VENTE AUX ENCHÈRES PUBLIQUES

VENTE AUX ENCHÈRES PUBLIQUES Auctionsale after bankruptcy in France À la requête de Stéphane HOAREAU Mandataire Liquidateur 135 Avenue de Comminges 31270 CUGNAUX MAINTENANCE AERONAUTIQUE VENTE EN SIMULTANÉ SUR WWW.INTERENCHERES-LIVE.COM LIVE BIDDING ON THE INTERNET AIRCRAFT MAINTENANCE Catalogue complet disponible sur notre site internet Detailed catalogue on our website Mardi 28 Novembre 2017 à 10h00 HOTEL DES VENTES 3 Boulevard Michelet Place Saint Aubin 31000 TOULOUSE Tuesday, November 28th 2017 at 10.00 a.m AUCTION ROOM 3 Boulevard Michelet Place Saint Aubin 31000 TOULOUSE www.lutece-industrie.com www.interencheres.com/31004 Pour tout renseignement / For all request : Tél. : +33 (0)1 39 56 07 63 Par le ministère de Maître Marc LABARBE Commissaire-Priseur Judiciaire 3 Boulevard Michelet - Place Saint Aubin - 31000 TOULOUSE Tél. : +33 (0)5 61 23 58 78 - Fax : +33 (0)5 62 27 29 28 E-mail : contact@marclabarbe.com Assisté par : LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles 60, rue de Castagnary - 75015 PARIS Tél. : +33 (0)1 39 56 07 63 - English and Spanish : 33 (0)7 81 58 50 40 info@lutece-industrie.com

NOTICE FOR BUYERS The public auction sale is ruled by the General conditions of sale which are at the end of the catalogue, and, besides, by the following ones. VIEWING Monday, November 27 th 2017 from 10h00 a.m to 18h00 ASI MAINTENANCE 135 Avenue du Comminges 31270 CUGNAUX AUCTION SALE The auction sale will be held Tuesday, November 28 th 2017 at 10h00 a.m Auction Room 3 Boulevard Michelet - Place Saint Aubin 31000 TOULOUSE By the ministry of Maître Marc LABARBE Commissaire-Priseur Judiciaire 3 Boulevard Michelet Place Saint Aubin 31000 TOULOUSE Tel: +33 (0)5 61 23 58 78 / Fax: +33 (0)5 62 27 29 28 / contact@marclabarbe.com Buyers are required to fill in the buyer s card available in the auction room and at the viewing, by writing their complete references, and, auction being cash, to give a signed check at the order of Maître Marc LABARBE and a bank guarantee (model hereafter) if the check is not certified. For the buyers subjugated and identified in an EU state member, write their VAT ID. n and produce the id. n given by the administration of their own country. Auctions are made net of tax. The purchaser will pay, in addition to price of adjudication a buyer s premium of 14,4 % with VAT as well as the VAT of 20 % on the total price. CLEARANCE OF LOTS Referring article 4 of the general conditions of sale, no clearance will be able without complete and certified payment. Clearance on working days by appointment Removal from Wednesday, November 29 th 2017 at 8h00 a.m to Friday, December 1 st 2017 at 12h00 p.m And from Monday, December 4 th 2017 at 10h00 a.m to Friday, December 8 th 2017 at 12h00 p.m PAYMENT / BANK DETAILS BNP PARIBAS TOULOUSE Maître Marc LABARBE Code Banque 30004 - Code guichet 00762 - N de compte 00010499929 - Clé RIB 63 IBAN FR76 3000 4007 6200 0104 9992 963 SWIFT : BNPAFRPPTLS The translation of the French catalogue is intended only for purpose of understanding: the genuine text in French language is the only one available for legal matter. The conditions of sale in French are detailed in the French catalogue. 1

GUARANTEE OF PAYMENT / BANKBÜRGSHAFT We, the undersigned Bank / Wir, die unterzeichnete Bank Address / Adresse Phone: Fax: Guarantee the amount of Euros / Garantieren bis zum Betrag von Euros Being the amount of the bid / die Kaufgeschäfte By Mister or Miss Company / Firma Head Office Commercial Registration n Holder at this bank of account n / Inhaber des bei uns geführten Kontos During the auction sale / bei der Versteigerung of ASI MAINTENANCE For payment, Mister/Miss from the company... will establish a check that we guarantee with the above mentioned limits or the payment, with his first written demand on the same conditions, could be done to the account of the auction s office / Zum Zweck der Zahlung wird unser Kunde entweder einen Scheck ausstellen, den wir bis zur Höhe des oben genannten Betrages garantieren, oder wir werden eine Überweisung auf das Konto des Amtsträgers vornehmen, sabald dieser uns die Rechnung vorlegt. Maître Marc LABARBE Commissaire-Priseur Judiciaire 3 Boulevard Michelet Place Saint Aubin 31000 TOULOUSE Tel: +33 (0)5 61 23 58 78 / Fax: +33 (0)5 62 27 29 28 / contact@marclabarbe.com Paiement BNP PARIBAS TOULOUSE Maître Marc LABARBE Code Banque 30004 - Code guichet 00762 - N de compte 00010499929 - Clé RIB 63 IBAN FR76 3000 4007 6200 0104 9992 963 SWIFT : BNPAFRPPTLS Done in / Ausgestellt in..., on / am.... Signature / Unterschrift: Commercial stamp / Stempel: 2

BUYING ORDER AUCTION SALE : ASI MAINTENANCE, Tuesday, November 28 th 2017 at 10h00 a.m NAME : FUNCTION... COMPANY ADDRESS :... :... ZIP CODE/ TOWN: PHONE NUMBER:. FAX: BANK :... ACCOUNT NUMBER... VAT NUMBER :...... Requests Maître Marc LABARBE to buy the lots mentioned below for us for the price with VAT (20%) and without fees (14,4 % TTC) maximum written during the auction sale : ASI MAINTENANCE, Tuesday, November 28 th 2017 Undersigned is conversant with the conditions of auction contract. Please find herewith the GUARANTEE OF PAYMENT. Lot Number Lot description AMOUNT in Euros excl. BUYER S PREMIUM ADJUGED PRICE in Euros DATE: SIGNATURE: 3

1 100 AEG electric grinder 2 100 BOSCH electric screwing machine, 3 batteries and charger 3 50 Complete kit comprising a set for PER 4 50 Complete kit comprising a set for PER 5 80 FACOM ratchet spanners and sockets box 6 40 STEINEL heat gun 7 100 Bosch electric drill 8 30 FACOM timing belt tension gauge 10 80 BOSCH GSR screwdriver-drill, 2 batteries and charger 11 50 ULTRA DUO PLUS 45 microprocessor-controlled, high-power, fast-charger 12 50 DIGITAL PROTRACTOR PRO 360 angle meter 13 80 AEG electric jigsaw, type ST800XE, No. 002254, year 2015 14 30 Punch pliers 15 30 STEEL eyelet pliers 16 30 KYOCERA printer, type FS-1370DN 17 200 KYOCERA photocopier, type TASKalpha 300i 18 30 Set of 2 melamine and metal desks, low cabinet and 2-drawer unit 19 40 FACOM tools box 20 50 Cutting table with built-in reel, comprising: table top made of grey melamine, with metal legs topped by a 2-level reel and equipped with a guillotine, 2 tables made of grey melamine with blue legs, blue metal rack with 3 levels, 2 beige and blue metal racks of 250 x100 x250 cm 21 300 FACOM 5-drawer roll cab with tools 22 300 FACOM 4-drawer roll cab with tools 23 300 FACOM 4-drawer roll cab with tools 24 300 FACOM 5-drawer roll cab with tools 25 300 FACOM 5-drawer roll cab with tools 26 300 FACOM 6-drawer roll cab with tools 27 300 FACOM 7-drawer roll cab with tools 28 300 FACOM 5-drawer roll cab with tools 29 300 FACOM 6-drawer roll cab with tools 30 300 FACOM 5-drawer roll cab with tools 31 300 FACOM 5-drawer roll cab with tools 32 300 FACOM 5-drawer roll cab with tools 33 300 FACOM 6-drawer roll cab with tools 34 300 FACOM 5-drawer roll cab with tools 35 300 FACOM 6-drawer roll cab with tools 36 300 FACOM 6-drawer roll cab with tools 37 300 FACOM 5-drawer roll cab with tools 38 300 FACOM 5-drawer roll cab with tools 39 300 FACOM 5-drawer roll cab with tools 40 300 FACOM 5-drawer roll cab with tools 41 300 FACOM 7-drawer roll cab with tools 4

42 300 FACOM 5-drawer roll cab with tools 43 300 FACOM 5-drawer roll cab with tools 44 300 FACOM 5-drawer roll cab with tools 45 300 FACOM 5-drawer roll cab with tools 46 300 Set of 4 FACOM tool boxes 47 300 Set of 3 FACOM tool boxes 48 300 FACOM 5-drawer roll cab with tools 49 300 FACOM 5-drawer roll cab with tools 50 300 FACOM 5-drawer roll cab with tools 51 300 FACOM 5-drawer roll cab with tools 52 150 4-drawer low roll cab 53 300 FACOM 5-drawer roll cab with tools 54 300 FACOM 5-drawer roll cab with tools 55 300 FACOM 5-drawer roll cab with tools 56 300 FACOM 5-drawer roll cab with tools 57 100 1 HSM cardboard shredder, type Profipack 400, No. 420002223 58 30 2 strapping kits for polypropylene strips (manual strapping machine) with its trolley 59 300 Office of the Workshop head consisting of 2 melamine and metal tables with 2 three-drawer units, KYOCERA FS-13770DN printer, metal shelves, coat rack, various electric outlets, small metal hardware, safety equipment for work at heights and miscellaneous 60 100 Set consisting of a melamine work table, 5 reel-type electric extension leads and miscellaneous 61 250 Set consisting of various hand tools and portable electric tools (BOSCH circular saw, BOSCH planer and 2 grinders) 62 50 MAP double brushing / grinding wheel 63 80 Metal and wooden workbench with vice and miscellaneous 64 300 MAG C201 welding machine 65 250 PROMAC pillar drill, No. 212757, year 2003 66 120 DEWALT mitre saw 67 350 DIACRO multi-purpose bender with 8 adjustable parts 68 50 Tripe ladder and two 3 and 4-stair stepladders 69 500 OPTIMUM electric band saw for metals, year 2014, 1 loading mat, 2 OPTIMUM single-roller feeders, year 2014 70 300 LEMAN band saw on legs, 1 kw motor, cutting speed: 400/900 m/mm, cutting height: 200 mm, cutting width: 345 mm, blade width: 6 to 20 mm, blade length: 2490 mm 72 50 KARCHER vacuum cleaner, type: pro NT25/1AP, No. 064509, year 2016 73 30 Set of 13 decommissioned fire extinguishers 74 30 Set of 2 metal and PVC tall cabinets, with a lower rack made of OSB and metal, one dustbin 5

79 150 manager s office, consisting of: 2 grey metal tambour door cabinets, 2 5-level open metal cabinets, light grey metal cabinet, 2 low cabinets with beige metal tambour doors, desk with brown melamine tabletop and metal legs, visitor chair black fabric upholstery 80 80 SOEHNLE weighing scale, type 2755, No. 400302098846 81 50 4 suspended folder low cabinets and 2 rows for suspended folders 82 40 SERENITE counting scale, type 9860A.03 83 100 Set of BROTHER and DYMO RHINOPRO 5000 label printers 84 150 KYOCERA printer, type FS-C2626MFP 85 50 KYOCERA printer, type FS-C2526MFP (HS colours) 90 80 6-drawer blue Tiroclass 91 200 2 12-drawer Tiroclass with contents 92 200 2 12-drawer Tiroclass with contents, 1 4-drawer suspended folder row 93 200 2 12-drawer Tiroclass with contents 95 300 FACOM 5-drawer roll cab with tools 96 300 FACOM 5-drawer roll cab with tools 97 300 FACOM 7-drawer roll cab with tools 98 300 FACOM 5-drawer roll cab with tools 100 1 500 Blue metal mezzanine of approx. 11 m x 6 m, hard board, equipped with a 10-stair metal staircase 101 500 Shelves above and below the mezzanine, consisting of: blue and beige metal rack with 4 levels - 300 x 200 cm, 19 grey metal racks of approx. 100 x 200 cm, 3 blue and beige metal racks with 6 or 7 levels - 500 x 200 cm, 3 brown and beige metal racks of approx. 120 x 160 x 40 cm, orange and blue cargo-carrier rack - 200 x 180 cm, blue and grey cargo-carrier rack of 200 x 180 cm, with 3 levels, galvanised metal rack of 60 x180 x110 cm with 5 levels, reel-holder metal rack of 300 x 40 x 180 cm, 4 blue and grey metal racks of 700 x 50 cm, with 6 levels, blue metal rack with 6 levels 105 100 000 Important lot of aerospace spare parts, market value around 480 000 HT (according to details in appendix provided for information only and without any guarantee in terms of quantities. Downloadable on www.lutece-industrie.com ) 106 1 000 Incoming stock - consumables (adhesives, lubricants, PPE and miscellaneous) 107 70 000 EMBRAER 135 / 145 - MSN 398 - A6 -RRA sold for parts 108 80 000 ROLLS-ROYCE engine, model AE 3007 A 1/3, N CAE-311413 109 30 000 EMBRAER 120 - MSN 304 - VQ - BCL sold for parts 110 50 Wooden desk, melamine desk with metal legs, wood-coloured tambour door low cabinet and 2 tables entry desks: 2 melamine and metal desks, mobile desk 111 50 for computers, 2 double-door metal cabinets, Kyocera printer, type FS-1370DN 112 150 Set of light-load shelves at the warehouse entrance, one metal storage tower 6

113 80 INDESIT refrigerator 114 150 Filing cabinet with drills, screwdriver bits and borers 117 200 FOG hydraulic press, type 240 (105), pressure: 5 tonnes 118 200 FAYARD power hammer, type KF320, No. 127-4278, year 1982 120 300 SAHINLER roller, type RS1270 x 90, No. 22849 121 200 2 workbenches with vices, 1 mobile work table of approx. 6 m x 1.2 m, 1 steel surface plate 122 500 300 x 150 cm metal surface plate on mobile metal legs 123 1 200 DURMA bending machine, type CK2002 (45) DURMAZLAR, serial No.: 4040061140, year 2006 124 500 Roller 125 180 6 forming dollies, different models 126 500 3 tambour door tall cabinets with miscellaneous tools 127 500 MYFORD lathe, type: super 7, metric thread 128 80 Manual guillotine shearing machine 129 200 ACETI 3 kw belt sander, type 63, year 1999 130 300 SYDERIC metal band saw, type SR37 131 120 PROMAC pillar drill, type 368, No. 2003, year 1993 132 5 000 NABERTHERM electric furnace, model N250/65HA, year 2013 No. 285777 (30-3000 C) door opening controls on th elegs with electrical panel and associated computer hardware, including a Dell OPTIPLEX 7010 PC, monitor, keyboard and mouse 133 1 800 BLOMBED shears, type 9F, No. 43783, capacity: 4 x 2000 134 500 2 barred enclosures with racks and metal sheets 135 2 000 136 500 Stock of metal sheets comprising approximately 70 stainless steel and aluminium plates Electrical maintenance office comprising 4 work tables, 2 metal low storage cabinets, 3 melamine desks with metal legs, approx. 5 m of light metal shelves, 4 tables and 2 chairs 137 50 FAR freezer, type MF-150, No. 431500056, capacity: 150 L 140 200 12-drawer Tiroclass with set of sockets 141 200 SKYDROLL pump 7

142 80 Set of grease pumps, oil syringes and miscellaneous 143 700 Programming kit for all versions of KANNAD, type PR550 144 50 ATLAS COPCO controller, type B 1900 - EMB 120 145 120 Callipers 0-600 mm 146 200 AAINTSZB844 test kit, code DLT05MAP1001 147 120 Ultrasonic cleaner 148 500 DMC 333 kit containing the repair kit for AIRBUS A300 149 500 CHADWICK HELMUTH rotor balancer kit, type 8500C+ 150 200 MOISTURE REGISTER PRODUCTS Moisture Test Kit 151 120 Temperature control box 152 550 EM8 135/145 data loader (FMS floppy) 153 200 Thermocouple ramp tester 154 200 T/S BARFIELD digital turbine temperature tester 155 150 Aircraft control cable tension gauge 157 150 Dynamometer and pressure/tension gauge 158 150 Pressure gauge 159 100 Inflation pressure gauge 160 200 150 to 450 LBS tension gauge 161 100 Inclinometer 163 100 CHATILLON mechanical dynamometer, type LG 50KC 165 170 METRIX power supply, type: AX 501 166 80 Artillery level 168 3 000 Miscellaneous tools and equipment with shelves 171 50 Helicoïl cases, 6-32, 5/16-18 173 100 9 J8 bell case 174 100 FACOM hole punch cases 177 300 DMT SFIM kit, type YV 8694 178 200 CHAUVIN ARNOUX milliohmmeter, type CA 10 180 300 MIGS Video Endoscope, type 6300 182 200 Cargo lining kit with TAYLOR pneumatic tools 183 150 WURTH glue kit 184 200 KULITE tester 185 200 POSITECTOR coating thickness gauge, type 6000 186 150 Stud extractor 187 120 Levelling tools case 188 200 BEM MULLER pneumatic valve grinder 190 250 Bearing extractor 191 300 ISO-TECH GFG frequency generator, type 8216A 192 300 AA PHILIPS Low Frequency Generator, type PM 6616 193 80 PRECIA ACCESS precision scales, type C131 AM 194 120 Set of 2 FACOM torque drivers 195 150 CHAUVIN ARNOUX megohmeter, type C.A 6523 196 150 BAND-IT Contact Insertion / Extraction tools 197 50 NES 3 thread restoration tools 8

198 120 Motor test kit 199 200 AVIONICA RSU 201 400 Pitot Static Test Set 202 120 Set of 3 GENER CHOCS screwdrivers 203 400 Horizontal Stab connection kit 204 300 ARINC 429 transfer dialogue box 205 100 PHILIPS oscilloscope, type PM 3365A 206 400 BARFIELD Pitot Static Test Set, type DPS 350 207 150 HEWLETT PACKARD oscillator 208 200 Test equipment box 209 200 Test equipment box 210 100 2 sets of rigging pins 211 200 Set of 4 lubrication kits 212 100 Pneumatic crimping tool 213 120 OMEGA MECHANIX torque wrench 214 100 FACOM torque wrench 215 80 FACOM torque wrench 216 50 SNAP-GN torque wrench 217 50 2 to 10 dan torque wrench 218 50 Stand micro control set 219 200 Synchronisation device 221 800 2 ROLLS-ROYCE grooving tools 222 100 DUKANE SECOM ultrasonic inspection kit 223 400 Set of 6 chain hoists and 1 DYNAFOR weighing scale 225 120 FACOM extractor 226 200 VION adjustment compass, type F0243 228 300 VELLEMAN ENERGY power supply type DC LAB 229 50 SKILL 2000 W heat gun 231 100 Set of 3 INGERSOLL-RAND pneumatic screwdrivers 232 80 Set of 2 INGERSOLL-RAND pneumatic screwdrivers 233 80 Set of 2 INGERSOLL-RAND pneumatic screwdrivers 234 120 FACOM bearing extractor 235 50 Set of 10 LED portable lamps 238 200 STANLEY optical levelling set, type AL24 239 300 Set consisting of a nose remover, blade lock and set of cylinder barrels 240 200 Cold working kit 242 300 Wall-mounted tool holder 243 50 SAM torque wrench, type: DYNASTOP 244 2 000 DEDIENNE AEROSPACE hydraulic lifting device, capacity: 90 T, year: 2009, closed height: 260 mm, hydraulic stroke: 300 mm, approach stroke: 110 mm 245 1 500 DEDIENNE AEROSPACE hydraulic lifting device, capacity: 60 T, year: 2008, closed height: 245 mm, hydraulic stroke: 320 mm, approach stroke: 125 mm 9

246 50 Set of GENERAL ELECTRIC Halogen bulbs 247 150 DEDIENNE AEROSPACE brake assembly and disassembly tool kit 248 150 Hydraulic accumulator controller 249 300 Set of miscellaneous tools and equipment for aviation, consisting of pliers, helmets, pressure gauges and other tools. 250 6 500 Complete rudder access dock for the aircraft, in 2 parts Each part consisting of 2 staircases + 30 aluminium platforms of 250 x 80 cm and a junction area comprising 11 galvanised platforms of 30 x 250 cm 252 3 000 Complete rudder access dock for the aircraft, in 2 parts made of galvanised steel 253 80 Access dock on wheels, comprising 3 platforms of 250 x 100 cm 254 1 000 Aluminium boarding stairs with 9 steps, platform with detachable guard rails and ramps 255 1 000 Aluminium boarding stairs with 9 steps, platform with detachable guard rails and ramps 256 1 000 Aluminium boarding stairs with 9 steps, platform with detachable guard rails and ramps 257 1 000 Aluminium boarding stairs with 9 steps, platform with detachable guard rails and ramps 258 1 000 Aluminium boarding stairs with 9 steps, platform with detachable guard rails and ramps 259 5 000 Multi-positions adjustable access dock equipped with 2 staircases and one crossover step, on wheels 260 5 000 261 1 200 262 500 263 1 200 Multi-positions adjustable access dock equipped with 2 staircases and one crossover step, on wheels Access dock on 6 wheels, of approx. 5 x 2.50 m, comprising: 18 platforms of 250 cm, platform with access hatch and staircase with 7 steps 4-wheeled dock of approx. 300 x 300 cm, equipped with 14 modular galvanised metal platforms Access dock on 6 wheels, of approx. 5 x 2.50 m, comprising: 18 platforms of 250 cm, platform with access hatch and staircase with 7 steps 264 1 200 6-wheeled dock of approx. 500 x 300 cm, equipped with ladder, 14 galvanised metal platforms and access hatch 265 200 4-wheeled dock of approx. 150 x 300 cm, equipped with 5 modular galvanised metal platforms 266 200 4-wheeled dock of approx. 150 x 250 cm, 2 levels 267 200 4-wheeled dock of approx. 300 x 300 cm, equipped with 14 modular galvanised metal platforms 268 100 Set of 4 stepladders with 5 to 10 steps 269 200 4-wheeled dock of approx. 200 x 200 cm, equipped with 10 modular galvanised metal platforms 10

270 150 4 access docks with 4 steps 272 50 4 crafted shutter supports with 4 wheeled shelves 273 100 2 Window panel supports with 4 wheels, of approx. 400 x 100 cm and with 14 shelves 274 100 Cockpit support 275 100 Set of 10 trolleys for cone and shutter supports 276 50 Set of 4 cone supports on crafted wheels 277 200 Double propeller support on wheels 278 50 Mobile metal support 279 50 Metal support 280 50 2 engine frames and 2 supports 281 50 2 AMBRAER yellow engine frames 282 400 Set of 2 white props 283 400 Set of 2 white props 284 400 Set of 2 12T cylinder props 285 400 Set of 2 cylinder props with support 286 400 Set of 2 cylinder props 287 200 Set of 2 cylinder props 288 300 WEBER-HYDRAULIK cylinder props with support, 8T capacity 289 300 WEBER-HYDRAULIK cylinder props with support, 8T capacity 290 300 WEBER-HYDRAULIK cylinder props with support, 8T capacity 291 300 WEBER-HYDRAULIK cylinder props with support, 8T capacity 292 300 WEBER-HYDRAULIK cylinder props with support, 8T capacity 293 600 Cylinder prop, 12T capacity 294 600 Cylinder prop, 12T capacity 295 600 Cylinder prop, 12T capacity 296 600 Cylinder prop, 12T capacity 297 600 Cylinder prop, 12T capacity 298 600 Cylinder prop, 12T capacity 299 600 Cylinder prop, 12T capacity 300 600 Cylinder prop, 12T capacity 301 200 Set of 4 props 302 200 Set of 4 12T props 303 200 Set of 4 12T props 304 200 Set of 4 12T props 305 500 Set of 2 6T props 306 800 Set of 4 6T cylinder props 307 800 Set of 4 4.5T cylinder props 308 800 Set of 4 TRONAIR props 309 800 Set of 4 8T TRONAIR props on wheels 310 200 8T cylinder prop with support 311 400 Set of 2 12T cylinder props 312 400 Set of 2 6T props 313 100 Set of 4 props 11

314 80 Set of 3 props on frame 315 150 Mobile double propeller support 316 120 Set of 2 mobile engine frames 317 500 2 jibs of a JAUNE GOUBARD forklift truck, type CRP 3OOO, year 2008 and 2003 318 50 White engine frame 319 100 2 mobile engine frames 320 1 500 MULAG towing tractor, type comet 11, No. 914027, year 1991 - No. of hours: 7366 321 3 800 322 4 500 323 3 000 TRACKAIR 4-wheeled generator set, type: DU 630 Guinault, Ford engine type: 2715 E diesel, water-cooled - 6 cylinders - 140 horsepower TRACKAIR 115 volts 4-wheeled generator set, type 90T20P, year 2000, JOHN DEERE engine, No. 92PS01000 TOYOTA TONER 30 forklift truck, type 02-8FGF30, chassis No. 8FGJF35 No. of hours: 1159 324 2 000 TOYOTA 25 Gas-powered forklift truck, type 42-5FG25, No. FSVA 400, year 1990 No. of hours: 10261 326 150 3 tow bars 327 100 Trailer 328 100 Orange pallet truck, capacity: 2 tonnes, No. 10011379-1/006, year 2010 329 800 COMPAIR compressor, type: 6000N, year 1996, for parts Compressor room 330 3 000 1 JLG electric scissor lift, type: 3246ES, No. 12000181 32, year 2008, equipped with a 300 x 100 cm work platform with a 2 m extension - Max. climb: 12 metres 331 1 500 HOLAND LIFT electric lift equipped with a 3 metre extension, type: X-105 EL 12, No. 105-09-3651, year 1999 332 2 500 MANITOU scissor lift, type: 100XEL, No. 580516, year 2009 333 2 500 JLG lift, type: 3246ES, No. 1200011731, year 2007, equipped with a 120 cm extension height: 9 m 334 2 500 MANITOU scissor lift, type: 100 x EL, No. 580522, year 2009, 1 m extendable platform 335 4 500 HAULOTTE articulated lift, type: HA12IP, No. AE102808, year 2005, 4 drive wheels, No. of hours: 101,126 - Max. height: 12 m 336 3 000 ALMIG variable speed screw compressor, type: 28, 12745 h, serial Compressor No.: F1513948/S0036452, 28 KW, year 2015 room 337 3 000 ALMIG screw compressor, type: BELT 30, 1980 h, serial No.: Compressor F1513944/S0036449, 30 KW, year 2015 room 338 1 000 INGERSOLL RAND air dryer, type: D600IN/8, 1.73 KW, No. 13M- 011678, year 2013 Compressor room 12

339 3 000 340 3 000 341 3 000 Vehicle: RENAULT MASTER DCI 120 - GO - 5 CV Registration: 561 BVW 44 Type: FDBUH Serial No.: VF1FDBUH634426279 Kms: 177,597 First commissioned on: 30/11/2005 Vehicle: CITROEN BERLINGO - GO - 6 CV Registration: AB-197-AH Type: 7B9HTC Serial No.: VF77B9HTC9J098881 Kms: 135,100 First commissioned on: 03/06/2009 Vehicle: CITROEN JUMPY - GO - 5 CV Registration: 132 CGD 44 Type: XS9HUC Serial No.: VF7X59HU064155762 Kms: 155,034 First commissioned on: 06/03/2008 342 1 200 343 1 500 344 12 000 345 10 000 Vehicle: RENAULT KANGOO D 65 - GO - 7 CV Registration: 148 BFJ 44 Type: FCOJHF Serial No.: VF1FC0JHF26878475 Engine replaced in 2006 Accident that affected the carriage body Comment: registered in the name of NANTES AERO. Registration not changed during successive transfers First commissioned on: 09/07/2002 Vehicle: RENAULT CLIO - GO - 4 CV Registration: 141 CNJ 44 Type: BR1GOH Serial No.: VF1BR1GOH41127025 Kms: 192,138 First commissioned on: 23/03/2009 Vehicle: AUDI A5 - GO - 9 CV registration: CM-970-KC Type: m10audvp0040992 Serial No.: WAUZZZBT3CAO23140 Kms: 106,543 Leather interior, automatic transmission First commissioned on: 31/10/2012 Vehicle: AUDI A6 - GO - 10 CV Registration: BZ-525-VB Type: M1DAUDV004N178 Serial No.: WAUZZZ4G2CN67390 Kms: 165,000 Black leather interiors, automatic transmission First commissioned on: 03/01/2012 13

346 2 500 AFEEI Frequency converter, type RU-50, n 96-29, 200w/400hz, 15413 h, converts 380 V / 50 Hz into 115 V / 400 Hz (travelling TGBI room converter and transformer) 348 300 Sand-blasting chamber without any visible brand 350 150 Set of power cables, distribution board and reel trolley 351 150 Set of 6-outlet compressed air headers, pipe with reel trolley 352 50 NUMATIC vacuum cleaner 353 120 2 KARCHER AAIFCZ242 vacuum cleaners 354 200 Karcher HDS 895 M ECO IPX5 355 200 Battery-operated KARCHER Professional KM 70/30C manual sweeper 356 1 200 KARCHER PROFESSIONAL IPX3 automatic scrubber, number: 015258, year 2015 357 1 000 MECANOLAV stainless steel washing machine, type: IC2, No. 2350, equipped with a round hamper 358 600 ZANUSSI 128 double boiler 359 1 000 MPL power charger, type: PE 9/26, No. 12295, year 1990 360 200 TRONAIR compressor, type: 05-7008-3400 10, No. 8806-10958 361 1 000 Wheeled container comprising 3 weighing scales for aircraft NEST CALIBRATION 363 1 500 ATH-HEINL wheel balancer, type: ATH 1200, No. 2014101164 364 200 Forced-air heating machine 365 500 LANSING BAGNALL sweeper, type: TOER4 2 SWB, No. 79104421 used 367 300 Hydraulic bench on casters and miscellaneous 368 200 TRONAIR ENGINE COMPRESSOR WASHER mobile sprayer, ref.: AAIFCZ900 No. 7/89 equipped with 2 air bottles 369 500 Set of 2 mobile blue lighting pylons (6-socket site connecting box, 220v three-phase input) 370 500 Set of 2 mobile blue lighting pylons (6-socket site connecting box, 220v three-phase input) 371 400 Set of infrared paint dryers with 3 HEAT Light Tech lamps, model: HLP 3000, No. A2027 of 07/ 2006 and mobiles light holders 372 300 Set of 3 holding tanks, 3 sand trolleys and one green PVC bin 373 200 Holding tank of approx. 260 x 130 cm and 2 drum holders 374 100 2 handling trolleys for oxygen cylinders, equipped with 2 pressure gauges 375 80 3 handling trolleys for oxygen cylinders, one brake bleeder trolley 376 200 SHOP CRANE wheeled lifting jack, 1 tonne, type: SA1000, No. GS904011, year 2009 377 800 MANUTAN mobile hydraulic crane, type: LPL 2D, lifting capacity: 2 tonnes, No. 1014 DEFLEUR, year 1995 378 300 7 wire rolls 379 80 Set consisting of one blue wire cage and one orange mobile shelf 380 150 WHIRPOOL washing machine, -8 kg A++ 14

381 100 HOTPOINT ARISTON washing and dryer machine, type: ARMXF145 382 150 WHIRPOOL washing machine, -8 kg A++ 383 100 LADEN 9 kg dryer, 1200 Watts 384 100 LADEN 9 kg dryer, 1200 Watts 385 100 Set consisting of 2 metal tall cabinets 386 150 Set consisting of a metal rack on casters, metal cabinet on casters with plexiglas doors and metal trolley 387 150 Set consisting of 2 mobiles shelves of 2.5 m x 1 m 388 150 Set consisting of 2 mobiles shelves of 2.5 m x 1 m 389 100 2 metal racks on casters 390 150 Set consisting of 2 mobiles shelves of 2.5 m x 1 m 391 200 4 metal racks on casters 392 120 2 metal racks on casters, 2 handling trolleys 393 120 4 mobiles work tables and handling trolley 394 250 5 metal racks on casters 395 100 4 mobiles work tables and handling trolley 396 120 KERN weighing scale 397 120 Set of 3 crossover steps with 2, 3 and 5 steps, and one EIDOS wheeled recliner 398 200 2 workbenches with tiroclass units 399 200 Set of lightweight metal and PVC shelves, loaded on pallets 400 440 22 ml of beige and blue metal racks with 3 or 4 levels et platforms made of plywood 401 300 Set of 10 work tables, including 2 on casters, 4 workbenches, 2 desks 402 100 Set of sawhorses, display panels and filing panels 403 200 Set consisting of 2 tables, 4 desks, 3 secretary s chairs, 4 rows of metal racks, 3 low cabinets and 2 tall cabinets 404 200 3 desk-tables, light brown melamine tabletop, metal and grey melamine legs + 2 units with 3 unpaired drawers + visitor s chair with black fabric upholstery + armchair, black fabric upholstery on casters + tambour door, grey tall cabinet with metal supports + table fan + KYOCERA printer (COPO4-T) Ecosys FS-3640MFP No. M2H.3146759 + brown melamine desk table without drawer unit + blue typist s chair + double-door beige metal cabinet + black metal rack with 4 levels + 2 old SODEM metal desks with 2 drawers + armchair and visitor s chair, black fabric upholstery + KYOCERA printer (IMPO5-T) Ecosys FS-1370DN No. Q663906259 405 100 Cleaning tank and miscellaneous Composite room containing 4 work tables, one mobile workbench Composite 406 200 and miscellaneous room 15

407 200 408 300 SHOP MO. MSN 463 room containing: One melamine and metal desk, approximately 10 m of light-load shelves, one handling trolley, one mobile rack Office 408, comprising 2 melamine desks with metal legs, 4 melamine desks, one wooden table with metal legs, one KYOCERA FS-3540MFP printer, one KYOCERA FS-1370DN printer and miscellaneous. SHOP MO. MSN 463 HM5 room ground floor office 409 200 Melamine reception desk and SAMSUNG TV ground floor office 412 2 000 Air Data accessories kit 413 1 000 BARFIELD Digital fuel quantity test set 414 200 WEBSTER hardness tester, type: WH-100 415 700 DMC maintenance kit with blades, knives, crimping tool positioners, test tools and miscellaneous 416 400 DMC maintenance kit with blades, knives, metal pens, crimping tool positioners, test tools and miscellaneous 417 300 AVIALL battery test kit, type: CA1550 CML, year 2013 418 2 500 Air Data kit: pitot and static test tools 420 300 TRULINE wattmeter 422 400 DMC maintenance kit with manual crimping tool, crimping tool locators and miscellaneous 423 200 Electricity test set for EMB-145 motivator 424 2 000 AEROFLEX runway tester for transponder installations, type: IFR 6000 425 500 HONEYWELL GPS data loader 426 500 Test bench for ventilation valves (aircraft valves), model: DC600, equipped with accessory DC-VT SM8 427 1 500 AEROFLEX IFR 4000 Nav/com runway tester 428 500 Stock of lubricants and miscellaneous (see details in the annexe) Lubricants room 429 2 500 ICI CALDAIE oil-fired boiler, type: REX 130, serial No. 04716 46925020, 5962 hours with 1 blue metal container of approx. 6m x 2m - ITTIS COFELY Exterior 430 500 TRACMA TD2500 towing tractor, year 1983, TRACMA TD3500 towing tractor, year 1978, set of non-operational machines and Exterior miscellaneous 433 200 CHRISTIE battery charger, type: RF80K 434 300 DMC maintenance kit with blades, knives, manual crimping tool, crimping tool positioners, crimping tool locators and miscellaneous 435 500 Kit ref.: AAISBKZ315 436 800 RAYCHEM test kit, No. SEF200800395 437 200 METRIX megohmmeter, type MX-405 F 443 150 Aileron weighing bench, 4 m x 0.8 m 444 1 500 Glazed Bungalow used as an office with 3 stations of approx. 6 x 3 m and with no contents 16

445 300 Glazed bungalow used as an office, lit and heated, approx. 220 x 250 cm HM6 hangar 446 1 000 Glazed bungalow with 2 entrances, approx. 600 x 220 cm, powered and heated, used as an office HM6 hangar 447 300 Powered glazed bungalow used as an office HM6 hangar 449 400 Photocopier KYOCERA Taskalfa 300 CI MFP, N QJE0805653 450 400 Photocopier (COP10-T) KYOCERA Taskalfa 300i, N QZK3226655 451 300 452 300 Reception desk made of light brown melamine and grey metal, comprising 3 parts: 2 rectangular desk tables with gradin, matching corner unit, matching triple-drawer unit and additional unit of another model with 3 drawers, executive chair on casters made of black imitation leather, tambour door beige metal cabinet and miscellaneous and INDESIT refrigerator Human resources office containing: 1 metal cabinet, with 2 tambour doors, grey and brown 1 grey metal rack of approx. 100 x 200 cm, with 3 levels 1 metal coat rack 1 tambour door metal cabinet 2 brown melamine desk tables equipped with 3 drawer units (2 metal with 2 drawers and brown melamine + 1 made of grey and brown melamine with 3 drawers) 2 executive chairs made of white imitation leather, on casters + 1 visitor s chair, black fabric upholstery 1 KYOCERA Ecosys FS-1370 DN printer, No. Q663906256 + 1 INTIMUS 1000S electric paper shredder + 1 KYOCERA Ecosys FS-C2526MFP (copo6-t) PF520 multi-function printer, No. NML1Z01512 and miscellaneous Reception office HR office 453 300 Accounts office comprising: Photo Nos. 5 to 8 2 desk tables, with light brown melamine tabletops and metal legs, with matching 2-drawer units on casters and one 3-drawer unit of another model. 2 desk tables, with matching 3-drawer units made of light brown melamine and metal legs 1 rectangular table, light brown melamine tabletop, 4 metal legs + 1 grey and brown low side table 1 HARTMANN TRESOR lock-up strongbox + 1 MASTER LOCK code and key-locked wall safe photo No. 8 1 FELLOWES 73 CI electric shredder + 1 BOSCH TASSIMO electric coffee machine 1 KYOCERA Ecosys FS-C2626MFP (COP14T) multi-function printer, No. NN13408191 1 KYOCERA Ecosys FS1370DN (Impo1-T) black-and-white printer, No. Q663677702 2 grey and brown tambour door metal cabinets 2 BISLEY metal cabinets and miscellaneous Accounts office 17

454 500 455 100 456 150 457 600 Meeting room containing: 1 white wall projector screen, ACER DLP PROJECTOR H7P1320 video projector, No. MRJHB11001438013E35900 and its remote control 3 glass-panel wall shelves of approx. 80 cm 1 modular conference table consisting of 8 parts made of grey and brown melamine: - 4 rectangular tables - 2 semi-circular tables 11 grey metal chairs with brown wooden seats 1 POLYCOM Voice station 500 compact conference telephone, No. 0004F26E0511 Set comprising: LG FLATRON wall-mounted TV, model: M4213CG, No. 009MAN540999 of 09/2010 4 low fireside chairs made of worn blue fabric + 1 crafted low side table Archives room containing: Photo Nos. 14 and 15 1 grey and brown tambour door metal cabinet 1 black tambour door metal cabinet 1 beige fireproof metal cabinet with key lock 3 ml of grey metal racks with 7 levels, made of galvanised metal 6 grey metal racks of approx. 100 x 180 cm, hard board miscellaneous Manager s office containing: 1 melamine desk unit consisting of: - 1 oval conference table - 1 low unit with 2 doors and a drawer - 1 desk and its 3-drawer unit - 1 side table on casters with 2 niches and 2 drawers 1 armchair on casters, black fabric upholstery 1 executive chair on casters, with black leather upholstery 8 armchairs with wooden and black leather upholstery 1 black metal cabinet with brown tambour door 1 lock-up strongbox of approx. 110 X 50 cm 1 TOP Proline refrigerator 1 CANON Pixma MG5752 multi-function printer, No. KKBN 40994 1 PANASONIC wall-mounted TV of approx. 140 X 80 cm with remote control 1 REXEL-Silencio paper shredder miscellaneous Meeting room Corridor Archives room Manager s office 18

458 200 459 460 200 Sales department, containing: 3 desk tables, with light brown melamine tabletops and metal legs 1 desk, with matching drawer unit made of light brown melamine + 1 unpaired unit 1 executive chair on casters 2 executive chairs on casters 1 typist s chair with blue fabric upholstery 1 visitor s chair with speckled grey fabric upholstery 1 typist s chair on casters, black fabric upholstery 1 armchair on casters, black fabric upholstery 1 KYOCERA Ecosys FS1370DN printer, No. Q663906260 Technical director s office, containing: 1 ATAL black and beige tambour door metal cabinet + 1 matching low cabinet 4 visitor s chairs, black fabric upholstery 2 semicircular tables made of light brown melamine, to be used as a conference table 1 desk-table, brown melamine tabletop, metal legs + 2-drawer unit 1 armchair on casters, worn blue fabric upholstery 1 executive chair on casters Quality offices, containing: 2 grey and brown tambour door metal cabinets 1 damaged grey tambour door cabinet, missing 1 tambour door 4 tables, with brown melamine tabletops, metal legs + 4 unpaired drawer units with 2 or 3 drawers 1 modern executive chair on casters, made of black imitation leather 1 older model executive chair, made of black imitation leather 2 armchairs, with black fabric upholstery 1 typist s chair on casters, blue fabric upholstery Sales department Technical director s office Technical office 461 500 Technical offices, containing: 6 brown melamine desk-tables + 5 unpaired drawer units on casters with 2 or 3 drawers 1 visitor s chair, black fabric upholstery 2 executive chairs on casters, with black imitation leather upholstery 5 beige or grey metal low cabinets (1 with sliding double-doors and 4 with tambour doors) 1 ATAL tambour door cabinet, small grey and beige model 2 grey and beige tambour door cabinets 2 rectangular tables, with light brown melamine tabletops and metal legs 1 HEPRO armchair on casters for handicapped persons with electric controls (adjustable height) 1 round brown melamine table of approximately 110 cm in diameter + 1 low unit with 2 doors and a matching drawer 1 KYOCERA Taskalfa 300 CI MFP photocopier of 08/2010, No. QJE0805653 Quality office 19

462 200 463 80 464 400 465 200 Airworthiness office, containing: 4 tables, with brown melamine tabletops, metal legs + 4 drawer units on casters with 3 drawers 1 executive chair on casters, made of black imitation leather 1 typist s chair on casters, with blue and black fabric upholstery 1 typist s chair on casters, with speckled grey fabric upholstery 1 visitor s chair, black fabric upholstery 3 vertically opening tambour door metal cabinets 1 brown melamine cabinet with 2 hinge-doors 1 magnetised whiteboard + 1 letter holder tray with 6 storage areas Recreation area containing: 1 brown melamine low unit with 2 hinge-doors 1 elbow-high single-door WHIRPOOL refrigerator Executive Assistant s area containing: 1 grey metal tambour door low cabinet 1 brown melamine low unit with 2 hinge-doors 1 grey and brown tambour door metal low cabinet 1 black tambour door metal tall cabinet 5 tables, with brown melamine tabletops, metal legs 2 armchairs on casters, black fabric upholstery 1 (COP10-T) KYOCERA Taskalfa 300i photocopier of 02/2013, No. QZK3226655 1 FELLOWES 90S electric paper shredder Purchasing division, containing: 1 grey tambour door low cabinet (old model) 1 metal cabinet with 2 dark grey doors 1 grey metal unit with 10 flaps - old model 5 desk tables, with brown melamine tabletops and black metal legs + 1 matching 4-drawer unit and 4 unpaired drawer units on casters with 2 or 3 drawers. 1 black tambour door metal low cabinet 2 executive chairs on casters, made of black imitation leather 1 armchair and 1 chair on casters, blue fabric upholstery Airworthines s office Recreation area Executive Assistant s area Purchasing division 466 200 Set of closets comprising: 6 blue and grey metal triple closets 8 blue and grey metal double closets 1 grey metal single-door closet 5 blue and grey metal quadruple closets 3 grey metal quadruple closets (2 doors are missing) 2 grey metal quadruple closets (1 door is missing) 4 grey metal double closets 1 grey metal triple closet (1 door is missing) HM6 hangar 20

471 300 472 200 473 300 474 150 475 150 476 150 Canteen comprising: 1 typist s chair on casters, black fabric upholstery 3 beige moulded plastic chairs 2 visitor s chairs, black fabric upholstery 1 black plastic chair + 2 folding chairs 5 black melamine tables with extensions 2 rectangular tables with Formica tabletops 10 benches made of brown plywood 1 FAUR built-in rotary convection oven, model: FM406N, No. 53028309 3 Boulanger ESSENTIELS microwave ovens, model: EG253B, 25 litres + 1 MILITTA electric kettle Set of desks comprising: 3 brown melamine desk-tables with metal legs, 3 tables and 3 chairs Set comprising: low cabinet, rack, table and miscellaneous computer equipment Set of desks comprising: 2 brown melamine desk-tables with metal legs, 4 chairs and one melamine desk Set of desks comprising: 2 brown melamine desk-tables with metal legs, 2 secretary s armchairs and chair Set of desks comprising: brown melamine desk-table with metal legs, 2 chairs and one melamine desk HM6 hangar HM5 office HM5 office HM5 office HM5 office HM5 office 477 200 478 300 Set of desks comprising: 3 brown melamine desk-tables with metal legs, executive chairs, 2 designer chairs and 3 chairs Set of desks comprising: melamine desk with glass tabletop and metal legs, 4 brown melamine tables with metal legs, secretary s armchair and 7 chairs HM5 office HM5 office 479 250 Set of desks comprising: black melamine desk, meeting table with 6 glass parts and metal legs, secretary s armchair, 7 chairs and HM5 office designer racks 480 100 COMPAIR air dryer, for parts TGBI room 481 200 Desk table with light brown melamine tabletops and metal legs, 16 folding tables, 17 visitor s chairs, ACER video projector and its remote control HM6 office 482 50 3 desk tables, with light brown melamine tabletops and metal legs, 2 executive chairs, armchair on casters and 2 visitor's armchairs HM6 office 483 70 Cleaning trolley HM6 hangar 21

GENERAL CONDITIONS OF SALE SALES PROCEDURE Article 1 The sale is public and shall be carried out by auction. Sale of each lot should be made to the highest bidder against payment in full. In the case of a double bid, the lot shall be put back in the sale and the public invited to bid again. Article 2 The auction shall take place in the order indicated in the catalogue. The auctioneer judicial reserves the right to deviate from the order of the catalogue, combine or divide lots, or withdraw lots put up for sale where they have not attained a suitable price, even when bids are higher than the opening. Article 3 The lots are sold in the state that they are in at the time of sale, without any guarantee or right of appeal. The buyer is deemed competent and aware of the lot status. Any photos or advertising material are not contractual. The dimensions, quantities and qualities appearing in the catalogue are for information only, and are not guaranteed. PAYMENT OF THE PRICE, FEES AND TAXES Article 4 Sale price is net of tax. The buyer shall pay, in addition to the sale price, buyer s fees of 12 %. To be effective, the payment, shall be made either: - in cash following the current regulations, maxi 1 000, - by certified check or by check accompanied imperatively by a banker s guarantee (see model attached), - by bank transfer (method of payment required for buyers outside France) The buyers outside France must pay the amount of the French VAT (20%) as deposit. This amount will be refunded on receipt of the transport document for the buyers from EU, and on receipt of the export document for the buyers outside EU. All bank fees are at the buyer s charge. TRANSFER OF OWNERSHIP AND GUARANTEES Article 5 Buyers are responsible for lots from the time they have been sold, but the transfer of ownership shall not be made until payment has been collected. As from the date of the sale, the seller shall not be held responsible for the partial or total disappearance of the lot sold or any damages which it may incur. REMOVAL OF AUCTIONED LOTS Article 6 Removal shall be made by the buyer within the period stated in the catalogue and/or at the time the lot was put up for sale. In the case where the buyer does not remove the lots within the time limit, the seller reserves the right to have them removed and stored at the expense of the buyer, without his engaging in any responsibility whatsoever as to the state or preservation of the lots in question. 22

Article 7 Unless stipulated otherwise, gaz pipes, water or steam lines as well as electric wires or any other joining to the adjudicated batch must be disconnected at the first connection, switch, valve or indication mark set by the seller onto the lines. Unless otherwise stated in the sale catalog, the successful tenderer will not have any proprietary right to the underground pipelines, elements incorporated into the masonry units or electric wires between transformers and the machines control panel. Article 8 In case of necessity to dismantle part of the factory structure to remove one or more adjudicated batches, the purchaser will be able to start the disassembling only after the agreement of the auctioneer and under the terms and conditions outlined in this agreement. A deposit related to the damage that may be caused to the building and its facilities will be asked the buyer. If such damage appeared, the deposit will be payable as a compensation for the damage repairs. If the deposit is insufficient to cover the damage caused onto the building, all the restoration costs will be assumed by the purchaser. In the absence of damage, the deposit is refunded to the buyer. RESTRICTIONS CONCERNING THE SALE OF CERTAIN EQUIPMENTS Article 9 Equipment are generally sold in conformity with technical specifications and according to French legal safety standards. This conformity is attested either by a seal of conformity (put into service after 01/15/81) or a CE seal (put into service after 01/15/93) and the certificate of compliance. 9.1 When the item for sale does not conform to technical specifications, or to French legal safety norms or regulations, it is reminded to buyers that this item must be imperatively refurbished in regards to the above norms and/or regulations during its installation and/or use after its auction. Buyers commit to refurbish the item in conformity with their enforceable norms and/or regulations. Items are sold as spare parts. 9.2 Machines which are non-compliant and not dangerous are sold as unfit for production. They may be sold in the condition as seen: 1 to an individual or legal entity where the material is not destined for use on the European Union. 2 to an individual or legal entity having the status of retailer, salvage dealer, re-manufacturer, scrap merchant, scrap metal dealer or collector who commits beforehand to be responsible for and to ensure conformity to required standards, for possible assignment to a client-operator. 3 to any buyer as a source of spare parts and who testifies, by accepting the general and particular conditions, not to use or assign the material for production. 9.3 Machines which are considered dangerous ((French) Decrees dated 5 March and 24 June 1993) and non-compliant may only be sold under categories 1 and 2 of the preceding article. 9.4 Buyers formally commit to respect the above criteria by accepting the general and particular conditions of sale. 9.5 The measures contained in articles 9.1 to 9.4 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. 23

Article 10 If the item for sale does not comply with the technical provisions, or to the applicable laws and regulations, this nonconformity and the related sales restrictions will be mentioned in the description of each item of the sale catalog and during the auction. Article 11 The measures contained in articles 9 to 10 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. OTHER CLAUSES Article 12 These conditions are deemed to be known and accepted without reservation by the buyer. Only the general conditions of sale written in the French language govern the sale; all translations are only indicative. * * * 24

MOBILIER DE BUREAU OFFICE FURNITURE LOTS N 451 À 465 Nombreux lots de mobilier de bureau Numerous batches of offi ce furniture Ce dépliant photos ne présente qu un échantillon des matériels proposés à la vente. POUR PLUS DE DÉTAILS, VEUILLEZ TÉLÉCHARGER LE CATALOGUE SUR NOTRE SITE www.lutece-industrie.com This photo fl yer only contains a survey of the objects to be auctioned. FOR MORE DETAILED INFORMATION, PLEASE DOWNLOAD THE CATALOGUE ON OUR WEBSITE www.lutece-industrie.com VISITES GERM VIEWING ASI MAINTENANCE 135 Avenue de Comminges 31270 CUGNAUX BELGIUM LUX. ASI MAINTENANCE 135 Avenue de Comminges 31270 CUGNAUX Lundi 27 Novembre 2017 de 10h00 à 18h00 FRANCE SWITZERLAND Monday, November 27 th 2017 from 10.00 a.m. to 6.00 p.m. CUGNAUX ANDORRA CONDITIONS DE VENTE : Les conditions générales de vente sont précisées au catalogue, notamment en ce qui concerne les restrictions sur la vente des matériels non conformes aux dispositions techniques ainsi qu aux normes de sécurité légales ou règlementaires françaises. Les lots concernés sont repérés par un astérisque dans le catalogue de vente. Le paiement des lots s effectue au comptant majoré du montant des frais 14,4% TTC. Paiement/ Bank details BNP PARIBAS - TOULOUSE Code Banque Code guichet N de compte Clé RIB 30004 00762 00010499929 63 IBAN FR76 3000 4007 6200 0104 9992 963 SWIFT BNPAFRPPTLS Lutèce Industrie R.C.S. Paris B 530 114 412 LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles Tél. : +33 (0)1 39 56 07 63 60, rue de Castagnary English and Spanish : +33 (0)7 81 58 50 40 75015 PARIS info@lutece-industrie.com

CARTE D ENREGISTREMENT REGISTRATION CARD Pour vous enregistrer, merci de nous remettre ce formulaire lors des visites ou avant la vente, avec votre carte de visite si possible et impérativement un chèque signé à l ordre du CPJ ou de la SVV. To be registered, please give us back this document during the visit or before the auction, with your business card if possible and auction being cash, to give bank guarantee. N ACHETEUR / BUYER SOCIÉTÉ / COMPANY : ADRESSE / ADRESS : CODE POSTAL / ZIP CODE : VILLE / TOWN : TÉLÉPHONE / PHONE : PAYS / COUNTRY : TÉLÉCOPIE / FAX : E-MAIL : N TVA INTRA. / VAT NUMBER - UNIQUEMENT POUR LES ACHETEURS ÉTRANGERS - NOM / LAST NAME : FONCTION / FUNCTION : GARANTIE BANCAIRE OUI / YES NON / NO BANK GARANTEE MOBILE : Montant / Amount : ESPÈCES / CASH OUI / YES NON / NO Montant / Amount : CHÈQUE / CHECK OUI / YES NON / NO DATE : SIGNATURE : CARTE BLEUE / CREDIT CARD OUI / YES NON / NO VIREMENT / BANK TRANSFER OUI / YES NON / NO LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles Tél. : +33 (0)1 39 56 07 63 60, rue de Castagnary - 75015 PARIS English and Spanish : +33 (0)7 81 58 50 40 www.lutece-industrie.com info@lutece-industrie.com