Air Cylinder Double Acting: ø/single Acting Spring Return: ø2., ø Variations Series Action Standard B Basic mm Double acting Single acting Single rod Single rod Spring return 2. Standard stroke,, 1,,,, 1, How to Order/Double Acting CJ1B U Cylinder standard stroke,, 1, Applicable tubing Tube material U mm mm Page 1.1-2 1.1- CJ1 CJP CJ2 CM2 C8 C76 CG1 MB MB1 CP9 C9 C92 CA1 CS1 Refer to p.1.1- and 1.1- for single acting style. 1.1-1
Air Cylinder/Double Acting ø Double acting/single rod Specifications Action Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Operating piston speed Cushion Thread tolerance Stroke tolerance Lubrication Double acting single rod Air 1.0MPa 0.7MPa 0.2MPa C to 70 C (Non-freezing) 0 to 00mm/s None JIS class 2 +0. 0 Basic style Not required (Non-lube) Compact series of double acting cylinders (A cylinder with a ø bore has been added as a compact style to the existing CJ2: ø6 double acting cylinder.) The fitting on the rod cover side has been provided with a variable piping direction. (The piping direction of the fitting on the rod cover side can move freely within a range of ± 90.) The piping direction of the fitting on the rod cover side varies within a range of ± 90. Model/Cylinder Bore /Standard Strokes Model CJ1B Applicable Tubing Tubing Metric size Theoretical Force Rod size 2 Action OUT IN Standard stroke,, 1, mm mm Piston area (mm 2 ) 12.6 9. 0.2 2.2 1.88 Model No. TU02 TS02 Operating pressure (MPa) 0.3 3.78 2.82 0..0 3.76 0. 6.30.70 0.6 7.6.6 (N) 0.7 8.82 6.8 Weight Cylinder stroke 1 Weight (g) 12.0 12. 12.8 13.2 Precaution Be sure to read before handling. Refer to p.0-39 to 0-2 for Safety Instructions and common precautions. Piping q Do not forcibly connect piping that could apply a lateral force to the cylinder tube, this could cause the cylinder tube to tilt and lead to a malfunction. 1.1-2 q Do not install by directly grasping the cylinder tube, as this could cause the tube to deform and lead to a malfunction. w Do not install by grasping the piston rod with a pair of electrician's pliers, as this could scratch the piston rod, which could damage the bearing or the rod seal. As a result, it could lead to a malfunction or air leakage.
Air Cylinder/Double Acting Construction CJ1 CJP CJ2 Dimensions: Double Acting/Basic style Component Parts No. q w e r t y u i o!0 Description Rod cover Cylinder tube Piston Seal retainer Fittings Rod seal Piston seal Tube gasket nut Rod end nut Stainless steel Body Gasket PVC Steel Steel Note Nickel plated Nickel plated CM2 C8 C76 CG1 MB MB1 CP9 C9 C92 CA1 CS1 Bore 18 Stroke 23 S 1 28 33 1 6 Z 1 61 66 1.1-3
Air Cylinder/Single Acting (Spring Return) ø2., ø How to Order/Single Acting CJ1B S U B Basic 2 mm Applicable tubing Tube material U mm mm Single acting/spring return Cylinder standard stroke ø2., ø,, 1, Single acting spring return Spring Retracting Force 2. Weight 2. (N) Extended position Retracted position 1.13 0.6 3.0 1.7 1. 3.7 2.6 1.6 Precautions (g) 6. Be sure to read before handling. Refer to p.0-39 to 0-2 for Safety Instructions and common precautions. Specifications Action Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Operating piston speed Cushion Thread tolerance Stroke tolerance Lubrication Model/Cylinder Bore /Standard Strokes Model CJ1B2 CJ1B Single acting spring return Air 1.0MPa 0.7MPa 0.3MPa to 70 C (Non-freezing) 0 to 00mm/s None JIS 2 class +0. 0 Basic style Not required (Non-lube) Standard stroke 2.,,, 1, Piping q Do not forcibly connect piping that could apply a lateral force to the cylinder tube, as this could cause the cylinder tube to tilt and lead to a malfunction. q Do not operate with a load applied to the piston rod during retraction. The spring that is built into the cylinder provides only enough force to retract the piston rod. Thus, if a load is applied, the piston rod will not be able to retract to the end of the stroke. w Do not install by grasping the cylinder tube, as this could cause the tube to deform and lead to a malfunction. 1.1- Applicable Tubing Tubing Metric size Theoretical Force 2. Rod size 1 2 Operating direction OUT IN OUT IN mm mm Piston area (mm 2 ).9 12.6 0.3 0.3 0.7 Model No. TU02 TS02 Operating pressure 0. 0.83 2.00 0. 1.32 0.6 3.26 1.7 0.6 1.81.2 (N) 0.7 2.30.78
Air Cylinder/Single Acting (Spring Return) Construction CJ1B2- SU CJ1B- SU CJ1 CJP Dimentions: Basic style Component Parts No. q w e r t y u Description Rod cover Cylinder tube Piston rod Spring Piston seal nut Rod end nut Stainless steel Stainless steel wire Steel (Impossible to disassemble) Note Black zinc chromate CJ2 CM2 C8 C76 CG1 MB : ø2./cj1b2- SU MB1 CP9 C9 C92 CA1 CS1 Bore 2. Stroke 16. S 2. 29 Z 38 : ø/cj1b- SU Bore Stroke 19. 28. S 1 37. 6. 0 9 Z 1 8 67 1.1-
1.1-6