4 5 1 2 6 8 7 3 92
1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD. 160-200-270 Standard polyester powder coated Upon request nickel - plated for corrosive environments Standard treatment phosphated High resistance and reliability Spring sets to suit different air pressure/torque requirements Long securing screws to allow safe dismantling for maintenance Same body dimensions for D/SR versions Stainless steel as standard Top of pinion according to Namur norm Solenoid valve connection according to Namur norm Bottom of pinion according to ISO 5211-DIN 3337 4 5 6 7 8 Nickel-plated for standard version against internal and external corrosion Stainless steel for corrosive environments nti-blow out design LUMINUM UNI 6060: Good wear resistance High corrosion resistance and long life Large contact area Low friction for self lubricating material Long life NBR standard version Viton high temperature version SILICON low temperature version Chemical nickel plating upon request Constant torque output Compact design Balanced internal forces Robust design to ensure long life NTI-BLOWOUT SYSTEM MOUNTING VRITIONS Closed Open Piston provided with Counterclockwise Rotation Clockwise Rotation Top view 93
CTUTOR PRTS MOD. 32 6 7 8 15 14 16 12 9 13 15 8 7 5 11 11 10 4 1 9 10 12 16 2 3 ITEM DESCRIPTION MTERIL TRETMENT Q.TY 1 Body Extruded aluminium Hard anodized 1 2 nti-blowout pinion Steel Nickel plated 1 3 Lower pinion o-ring NBR 1 4 Top pinion o-ring NBR 1 5 Spacer ring POM 1 6 Pinion snap ring Steel Nickel plated 1 7 Piston Die cast aluminium 2 8 Piston o-ring NBR 2 9 Stop bolt Stainless steel 2 10 Stop bolt o-ring NBR 2 11 Washer Stainless steel 2 12 Stop bolt retaining nut Stainless steel 2 13 Left end cap Die cast aluminium Painted 1 14 Right end cap Die cast aluminium Painted 1 15 End cap seats NBR 2 16 Stainless steel 8 94
CTUTOR PRTS MOD. FROM 52 TO 140 17 18 14 7 6 11 9 10 8 11 12 13 21 20 22 13 12 16 15 14 21 5 4 1 18 17 22 19 2 3 ITEM DESCRIPTION MTERIL TRETMENT 1 Body Extruded aluminium Hard anodized 1 1 2 nti-blowout pinion Steel Nickel plated 1 1 3 Lower pinion o-ring NBR 1 1 4 Pinion spacer ring POM 1 1 5 Top pinion o-ring NBR 1 1 6 Cam spacer ring POM 1 1 7 Cam Stainless steel 1 1 8 Position indicator Nylon 2 2 9 Pinion washer Stainless steel 1 1 ** 10 Pinion snap ring Steel Nickel plated 1 1 11 Piston Die cast aluminium 2 2 12 Piston o-ring NBR 2 2 13 nti-friction ring POM 2 2 14 Piston thrust block POM 2 2 15 Stop bolt retaining nut Stainless steel 2 2 16 Stop bolt Stainless steel 2 2 17 External spring Steel Zinc-phosphate 0 18 Internal spring Steel Zinc-phosphate 0 19 Left end cap Die cast aluminium Painted 1 1 20 Right end cap Die cast aluminium Painted 1 1 21 End cap seats NBR 2 2 22 Stainless steel 8 8 Q.TY D Q.TY SR See spring setting at page 101 95
CTUTOR PRTS MOD. FROM 160-200 -270 5 6 6 5 ONLY MOD. 270 25 4 15 12 13 16 11 10 17 20 18 1 7 21 8 9 4 2 3 22 14 19 2 3 24 23 19 27 26 28 30 31 29 ITEM DESCRIPTION MTERIL TRETMENT 1 Body Extruded aluminium Hard anodized 1 1 2 nti-blowout pinion Steel Nickel plated 1 1 3 Lower pinion o-ring NBR 1 1 4 Top pinion o-ring NBR 1 1 5 Pinion spacer ring POM 1 1 6 Pinion snap ring Steel Nickel plated 1 1 7 Piston Die cast aluminium 2 2 8 Piston o-ring NBR 2 2 9 nti-friction ring 2 2 10 Piston thrust block POM 4 6 4 6 11 Stop bolt o-ring NBR 2 2 12 Washer Stainless steel 2 2 13 Stop bolt retaining nut Stainless steel 2 2 14 Stop bolt Stainless steel 2 2 15 External spring Steel Zinc-phosphate 0 16 Central spring Steel Zinc-phosphate 0 17 Intenal spring Steel Zinc-phosphate 0 18 Left end cap Die cast aluminium Painted 1 1 19 Right end cap Die cast aluminium Painted 1 1 20 Stainless steel 8 12 8 12 21 End cap o-ring NBR 2 2 22 NBR 2 2 23 *** Precompressed spring Steel Zinc-phosphate 0 24 *** nti-friction ring 1 1 25 *** Pinion washer Stainless steel 1 1 26 Plate GGG40 Painted 1 1 27 Coupling Steel Nickel plated 1 1 28 nti-friction ring PTFE 1 1 29 Stop screw Steel Zinc plated 1 1 30 Stop bolt retaining nut Stainless steel 1 1 31 Fixing screws Stainless steel 4 4 6 12 *** Valid for mod. 270 only Q.TY D Q.TY SR See spring setting at page 79 See spring setting at page 101 96
DIMENSIONS FROM MOD. 52 TO 140 P CH S J M6 H 0.47 R Q Ø K 0.16 0.16 B M = = T O 16 U N E F G 16 0.47 0.47 = L = = = N 4 holes M5 C D B N 4 holes 10/24 UNC 2B Ø I * V * ** For mod. from 52 to 100 Upon request F04 CCW rotation B CW rotation MOD. DRILLING ISO 5211 52 ** F03 - F05 0.43 5.49 2.80 1.18 1.61 2.74 0.79 3.52 0.35 1.65 0.24 0.47 3.15 1.18 0.47 1.04 1.97 1.42 CH B C D E F G H ØI ØK L M N O P Q R S T U V 63 F05 - F07 0.55 6.38 3.17 1.40 1.77 3.17 0.79 3.96 0.43 1.89 0.24 0.59 3.15 1.18 0.63 1.08 2.76 1.97 75 F05 - F07 0.67 8.15 3.72 1.65 2.07 3.82 0.79 4.61 0.51 2.40 0.18 0.75 3.15 1.18 0.75 1.38 2.76 1.97 85 F05 - F07 0.67 9.35 4.17 1.87 2.30 4.27 0.79 5.06 0.59 2.40 0.18 0.87 3.15 1.18 0.75 1.65 2.76 1.97 100 F07 - F10 0.67 10.69 4.84 2.17 2.68 4.78 0.79 5.57 0.59 2.40 0.18 0.87 3.15 1.18 0.81 1.97 4.02 2.76 115 F07 - F10 0.87 12.91 5.39 2.52 2.87 5.57 1.18 6.75 0.87 3.31 0.30 1.26 5.12 1.18 0.94 1.97 4.02 2.76 125 F07 - F10 0.87 14.41 5.83 2.68 3.15 6.04 1.18 7.22 0.87 3.31 0.30 1.26 5.12 1.18 0.94 2.40 4.02 2.76 140 F10 - F12 1.06 16.85 6.46 3.01 3.44 6.93 1.18 8.11 0.94 3.46 0.28 1.38 5.12 1.18 1.14 2.80 4.92 4.02 10-24 UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC NPT 1/4-20 UNC 0.35 1.50 5/16-18 UNC 0.35 1.61 5/16-18 UNC 0.41 1.97 5/16-18 UNC 0.41 1.97 3/8-16 UNC 0.41 1.97 3/8-16 UNC 0.63-3/8-16 UNC 0.63-1/2-13UNC 0.63-97
DIMENSIONS MOD. 32-160 - 200-270 MOD. DRILLING ISO 5211 CH B C D E F G H I L M N O P ØQ R S T U V W 32 F03 0.35 4.33 1.77 0.89 0.89 2.56 1.77 0.39 1.97-1.42 160 F10 - F12 1.06 20.55 7.36 3.43 3.94 8.58 7.40 1.18 3.15 5.12 4.92 200 F14 1.42 22.64 8.58 4.29 4.29 10.59 9.41 1.42 3.15 5.12 5.51 270 F16 ** 1.81 26.46 11.42 5.71 5.71 14.21 13.03 1.42 3.15 5.12 6.50 ** 10-24 UNC 1/2-13 UNC 5/8-11 UNC - - 0.47 0.46 - - - - - 3/8-16 UNC 4.02 1.26 1.38 3.21 6.30 1.77 2.20 2.50 - - 1.54 1.97 3.46 7.48 2.03 2.52 3.11 3/4-10 UNC - - 2.05 1.97 4.76 9.06 2.68 3.11 4.37 U NPT T V W 98
DIMENSION 180 DOUBLE CTING CTUTORS DIMENSIONS MOD. 52 160 MOD. DRILLING ISO 5211 52 F03 ** - F05 0.43 7.72 2.80 1.18 1.61 2.74 0.79 3.52 0.35 1.65 3.15 1.18 0.47 1.04 1.97 1.42 CH B C D E F G H ØI L M N O P Q R S T U V W 63 F05 - F07 0.55 9.09 3.17 1.40 1.77 3.17 0.79 3.96 0.43 1.89 3.15 1.18 0.63 1.08 2.76 1.97 75 F05 - F07 0.67 11.61 3.72 1.65 2.07 3.82 0.79 4.61 0.51 2.40 3.15 1.18 0.75 1.38 2.76 1.97 85 F05 - F07 0.67 13.31 4.17 1.87 2.30 4.27 0.79 5.06 0.59 2.40 3.15 1.18 0.75 1.65 2.76 1.97 100 F07 - F10 0.67 15.12 4.84 2.17 2.68 4.78 0.79 5.57 0.59 2.40 3.15 1.18 0.81 1.97 4.02 2.76 115 F07 - F10 0.87 18.58 5.39 2.52 2.87 5.57 1.18 6.75 0.87 3.31 5.12 1.18 0.94 1.97 4.02 2.76 125 F07 - F10 0.87 20.93 5.83 2.68 3.15 6.04 1.18 7.22 0.87 3.31 5.12 1.18 0.94 2.40 4.02 2.76 140 F10 - F12 1.06 23.66 6.46 3.01 3.44 6.93 1.18 8.11 0.94 3.46 5.12 1.18 1.14 2.80 4.92 4.02 3.15 160 F10 - F12 1.06 26.22 7.36 3.43 3.94 7.40 1.18 8.58 1.18-5.12 *** 1.18 1.26 3.21 4.92 4.02 *** 10-24 UNC 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 UNC NPT 1/4-20 UNC 0.35 1.50 0.24 5/16-18 UNC 0.35 1.61 0.24 5/16-18 UNC 0.41 1.97 0.18 5/16-18 UNC 0.41 1.97 0.18 3/8-16 UNC 0.41 1.97 0.18 3/8-16 UNC 0.63-0.30 3/8-16 UNC 0.63-0.30 1/2-13UNC 0.63-0.28 1/2-13UNC - - - 99
DOUBLE CTING CTUTOR Top view -5 0 +5 90 90 85 95 85 0 +5-5 With reference to the above diagram it can be noted that the torque of a double acting actuator remains constant through-out the complete action. the one obtained. TYPE IR SUPPLY PRESSURE (psi) 40 50 60 70 80 90 100 115 TORQUE OUTPUT DOUBLE CTING CTUTORS (in-lbs) D 32 34 43 55 64 71 82 87 101 D 52 86 110 133 156 179 203 226 261 D 63 154 196 238 280 321 363 405 468 D 75 284 360 435 511 586 661 737 850 D 85 408 518 629 740 851 962 1072 1238 D 100 646 818 991 1163 1336 1508 1681 1939 D 115 1070 1355 1640 1925 2210 2495 2780 3208 D 125 1409 1783 2157 2532 2906 3280 3654 4216 D 140 2009 2511 3013 3515 4018 4513 5015 5772 D 160 2930 3662 4394 5127 5859 6591 7324 8422 D 200 5488 6866 8239 9612 10981 12359 13732 15792 D 270 12734 15919 19097 22284 25469 28654 31832 36611 100
SPRING RETURN CTUTOR Top view MD MMC MC MMD -5 0 +5 90 90 85 95 85 0 +5-5 With reference to the above diagram the torque of a spring return actuator is not constant but decreasing. This is due to the action of the springs that when compressed during air actuation counteract the piston movement and accumulate energy which will be available in a decreasing way during the rotation inversion. Opening rotation Closing rotation 3. Once the torque value suggested is obtained consult the torque chart and in rela account of the lower value between the MMD and MC values. VLID FROM MOD. 52 TO MOD. 140 SPRING SETTING VLID FOR MOD. 160 ND 200 SPRING SETTING VLID FOR MOD. 270 SPRING SETTING PRETENSIONED SPRING SET EXTERNL SPRING INTERNL SPRING 01 1 1 02 2 / 03 1 2 04 2 1 05 2 2 SET EXTERNL SPRING CENTRL SPRING INTERNL SPRING 01 / 2 / 02 2 / / 03 1 2 / 04 2 / 2 05 2 2 / 06 2 2 2 SET 01 2/3 02 3/3 03 3/4 04 4/4 05 4/5 06 5/5 07 5/6 08 6/6 101
TORQUE OUTPUT SR CTUTORS MOD. SR52 SR63 SR75 SR85 SR100 SR115 SR125 SR140 SR160 SR200 SR270 SET SPRING TORQUE (in-lbs) MMD MMC MD MC MD MC MD MC IR SUPPLY PRESSURE (psi) 40 50 60 70 80 90 100 115 TORQUE OUTPUT SPRING RETURN CTUTORS (in-lbs) MD 01 32 44 48 23 72 47 95 70 02 42 59 61 31 84 54 108 77 03 46 66 80 47 104 70 127 94 150 117 04 57 82 70 31 93 55 116 78 140 101 163 125 05 72 105 78 32 101 55 125 78 148 102 183 137 01 44 85 92 38 134 80 176 122 02 58 109 120 56 162 98 204 140 03 71 128 149 79 191 121 233 162 275 204 04 85 152 136 54 177 96 219 138 261 180 303 222 05 111 196 151 53 193 95 235 136 276 178 339 241 01 89 172 168 63 244 138 319 214 02 118 226 215 85 291 160 366 235 03 133 249 275 137 351 212 426 288 502 363 04 162 303 247 83 322 158 398 234 473 309 549 385 05 205 380 279 81 354 157 430 232 505 308 618 421 01 143 242 238 109 349 219 460 330 02 176 298 316 163 427 274 537 384 03 215 361 387 211 498 322 609 432 720 543 04 248 417 354 155 465 265 576 376 687 487 797 633 05 321 536 392 146 503 257 614 368 725 478 891 645 01 218 395 384 154 556 326 728 499 02 288 521 485 199 658 372 830 544 03 318 564 628 329 801 502 973 674 1146 847 04 389 691 558 203 730 375 903 548 1075 720 1248 893 05 489 860 630 206 802 378 975 551 1147 723 1406 982 01 363 658 650 270 935 555 1220 840 02 449 835 848 378 1133 663 1419 949 03 538 957 1044 541 1329 827 1615 1112 1900 1397 04 625 1133 958 365 1243 650 1528 935 1813 1220 2098 1505 05 800 1432 1067 352 1352 637 1638 922 1923 1207 2350 1635 01 470 877 850 328 1224 703 1599 1077 02 560 1040 1135 539 1509 914 1883 1288 03 718 1313 1351 640 1725 1015 2099 1389 2474 1763 04 808 1477 1261 477 1636 851 2010 1226 2384 1600 2758 1974 05 1055 1913 1388 415 1762 789 2136 1164 2511 1538 3072 2099 01 726 1346 1240 508 1742 1010 2244 1512 02 815 1523 1642 821 2144 1323 2646 1825 03 1036 1958 1910 856 2412 1358 2914 1861 3408 2355 04 1134 2126 1810 668 2312 1170 2814 1672 3308 2166 3810 2668 05 1453 2728 1979 515 2481 1017 2975 1511 3477 2013 4233 2769 01 885 1345 1921 1390 2644 2140 02 1301 1991 2228 1503 2952 2217 03 1531 2336 1980 1131 2713 1854 3419 2569 04 1770 2841 2447 1350 3162 2074 3886 2779 05 2230 3327 2737 1507 3452 2240 4175 2963 06 2655 4186 2983 1443 3715 2167 4421 2828 5475 3865 01 1540 2168 3718 2904 5069 4317 02 2186 3150 4414 3308 5770 4681 03 2637 3752 3936 2591 5301 4035 6639 5400 04 3124 4699 4788 3080 6126 4445 7486 5795 05 3726 5327 5453 3613 6822 5008 8182 6385 06 4664 6867 5893 3539 7288 4925 8591 6175 10562 8137 01 4469 6973 8574 6017 11883 9317 15309 12743 02 5363 8372 7619 4548 10928 7857 14353 11283 03 6257 9761 6672 3088 9972 6388 13398 9814 16824 13240 04 7150 11159 5716 1619 9016 4928 12442 8353 15877 11779 19177 15080 05 8044 12549 8069 3459 11495 6884 14921 10310 18221 13619 21530 16920 06 8938 13947 10539 5415 13965 8850 17274 12150 20574 15459 07 9832 15336 9584 3955 13009 7381 16319 10681 19619 13990 23053 17416 08 10735 16735 8637 2486 12063 5912 15363 9221 18672 12521 22098 15947 27115 20965 MC MD MC MD MC MD MC MD MC 102
TECHNICL DT TYPE MODEL WORKING TIME (sec.) 32 52 63 75 85 100 115 125 140 160 200 270 COUNTERCLOCKWISE ROTTION (D) CCW 0.03 0.03 0.06 0.12 0.20 0.30 0.53 0.83 0.98 1.15 1.74 4.50 CLOCKWISE ROTTION (D) CW 0.03 0.04 0.08 0.12 0.19 0.27 0.47 0.66 0.93 1.10 1.70 4.50 COUNTERCLOCKWISE ROTTION (SR) CCW - 0.09 0.14 0.22 0.31 0.44 0.83 1.08 1.27 1.75 2.38 6.20 CLOCKWISE ROTTION (SR) CW - 0.09 0.14 0.22 0.33 0.46 0.78 0.90 0.97 1.34 2.19 4.50 COUNTERCLOCKWISE ROTTION (D) CCW - 0.05 0.11 0.26 0.30 0.48 0.91 1.94 2.12 2.63 - - CLOCKWISE ROTTION (D) CW - 0.04 0.13 0.19 0.30 0.49 0.92 1.17 1.45 1.99 - - pproximative times obtained at the pressure of 87 PSI without valve TYPE MODEL WEIGHT CHRT (Lbs) 32 52 63 75 85 100 115 125 140 160 200 270 1.08 2.25 3.26 5.51 7.39 11.02 17.75 22.09 33.86 43.21 70.99 154.00-2.62 3.97 6.94 9.37 14.40 23.92 26.76 45.28 65.04 111.00 192.79-3.42 5.07 8.53 11.53 17.44 27.34 35.27 47.40 60.63 - - CTUTOR IR CONSUMPTION CHRT (in cubic inches per stroke) TYPE MODEL 32 52 63 75 85 100 115 125 140 160 200 270 CCW 2.44 6.10 11.60 21.97 31.12 48.21 78.72 99.47 137.91 220.30 347.84 915.36 COUNTERCLOCKWISE ROTTION (D) CLOCKWISE ROTTION (D) CW 1.83 7.93 14.04 26.85 39.06 61.02 104.35 134.86 192.84 290.47 599.86 1086.22 CLOCKWISE ROTTION (SR) CW - 6.71 11.60 21.97 32.34 48.82 84.21 108.62 146.46 214.8 462.56 945.87 COUNTERCLOCKWISE ROTTION (D) CCW - 10.37 20.14 36.60 54.92 83.60 129.98 176.97 299.02 329.53 - - CLOCKWISE ROTTION (D) CW - 9.76 17.70 34.17 50.65 80.55 137.30 183.07 237.99 354.55 - - 103
OPERTING CONDITIONS: FLUID H2O - T 68 F - CTUTOR P 90 100 PSI SERIES 8P0080-8P0135 8P0082-8P0136 rt. 8P0080-8P00135 (to 1/4 from 2 ) VLVE WITH DOUBLE CTING CTUTOR PSI 600 600 600 600 600 600 600 600 600 600 600 DN B 4.50 4.50 4.50 4.71 5.32 5.64 7.48 8.20 9.70 10.49 12.92 C 3.84 3.84 3.84 3.92 4.35 4.49 6.04 6.40 7.44 7.81 9.65 D 1.77 1.77 1.77 1.77 1.77 1.77 2.80 2.80 3.17 3.17 4.17 E 2.64 2.64 2.64 3.00 3.35 3.66 4.13 4.80 6.10 6.89 8.03 F 4.33 4.33 4.33 4.33 4.33 4.33 5.49 5.49 6.38 6.38 9.35 CT. D 32 D 32 D 32 D 32 D 32 D 32 D 52 D 52 D 63 D 63 D 85 rt. 8P0082-8P00136 (to 1/4 from 2 ) VLVE WITH SPRING RETURN CTUTOR PSI 600 600 600 600 600 600 600 600 600 600 600 DN B 5.46 5.46 5.46 5.67 6.28 6.60 7.92 8.64 10.80 11.59 13.43 C 4.80 4.80 4.80 4.88 5.31 5.45 6.48 6.84 8.54 8.91 10.16 D 2.80 2.80 2.80 2.80 2.80 2.80 3.17 3.17 4.17 4.17 4.84 E 2.64 2.64 2.64 3.00 3.35 3.66 4.13 4.80 6.10 6.89 8.03 F 5.49 5.46 5.49 5.49 5.49 5.49 6.38 6.38 9.35 9.35 10.69 CT. SR 52 SR 52 SR 52 SR 52 SR 52 SR 52 SR 63 SR 63 SR 85 SR 85 SR 100 SERIES 8P0133-8P0134 rt. 8P0133 VLVE WITH DOUBLE CTING CTUTOR PSI 1000 1000 1000 1000 1000 1000 DN B 4.52 4.74 5.33 5.72 7.52 8.27 C 3.84 3.92 4.31 4.45 6.00 6.36 D 1.77 1.77 1.77 1.77 2.80 2.80 E 2.64 3.07 3.54 3.94 4.41 5.32 F 4.33 4.33 4.33 4.33 5.49 5.49 CT. D 32 D 32 D 32 D 32 D 52 D 52 rt. 8P0134 VLVE WITH SPRING RETURN CTUTOR PSI 1000 1000 1000 1000 1000 1000 DN B 5.48 5.70 6.29 6.68 7.96 8.71 C 4.80 4.88 5.27 5.41 6.44 6.80 D 2.80 2.80 2.80 2.80 3.17 3.17 E 2.64 3.07 3.54 3.94 4.41 5.32 F 5.49 5.49 5.49 5.49 6.38 6.38 CT. SR 52 SR 52 SR 52 SR 52 SR 63 SR 63 104
OPERTING CONDITIONS: FLUID H2O - T 68 F - CTUTOR P 90 100 PSI SERIES 8P0129(T)-8P0131(T) 8P0130(L)-8P0132(L) rt. 8P00129 (T)-8P00130 (L) VLVE WITH DOUBLE CTING CTUTOR PSI 400 400 400 400 400 400 400 400 400 400 DN B 4.43 4.43 4.43 4.12 6.10 6.55 7.28 8.55 9.50 9.54 C 3.76 3.76 3.76 3.85 5.15 5.37 5.86 6.86 7.31 7.31 D 1.77 1.77 1.77 1.77 2.80 2.80 2.80 3.17 3.17 3.17 E 2.64 2.64 2.87 3.19 3.74 4.39 4.86 5.73 6.93 7.08 F 4.33 4.33 4.33 4.33 5.49 5.49 5.49 6.38 6.38 6.38 G 1.32 1.32 1.44 1.60 1.87 2.20 2.43 2.87 3.47 3.54 CT. D 32 D 32 D 32 D 32 D 52 D 52 D 52 D 63 D 63 D 63 rt. 8P0131 (T)-8P0132(L) VLVE WITH SPRING RETURN CTUTOR PSI 400 400 400 400 400 400 400 400 400 400 DN B 5.39 5.39 5.39 5.58 6.54 6.99 7.72 9.65 10.60 10.64 C 4.72 4.72 4.72 4.81 5.59 5.81 6.30 7.96 8.41 8.41 D 2.80 2.80 2.80 2.80 3.17 3.17 3.17 4.17 4.17 4.17 E 2.64 2.64 2.87 3.19 3.74 4.39 4.86 5.73 6.93 7.08 F 5.49 5.49 5.49 5.49 6.38 6.38 6.38 9.35 9.35 9.35 G 1.32 1.32 1.44 1.60 1.87 2.20 2.43 2.87 3.47 3.54 CT. SR 52 SR 52 SR 52 SR 52 SR 63 SR 63 SR 63 SR 85 SR 85 SR 85 SERIES 8P0139(T)-8P0141(T) 8P0140(L)-8P0142(L) 8P0143(T)-8P0145(T) 8P0144(L)-8P0146(L) = F = D rt. 8P0139-8P0140 Standard port rt. 8P0143-8P0144 Full port FULL PORT STNDRD PORT VLVE WITH DOUBLE CTING CTUTOR PSI 1000 1000 1000 1000 1000 800 800 800 DN DN - - B 5.75 5.75 6.08 6.71 7.47 8.62 9.82 11.56 C 4.97 4.97 5.17 5.61 6.14 7.09 7.94 9.20 D 2.80 2.80 2.80 3.17 3.17 3.72 4.17 4.84 E 2.83 2.83 3.26 3.89 4.40 4.92 5.86 6.85 F 5.49 5.49 5.49 6.38 6.38 8.15 9.35 10.69 G 1.41 1.41 1.63 1.94 2.20 2.46 2.93 3.42 CT. D 52 D 52 D 52 D 63 D 63 D 75 D 85 D 100 rt. 8P0141-8P0142 Standard port rt. 8P0145-8P0146 Full port VLVE WITH SPRING RETURN CTUTOR PSI 1000 1000 1000 1000 1000 800 800 800 = E = G C B FULL PORT STNDRD PORT DN DN - - B 6.17 6.19 6.52 7.36 8.12 9.58 10.33 13.21 C 5.41 5.41 5.61 6.26 6.79 8.05 8.45 10.85 D 3.17 3.17 3.17 3.72 3.72 4.84 4.84 5.83 E 2.83 2.83 3.26 3.89 4.40 4.92 5.86 6.85 F 6.38 6.38 6.38 8.15 8.15 10.69 10.69 14.41 G 1.41 1.41 1.63 1.94 2.20 2.46 2.93 3.42 CT. SR 63 SR 63 SR 63 SR 75 SR 75 SR 100 SR 100 SR 125 105
BONOMI NORTH MERIC SERIES D500S SR500S rt. D500S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE 9.23 9.86 10.41 11.09 12.48 13.40 14.47 16.99 19.61 21.85 B 12.20 13.01 13.91 14.83 16.97 18.40 19.94 23.88 27.60 31.38 C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 2.80 2.80 2.80 3.17 3.72 4.17 4.84 5.39 6.46 7.36 E 1.61 1.65 1.7 1.78 2.05 2.14 2.19 2.38 2.58 3.03 F 5.49 5.49 5.49 6.38 8.15 9.35 10.69 12.91 16.85 20.55 4 4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 1.67 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 7.00 7.7 9.3 11.7 16.3 22.8 28.2 46.9 76.1 114.7 VLBI rt. SR500S VLVE WITH SPRING RETURN CTUTOR CT. SR 75 SR 75 SR 75 SR 85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE 10.32 10.95 11.50 12.19 13.44 15.09 1701 18.82 22.09 - B 13.29 14.10 15.00 15.93 17.93 20.09 22.48 25.71 30.08 - C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 3.72 3.72 3.72 4.17 4.84 5.39 6.46 7.36 8.58 - E 1.61 1.65 1.76 1.78 2.05 2.14 2.19 2.38 2.58 - F 8.15 8.15 8.15 9.35 10.69 12.91 16.85 20.55 22.64-4 4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 1.67 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 11.7 12.4 14.00 17.7 25.2 39.3 62.5 94.1 153 - * Consult factory SERIES D500N SR500N rt. D500N VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE 9.86 10.41 11.09 12.48 13.40 14.47 16.99 19.61 21.85 B 13.01 13.91 14.83 16.97 18.40 19.94 23.88 27.60 31.38 C 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 2.80 2.80 3.17 3.72 4.17 4.84 5.39 6.46 7.36 E 1.65 1.7 1.78 2.05 2.14 2.19 2.38 2.58 3.03 F 5.49 5.49 6.38 8.15 9.35 10.69 12.91 16.85 20.55 4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 7.7 9.3 11.7 16.3 22.8 28.2 46.9 76.1 114.7 rt. SR500N VLVE WITH SPRING RETURN CTUTOR CT. SR 75 SR 75 SR 85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE VLBI 10.95 11.50 12.19 13.44 15.09 1701 18.82 22.09 - B 14.10 15.00 15.93 17.93 20.09 22.48 25.71 30.08 - C 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 3.72 3.72 4.17 4.84 5.39 6.46 7.36 8.58 - E 1.65 1.76 1.78 2.05 2.14 2.19 2.38 2.58 - F 8.15 8.15 9.35 10.69 12.91 16.85 20.55 22.64-4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 12.4 14.00 17.7 25.2 39.3 62.5 94.1 153 - * Consult factory 106 NORTH MERIC, INC.
BONOMI NORTH MERIC SERIES D501S SR501S rt. D501S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE 9.86 10.41 11.09 12.48 13.40 14.47 16.99 19.61 21.85 B 13.01 13.91 14.83 16.97 18.40 19.94 23.88 27.60 31.38 C 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 2.80 2.80 3.17 3.72 4.17 4.84 5.39 6.46 7.36 E 1.65 1.7 1.78 2.05 2.14 2.19 2.38 2.58 3.03 F 5.49 5.49 6.38 8.15 9.35 10.69 12.91 16.85 20.55 4 4 4 8 8 8 8 12 12 ØD2 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 10.6 11.5 13.7 25.3 31.4 42.3 57.9 93.0 131.4 rt. SR501S VLVE WITH SPRING RETURN CTUTOR VLBI CT. SR 75 SR 75 SR85 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE 10.95 11.50 12.19 13.44 15.09 1701 18.82 22.09 - B 14.10 15.00 15.93 17.93 20.09 22.48 25.71 30.08 - C 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 3.72 3.72 4.17 4.84 5.39 6.46 7.36 8.58 - E 1.65 1.76 1.78 2.05 2.14 2.19 2.38 2.58 - F 8.15 8.15 9.35 10.69 12.91 16.85 20.55 22.64-4 4 4 8 8 8 8 12 12 ØD2 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 15.3 16.2 17.3 34.2 47.9 76.6 105.0 170 * * Consult factory SERIES D501N SR501N rt. D501S VLVE WITH DOUBLE CTING CTUTOR CT. D 52 D 52 D 52 D 63 D 75 D 85 D 85 D 100 D 140 D 160 SIZE 9.23 9.86 10.41 11.09 12.48 13.40 14.47 16.99 19.61 21.85 B 12.20 13.01 13.91 14.83 16.97 18.40 19.94 23.88 27.60 31.38 C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 2.80 2.80 2.80 3.17 3.72 4.17 4.84 5.39 6.46 7.36 E 1.61 1.65 1.7 1.78 2.05 2.14 2.19 2.38 2.58 3.03 F 5.49 5.49 5.49 6.38 8.15 9.35 10.69 12.91 16.85 20.55 4 4 4 4 8 8 8 8 12 12 ØD2 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 1.67 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 9.3 10.6 11.5 13.7 25.3 31.4 42.3 57.9 93.0 131.4 rt. SR501S VLVE WITH SPRING RETURN CTUTOR VLBI CT. SR 75 SR 75 SR 75 SR 75 SR 100 SR 115 SR 125 SR 160 SR 200 * SIZE 10.32 10.95 11.50 12.19 13.44 15.09 1701 18.82 22.09 - B 13.29 14.10 15.00 15.93 17.93 20.09 22.48 25.71 30.08 - C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 3.72 3.72 3.72 4.17 4.84 5.39 6.46 7.36 8.58 - E 1.61 1.65 1.76 1.78 2.05 2.14 2.19 2.38 2.58 - F 8.15 8.15 8.15 9.35 10.69 12.91 16.85 20.55 22.64-4 4 4 4 8 8 8 8 12 12 ØD2 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 1.67 2.07 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 Wt/Lbs 14.0 15.3 16.2 17.3 34.2 47.9 76.6 105.0 170 * * Consult factory NORTH MERIC, INC. 107
BONOMI NORTH MERIC SERIES NMR3 3-WY CONDUIT 3-way single solenoid namur. NEM 4-4X LR 51090 MH 13513 MODEL VOLTGE INRUSH NMR3-D1 110 VC 62 m NMR3-D2 24 VDC 105 m NMR3-D12 12 VDC 204 m NMR3-D22 220 VC 31 m NMR3-D24 24 VC See* * Consult factory SERIES NMR3 3-WY DIN 3-way single solenoid namur. NEM 4-4X LR 51090 MH 13513 MODEL VOLTGE INRUSH NMR3-D1 110 VC 62 m NMR3-D2 24 VDC 105 m NMR3-D12 12 VDC 204 m NMR3-D22 220 VC 31 m NMR3-D24 24 VC See* * Consult factory 108 NORTH MERIC, INC.
BONOMI NORTH MERIC SERIES NMR3 3-WY EXPLOSION PROOF 3-way single solenoid namur. 202633x pproved for Hazardus Locations NEM 4-4x,7,9 CL.I. Zone1, Ex mii T4; Ex mii CL.I.; Div.1; GR.,B,C,D CL.II; GR. E,F,G - CL.III MODEL VOLTGE INRUSH NMR3-EX1 110 VC 74 m NMR3-EX2 24 VDC 190 m NMR3-EX12 12 VDC 372 m NMR3-EX22 24 VC 36 m SERIES NMR1 4-WY CONDUIT 4-way single solenoid namur. NEM 4-4X LR 51090 MH 13513 MODEL VOLTGE INRUSH NMR1-C1 110 VC 62 m NMR1-C2 24 VDC 108 m NMR1-C12 12 VDC 204 m NMR1-C22 220 VC 31 m NMR1-C24 24 VC See* * Consult factory NORTH MERIC, INC. 109
BONOMI NORTH MERIC SERIES NMR1 4-WY DIN 4-way single solenoid namur. NEM 4-4X LR 51090 MH 13513 MODEL VOLTGE INRUSH NMR1-D1 110 VC 62 m NMR1-D2 24 VDC 108 m NMR1-D12 12 VDC 204 m NMR1-D22 220 VC 31 m NMR1-D24 24 VC See* * Consult factory SERIES NMR1 4-WY EXPLOSION PROOF 4-way single solenoid namur. 202633x pproved for Hazardus Locations NEM 4-4x,7,9 CL.I. Zone1, Ex mii T4; Ex mii CL.I.; Div.1; GR.,B,C,D CL.II; GR. E,F,G - CL.III MODEL VOLTGE INRUSH NMR1-EX1 110 VC 74 m NMR1-EX2 24 VDC 190 m NMR1-EX12 12 VDC 372 m NMR1-EX22 220 VC 36m 110 NORTH MERIC, INC.
BONOMI NORTH MERIC SERIES BV NPT SIZE PRT# LENGHT HEX BV-1 BV-2 BV-3 BV-4 SERIES SBM NPT SIZE PRT# LENGHT HEX SBM-M SBM-1 SBM-2 SBM-3 SBM-4 SERIES SCM NPT SIZE PRT# LENGHT FLTS SCM-1 SCM-2 SCM-3 SCM-4 SERIES LIMIT SWITCH IP65 PRT# MOUNTING INFO 03900000149 03900280014 NORTH MERIC, INC. 111
Type 4X Indoor Use Only Enclosure. NEW - DESIGN PROTECTED GENERL SPECIFICTIONS the best in performance and long term reliability. The range has been manufactured with the following features: bushings (excluding Mod. VB015), and inserted in a rugged die-cast aluminium structure. interface. constant. condensation. 112
MODEL VB015 VB030 VB060 VB110 VB190 VB270 VB350 MX WORKING TORQUE (in-lbs) 133 266 530 975 1680 2390 3100 VOLTGE (V) LOW VOLTGE 12V C/DC 12V DC 12V DC 12V DC 12V DC 12V DC 12V DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC 24V C/DC HIGH VOLTGE MULTITENSION 100-240V C 100-240V C 100-240V C 100-240V C 100-240V C 100-240V C 100-240V C WORKING TIME (sec) 10 8 9 27 27 50 50 TORQUE LIMITER STD STD STD STD STD STD STD DUTY RTING IP65 IP65-67 IP65-67 IP65-67 IP65-67 IP65-67 IP65-67 PROTECTION * * NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X NEM 4 X ROTTION UPON REQUEST MNUL INTERVENTION STD STD STD STD STD STD STD POSITION INDICTOR STD STD STD STD STD STD STD WORKING TEMPERTURE HETER STD STD STD STD STD STD STD DDITIONL FREE LIMIT SWITCHES DRILLING ISO 5211 PD F03 - F05 F03 - F05 F05 - F07 F07 - F10 F07 - F10 F07 - F10 F07 - F10 * * SQURE DRIVE 0.43 0.43 0.55 0.67 0.67 0.87 0.87 SQURE UPON REQUEST 0.35 0.35-0.55 0.43-0.67 0.55-0.87 0.55-0.87 0.67 0.67 SFETY BLOCK NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST NOT VILBLE FOR MOD 12V POSITIONER (4~20m or 0~10 VDC) NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST LINER POTENTIOMETER (5K Ω 1W) NOT VILBLE UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST UPON REQUEST ELECTRICL CONNECTIONS PG11 PG11 PG11 PG11 PG11 PG11 PG11 WEIGHT (LBS) 3.09 5.07 7.28 10.80 10.80 13.23 13.23 * upon request F04 only ** UL pending ELECTRIC CTUTOR POWER CONSUMPTION MODEL VB015 VB030 VB060 VB110 VB190 VB270 VB350 VERSION H NOMINL VOLTGE 110V C 230V C BSORBED CURRENT 75m 25m 0.3-0.2 100-240V C 0.6-0.3 VERSION L BSORBED POWER 6.6 V 6 V 30-48V NOMINL VOLTGE 12V C/DC 24V C/DC BSORBED CURRENT 1.2 0.6 12V DC 24V C/DC 12V DC 24V C/DC 12V DC 24V C/DC 60-72 V 12V DC 24V C/DC 12V DC 24V C/DC 12V DC 24V C/DC 2.0 1.0 3.6 1.8 2.0 1.0 3.6 1.8 3.6 1.8 3.6 1.8 BSORBED POWER 15 V 24 V 44 V 24 V 44 V 44 V 44 V FREQUENCY 50/60 HZ 113
MOD. DRILLING ISO 5211 CH B C D E F G H I L M N O ØP VB015 F03 * - F05 0.43 4.84 5.57 1.67 4.74 4.96 0.61 4.06 1.26 0.55 1.42 1.97 10-24 UNC 2BX0.47 1/4-20 UNC 2BX0.55 2.68 VB030 F03 * - F05 0.43 6.18 7.40 2.38 5.12 5.75 1.65 1.30 1.42 0.47 1.42 1.97 10-24 UNC 2BX0.47 1/4-20 UNC 2BX0.55 2.56 VB060 F05 - F07 0.55 7.28 8.46 2.66 5.77 6.81 1.65 2.01 1.42 0.63 1.97 2.76 1/4-20 UNC 2BX0.59 5/16-18 UNC 2BX0.67 2.56 VB110 F07 - F10 0.67 8.31 9.14 3.31 6.02 7.01 2.13 2.13 1.58 0.75 2.76 4.02 5/16-18 UNC 2BX0.79 3/8-16 UNC 2BX0.79 4.33 VB190 F07 - F10 0.67 8.31 9.14 3.31 6.02 7.01 2.13 2.13 1.58 0.75 2.76 4.02 5/16-18 UNC 2BX0.79 3/8-16 UNC 2BX0.79 4.33 VB270 F07 - F10 0.87 8.74 9.19 3.03 6.69 7.17 2.03 2.13 1.58 0.95 2.76 4.02 5/16-18 UNC 2BX0.79 3/8-16 UNC 2BX0.79 4.33 VB350 F07 - F10 0.87 8.74 9.19 3.03 6.69 7.17 2.03 2.13 1.58 0.95 2.76 4.02 5/16-18 UNC 2BX0.79 3/8-16 UNC 2BX0.79 4.33 * Upon request F04 only 114
ELECTRIC WIRING VB015 12V-24V C/DC ELECTRIC WIRING VB015 115V-230V C - M + 3 2 1 115
ELECTRIC SPECIFICTION FROM VB30 TO VB350 12V DC, 24V C/DC. 110-240V C Earth L (+) N (GND) Fuse Fuse Closed Closing COM Opening Open Earth 4 5 6 1 2 3 COM FCU1 FCU2 Optional with potentiometer Optional Battery 24VDC Supply voltage board FCU1 Closing done FCU2 Opening done Free contacts Vmax 250Vac 30Vdc Imax 1 (COM 2) (PF>95) POS1 VV. CHIUSUR POS1 Closing done POS2 VV. PERTUR POS2 Opening done M ctuator Control board Motor WIRING OF THE POSITIONER FROM VB30 TO VB350 12V DC, 24V C/DC. 110-240V C CMD IN Earth L (+) IN_4-20M GND IN_0-10V N (GND) OUT_10V Fuse suitable to the actuator model Closed Open Fuses according to the loading and, anyway, lower than limit switches maximum current Segnalation lights IN_4-20M GND IN_0-10V OUT_10V It is indifferent to connect terminal block closing or opening Closing COM Opening 1 2 3 Supply voltage board ERTH COM FCU1 FCU2 IN_4-20M GND FCU1 Closing done IN_0-10V OUT_10V FCU2 Opening done Free contacts GND Vmax 250V ac 30V dc OUT_0-10V Imax 1 (COM 2) OUT_4-20m Control board actuator positioner CMD IN CMD OUT Internal potentiometer Motor M IN_4-20M MIN GND IN_0-10V OUT_10V MX Linear potentiometer (It is possible to connect the PLC outputs if compatible with the above chart) CMD OUT GND OUT_0-10V OUT_4-20m Rmis MIN=1K GND OUT_0-10V OUT_4-20m Rmis MX=500ohm (It is possible to connect the PLC intputs if compatible with the above chart) 116
CCESSORIES CRBON STEEL SQURE DPTER B E CODE B E 04400110901 0.35 0.43 0.39 04400141101 0.43 0.55 0.63 04400171101 0.43 0.67 0.67 04400171401 0.55 0.67 0.67 04400221701 0.67 0.87 0.87 04400272201 0.87 1.06 1.06 04400362701 1.06 1.42 1.42 * 04400271701 0.67 1.06 1.06 * ISI 316 STINLESS STEEL SQURE DPTER B E CODE B E 04400110902 0.35 0.43 0.39 04400140901 0.35 0.55 0.39 04400141102 0.43 0.55 0.63 04400171402 0.55 0.67 0.67 04400221702 0.67 0.87 0.87 04400272202 0.87 1.06 1.06 04400362702 1.06 1.42 1.42 117
OPERTING CONDITIONS: FLUID H2O - T 68 F SERIES 8E064*** - 8E068*** DN PSI 600 600 600 600 600 600 600 600 600 600 600 B 7.51 7.51 7.51 7.72 8.33 8.65 11.36 12.08 14.20 14.99 17.00 C 6.85 6.85 6.85 6.93 7.36 7.50 9.92 10.28 11.94 12.31 13.73 D 4.84 4.84 4.84 4.84 4.84 4.84 6.18 6.18 7.28 7.28 8.31 E 6.41 6.41 6.41 6.41 6.41 6.41 7.50 7.50 8.43 8.43 9.33 F 1.67 1.67 1.67 1.67 1.67 1.67 2.38 2.38 2.66 2.66 3.31 G 4.74 4.74 4.74 4.74 4.74 4.74 5.12 5.12 5.77 5.77 6.02 H 2.64 2.64 2.64 3.00 3.35 3.66 4.13 4.80 6.10 6.89 8.03 CT. VB 015 VB 015 VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VB 060 VB 060 VB 110 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE 001 12V C/DC 002 24V C/DC 003 100-240 VC 004* 220VC 012 24V C/DC 013 100-240 VC 021 12V C/DC 022 24V C/DC 023 100-240 VC *VB015 SERIES 8E067*** DN PSI 1000 1000 1000 1000 1000 1000 B 7.53 7.75 8.33 8.73 11.40 12.15 C 6.85 6.93 7.32 7.46 9.88 10.24 D 4.84 4.84 4.84 4.84 6.18 6.18 E 6.41 6.41 6.41 6.41 7.50 7.50 F 1.67 1.67 1.67 1.67 2.38 2.38 G 4.74 4.74 4.74 4.74 5.12 5.12 H 2.64 3.07 3.54 3.94 4.41 5.32 CT. VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE 001 12V C/DC 002 24V C/DC 003 100-240 VC 004* 220VC 012 24V C/DC 013 100-240 VC 021 12V C/DC 022 24V C/DC 023 100-240 VC *VB015 118
OPERTING CONDITIONS: FLUID H2O - T 68 F SERIES 8E065(T) *** 8E066(L) *** DN PSI 400 400 400 400 400 400 400 400 400 400 B 7.44 7.44 7.44 7.63 9.98 10.43 11.16 13.05 14 14.04 C 6.77 6.77 6.77 6.86 9.03 9.25 9.74 11.36 11.81 11.81 D 4.84 4.84 4.84 4.84 6.18 6.18 6.18 7.38 7.28 7.28 E 6.41 6.41 6.41 6.41 7.50 7.50 7.50 8.43 8.43 8.43 F 1.67 1.67 1.67 1.67 2.38 2.38 2.38 2.66 2.66 2.66 G 4.74 4.74 4.74 4.74 5.12 5.12 5.12 5.77 5.77 5.77 H 2.64 2.64 2.87 3.19 3.74 4.39 4.86 5.73 6.93 7.08 I 1.32 1.32 1.44 1.60 1.87 2.20 2.43 2.87 3.47 3.54 CT. VB 015 VB 015 VB 015 VB 015 VB 030 VB 030 VB 030 VB 060 VB 060 VB 060 VOLTGE SUFFIX STNDRD FIL-SFE POSITIONER *VB015 VOLTGE SUFFIX VOLTGE 001 12V C/DC 002 24V C/DC 003 100-240 VC 004* 220VC 012 24V C/DC 013 100-240 VC 021 12V C/DC 022 24V C/DC 023 100-240 VC SERIES 8E069(T) *** 8E070(L) *** 8E071(T) *** 8E072(L) *** FULL PORT STNDRD PORT PSI 1000 1000 1000 1000 1000 800 800 800 DN DN - - B 7.80 7.80 9.96 10.15 11.97 12.47 13.90 15.13 C 7.02 7.02 9.05 9.05 10.64 10.94 12.02 12.77 D 4.84 4.84 6.18 6.18 7.28 7.28 8.31 8.31 E 6.41 6.41 7.50 7.50 8.43 8.43 9.33 9.33 F 1.67 1.67 2.38 2.38 2.66 2.66 3.31 3.31 G 4.74 4.74 5.12 5.12 5.77 5.77 6.02 6.02 H 2.83 2.83 3.26 3.89 4.40 4.92 5.86 6.85 I 1.41 1.41 1.63 1.94 2.20 2.46 2.93 3.42 CT. VB 015 VB 015 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 D E = = F G VOLTGE SUFFIX B C I = H = STNDRD FIL-SFE POSITIONER VOLTGE SUFFIX VOLTGE 001 12V C/DC 002 24V C/DC 003 100-240 VC 004* 220VC 012 24V C/DC 013 100-240 VC 021 12V C/DC 022 24V C/DC 023 100-240 VC *VB015 119
BONOMI NORTH MERIC SERIES E500S*** Wt/Lbs 9.9 10.6 12.2 13.5 18.1 22.7 28.00 39.9 55.5 * SIZE 13.11 13.40 14.29 14.53 16.33 16.80 18.04 19.38 20.69 * B 16.08 16.89 17.79 18.27 20.82 21.80 23.51 26.27 26.68 * C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 6.18 6.18 6.18 6.18 7.28 7.28 8.31 8.31 8.74 * E 7.50 7.50 7.50 7.50 8.43 8.43 9.33 9.33 9.72 * F 2.38 2.38 2.38 2.66 2.66 3.31 3.31 3.03 3.03 * G 5.12 5.12 5.12 5.12 5.77 6.02 6.02 6.02 6.69 * H 1.61 1.65 1.76 1.78 2.05 2.14 2.20 2.34 2.58 3.03 4 4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 1.67 2.02 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 110 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE 001 12V C/DC STNDRD 002 24V C/DC 003 100-240 VC 004* 220VC FIL-SFE 012 24V C/DC 013 100-240 VC 021 12V C/DC POSITIONER 022 24V C/DC 023 100-240 VC *VB015 SERIES E500N*** Wt/Lbs 9.9 10.6 12.2 13.5 18.1 22.7 28.00 39.9 55.5 * SIZE 13.11 13.40 14.29 14.53 16.33 16.80 18.04 19.38 20.69 * B 16.08 16.89 17.79 18.27 20.82 21.80 23.51 26.27 26.68 * C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 6.18 6.18 6.18 6.18 7.28 7.28 8.31 8.31 8.74 * E 7.50 7.50 7.50 7.50 8.43 8.43 9.33 9.33 9.72 * F 2.38 2.38 2.38 2.66 2.66 3.31 3.31 3.03 3.03 * G 5.12 5.12 5.12 5.12 5.77 6.02 6.02 6.02 6.69 * H 1.61 1.65 1.76 1.78 2.05 2.14 2.20 2.34 2.58 3.03 4 4 4 4 4 4 4 4 4 4 ØD2 0.75 0.75 0.75 0.75 0.75 0.87 0.87 0.87 1.00 1.00 ØD1 1.67 2.02 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 110 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE 001 12V C/DC STNDRD 002 24V C/DC 003 100-240 VC 004* 220VC FIL-SFE 012 24V C/DC 013 100-240 VC 021 12V C/DC POSITIONER 022 24V C/DC 023 100-240 VC *VB015 120 NORTH MERIC, INC.
BONOMI NORTH MERIC SERIES E501S *** Wt/Lbs 12.2 13.5 14.4 15.5 27.1 31.3 42.1 50.90 72.4 * SIZE 13.11 13.40 14.29 14.53 16.33 16.80 18.04 19.38 20.69 * B 16.08 16.89 17.79 18.27 20.82 21.80 23.51 26.27 26.68 * C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 6.18 6.18 6.18 6.18 7.28 7.28 8.31 8.31 8.74 * E 7.50 7.50 7.50 7.50 8.43 8.43 9.33 9.33 9.72 * F 2.38 2.38 2.38 2.66 2.66 3.31 3.31 3.03 3.03 * G 5.12 5.12 5.12 5.12 5.77 6.02 6.02 6.02 6.69 * H 1.61 1.65 1.76 1.78 2.05 2.14 2.20 2.34 2.58 3.03 4 4 4 4 8 8 8 8 12 12 TH 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 1.67 2.02 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE 001 12V C/DC STNDRD 002 24V C/DC 003 100-240 VC 004* 220VC FIL-SFE 012 24V C/DC 013 100-240 VC 021 12V C/DC POSITIONER 022 24V C/DC 023 100-240 VC *VB015 SERIES E501N *** Wt/Lbs 12.2 13.5 14.4 15.5 27.1 31.3 42.1 50.90 72.4 * SIZE 13.11 13.40 14.29 14.53 16.33 16.80 18.04 19.38 20.69 * B 16.08 16.89 17.79 18.27 20.82 21.80 23.51 26.27 26.68 * C 4.74 4.74 5.49 6.00 7.50 8.50 9.50 11.75 14.25 17.00 D 6.18 6.18 6.18 6.18 7.28 7.28 8.31 8.31 8.74 * E 7.50 7.50 7.50 7.50 8.43 8.43 9.33 9.33 9.72 * F 2.38 2.38 2.38 2.66 2.66 3.31 3.31 3.03 3.03 * G 5.12 5.12 5.12 5.12 5.77 6.02 6.02 6.02 6.69 * H 1.61 1.65 1.76 1.78 2.05 2.14 2.20 2.34 2.58 3.03 4 4 4 4 8 8 8 8 12 12 TH 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9 ØD1 1.67 2.02 2.54 3.10 4.09 4.85 6.13 7.97 9.86 11.87 CT. VB 030 VB 030 VB 030 VB 030 VB 060 VB 060 VB 110 VB 190 VB 350 * * Consult factory VOLTGE SUFFIX VOLTGE SUFFIX VOLTGE 001 12V C/DC STNDRD 002 24V C/DC 003 100-240 VC 004* 220VC FIL-SFE 012 24V C/DC 013 100-240 VC 021 12V C/DC POSITIONER 022 24V C/DC 023 100-240 VC *VB015 NORTH MERIC, INC. 121
PRESSURE TEMPERTURE RTING - FLOW RTE DIGRM PRESSURE - TEMPERTURE CHRT FOR BUTTERFLY VLVES psi 300 NBR 212 F - EPDM 266 F psi 300 VITON 302 F 250 250 200 150 100 50 170 85 NBR EPDM 200 150 100 50 170 60 0 0 14 68 167 212 266 320 50 100 150 200 250 300 F 0 14 0 68 167 212 266 302 320 50 100 150 200 250 300 F FLOW-RTE CHRT FOR BUTTERFLY VLVES Kv/Kv 100% 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 0% Closed 40% 4% 12% 1 2 3 Lever positioning 100% Open 25 psi 3/4 1 1/4 2 3 1/2 1 1 1/2 2 1/2 4 25 psi 1/2 1 1 1/2 2 1/2 4 3/8 3/4 1 1/4 2 3 10 10 1 1 10 100 1000 1 1 10 100 1000 10000 For rt. 100202 For rt. 100002-100003 122
PRESSURE TEMPERTURE RTING PRESSURE - TEMPERTURE CHRT FOR BLL VLVES 123
TORQUE VLUES OF STEEL ND BRSS VLVES VLUES IN in-lbs Break Torque The torque values (in-lbs) shown in the table were measured at the test bench under following conditions: PRESSURE: 0/2000 psi. FLUID: Demineralized water. Steel (all series) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi 1500 psi 2000 psi 27 35 35 35 44 44 44 53 53 27 35 35 35 44 44 44 53 53 106 115 115 133 142 159 177 195-115 124 124 133 150 168 186 204-133 150 150 168 186 204 221 - - 177 195 195 212 239 257 283 - - 257 283 292 310 345 372 416 - - 487 540 540 593 646 - - - - 575 637 637 699 770 - - - - 797 956 956 1053 1159 - - - - 850 1018 1018 1124 1239 - - - - 1611 2903 2903 3186 3505 - - - - 2646 5824 5824 6408 - - - - - Brass (all series except 250N-253N-355N-365N) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi - - 48 55 55 64 64 72 72 - - 64 72 72 80 80 88 88 - - 127 135 135 143 143 151 151 - - 167 175 175 175 175 191 191 - - 175 183 183 183 191 191 - - - 374 398 398 406 406 414 - - - 382 406 430 446 470 510 - - - 478 510 566 613 693 765 - - - 868 115 1147 1227 1386 1561 - - - 1035 1274 1306 1386 1545 1721 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - N.B. N.B. For valves with integral seats, shown values must be doubled. Running torque The torque values (in-lbs) shown in the table were measured after 2 cycles at the test bench under following conditions: PRESSURE: 0/2000 psi. FLUID: Demineralized water. Steel (all series) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi 1500 psi 2000 psi 27 27 31 35 35 40 44 53 62 40 40 49 58 62 66 71 75 80 53 53 62 62 66 75 80 89-62 66 71 75 75 80 89 106-62 80 89 97 102 115 - - - 97 159 159 168 186 221 - - - 266 283 292 310 327 354 - - - 310 354 398 460 487 531 - - - 620 655 681 735 912 1115 - - - 841 991 1044 1142 1213 1460 - - - 974 1637 1903 2478 2567 3540 - - - 1460 2301 2832 3620 4222 5018 - - - 1726 4337 5177 5576 - - - - - Brass (all series except 250N-253N-355N-365N) SIZES 15 psi 100 psi 150 psi 200 psi 350 psi 600 psi 900 psi - - 24 24 28 32 32 36 40 - - 36 36 44 52 56 60 64 - - 48 48 56 56 60 68 72 - - 56 60 64 68 67 72 80 - - 56 72 80 88 92 104 - - - 88 143 143 151 167 199 - - - 239 255 263 279 295 319 - - - 279 319 358 414 438 478 - - - 558 589 613 661 820 1004 - - - 757 892 940 1028 1091 1314 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - N.B. N.B. For valves with integral seats, shown values must be doubled. 124
PRESSURE CONVERSION FROM PSI TO BR psi bar psi bar psi bar psi bar psi bar 1 0.07 66 4.55 255 17.58 860 59.29 1510 104.10 2 0.14 67 4.62 260 17.92 870 59.98 1520 104.79 3 0.21 68 4.69 265 18.27 880 60.67 1530 105.48 4 0.28 69 4.76 270 18.61 890 61.36 1540 106.17 5 0.34 70 4.83 275 18.96 900 62.05 1550 106.86 6 0.41 71 4.89 280 19.30 910 62.74 1560 107.55 7 0.48 72 4.96 285 19.65 920 63.42 1570 108.24 8 0.55 73 5.03 290 19.99 930 64.11 1580 108.93 9 0.62 74 5.10 295 20.34 940 64.80 1590 109.61 10 0.69 75 5.17 300 20.68 950 65.49 1600 110.30 11 0.76 76 5.24 310 31.37 960 66.18 1610 110.99 12 0.83 77 5.31 320 22.06 970 66.87 1620 111.68 13 0.90 78 5.38 330 22.75 980 67.56 1630 112.37 14 0.97 79 5.45 340 23.44 990 68.25 1640 113.06 15 1.03 80 5.52 350 24.13 1000 68.94 1650 113.75 16 1.10 81 5.58 360 24.82 1010 69.63 1660 114.44 17 1.17 82 5.65 370 25.51 1020 70.32 1670 115.13 18 1.24 83 5.72 380 26.20 1030 71.01 1680 115.82 19 1.31 84 5.79 390 26.89 1040 71.70 1690 116.51 20 1.38 85 5.86 400 27.58 1050 72.39 1700 117.20 21 1.45 86 5.93 410 28.27 1060 73.08 1710 117.89 22 1.52 87 6.00 420 28.95 1070 73.77 1720 118.58 23 1.59 88 6.07 430 26.64 1080 74.46 1730 119.27 24 1.65 89 6.14 440 30.33 1090 75.14 1740 119.96 25 1.72 90 6.20 450 31.02 1100 75.83 1750 120.65 26 1.79 91 6.27 460 31.71 1110 76.52 1760 121.33 27 1.86 92 6.34 470 32.40 1120 77.21 1770 122.02 28 1.93 93 6.41 480 33.09 1130 77.90 1780 122.71 29 2.00 94 6.48 490 33.78 1140 78.59 1790 123.40 30 2.07 95 6.55 500 34.47 1150 79.28 1800 124.09 31 2.14 96 6.62 510 35.16 1160 79.97 1810 124.78 32 2.21 97 6.69 520 35.85 1170 80.66 1820 125.47 33 2.28 98 6.76 530 36.54 1180 81.35 1830 126.16 34 2.34 99 6.83 540 37.23 1190 82.04 1840 126.85 35 2.41 100 6.89 550 37.92 1200 82.73 1850 127.54 36 2.48 105 7.24 560 38.61 1210 83.42 1860 128.23 37 2.55 110 7.58 570 39.30 1220 84.11 1870 128.92 38 2.62 115 7.93 580 39.99 1230 84.80 1880 129.61 39 2.69 120 8.27 590 40.67 1240 85.49 1890 130.30 40 2.76 125 8.62 600 41.36 1250 86.18 1900 130.99 41 2.83 130 8.96 610 42.05 1260 86.86 1910 131.68 42 2.90 135 9.31 620 42.74 1270 87.55 1920 132.36 43 2.96 140 9.65 630 43.43 1280 88.24 1930 133.05 44 3.03 145 10.00 640 44.12 1290 88.93 1940 133.74 45 3.10 150 10.34 650 44.81 1300 89.62 1950 134.43 46 3.17 155 10.69 660 45.50 1310 90.31 1960 135.12 47 3.24 160 11.03 670 46.19 1320 91.00 1970 135.81 48 3.31 165 11.38 680 46.88 1330 91.69 1980 136.50 49 3.38 170 11.72 690 47.57 1340 92.38 1990 137.19 50 3.45 175 12.06 700 48.26 1350 93.07 2000 137.88 51 3.52 180 14.41 710 48.95 1360 93.76 2010 138.57 52 3.58 185 12.75 720 49.64 1370 94.45 2020 139.26 53 3.65 190 13.10 730 50.33 1380 95.14 2030 139.95 54 3.72 195 13.44 740 51.02 1390 95.83 2040 140.64 55 3.79 200 13.79 750 51.71 1400 96.52 2050 141.33 56 3.86 105 14.13 760 52.39 1410 97.21 2060 142.02 57 3.93 210 14.48 770 53.08 1420 97.89 2070 142.71 58 4.00 215 14.82 780 53.77 1430 98.58 2080 143.40 59 4.07 220 15.17 790 54.46 1440 99.27 2090 144.08 60 4.14 225 15.51 800 55.15 1450 99.96 2100 144.77 61 4.21 230 15.86 810 55.84 1460 100.65 2110 145.46 62 4.27 235 16.20 820 56.53 1470 101.34 2120 146.15 63 4.34 240 16.55 830 57.22 1480 102.03 2130 146.84 64 4.41 245 16.89 840 57.91 1490 102.72 2140 147.53 65 4.48 250 17.24 850 58.60 1500 103.41 2150 148.22 125
TEMPERTURE CONVERSION FROM C TO F Conv Conv Conv Conv Conv -46-50 -58-11 12 54 23 74 165 58 136 277 92 198 388-45 -49-56 -11 13 55 24 75 167 58 137 279 93 199 390-44 -48-54 -10 14 57 24 76 169 59 138 280 93 200 392-44 -47-53 -9 15 59 5 77 171 59 139 282 94 201 394-43 -46-51 -9 16 61 26 78 172 60 140 284 94 202 396-43 -45-49 -8 17 63 26 79 174 61 141 286 95 203 397-42 -44-47 -8 18 64 27 80 176 61 142 288 96 204 399-42 -43-45 -7 19 66 27 81 178 62 143 289 96 205 401-41 -42-44 -7 20 68 28 82 180 62 144 291 97 206 403-41 -41-42 -6 21 70 28 83 181 63 145 293 97 207 405-40 -40-40 -6 22 72 29 84 183 63 146 295 98 208 406-39 -39-38 -5 23 73 29 85 185 64 147 297 98 209 408-39 -38-36 -4 24 75 20 86 187 64 148 298 99 210 410-38 -37-35 -4 25 77 31 87 789 65 149 300 99 211 412-38 -36-33 -3 26 79 31 88 190 66 150 302 100 212 414-37 -35-31 -3 27 81 32 89 192 66 151 304 101 213 415-37 -34-29 -2 28 82 32 90 194 67 152 306 101 214 417-36 -33-27 -2 29 84 33 91 196 67 153 307 102 215 419-36 -32-26 -1 30 86 33 92 198 68 154 309 102 216 421-35 -31-24 -1 31 88 34 93 199 68 155 311 103 217 423-34 -30-22 0 32 90 34 94 201 69 156 313 103 218 424-34 -29-20 1 33 91 35 95 203 69 157 315 104 219 426-33 -28-18 1 34 93 36 96 205 70 158 316 104 220 428-33 -27-17 2 35 95 36 97 207 71 159 318 105 221 430-32 -26-15 2 36 97 37 98 208 71 160 320 106 222 432-32 -25-13 3 37 99 37 99 210 71 161 322 106 223 433-31 -24-11 3 38 100 38 100 212 72 162 324 107 224 435-31 -23-9 4 39 102 38 101 214 73 163 325 107 225 437-30 -22-8 4 40 104 39 102 216 73 164 327 108 226 439-29 -21-6 5 41 106 39 103 217 74 165 329 108 227 441-29 -20-4 6 42 108 40 104 219 74 166 331 109 228 442-28 -19-2 6 43 109 41 105 221 75 167 333 109 229 444-28 -18 0 7 44 111 41 106 223 76 168 334 110 230 446-27 -17 1 7 45 113 42 107 225 76 169 336 111 231 448-27 -16 3 8 46 115 42 108 226 77 170 338 111 232 450-26 -15 5 8 47 117 43 109 228 77 171 340 112 233 451-26 -14 7 9 48 118 43 110 230 78 172 342 112 234 453-25 -13 9 9 49 120 44 111 232 78 173 343 113 235 455-24 -12 10 10 50 122 44 112 234 79 174 345 113 236 457-24 -11 12 11 51 124 45 113 235 79 175 347 114 237 459-23 -10 14 11 52 126 46 114 237 80 176 349 114 238 460-23 -9 16 12 53 127 46 115 239 81 177 351 115 239 462-22 -8 18 12 54 129 47 116 241 81 178 352 116 240 464-22 -7 19 13 55 131 47 117 243 82 179 354 116 241 466-21 -6 21 13 56 133 48 118 244 82 180 356 117 242 468-21 -5 23 14 57 135 48 119 246 83 181 358 117 243 469-20 -4 25 14 58 136 49 120 248 83 152 360 118 244 471-19 -3 27 15 59 138 49 121 250 84 183 361 118 245 473-19 -2 28 16 60 140 50 122 252 84 184 363 119 246 475-18 -1 30 16 61 142 51 123 253 85 185 365 119 247 477-18 0 32 17 62 144 51 124 255 86 186 367 120 248 478-17 1 34 17 63 145 52 125 257 86 187 369 121 249 480-17 2 36 18 64 147 52 126 259 87 188 370 121 250 482-16 3 37 18 65 149 53 127 261 87 189 372 122 251 484-16 4 39 19 66 151 53 128 262 88 190 374 122 252 486-15 5 41 19 67 153 54 129 264 88 191 376 123 253 487-14 6 43 20 68 154 54 130 266 89 192 378 123 254 489-14 7 45 21 69 156 55 131 268 89 193 379 124 255 491-13 8 46 21 70 158 56 132 270 90 194 381 124 256 493-13 9 48 22 71 160 56 133 271 91 195 383 125 257 495-12 10 50 22 72 162 57 134 273 91 196 385 126 258 496-12 11 52 23 73 163 57 135 275 92 197 387 126 259 498 USE OF THE TBLE Please always refer to the column in the middle (conv. column). If the temperature you need to convert is in Celsius degrees you get the corresponding Fahrenheit temperature by reading the data on its right; while if it is a Fahrenheit temperature you get the Celsius one on the left side. The general conversion formulas are: 9 5 5 9 126