Application: Blow Moulding Machines Market: Plastic Machinery Branch: Blow Moulding Machines CC-Code: A2111 Blow oulding achine for the production of bottles and containers for the food-/pharaceutic-/cheical-industry. Our sensors are used for four different controls: the parison thickness the ould claping the carriage oveent the nozzle position The sensors control the thickness of the parison, the plate position, the ould closing oveent and the blow pin oveent inside the for. Teposonics SSI is the best solution for high dynaics closed loop controls Accuracy & high speed! RP (different lengths) Output: SSI
Application: Wood panel Lock tools syste Market: Woodworking achinery Branch: Autoatic panel boring achine CC-Code: A 1513 The oveent of the vacuu tools (Y axis) is realized with a single belt, oved fro and electrical otor and friction syste for each one tool; for each one tool there is a pinion track and an electrical friction, it is only possible ove a single tool through the friction; it is ipossible to use the increental encoder connect to the otor you lost the previous position, they needs a position transducer for each one tools, our ultiagnets transducer could be the solution. Vacuu tool Y Axis Y1 (agnet 1) Y2 (agnet 2) Y3 (agnet 3) Wood panels Y4 (agnet 4) X Axis X1 axis X2 axis X3 axis X4 axis X5 axis
Application: Wood panel Lock tools syste Market: Woodworking achinery Branch: Autoatic panel boring achine CC-Code: A 1513 The boring achine (single & ulti spindle) are use to drill the wood panel for the furniture industry. The boring achine have soe different lock lines to block the wood panel, in each one line there are soe vacuu tools to lock the panel, typically 4 pc.s each one line but could be ax. 10 (depends fro the anufature). Actually the oveent of the vacuu tools (Y axis) is anually, there is a request to autoatic the oveent, the X axis are an electrical axis position check with agnetic band (satisfied results). Y axis X axis
Application: Closed Loop Control Market: Plastic Thero Process CC-Code: A2121 Branch: Calender for Plastics Closed loop control for accurate control of the rolls gap, Direct control inside the cylinder High perforance High resolution 2 icrons High quality products! Teposonics RD Stroke: 100 Output: SSI Resolution: 2 icrons
Application: Wood panel Lock tools syste Market: Woodworking achinery Branch: Autoatic panel boring achine CC-Code: A 1513 agnetostrictive transducer Y1 (agnet 1) Y2 (agnet 2) Y3 (agnet 3) Y4 (agnet 4) Advantage agnetostrictive transducer Vs. agnetic band easy to install, absolute output, not require connection between agnet and electronic unit, price higher but interesting with 4 agnets, ore agnets ore advantage agnetic band X axis Application description : X axis => agnetic band with indicator each one head, stroke ax. 6.000. (long stroke not interesting on agnetostrictive sensor, ipossible to replace) Y axis => actually anual oveent, ipossible use encoder difficult to use agnetic band, interested on ultiagnet solution, accuracy request 0,1. the nuber of the agnets and the stroke depends fro the anufacture the transducers type (interface) depends fro the controller (ax. stroke 2.000, ax 10 vacuu, typical 4) Actually they have only anually position, for the autoatic they are interested on 2 different solution : EP2 Start/Stop output - RP or RA (depends fro the echanical solution) Can Open output Potential of the italian arket : at least 4.000 pc.s for the high technological achine (wood working) Idea to verify : this solution could be interesting for flat glass and arble achinery
Application: Veerner Peeling Machines Control Market: Woodworking Machinery Branch: Machines for Splitting up Chipless Dividing CC-Code: A 1510 The sensors are built inside different hydraulic cylinders. On each achine there are ore than 10 sensors. Purpose: Reliable and accurate control of the achine functions. high accuracy high reliability Minial clipping due to the precise boles easureent. 6 3 RH - SSI
Application: Transfer Machines Market: Machine Tools and Manufacturing Systes CC-Code: A 1015 Branch: Other Metalworking Machines The copany produces transfer achines for etal working. Every achine has 8-10 hydraulic axis. Our sensors are used to control the position of the hydraulic cylinders, responsible for the oveent of the tools, which thread and drill the etal. As the transducers can not be ounted inside the cylinders, they are installed outside and in parallel to the. High accuracy (0,01.) Absolute position syste High protection against water dust IP 65 is OK RP-M-0250M-D62-1-C101221 (for new achines), custoized CNC RA-M-0250M-D70-1-S2G1100 (for retrofitting old achines), Sieens CNC
Application: Theroforing Machinery Market: Machinery for Plastics & Rubber Branch: Theroforing Machines CC-Code: A 2113 The sensors are used to control different horizontal and vertical axis. Replaceent of pots and encoders Absolute easureent High reliability Contactless control 4 pcs. RPS different lengths with Profibus output 5 pcs. EPS different lengths with 0 10 V 1 pc. RPS2500 0 10 V, 2 positions
Application: Plunger Speed Control Market: Metalworking Machinery CC-Code: A 1070 Branch: Excentric Presses Mechanical press. Our transducer RP has position and velocity output and is used to control the speed of the plunger. Through the CANbus protocol they use the speed output directly. The EP-K sensor controls the position of the achine feeder, responsible of the oveent of the load/unload syste. Absolute signal, high resistance on vibration and dust (reliability), Speed output include on CANbus protocol. RP with CANbus position + velocity output EP-K with analog voltage output Products (brass)
Application: Linear Drive Market: Control Systes, Systes Integrators CC-Code: A 3610 Branch: Control Systes Manufacturer The custoer developed a direct drive where the winding is fitted on a firly ounted stator in the for of a long stator syste. The agnetic conductor plate is considerably shorter and slides guided with rollers over the horizontal inductor. The speed curve of the traveling agnetic field and of the agnet plate is synchronous over the segented displaceent of axiu 1,800 length. With an overall height of only 20, the flat otor can be integrated easily into the user s achine concept. A frequency inverter connected to the supervisory coputer and a agnetostrictive easureent syste coplete the linear otor into a precision-controlled drive. The inverter corresponds to a standard controller and energizes the otor windings with a frequency of 300 800 Hz and a voltage of 0 28 Vac at an input voltage of 60 Vdc. For position feedback, a rod-shaped sensor is ounted firly with the sensor tube in parallel to the long stator. The only obile part of the easureent syste is the obile carrier to which a sall peranent agnet is fitted. It transits the position of the conductor plate through the wall of the tube. Syste-specific apertures in the easureent syste are copletely unnecessary. Benifits: Absolute easureent. High resolution and repeatability Best resistance to noise (Very low noise and jitter????) Data Processor Power Supply Frequency Converter Quick and safe connection to the syste. No cable drag chain No recalibration: the drive is always ready for operation High update tie & data speed Actual Value Carriage Long Stator RH-M-2000M-D60-1-S2G8102 Position Sensor Position Magnet