir has a capacity of l (3 gal.) and is equipped with a breather, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. System includes oil cooler and replaceable, ten-micron absolute full flow filter. All oil is filtered before entering the hydraulic pumps. System kg/cm (psi) lpm (gpm) Main oisting Drum (,000) 77 Main oisting Drum (,000) 77 Whip Drum (,000) 37 (00) oist (,000) 05 (0) Standard Dual Swing Optional Quad Swing ydraulic system also includes pump transmission disconnect and hydraulic oil cooler. Drums Basic machine is equipped with one (No. 55/79A ) or two (No. 55 or No. 55A ), cm (9-/") wide,,5 cm (5-3/") diameter hoist drums, one in the 3,0 m (0') boom insert and one in the boom butt. Each end of each drum is driven by a variable-displacement hydraulic motor through a planetary reduction. Each drum drive is equipped with a bi-directional drum brake. Whip drum is, cm (3-3/") wide and, cm (5-/") diameter, grooved for mm wire rope and driven by a variable-displacement hydraulic motor through a planetary reduction. Drum rotation indicator for each drum is standard. Bolt-on (shell-type), cm (9-/") laggings for mm or 3 mm dia. wire rope for liftcrane applications. Swing System (,000) 30 (0) (,000) 05 (0) eft Crawler (,000) 37 (00) Right Crawler (,000) 37 (00) Mast oist (,000) 37 (00) Optional uffing oist (,000) 05 (0) Bearing adapter-mounted independent swing is powered by a fixed-displacement hydraulic motor
Specifications Model 000 coupled to an internal brake and planetary reduction. Includes Manitowoc Patented swing lock. Two swing drives required for standard machine configuration. Four swing drives required for MAX-ER. Swing system maximum speed:. rpm. Mast oist System Single drum mast hoist mounted in rotating bed is powered by a fixed displacement hydraulic motor and a planetary reduction gear box with internal brake. Ratcheting pawl is standard. Includes mast-hoist wire rope. oist System Independent boom hoist, mounted in the mast butt has grooved drum mm (") wide and 355 mm (53-3/") diameter. Each end of drum is powered by a variabledisplacement hydraulic motor coupled to a planetary reduction gearbox with internal brake. Ratcheting pawl. rotation indicator, pressure roller and wire rope for -part boom hoist line are standard. hoist speed: raise,9 m (00') No. 55/79A main boom from 0 - in minutes, seconds. Raise 97,5 m (30') No. 55 main boom from 0 - in minutes, seconds. Moving Mast Support System Moving mast is 9,m (30') long and connects to the fixed mast suspension rigging. When used with the optional self-erect package, the mast is utilized for crane assembly and disassembly. It is capable of lifting and positioning the crawler assemblies. Fixed Mast Stationary No. 5 lattice mast provides geometry to raise and support all boom lengths. 30,5 m (00') mast standard for basic crane;,7 m (0') mast required for MAX-ER applications. -hoist rope reeved from drum in mast butt through sheaves in mast top and boom-hoist equalizer forms -part boom-hoist rigging. igh-strength steel straps connect equalizer to boom top. Cushioned boom stop and automatic boom stop are standard. Counterweight UNIT WEIGT TOTA WEIGT QTY. ITEM kg lb kg lb Carbody ower Box 9 95,000 9 7,000 Tray 700,000 5 00 5,000 Carbody Total 5 50 30,000 Upperworks Upper Box 5,000 5 50,000 Tray 5 3,000 0,,000 Upperworks Total 39 97 5,000 Includes connecting pins, brackets, and stops. Vision Operator s Cab The Vision Cab is a fully enclosed and insulated steel module mounted to the left front corner of rotating bed. Module is equipped with power tilt, sliding door, large safety glass windows on all sides and roof. Signal horn, power seat, all season climate control package, front and roof windshield wipers, dome light, sun visor and shade, fire extinguisher, swing and travel alarms, and radio/cd player are standard equipment. Operator s station swings over front of rotating bed for transportation. owerworks Carbody Connects rotating bed and crawler frames. Fabricated steel rotating bed lower module mounts to singlepiece carbody by a 3 m (9' 0") diameter triple-row roller bearing turntable. Each crawler frame is mounted to the carbody with FACT connection system power-actuated pins. Crawler drive motors are mounted on carbody, permitting crawler removal without opening travel drive hydraulic circuit. Crawlers Counterweight TOTA 3 7,000 Crawler assemblies are, m (3' 9") long with,5 m (5') wide cast steel crawler pads and lubricated intermediate rollers. Each crawler is powered independently by two variable displacement hydraulic motors and includes two hydraulically powered pin actuators for fast installation and removal from carbody. Carbody mounted drive motors are connected to crawler final reduction via drive shafts. Crawlers provide ample tractive effort allowing counter-rotation with full rated load. Maximum ground speed is, kph (0.7 mph). 5
Specifications Attachments No. 55-79A The liftcrane is equipped with a 3, m (0') No. 55/79A tubular-chord boom consisting of a, m (0') No. 55 or No. 55A butt, 3,0 m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert,, m (0') No. 55/79 transition insert with equalizer platform, and 9, m (30') No. 79A heavy-lift top with sixteen 7 mm (30") diameter roller bearing sheaves on one shaft. Includes rope guides, boom angle indicator, and a 7, t (30 USt) swivel hook and weight ball weighing 70 kgs (,00 lbs) for mm or 3 mm wire rope. The No. 55/79A boom utilizes steel suspension straps and Manitowoc s patented, exclusive FACT connection system. Powered boom hinge system including cylinder, piping, operating controls, and locking device are standard. uffing jib preparation is standard. Optional:, m (0'), and, m (0') No. 79 boom inserts with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with luffing drum sheaves, steel boom suspension straps, and FACT connection system. Optional: Intermediate suspension, required for boom lengths of 09,7 m (30') or more. Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on heavy-lift boom top. (Same upper point used on Models 555, 777, 777T,, M-50, and 50.) Optional: Extended upper boom point on boom 55/79A. Utilize optional boom inserts in combination with the No. 55/79A basic boom for total lengths up to,9 m (00'). No. 55 or No. 55A The liftcrane is equipped with a 3, m (0') No. 55 or No. 55A tubular-chord boom consisting of a, m (0') No. 55 or No. 55A butt, 3,0 m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert,, m (0') No. 55 or No. 55A insert with equalizer platform, and 9, m (30') No. 55 or No. 55A heavy-lift top with sixteen 7 mm (30") diameter roller bearing sheaves on one shaft. Includes rope guides, boom angle indicator, and a 7, mt (30 ton) swivel hook and weight ball weighing 70 kgs (,00 lbs.). The No. 55 or No. 55A boom utilizes steel suspension straps and Manitowoc's patented, exclusive FACT connection system. Powered boom hinge system including cylinder, piping, operating controls, and locking device are standard. uffing jib preparation is standard. Optional:, m (0'),, m (0') No. 55 or No. 55A boom inserts, and, m (0') No. 55 or No. 55A medium boom inserts with steel boom suspension straps, and FACT connection system. Optional:, m (0') No. 55 or No. 55A boom insert with luffing drum sheaves, steel boom suspension straps, and FACT connection system. Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on heavy-lift boom top. (Same upper point used on Models 555, 777, 777T,, M-50, and 50.) Optional: Detachable upper boom point with one 7 mm (30") diameter tapered roller bearing steel sheave with rope guard, for liftcrane use on No. 55 boom top or 79A luffing jib top. Utilize optional boom inserts in combination with the No. 55 or No. 55A basic boom for total lengths up to 97,5 m (30'). No. uffing Jib Optional: Components to make up,3 m (70') basic luffing jib include a, m (0') No. butt, 9, m (30') No. top, 5, m (50') jib strut with 7 sheaves,,3 m (7') main strut with 7 sheaves, jib strut stop, luffing jib stop, main luffing strut backstay straps, basic luffing jib steel rigging straps, combination upper point and luffing jib raising wheel, luffing drum assembly, 95 m (5') luffing drum wire rope, and wire rope guide(s) as required. Optional: 3,0 m (0'),, m (0'), and, m (0') No. inserts with steel boom suspension straps. Utilize optional luffing jib inserts in combination with the No. basic luffing jib for total lengths up to 73, m (0'). Note: Basic luffing jib, m (0') No. boom butt and 9, m (30') No. boom top can be used from 50 liftcrane. uffing jib also uses No. boom inserts and straps from 50 liftcrane for luffing jib lengths greater than,3 m (70').
Specifications No. 79A uffing Jib Optional: Components to make up,3 m (90') basic luffing jib includes a, m (0') No. 79A butt,, m (0') No. 79 insert, 9, m (30') No. 79A top, jib strut, main strut, main jib strut stop, luffing jib stop, main luffing strut backstay straps, basic luffing jib steel rigging straps, upper point, luffing jib raising dolly, luffing drum assembly, luffing drum wire rope, and wire rope guide(s) as required. Optional:, m (0'), and, m (0') No. 79 inserts with steel boom suspension straps, and FACT connection system. Utilize optional luffing jib inserts in combination with the No. 79A basic luffing jib for total lengths up to 9,5 m (30'). Note: Basic luffing jib 9, m (30') No. 79A boom top can be used from No. 55-79A boom. uffing jib also uses No. 79 boom inserts and straps from MAX-ER 000 liftcrane. No. 79A Fixed Jib Optional: Components to make up 5, m (50') basic fixed jib includes a, m (0') No. 79A butt, 9, m (30') No. 79A top, jib strut, backstay straps and jib support straps. Optional:, m (0'), and, m (0') No. 79 inserts with steel boom suspension straps, and FACT connection system. Utilize optional fixed jib inserts in combination with the No. 79A basic fixed jib for total lengths up to 33,5 m (0'). Note: Basic fixed jib 9, m (30') No. 79A boom top can be used from No. 55-79A boom. Fixed jib also uses No. 79 boom inserts and straps from MAX-ER 000 liftcrane. The MAX-ER The MAX-ER attachment components include: One, m (0') No. 5 insert, added to increase the mast length to,7 m (0'). Two additional swing drives (for a total of four) mounted on the rotating module. Each swing drive is powered by a fixed-displacement hydraulic motor coupled to a planetary reduction gearbox and internal brake. A wheeled or hanging MAX-ER counterweight assembly attaches to the top of the mast by steel straps and to the rear of the upperworks by a shearframe and to the top of the moving mast by steel straps for the, m (0') counterweight position. The hanging MAX-ER counterweights is m (59') behind the crane's centerline of rotation, and the wheeled MAX-ER counterweight is, m (0') or m (59') behind the crane's centerline of rotation. The wheeled counterweight uses large off-road tires, which can be positioned for traveling or swinging. It also includes hydraulic support jacks and pads. Optional Equipment Optional: Self-erect system, includes: rotating bed jacking cylinders with pads, wireless controls, 9 t (00 ton) assembly block, crawler handling chains. Optional: Blocks and ooks 7, t (30 USt) swivel hook and weight ball 70 kgs (,00 lb) for mm or 3 mm wire rope. 50 t (75 UST) hook block 3 99 kgs (,750 lbs) with nine 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook with hook latch and swivel lock for mm or 3 mm wire rope. 37 t (350 UST) hook block 79 kgs (7,00 lbs) with nine 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook with hook latch and swivel lock for mm or 3 mm wire rope. 0 t (50USt) hook block 9 kgs (,300 lbs) with thirteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch, and swivel lock. For mm 3 mm wire rope. 50 t (500 USt) hook block 3 kgs (,500 lbs) with fifteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. 00 t (0 USt) hook block 35 kgs (5,00 lbs) with fifteen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. 700 t (770 USt) hook block 97 kgs (,00 lbs) with seventeen 7, cm (30") dia. roller bearing sheaves and duplex roller bearing swivel hook, hook latch and swivel lock for mm or 3 mm wire rope. Model 000 Optional: Preparation for MAX-ER. 7
Specifications Optional: ydraulic Test Kit: required to properlyanalyze the performance of the EPIC control syste m. Optional: Service Interval Kits: for the regularly scheduled maintenance of general crane operations. Optional: ighting Packages: consult Factory for available options. Optional: Special Paint color(s) other than Manitowoc standard red and black. Optional: Custom vinyl decal(s) of customer name and/or logo from artwork supplied by customer. Optional: Export Packaging: basic crane, boom and jib sections. MAX-ER export packaging available.
Outline dimensions 37,5 m (3' ") 3,5 m (' ") 5,07 m (9' 5") 7, m (3' "),57 m (' 7"),0 m (' "),9 m (' 3"),7 m (5' 0"),5 m (5' 0"),07 m (' 0") 3, m (' 5") 5,00 m (' 5") 5, m (7' 0") 0, m (33' ") 9.0 m (9' 7") R 0, m (33' 5") TAISWING 3,00 m (9' 0"), m (3' 9") 5, m (9' ") 5, m (5' 3"),05 m (5' ") Model 000 3, m (' ") 9,5 m (5' 0"),5 m (5' 0")
Outline dimensions iftcrane ength 3,59 m ' " Width 3,00 m 9' 0" eight,9 m ' 0" Weight 7 370 kg 0,3 lb Weight 0 0 kg,335 lb Note: Weight includes rotating bed rear section with pin pullers, counterweight, live mast, mast-hoist with wire rope, maximum hoist and whip lines on drums, Cummins QSX5 powerplant upperworks jacking system, full hydraulic fluid reservoir, and half tank of fuel. Weight is with upperworks jacking system removed. Carbody & Rotating Bed ength 7,9 m 5' " Width 3,00 m 9'0" eight 3,33 m ' 0" Weight 3 99 kg 95,900 lb Note: Weight includes rotating bed adapter frame with bearing turntable, four swing drives, and carbody. Upperworks Jacks x ength 3,9 m 0' 0" Width, m 3' 9" eight 0,3 m ' " Weight kg,05 lb Note: Shown in horizontal, retracted shipping position. Crawlers x ength, m 3' 9" Width,0 m 7' 3" eight,07 m ' 0" Weight 0 03 kg,5 lb W Carbody Counterweight Tray x ength, m ' " Width,39 m 7' 0" eight,30 m ' " Weight 700 kg,000 lb 0 W ower Counterweight x ength,59 m ' " Width 3,5 m ' " eight 0,5 m ' " Weight 9 95 kg,000 lb Option
Outline dimensions Upper Counterweight Tray x ength, m 9' " Width 3, m 0' " eight,3 m 7' 0" Weight 5 5 kg,050 lb W W Upper Counterweight x ength,5 m ' " Width, m ' 7" eight 0, m ' " Weight kg,000 lb No. 5 Mast Butt & Top Package, Drum, Wire Rope, Equalizer x ength 5, m 9' 7" Width 3,00 m 9' 0" eight,79 m 9' " Weight 5 kg 57,75 lb No. 5 Mast Insert, m (0') & Straps x ength,30 m 0' " Width 3,00 m 9' 0" eight,9 m ' " Weight 3 50 kg,90 lb No. 5 Mast Insert, m (0') & Straps x ength,5 m 0' 0" Width 3,00 m 9' 0" eight,9 m ' " Weight 33 kg 3,90 lb No. 55 or No. 55A Butt, m (0') with Drum, Rigging Winch & Wire Rope x ength, m ' 9" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 5 kg 57,75 lb Model 000 Option
Outline dimensions No. 55 or No. 55A Top 9, m (30') x ength 0,09 m 33' " Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 737 kg 37,7 lb No. 55 or No. 55A Insert 3,0 m (0') with Drum & Wire Rope x ength,35 m 0' 0" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight,3 kg 35,90 lb No. 55 or No. 55A Insert, m (0') x ength,35 m 0' 0" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 0 kg 0,75 lb No. 55 or No. 55A Insert, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 3 kg,5 lb No. 55/79A Transition Insert & Straps, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 90 kg 9,0 lb No. 79A Top 9, m (30') x ength 0,05 m 33' 0" Width 3,00 m 9' 0" eight 3,0 m 0' " Weight 5 kg 7,35 lb Option
Outline dimensions No. 79 Insert, m (0') x ength,7 m 0' 7" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight 3 553 kg 7,35 lb No. 79 Insert, m (0') x ength,37 m 0' 7" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight 5 97 kg 3,0 lb No. 79 uffing Jib Butt, m (0') x ength,3 m ' 9" Width 3,00 m 9' 0" eight 3,09 m 0' " Weight 3 57 kg 9, lb No. 79 uffing Jib Main Masts, m (0') x ength,5 m 53' 0" Width,5 m ' 3" eight,3 m 7' 9" Weight 0 5 kg 3,5 lb No. uffing Jib Butt, m (0') x ength,7 m ' " Width 3,00 m 9' 0" eight 3,00 m 9' 0" Weight 5 9 kg,50 lb No. uffing Jib Masts, m (0') x ength,5 m 53' 0" Width,5 m ' 3" eight,3 m 7' 9" Weight 0 5 kg 3,5 lb Model 000 Option 3
Outline dimensions No. Top 9, m (30') & Wire Rope Guide, Straps, ower Point x ength 0,0 m 33' 0" Width,59 m ' " eight,90 m 9' " Weight 5 57 kg,75 lb No. uffing Jib Insert 3,0 m (0') x ength 3.3 m 0' 7" Width,59 m ' " eight,59 m ' " Weight 57 kg,90 lb No. uffing Jib Insert, m (0') x ength, m 0' 7" Width,59 m ' " eight,59 m ' " Weight 5 kg 3,5 lb No. uffing Jib Insert, m (0') x ength,3 m 0' 7" Width,59 m ' " eight,59 m ' " Weight 5 kg 5,0lb No. 79A Fixed Jib Butt, m (0') x ength,5 m ' 5" Width 3,00 m 9' 0" eight 3,0 m 9' " Weight kg 9,0 lb No. 79A Fixed Jib Strut, m (0') x ength 9, m 3' " Width,97 m 9' 9" eight.9 m 9' 7" Weight kg,0 lb Option
Crane assembly Model 000 5
Crane assembly
Crane assembly Model 000 7
Performance data Wire Rope engths - Tandem Drums - mm oist ine No. 55 or No. 55A or and Fixed Jib ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) Drum 3 ( Part of ine) m 9 99 37 5 0 75 3 9 3 Whip ine (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) Drum 3 ( Parts of ine) m 30 5 3 0 3 59 7 97 3 (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) m 579 7 7 53 53 9 975 975 975 975 975 Drum oist ine (ft) (900) (00) (500) (00) (00) (3000) (300) (300) (300) (300) (300) Drum m 579 7 7 53 53 9 975 975 975 975 975 (ft) (900) (00) (500) (00) (00) (3000) (300) (300) (300) (300) (300) Total Parts of ine 0 0 oist Reeving for Main oad Block Two ead ines - mm No. 55 or No. 55A No. Parts of ine 0 Maximum oad kg (lb) 30 0 7,000 95 70 30,500 0 30 57,000 35 500 77,00 390 50,000 55 00,00,00 NOTE: Above hoist line lengths are based on tandem drums both reeved to the main load block. Each drum is dead-ended in main load block reeving. Total parts of line requires using both drums and. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire Rope engths - Single oist Drum - mm oist ine No. 55 or No. 55A ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) m 9 99 37 5 0 75 3 9 3 Part Whip ine - Drum or 3 oist ine - Drum (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) m 30 5 3 0 3 59 7 97 3 Part Maximum Parts of ine For Full (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) m 9 37 3 3 3 3 3 3 3 3 3 (ft) (3900) (500) (00) (00) (00) (00) (00) (00) (00) (00) (00) oisting Range 30 30 0 oist Reeving for Main oad Block Single ead ine - mm No. 55 or No. 55A No. Parts of ine 0 0 Maximum oad kg (lb) 3 50 7,700 5 090 3,500 97 0 5,00 30 0 7,000 750 35,00 95 70 30,500 7 0 50,300 5 000 5,00 7 0 33,700 3 90 97,300 3 550 759,00 37 0 0,700 399 30 0,00 NOTE: Above hoist line lengths are based on single part lead line. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 30 00 939,300 5,00 99,00
Performance data Wire Rope engths - Tandem Drums - 3 mm oist ine No. 55 or No. 55A ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) Drum 3 ( Part of ine) m 9 99 37 5 0 75 3 9 3 Whip ine (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) Drum 3 ( Parts of ine) m 30 5 3 0 3 59 7 97 3 (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) m 579 579 7 7 70 70 70 73 79 79 79 Drum oist ine (ft) (900) (900) (00) (00) (300) (300) (300) (00) (00) (00) (00) Drum m 579 579 7 7 70 70 70 73 79 79 79 (ft) (900) (900) (00) (00) (300) (300) (300) (00) (00) (00) (00) Total Parts of ine 0 0 oist Reeving for Main oad Block Two ead ines - 3 mm No. 55 or No. 55A No. Parts of ine 0 Maximum oad kg (lb) 77 00 390,00 5 0 55,00 35 0 70,00 70 97,000 53 50,7,00 00 000,3,00 NOTE: Above hoist line lengths are based on tandem drums both reeved to the main load block. Each drum is dead-ended in main load block reeving. Total parts of line requires using both drums and. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire Rope engths - Single oist Drum - 3 mm oist ine No. 55 or No. 55A ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) m 9 99 37 5 0 75 3 9 3 Whip ine - Drum or 3 oist ine - Drum Part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) m 30 5 3 0 3 59 7 97 3 Part Maximum Parts of ine For Full (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) NOTE: Above hoist line lengths are based on single part lead line. oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. m (ft) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) oisting Range 0 0 0 oist Reeving for Main oad Block Single ead ine - 3 mm No. 55 or No. 55A No. Parts of ine 0 0 Maximum oad kg (lb) 70 97,00 50 95,00 3 0 9,00 77 00 390,00 350,000 5 0 55,00 309 90 3,00 350 900 773,00 390 950,900 30 90 9,00 50,033,00 50 350,,300 53 70,97,700 579 00,77,500 Model 000 9
Performance data Wire Rope Specifications 5: Safety Factor - 3 mm oist ine - No. 55 or No. 55A Function MCC Part Number Rotation Resistant, Right and ang ay Wire Rope with Spelter Button (except 795) and Pad Eye oist ine (Drum ) A0005 oist or Whip ine (Drum ) A0005 Whip ine (Drum 3) 795 Maximum Spooling Capacities Drum (oist ine) 3 mm Wire Rope* Drum (oist or Whip ine) (3 mm) Wire Rope* Drum 3 (Whip ine) mm Wire Rope 05 m (3,330 ft) 9 ayers 05 m (3,330 ft) 9 ayers 579 m (,900 ft) ayers Size Wire Rope Minimum Breaking Strength Maximum oad Per ine 3 mm 0 0 kg (,000 lb) 3 mm 0 0 kg (,000 lb) 0 kg (,00 lb) mm 370 kg (79,00 lb) 3 0 kg (30,000 lb) *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 Approximate Weight 5.57 kg/m (3.7 lb/ft) 5.57 kg/m (3.7 lb/ft). kg/m (.7 lb/ft) Wire Rope engths - Single oist Drum - mm oist ine No. 55-79A ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30) m 9 99 37 5 0 75 3 9 3 3 Whip ine - Drum or 3 oist ine - Drum Part Part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) (75) (775) (00) m 30 5 3 0 3 59 7 97 3 3 35 3 (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) (075) (50) m 9 37 3 3 3 3 3 3 3 3 3 3 3 3 (ft) (3900) (500) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) (00) Maximum Parts of ine For Full oisting Range 30 30 0 0 0 oist Reeving for Main oad Block Single ead ine - mm No. 55-79A No. Parts of ine 0 0 30 Maximum oad kg (lb) 3 50 7,700 5 090 3,500 97 0 5,00 30 0 7,000 750 35,00 95 70 30,500 7 0 50,300 5 000 5,00 7 0 33,700 3 90 97,300 3 550 759,00 37 0 0,700 399 30 0,00 00 939,300 53 500,000,000,9 (00) 59 (50) 39 (75) 3 (00) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 0
Performance data Wire Rope Specifications 5: Safety Factor - mm No. 55 or No. 55A and No. 55-79A Function MCC Part Number Rotation Resistant, Right and ang ay Wire Rope with Pad Eye oist ine (Drum ) 795 oist or Whip ine (Drum ) 795 Whip ine (Drum 3) 795 Maximum Spooling Capacities Drum (oist ine) mm Wire Rope* Drum (oist or Whip ine) ( mm) Wire Rope* Drum 3 (Whip ine) mm Wire Rope 0 m (,73 ft) ayers 0 m (,73 ft) ayers 579 m (,900 ft) ayers Size Wire Rope Minimum Breaking Strength Maximum oad Per ine Approximate Weight mm 370 kg (79,00 lb). kg/m (.7 lb/ft) mm 370 kg (79,00 lb) 0 kg (35,00 lb). kg/m (.7 lb/ft) mm 370 kg (79,00 lb) 3 0 kg (30,000 lb). kg/m (.7 lb/ft) *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 003 for No. 55 or 55A. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 for No. 55-79A. Drum And agging Chart - iftcrane Application Drum Number and ocation Drum Part Number Drum Type Drum Diameter Drum Width Grooved agging Part Number agging Diameter Minimum Wire Rope Size oist Drum ( Insert) A053 Bare 5 mm (5-3/") mm (9-/") A050 A0505 7 mm (-/") 7 mm (-/") mm 3 mm oist or Whip Drum ( Butt) A053 Bare 5 mm (5-3/") mm (9-/") A050 A0505 7 mm (-/") 7 mm (-/") mm 3 mm Whip Drum 3 (Rotating Bed) A0530 Grooved mm (5-/") mm (3-3/") mm Drum Identification Drum Number Function 3 Main oad Drum Standard Main/Auxiliary oad Drum Standard Whip oist Standard 3 oist Standard 5 Mast oist Standard uffing Jib Drum Optional 7 Rigging Winch Optional (not shown, located in Butt) 5 Model 000
Performance data Wire Rope engths - Single oist Drum - 3 mm oist ine No. 55-79A ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) m 9 99 37 5 0 75 3 9 3 3 59 Whip ine - Drum or 3 oist ine - Drum Part (ft) (35) (375) (00) (50) (500) (55) (575) (00) (50) (700) (75) (775) (00) (50) m 30 5 3 0 3 59 7 97 3 3 35 3 39 Part Maximum Parts of ine For Full (ft) (5) (75) (550) (00) (75) (75) (775) (50) (900) (975) (05) (075) (50) (75) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. m 03 07 097 097 097 (ft) (900) (3500) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) (3700) Wire Rope Specifications 5: Safety Factor - 3 mm oist ine - No. 55-79A Function MCC Part Number oisting Range 0 0 0 0 Rotation Resistant, Right and ang ay Wire Rope with Spelter Button (except 795) and Pad Eye oist ine (Drum ) A0005 oist or Whip ine (Drum ) A0005 Whip ine (Drum 3) 795 oist Reeving for Main oad Block Single ead ine - 3 mm No. 55-79A No. Parts of ine 0 0 Working Weight 30,5 m (00') No. 5 Mast with 3, m (0') No. 55 or No. 55A Main, Upper Point, t (00 USt) hook block. 30,5 m (00') No. 5 Mast with 3, m (0') No. 55/79A Main Upper Point, 5 t (500 USt) hook block. Maximum oad kg (lb) 70 97,00 50 95,00 3 0 9,00 77 00 390,00 350,000 5 0 55,00 309 90 3,00 350 900 773,00 390 950,900 30 90 9,00 53 500,000,000 kg (lb) (,53,70) 70 3 (,7,930) Typical working weight includes hydraulic reservoir full, fuel half-full, drums with standard lengths of wire rope, upper boom point and 7 t (30 USt) hook and weight ball. Size Wire Rope Minimum Breaking Strength Maximum oad Per ine Approximate Weight Maximum Spooling Capacities Drum (oist ine) 3 mm Wire Rope* Drum (Whip ine) 3 mm Wire Rope* Drum 3 (Whip ine) mm Wire Rope 3 mm 0 0 kg (,000 lb) 5.57 kg/m (3.7 lb/ft) 05 m (3,330 ft) 9 ayers 05 m (3,330 ft) 9 ayers 579 m (,900 ft) ayers 3 mm 0 0 kg (,000 lb) 0 kg (,00 lb) 5.57 kg/m (3.7 lb/ft) mm 370 kg (79,00 lb) 3 0 kg (30,000 lb). kg/m (.7 lb/ft) oist Reeving for Jib oad Block Single ead ine - mm No. 55-79A and No. 55* or No. 55A* No. Parts of ine 0 Maximum oad kg (lb) 3 50 7,700 5 090 3,500 97 0 5,00 30 0 7,000 750 5,00 93 0,00 3 0 9,00 *7 m (3 ft) is deducted from maximum spooling capacities for 3 dead wraps per drum. Refer to Drum and agging Chart No. 5-A and oad Block Reeving Folio No. 03 * 350 900 55,00 50* 7,00* 0* 95 000* 50,00* * Only for No. 55 or No. 55A with fixed jib 79A
Performance data Wire Rope engths - mm oist ine iftcrane - uffing Jib No. on No. 55-79A ength iffing Jib ength,0 (0) 7, 70, (30) 73, (0) 7, (50) 79, (0) 73, (70) 79, (0) 5,3 (90) 9, 9,5 (30) 97,5 (30) 00, (330) 03, (30) 0,7 (350) 09,7 (30), (370) 5, (30),9 (390),9 (00) 5,0 (0),0 (0) 3, (30) 3, (0) 37, (50) 0, (0) 3,3 (70),3 (0) 9, (90) 5, (500) 55,5 (50) 5,5 (50) Whip ine - Drum or 3 Part (0) 5 (500) 5 (50) 5 (50) 7 (50) 77 (50) 3 (00) 9 (0) 95 (0) 0 (0) 07 (0) 3 (700) 9 (70) (70) 3 (70) 3 (70) (00) 50 (0) 5 (0) (0) (0) 7 (900) 0 (90) 7 (90) 93 (90) 99 (90) 305 (000) 3 (00) 37 (00) 33 (00) 39 (00) 335 (00) Part (75) 9 (750) 3 (775) 5 (5) 59 (50) 7 (75) 7 (900) (95) 90 (950) 305 (000) 3 (05) 30 (050) 3 (075) 335 (00) 33 (5) 35 (75) 3 373 (5) 3 (50) 39 (75) 0 (35) (350) 9 (375) 7 (00) 3 (5) (50) 57 (500) 5 (55) 7 (550) 0 (575) (00) 95 (5) NOTE: Whip line lengths given in table will allow hook to touch ground. When hook travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire Rope engths - mm oist ine iftcrane - uffing Jib No. on No. 55-79A oist ine Drum Wire 0 m (,00 ft) uffing Jib,3 (70), (0) 7, (90) 30,5 (00) 33,5 (0) 3, (0) 39, (30),7 (0) 5,7 (50), (0) 5, (70) 5,9 (0) 57,9 (90),0,0 (0) 7, 70, (30) 73, (0),7 (0) Wire Rope engths - Single oist Drum - mm oist ine iftcrane - Fixed Jib No. 79A on No. 55 or No. 55A oist ine - Drum ength m (ft), (0) 5,9 (0),0 7, (90) 33,5 (0) 39, (30) 5,7 (50) 5, (70) 0 0 0 57,9 (90) 0 0 0 NOTE: Above hoist line lengths are based on single part lead line. 0 0 0, (0) 0 0 0 ength 5,9 (0) 0 0 0 0,0 0 0 0 7, 0 0 0 73, (0) 0 0 0 79, (0) 0 0 5, (0) NOTE: Whip line lengths given in table will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. Wire Rope engths - Single oist Drum mm oist ine iftcrane - Fixed Jib No. 79A on No. 55 or No. 55A ength Maximum Parts of ine oist ine Jib ength Drum,0 (0) 0 70, (30) 5, (50) oist ine - Drum Maximum Parts of ine 7, (50) Jib ength,3 (70) 7, (90) 33,5 (0),3 (70), (90) 9,5 (30) 3 3 (00) 33 (700) oist ine Drum Whip ine Drum or 3 Part Part,7 (0) 0 50 (00) 75 (575) 5 (5), (0) 5,9 (0),0 7, 50 (00) 3 (00) 3 (00) 9 (50) 3 (00) 9 (50) 0 (00) 9 (50) 7 (900) 90 (950) 90 (950) 90 (950) NOTE: oist and whip line lengths will allow hook to touch ground. When block travel below ground is required, add additional rope equal to parts of the line times the added travel distance. oisting distance or line pull may be limited when block travel below ground is required. 3
Performance data Performance for Main oist (Drum #) and also Auxiliary oist (Drum #) mm Wire Rope - ayers Maximum Working - agging Groove Root Diameter.5 " Single ine Speed in per Minute ayer Single ine Pull Single ine Pull kg (lb) 0 (0) 53 (0,000) 9 07 (0,000) 3 07 (30,000) 39 (35,00) 37 mm (.") 9 (309) 90 (95) 5 (0) () 75 (7) 399 mm (5.7") 0 (333) 9 (3) 9 (99) (3) 77 (5) 3 7 mm (.") 09 (35) 03 (337) 97 (3) 9 (93) 7 (5) 55 mm (7.9") (379) 09 (35) 03 (33) 9 (97) 0 () 5 3 mm (9.0") 3 (0) 5 (37) 0 (35) 9 (30) (5) 5 mm (0.") 30 () (399) 3 (37) 93 (30) (70) 7 53 mm (.") 37 (9) (9) 9 (39) 95 (3) (7) 5 mm (.3") (7) 3 (39) 3 (05) 9 (35) 5 (79) 9 59 mm (3.") 5 (9) 0 (59) 9 () 9 (30) (3) 0 5 mm (.") 5 (59) (79) 33 (3) 99 (3) () 50 mm (5.") 5 (5) 5 (9) 3 () 00 (39) 9 (9) Performance for Main oist (Drum #) and also Auxiliary oist (Drum #) 3 mm Wire Rope - 9 ayers Maximum Working - agging Groove Root Diameter.5 Single ine Speed in per Minute ayer 3 5 7 9 Single ine Pull Single ine Pull kg (lb) 37 mm (.") 0 mm (.0") 37 mm (7.") 70 mm (.5") 500 mm (9.7") 533 mm (.0") 5 mm (.3") 570 mm (3.5") 30 mm (.") 0 (0) 95 (3) 03 (33) (3) 9 (39) 7 (7) 35 () (7) 5 (97) 0 (5) 53 (0,000) 90 (9) 9 (30) 05 (3) (3) 9 (39) (5) 3 (3) 0 (0) 7 (3) 9 07 (0,000) () 9 (303) 99 (3) 05 (35) (35) 7 (35) 3 (0) 9 (3) 33 (37) 3 07 (30,000) (7) 7 () 90 (9) 9 (99) 93 (305) 9 (30) 9 (35) 9 (30) 99 (35) (0,000) 9 () 7 (33) 73 (3) 7 (3) 7 () 77 (5) 79 (59) 0 () 7 (5) 35 (,00) (99) (03) 3 (0) 5 (3) 7 () (3) 9 () 7 (3) 73 (39) Performance for Whip (Drum #3) - mm Wire Rope ayers Maximum Working - Drum Barrel Groove Root Diameter 5.5 " Single ine Speed in per Minute ayer Single ine Pull Single ine Pull kg (lb) 335 mm (3.") 33 mm (.3") 3 39 mm (5.") 9 mm (.5") 5 7 mm (7.") 0 mm (.") 7 503 mm (9.") 53 mm (0.9") 0 (0) 5 (79) 9 (30) 99 (35) 0 (30) 3 (37) 0 (395) (9) 35 () (5,000) (7) () 9 (30) 0 (330) 07 (35) 3 (37) 9 (39) (3) 53 (0,000) 7 (55) (75) 90 (9) 95 (3) 0 (33) 0 (3) (3) 7 (33) 0 (5,000) 7 () 0 () 5 (7) 9 (9) 90 (9) 9 93 (305) 9 (309) 9 07 (0,000) () 9 () 70 (3) 7 (35) 73 (0) 7 () 7 (9) 77 (53) 30 (5,000) 3 07 (30,000) 57 () 5 () 59 (93) 5 (70) 0 (97) 53 (75) (0) 55 (79) 3 (0) 5 () () 57 () (5) 59 (93) 9 () 0 (97)
combinations No. 55 or No. 55A Combinations ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) Inserts, m (0 ft) 3,0 m (0 ft), m (0 ft) 3 3 5 5 No. 79A Fixed Jib Combinations Fixed Jib ength 7, (50) 33,5 (70) 39, (90) 5,7 (0) Fixed Jib Inserts, m, m (0 ft) (0 ft) - - - - NOTE: 3, m (0') basic boom consists of, m (0') butt, 3,0 m (0') insert with drum,, m (0') insert,, m (0'), and 9, m (30') top. May use, m (0') No. 55 insert with or without sheaves. 9, m (30 ft) No. 55 or No. 55A Top, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert No. 55 or No. 55A eavy-ift 0,0 m (00 ft) No. 79A Fixed Jib 7, m (90 ft) 9, m (30 ft) No. 79A Jib Top, m (0 ft) No. 79 Jib Insert, m 0 ft) No. 79 Jib Butt 9, m (30 ft) No. 55 Top, m (0 ft) No. 55 Insert No. 55 or No. 55A eavy-ift 97,5 m (30 ft), m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert 3,0 m (0 ft) No. 55 Insert, m (0 ft) No. 55 Butt, m (0 ft) No. 55 Insert 3,0 m (0 ft) No. 55 Insert, m (0 ft) No. 55 or Butt Model 000 No. 79A Fixed Jib on No. 55 or No. 55A eavy-ift Main,0 m (90 ft) Model 000 Model 000 No. 55 or No. 55A eavy-ift Main 97,5 m (30 ft) 5
combinations No. 55-79A Combinations ength 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 03, (30) 09,7 (30) 5, (30),9 (00) 3,0 m (0 ft) 55* 79 Transition, m (0 ft), m (0 ft), m (0 ft), m (0 ft), m (0 ft) Inserts NOTE: 3, m (0') basic boom consists of, m (0') butt, 3,0 m (0') insert with drum,, m (0') insert,, m (0'), and 9, m (30') top. May use, m (0') No. 55 insert with or without sheaves. 3 3 5 5 No. 55-79A 9, m (30 ft) No. 79A Top, m (0 ft) No. 79 Insert, m (0 ft) No. 79 Insert, m (0 ft) No. 79 Insert, m (0 ft) No. 79 Insert No. 55-79A eavy-ift,9 m (00 ft), m (0 ft) No. 79 Insert, m (0 ft) No. 79 Insert, m (0 ft) No. 55-79 Transition Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert 3,0 m (0 ft) No. 55 Insert, m (0 ft) No. 55 Butt Model 000 No. 55-79A eavy-ift Main,9 m (00 ft)
combinations No. uffing Jib Combinations No. 79A uffing Jib Combinations uffing Jib ength uffing Jib Inserts 3,0 m, m, m (0 ft) (0 ft) (0 ft) uffing Jib ength uffing Jib Inserts, m, m (0 ft) (0 ft),3 (70) 7, (90) -, (0) 33,5 (0) 7, (90) 30,5 (00) 33,5 (0) 9, m (30 ft) No. Jib Top 39, (30) 5,7 (50) 5, (70) 9, m (30 ft) No. 79A Jib Top 3, (0) 39, (30),7 (0), m (0 ft) No. Jib Insert 57,9 (90),0 (0) 70, (30) 3 3, m (0 ft) No. 79 Jib Insert 5,7 (50), (0) 5, (70) 5,9 (0) 57,9 (90),0,0 (0) 7, 70, (30) 73, (0) 3 3 3 3 No. uffing Jib 73, m (0 ft), m (0 ft) No. Jib Butt, m (0 ft) No. Jib Insert, m (0 ft) No. Jib Insert, m (0 ft) No. Jib Insert 3,0 m (0 ft) No. Jib Insert 7, (50),3 (70),3 (90) 9,5 (30) No. 79A uffing Jib 9,5 m (30 ft) 5 5, m (0 ft) No. 79 Jib Insert, m (0 ft) No. 79 Jib Insert, m (0 ft) No. 79 Jib Insert, m (0 ft) No. 79 Jib Insert No. 55-79A eavy-ift 5,3 m (0 ft) 9, m (30 ft) No. 79A Top, m (0 ft) No. 79 Insert, m (0 ft) No. 79 Insert, m (0 ft) No. 79 Jib Insert 3,0 m (0 ft) No. 79 Jib Insert, m (0 ft) No. 79AJib Butt, m (0 ft) No 79 Insert, m (0 ft) No. 55-79 Insert No. 55 or No. 55A eavy-ift 5,9 m (0 ft) 9, m (30 ft) No. 55 Top, m (0 ft) No. 55 Insert, m (0 ft) No 55 Insert, m (0 ft) No. 55 or No. 55A Insert, m (0 ft) No. 55 or No. 55A Insert, m (0 ft) No. 55 Insert, m (0 ft) No. 55 Insert 3,0 m (0 ft) No. 55 or No. 55A Insert, m (0 ft) No. 55 or No. 55A Butt 3,0 m (0 ft) No. 55 Insert, m (0 ft) No. 55 Butt Model 000 Model 000 Model 000 No. uffing Jib on No. 79A uffing Jib on No. 55 7 No. 55-79A eavy-ift Main or No. 55A eavy-ift Main 5,5 m (50 ft) 9,3 m (90 ft)
eavy-lift boom range diagram No. 55 or No. 55A Main (30) 03, 3 0 0 0 (30) 97,5 97, 5 (30) 70 0 9, 9, 0 0 (0) 5,3 5,3 (0) (0) 79, 79, (0) 50 0 (0) 73, 73, (0) 7, 7, 0 0,0 (0) 5,9 (0), (0),7 (0) 3,, (0),7 (0) 3, (0), 0 5,9 (0) 30 0 (00) 30,5 0 0 (0), (0),3 (0), 0, m (33' 5") T AISWIN G,5 m (5' 0") R O T A TIO N, (0) 3, m (' 5"),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0)
eavy-lift boom load charts iftcrane Capacities No. 55 or No. 55A with 30,5 m (00') Mast No. 5 39 500 kg (5,000 lb) Counterweight 5 50 kg (30,000 lb) Carbody Counterweight 30 Rating kg (lb) x 000 7,3 (),0 () 9,0 (30),0 (3),0 (0),0 (5),0 (50),0 (0),0 (70),0 (0),0 (90) 30,0 (00) 3,0 (0) 3,0 (0) 0,0 (30),0 (0) 50,0 (0) 5,0 (0) 0,0,0 7,0 (0) 7,0 (50) 7,0 (55) 3, (0) 00,0 (3.) 5, (5.7) 5, (995.9) 375,5 (30.) 33, (75.) 9,5 (57.7) 50,0 (53.),3 (7.) 7, (39.) 55, (33.3),0 (.3),0 (5.7) 9, (3.5),9 (7.),7 (0) 57,5 (99.) 373,9 (.) 3,3 (7.5) 90,3 (5.9), (50.) 7,0 (9.9) 7,3 (39.9) 5,3 (333.) 5,3 (.7) 3,3 (.) 9, (.0),3 (5.9) 73,3 (.) 7, (5.7), (0) (97.9) 37, (.5) 30, (73.),7 (5.5) 7, (577.0) 5,5 (.5) 9, (3.5) 5, (330.5), (.), (.) 93, (09.7) 5,3 (3.) 7,3 (.9), (3.) (.) 5,9 (0) 370,5 (.9) 33, (73.) 7,3 (.) 5, (573.),0 (3.3),3 (35.3) 5,3 (37.) 3, (79.9), (39.) 9, (07.0), (0.9) 7, (59.) 5, (0.9),3 (.7),7 (9.),,0 370, (.7) 337,7 (73.),5 (.),9 (57.0),9 (.5) 7,5 (33.) 50, (35.9),7 (7.9) 0, (3.) 9,3 (05.) 3,5 (79.) 70,5 (57.9) 5,0 (39.) 7, (0.), (.) 7, 33, (7.) 5,0 (3.) 3,3 (5.5), (57.9) 5, (379.), (3.7),5 (7.) 09,3 (35.) 9,9 (0.), (7.5) 9, (5.) 3,5 (3.),3 (07.) 39, (.9) 3, (7.3) 73, (0) (75.9) 3,9 (0.),3 (5.) 0,5 (55.5),7 (377.) 7,7 (39.) 0,7 (7.3) 0, (33.) 9, (00.9), (7.), (5.),7 (3.5) 5, (05.3) 3,9 (3.0) 30,7 (5.),3 (50.) 79, (0),5 (3.7) 0, (5.) 0, (5.7) 3,0 (373.5) 5,9 (35.) 9, (70.) 07, (3.3) 7, (97.7) 79,7 (7.3),7 (9.5), (3.) 3,9 (0.) 37,3 (79.5) 9, (.9),3 (.5) 5, (3.), (5.) (.9) 5, (0), (33.7) 39, (559.) 07, (9.0),7 (3.7),7 (3.) 7,9 (7.) 0, (.), (95.5) 7,7 (9.0) 5, (7.) 0, (.7), (99.) 3, (77.), (59.5), (3.), (9.) 0, (3.0),7 (9.9) 9, 3, (55.0) 05, (5.) 59,9 (3.),9 (30.), (3.7) 0,7 (.) 5, (9.) 77, (5.),0 (3.7) 5,5 (5.), (95.) 3, (73.5), (55.9) 9,0 (39.), (.9), (.) (5.) 97,5 (30) 3,3 (5.) 0, (5.) 0,0 (3.9),9 (30.7), (3.7) 0,9 (5.3) 5,3 (9.) 77, (.), (.) 5,7 (5.),3 (9.) 3,7 (73.), (5.) 9,3 (0.), (5.) (9.5) (.) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. Model 000 9
eavy-lift boom range diagram No. 55-79A Main (0),0 3 0 0 0 (00),9 (30) 5,, 9 (00) 5, (30) 70 0 (30) 09,7 09, 7 (30) 0 0 (30) 03, 03, (30) (30) 97,5 9 7, 5 (30) 50 0 9, 9, (0) 5,3 (0) 79, 5,3 (0) 79, (0) 0 0 (0) 73, 73, (0) 7,,0 (0) 5,9 (0), (0),7 (0) 3,, (0),7 (0) 3, (0) 5,9 (0) 7,, 0 30 0 0 0 (00) 30,5 (0), (0),3 (0), 30 0, m (33' 5") T AISWIN G,5 m (5' 0") R O T A TIO N, (0) 3, m (' 5"),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30)
eavy-lift boom load charts iftcrane Capacities - 000 No. 55-79A with 30,5 m (00') Mast No. 5 39 500 kg (5,000 lb) Counterweight 5 50 kg (30,000 lb) Carbody Counterweight 30 Rating kg (lb) x 000 3, (0),7 (0), (0),0 7, 73, (0) 5,3 (0) 9, 97,5 (30) 09,7 (30) 5, (30),9 (00) 7,9 () 53,5 (000.0) 9, (30) 0,0 (3),0 (0),0 (5),0 (50),0 (0) 0,0 (70),0 (0),0 (90) 30,0 (00) 3,0 (0),0 (0),0 (0) 5,0 (0) 0,0,0 7,0 (0) 7,0 (0),0 (0),0 9,0 (30) 9,0 (30) 53,5 ( 000.0) 9, (9.) 39,5 (75.5) 97, (70.) 55, (595.), (5.5) 99,0 (07.),5 (39.7),0 (99.) 0,0 (5.9) 9, (9.) 53,5 (000.0) 7,7 (.) 3, (755.7) 9, (7.9) 5, (593.) 3, (3.) 9,0 (05.) 0, (37.7) 5, (9.) 9,5 (57.) 9,7 (99.9) 7, (0.0),0 (939.3),0 (.) 3, (75.0) 9, (.) 53, (590.5), (0.) 9, (0.) 59,3 (3.),7 (9.), (55.) 9,7 (97.9) 73, (5.) 59,9 (9.0) 30,7 (750.0) 9, (3.5) 5, (59.), (79.) 9, (0.3) 5,7 (33.5), (9.),5 (55.7) 9, (97.) 73,3 (57.9) 59,9 (9.0) 9,7 (0.9) 309, (3.) 7, (7.5) 5, (5.7) 0, (77.) 95,3 (399.) 57,9 (3.7) 3, (95.0),0 (5.5) 9, (9.) 7,7 (5.7) 59,3 (7.) 9, (05.7), (.3) (33.7),0 (599.) 35, (53.9), (0.5) 9, (39.) 57,5 (30.9) 3, (9.7) 7, (5.) 90,9 (95.9) 7,5 (5.) 59, (7.3) 9,0 (05.3),0 (.0) 3,5 (73.) 0,7 (.0) 0,9 (.), (0.) 9,7 (35.) 3, (3.) 33,7 (0.9),5 (5.) 9, (93.5) 7, (53.7) 5,0 (.) 7, (0.) 39, (5.5) 33, (7.),0 (59.) 3,5 (50.0) 9,0 (30.5) 77,3 (33.) 59,9 (33.) 35, (93.) 5, (3.7) 0,0 (39.) 9,0 (90.7) 75,5 (5.) 57, (.9) 7,0 (00.9) 39,0 (3.) 3,5 (9.) 7, (5.0),7 (.), (39.), 77, (397.5) 7,3 (3.3) 5,7 (3.) 7, (77.),7 (.9) 03, (5.5) 7, (9.) 70,0 (50.7) 5, (.7), (99.7) 3, (.) 3,0 (.), (5.), (7.),3 (3.7),0 (30.) 3,5 (.3) 0,9 35,3 (9.3) 33,7 (.),7 (9.0) 0,0 (.) 9, (99.9) 7,7 (.5) 5, (.9) 5,9 (.0),7 (95.9) 3,7 (7.) 30,3 (.),9 (53.) 0, (3.3), 5,7 (35.0) (33.9),3 (.),7 (.) 9,3 (.7) (57.),0 (5.) 09,5 (3.) 00,3 (09.), (.3) 7,9 (55.9) 0,9 (3.) 5, (3.) 3., (93.) 35, (7.5) 9,3 (.5),0 (50.9) 9,5 (.) 3, (.) 0,5 (0.0), (.) (0.) 99, (0.) 99,5 (9.3) 95, (99.), (7.) 7, (.7) 57,0 (3.),9 (05.), (9.3) 35, (7.9), (0.9) 3, (9.3), (39.),9 (3.), (.) 9,7 7, Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. Model 000 3
Extended upper boom point range diagram No. 55-79A Main with 7, m (5 ft) Extended Upper Point (0),0. 0 0 0 (00),9 (30) 5,, 9 (00) 5, (30) 70 0 (30) 09,7 09, 7 (30) 0 0 (30) 03, 03, (30) (30) 97,5 9 7, 5 (30) 50 0 9, 9, (0) 5,3 (0) 79, 5,3 (0) 79, (0) 0 0 (0) 73, 73, (0) 7,,0 (0) 5,9 7,, 0 30 0 (0), (0),7 (0) 3, 0 0 (00) 30,5 (0), (0),3 (0), 0, m (33' 5") T AISWIN G,5 m (5' 0") R O T A TIO N, (0) 3, m (' 5"),3 (0), (0) 30,5 (00) 3, (0),7 (0), (0) 5,9 (0),0 7, 73, (0) 79, (0) 5,3 (0) 9, 97,5 (30) 3
Extended upper boom point load charts iftcrane Capacities - Model 000 No. 55-79A Main with 7, m (5 ft) Extended Upper Point 39 500 kg (5,000 lb) Counterweight 5 50 kg (30,000 lb) Carbody Counterweight 30 Rating kg (lb) x 000 5, (50),0 (55),0 (0) 0,0 (5),0 (70),0 (0),0 (5) 30,0 (00) 3,0 (05) 3,0 (0) 3,0 (0) 3,0 (5) 0,0 (30),0 (0),0 (50) 50,0 (5) 5,0 (75) 5,0 (90),0 (05),0 (5) 7,0 (0),0 (0) 9,0 (30),0 3, (9.) 3, (9.) 3, (9.) 3, (9.) 3, (9.) 3, (9.) 3, (9.) 3, (5.3),5 (.0) 03,3 (3.) 95, (05.), (9.3), (3.7) 7, (5.) 7, (9.3) 59, (9.3) 5,5 (.0),7 (03.) (30.5) 73, (0) 3, (9.) 3, (9.) 3, (9.) 3, (9.) 3, (9.), (3.),7 (.3) 0,5 (30.7) 9, (0.0) 7, (9.),3 (.) 75,7 (3.), (7.3) 5,3 (7.) 5, (.) 5,9 (0.),0 (9.3) 3,7 (75.) (7.) 5.3 (0) 3, (9.) 3, (9.) 3, (9.) 9,5 (.3),0 (.0) 07, (37.) 0,5 (7.) 93,5 (0.),5 (90.0) 0, (79.) 7, (0.7) 5,0 (.7) 57, (.) 50, (3.5),7 (99.0) 39, (.7) 33, (7.9), (.) 97.5 (30) 3,7 (9.) 3, (9.9),9 (70.) 5,5 (55.5) 0, (0.0) 95, (0.3) 90, (0.) 5, (5.7), (7.) 77,3 (7.0) 73, (57.) 3,7 (.) 55,7 (.7) 9,0 (0.5) 3,3 (95.9) 3, (3.) 3, (9.9) 7,0 (.), (.5) 09,7 (30) 99,9 (0.9) 99,3 (.7) 9, (7.7) 9, (9.0), (5.) 79,7 (7.0) 75, (.3) 7,9 (5.), (5.) 5, (.) 59,7 (3.5) 5, (.) 7,3 (0.7), (9.) 3,7 (79.) 30,5 (.) 5,3 (57.3) 7, (3.7) 0,0 (.7),9 (00) 7, (7.) 75, (.9) 7,7 (.5) 7, (3.7) 7, (.), (.5), (.),3 (3.7) 5, (.) 5, (.) 7,7 (0.) 3,5 (97.) 39, (7.7) 35, (7.), (.5) 3, (53.7) 5,5 (35.),0 (.3) Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. Model 000 33
Fixed jib range diagram No. 79A fixed Jib No. 79A with 5, m (50 ft) Strut on No. 55 or 55A with 30,5 m (00 ft) mast No. 5 (30) 9 7, 5 ( 3 0) 9, 5 0 0 5 0 9, (90), 0 0 70 0 (0) 5,3 33,5 (0) EIGT AB O VE G R OUND m (ft ) (70),3 (0) 79, (50) 7, (0) 73, (30) 70, 7, 0 5, (50),3 (70) 7, (90) 70, (30) 7, (50),3 (70), (90) 0 0 50 0 ( 0), 0, 0 ( 90) 57, 9 ( 0) 5, 9 ( 70) 5, 57,9 (90),0 (0) 0 0 ( 0), ( 50) 5, 7 30 0 ( 0), 7 ( 30) 39, ( 0) 3, ( 0) 33, 5 ( 00) 30, 5 0 0 (90) 7, (0), (70), 3 (0), 3 (50) 5, (0), (30) 9, 0, m (33' 5") T AISWIN G,5 m (5' 0") R O TA TIO N 3, m (' 5"), (0), 3 (0), (0) 30,5 ( 00 ) 3, ( 0 ),7 ( 0 ), ( 0 ) 5,9 ( 0 ), 0 DI S T ANCE F R OM CENTERINE OF R O TA TION m (ft ) 7, 73, (0) 79, (0) 3
Fixed jib load charts Jib ength 5, m (50 ft) iftcrane Jib Capacities - 000 Series Jib No. 79A with 5, m (50 ft) Strut on No. 55 or 55A with 30,5 m (00 ft) mast No. 5 39,500 kg (5,000 lb) Crane Counterweight 5,50 kg (30,000 lb) Carbody Counterweight 30 Rating kg (lb) x 000 3,7 (5), (55),0 (70),0 (90) 3,0 (0),0 (0),0 (0) 5,0 (0) 0,0,7 (0) 95,0 (50.),0 (5.) 5,7 (30.) 33,3 (73.5) 79, (7.3) 0, (9.), (9.3) 3, (7.7) 5 Offset, (0) 5, (50.),3 (377.) 3, (70.0) 7,5 (.3) 5,9 (.0), (95.) 33, (70.0), (7.) 5,9 (0),7 (50.0) 3,0 (37.3) 30,3 (.) 77, (5.3) 57,5 (.) 3, (9.7) 3,7 (.3),3 (3.9),0, (50.5) 7, (370.9) 33,5 (3.) 79,3 (.5) 5, (0.0),9 (9.0) 30, (3.5) 0, (.) 7, 7,7 (7.) 0, (.3) 7, (77.) 7,5 (5.) 5,7 (0.) 0,3 (9.),3 (0.3), (.),7 (0) 70, (390.7) 37,0 (.0),3 (7.), (3.9) 7, (00.),9 (0) 9,3 (3.5) 35, (7.3), (7.),0 (30.3), (9.) 3,5 (7.) 0 Offset 5,9 (0),5 (3.7) 3,7 (75.) 0, (7.9) 59, (7.7), (95.3) 33, (9.),3 (5.7),0 7, (3.0) 33,5 (73.0) 79,3 (9.) 5, (5.) 3,9 (93.) 3,3 (7.7), (.) 7,,5 (3.) 3, (70.) 7, (7.3) 57,5 (.),5 (90.) 30, (3.5) 9, (0.5),0 (.) 9, (.) (.), (0.9) 7,0 (0) 5, (0),0 (0) 5,0 (0),0 5, (0),0 (0) 5,0 (0),0 3,7 (5) Jib ength,3 m (70 ft),0 (55),0 (70),0 (90) 3,0 (0),0 (0),0 (0) 5,0 (0) 0,0 9, (5.) 7, (3.) 35, (77.), (75.), (33.) 7, (0.0) 3,7 (7.) (5.), (3.3) 33, (7.3) 0,5 (7.) 0, (30.0),3 (9.7) 35, (7.7) 5, (5.) 5, (30.) 3,5 (7.) 79,3 (70.) 59, (.9), (95.) 33, (70.) 3,3 (.3) 3,9 (37.) 30, (7.7) 77,9 (7.0) 5,0 (3.) 3, (9.) 3, (7.5),9 (5.) 73, (397.5) 39, (.) 5,0 (.),5 (3.) 9,5 (05.) 37,9 (0.) 73,0 (39.) 3,7 (.), (0.) 3, (35.7),3 (03.0) 35, (77.) 5, (5.7) 37,9 (.) 3, (7.),3 (33.3) 7, (00.) 35, (75.0) 5,0 (5.) 3,5 (79.5), (7.0),3 (30.9),0 (97.9) 3, (7.7),0 (9.5),0 (3.), (9.) 0, (.), (9.7) 7,0 (0) Model 000 Meets ANSI B30.5 Requirements - Capacities do not exceed 75% of static tipping load. 35 NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.