LS Series Limit Switches. Short Form Catalogue AC1300 ABB

Short Form Catalogue LS Series Limit Switches AC ABB

LS Series Limit Switches Foot Switches Contents Panorama... 2 Limit Switches - Plastic Casing and Metal Casing... 12 Safety Limit Switches - Plastic Casing and Metal Casing... 4 Limit Switches with Latch and Manual Reset - Plastic Casing and Metal Casing... 54 Foot Switches with Cover... 6 1 AC

Plastic Casing NEMA-1 - Double insulation 3 mm L S 3 5 P... 6 mm L S 7 5 P... Width LS Series Limit Switches Type LS..P1, LS..P11 LS..P12, LS..P LS..P LS..P31 Actuator Plain plunger Roller plunger Plain plunger Roller lever Action type CENELEC conformity / Positive opening operation EN 547 EN 547 EN 547 EN 547 Nota: For LS75P... (6 mm width) compatible with EN 547 (fixing) LS..P51, LS..P53 LS..P52 LS..P55 LS..P61 LS..P62 LS..P71, LS..P72 Adjustable roller lever Adjustable roller lever Adjustable roller lever Flexible lever Flexible lever Adjustable rod lever Plastic Casing NEMA-1 - Double insulation 4 mm L S 4 5 P... Width As the range is very large, the products shown here are the most common. For the complete range, please consult us. Type LS..P11 LS..P LS..P31 LS..P41 Actuator Plain plunger Roller plunger Roller lever Roller lever Action type CENELEC conformity / Positive opening operation EN 541 EN 541 EN 541 2 AC

Plastic Casing NEMA-1 LS..P32 LS..P35 LS..P38 LS..P41, LS..P43 LS..P42 LS..P45, LS..P46 Roller lever Roller lever Adjustable roller lever Roller lever Roller lever Roller lever EN 547 EN 547 LS..P73 LS..P74 LS..P78 LS..P91 LS..P92 LS..P98B11-A Adjustable rod lever Adjustable rod lever Adjustable rod lever Flexible rod Flexible rod Pull action LS..P44 LS..P51 LS..P54 LS..P61 LS..P72 LS..P91 Roller lever Adjustable roller levers Adjustable flexible and rigid rod levers Flexible rod EN 541 3 AC

Metal Casing NEMA-4X 3 mm L S 3 5 M... 6 mm L S 7 5 M... Width LS Series Limit Switches Type LS..M11 LS..M12, LS..M LS..M LS..M31 Actuator Plain plunger Roller plunger Plain plunger Roller lever Action type CENELEC conformity / Positive opening operation EN 547 EN 547 EN 547 EN 547 Nota: For LS75M... (6 mm width) compatible with EN 547 (fixing) LS..M51, LS..M53 LS..M52 LS..M55 LS..M61 LS..M62 LS..M71, LS..M72 Adjustable roller lever Adjustable roller lever Adjustable roller lever Flexible lever Flexible lever Adjustable rod lever Metal Casing NEMA-4X 4 mm L S 4 5 M... Width As the range is very large, the products shown here are the most common. For the complete range, please consult us. Type LS..M11 LS..M LS..M LS..M LS..M31 Actuator Plain plunger Roller plunger Plain plunger Roller plunger Roller lever Action type CENELEC conformity / Positive opening operation EN 541 EN 541 EN 541 EN 541 4 AC

Metal Casing NEMA-4X LS..M32 LS..M35 LS..M38 LS..M41, LS..M43 LS..M42 LS..M45, LS..M46 Roller lever Roller lever Adjustable roller lever Roller lever Roller lever Roller lever EN 547 EN 547 LS..M73 LS..M74 LS..M78 LS..M91 LS..M92 LS..M98B11-A Adjustable rod lever Adjustable rod lever Adjustable rod lever Flexible rod Flexible rod Pull action LS..M41 LS..M51 LS..M54 LS..M61 LS..M72 LS..M91 Roller lever Adjustable roller levers Adjustable flexible and rigid rod levers Flexible rod EN 541 EN 541 5 AC

Safety Limit Switches LS Series Limit Switches 3 mm L S 3 5... Width P = Plastic casing M = Metal casing 4 mm L S 4 5... Width P = Plastic casing M = Metal casing Limit Switches LS35P8..-S LS35M8..-S LS35P81..-S LS35M81..-S LS45P8..-S LS45M8..-S Operating head options: Adjustable head Pivoting head Adjustable head Action type: Translation with small latch (key) Positive opening operation Keys Keys for LS3... limit switches LSA3P3 LSA3P4 LSA3P5 LSA3P6 LSA3P7 LSA3P8 LSA3P9 Keys for LS4... limit switches LSA4X5 LSA4X6 LSA4X7 LSA4X8 LSA4X9 Actuator Right Straight Right Straight Right angle Straight Adjustable angle key key angle key key key + shock key + shock angle key absorber absorber Fixing mm mm mm mm 15 mm 15 mm 4 mm Limit Switches with Latch and Manual Reset P = Plastic casing M = Metal casing 3 mm L S 3 5... Width Limit Switches LS35P11..-R LS35M11..-R LS35P12..-R LS35M12..-R Actuator: Galvanized steel plain plunger Galvanized steel roller plunger Action type Positive opening operation 6 AC

Plastic Casing NEMA-1 Safety Limit Switches with Pulling Cable P = Plastic casing M = Metal casing 3 mm L S 3 5... Width and Metal Casing NEMA-4X 4 mm L S 4 5 M... 6 mm L S 6 5 M... Width Limit Switches LS35P98..-SCR LS35M98..-SCR LS45M98..-SCR LS65M98..-SCR Actuator: By red cable By red cable Action type: Pulling Positive opening operation Safety Limit Switches with Rotative Axis or with Lever P = Plastic casing M = Metal casing 3 mm L S 3 5... Width Limit Switches LS35P75..-S Actuator: Galvanized steel rotative axis Stainless steel rotative axis Galvanized steel lever Action type LS35M75..-S LS35P76..-S LS35M76..-S LS35M77..-S LS35P77..-S Positive opening operation LS35P..-R LS35M..-R LS35P31..-R LS35M31..-R LS35P32..-R LS35M32..-R LS35P41..-R LS35M41..-R Plastic roller plunger Plastic roller lever on galvanized steel plunger Rotary lever with plastic roller 7 AC

LS Series Prewired 35 mm width Metal Casing NEMA-4X Plastic Casing NEMA-1 Double insulation L S 2... Type LS2..M11, LS2..P11 LS2..M12, LS2..P12 LS2..M, LS2..P LS2..M, LS2..P Actuator Brass plain plunger Steel roller plunger Cross steel roller plunger Brass plain plunger with fixing nuts Action type M = Metal casing P = Plastic casing 5 = Cable output left / right 6 = Cable output bottom As the range is very large, the products shown there are the most common. For the complete range, please consult us. CENELEC conformity / Positive opening operation LS2..M, LS2..P LS2..M24, LS2..P24 LS2..M41, LS2..P41 LS2..M51, LS2..P51 LS2..M71, LS2..P71 LS2..M91, LS2..P91 Steel roller plunger Cross steel roller lever ø Plastic roller lever Adjustable ø18 Adjustable ø3 Spring rod with fixing nuts with fixing nuts plastic roller lever steel rod lever Foot Switches with Cover Double insulation IP65 Foot Switches IPS..1.. IPS..2.. IPS..3.. Actuator: Free movement Locked in neutral position Latched in low position Action type CENELEC conformity / Positive opening operation AC

LS Series Limit Switches Foot Switches Contents Limit Switches Description... 1 Ordering Details... Travel and Diagrams... 25 Technical Data... 26 Selection Table and Functional Characteristics... 28 Safety Limit Switches Description... 42 Ordering Details... 45 Travel and Diagrams... 48 Technical Data... 5 Selection Table and Functional Characteristics... 51 Limit Switches with latch and manual reset Description... 56 Ordering Details... 57 Travel and Diagrams... 58 Technical Data... 59 Selection Table and Functional Characteristics... 6 Foot Switches Description... 62 Ordering Details... 63 Technical Data... 64 AC

Applications Easy to use, electromechanical limit switches offer specifi c qualities: Visible operation. Able to switch strong currents (5 A conventional thermal current). Electrically separated contacts ( shape). Contact blocks with positive opening operation of the "N.C." normally closed contact(s) (symbol ). Precise operating points (consistency). Immune to electromagnetic disturbances. They are exceptional detection devices thanks to these characteristics: Presence/absence. Positioning and travel limit. Objects passing/counting. Description LS25P... LS26P limit switches, made of fibre-glass reinforced UL-V thermoplastic material, sealed with epoxy resin at the base on the body, offer double insulation and a degree of protection NEMA-1. LS25M... LS26M limit switches, made of zinc alloy (zamack), sealed with epoxy resin at the base on the body, offer a degree of protection NEMA-4X. The casings come in 35 mm width. LS25P... LS26P.. and LS25M... LS26M.. Prewired Limit Switches Double Insulation - Plastic Casing NEMA-1 or Metal Casing NEMA-4X A variety of operating heads: Plain plunger Roller plunger Roller lever, adjustable or not, etc. Assembled using 2 x ø3 screws for LS25P...LS26P Assembled using 2 x M3 screws for LS25M...LS26M Casing: 35 mm width Mounting the casing: 2 x M4 screws on the top part Electrical connection: Cable output left/right or cable output bottom: for LS25P...LS26P - cable UL 62 PVC 4 x AWG 18 for LS25M...LS26M - cable UL 62 PVC 5 x AWG 18 Standard length: 1 m (other lenghts on request) Other outputs (on request): - connector M12 or 7/8" NPT - cable with end connector Contact blocks: Contact confi guration: 1 N.O. + 1 N.C. Positive opening operation Snap action or slow action shape: the 2 contacts are electrically separated Compounding with epoxy resin for IP67 protection degree Type Example: L S 2 5 P 1 1 B 1 1 P 1 Example: L S 2 5 M 5 1 D 1 1 P 2 L S Limit Switch... LS Cable length: 1... 1 m 2... 2 m 3... 3 m 5... 5 m 1... 1 m (Max. for UL cable) Casing width: 35 mm... 2 1 cable output left / right... 5 1 cable output bottom... 6 Plastic casing...p Metal casing... M Operating heads Codes... 1... 98 Contact types: 11... 1 N.O. + 1 N.C. contacts Snap action: B... Snap U... cable UL 62 - PVC Dependent (slow) action: D... Non-overlapping late make 1 AC

LS35P.., LS45P.. and LS75P.. Limit Switches Double Insulation - Plastic Casing NEMA-1 Applications Easy to use, electromechanical limit switches offer specific qualities: Visible operation. Able to switch strong currents (1 A conventional thermal current). Electrically separated contacts. Contact blocks with positive opening operation of the "N.C." normally closed contact(s) (symbol ). Precise operating points (consistency). Immune to electromagnetic disturbances. They are exceptional detection devices thanks to these characteristics: Presence/absence. Positioning and travel limit. Objects passing/counting. Description LS35P..., LS45P... and LS75P..., limit switches, which are made of fibre-glass reinforced UL-V thermoplastic material, offer double insulation and a degree of protection NEMA-1. The casings come in 3 dimensions: LS35P... 3 mm width, LS45P... 4 mm width, LS75P... 6 mm width. Cover: Closed using 1 x ø3 screw for 3 & 6 mm width Self clipping closure for 4 mm width One piece sealing gasket to ensure tightness Mounting the casing: 2 x M4 screws for 3 mm width 2 or 4 x M5 screws for 4 mm width 2 or 4 x M4 screws for 6 mm width Electrical connection: 1 (LS35P) cable inlet by 1/2" NPT plastic adaptor 1 (LS45P) cable inlet for 1/2" NPT cable gland 1 (LS75P) cable inlet by 1/2" NPT plastic adaptor + 1 cable inlet Pg11 for additional 1/2" NPT plastic adaptor (on request) Suitable for conduit connection only with use of adaptor sleeve optionally provided by manufacturer. (on request) L96D A variety of operating heads: Plain plunger Roller plunger Roller lever, adjustable or not, etc. Assembled using 4 x ø3 screws for 3 & 6 mm width Assembled using 4 x ø4 screws for 4 mm width Casing: 3 mm width with standardized dimensions according to EN 547 4 mm width with standardized dimensions according to EN 541 6 mm width compatible with EN 547 (Fixing) Block of 2 contacts: Contact configuration: 1 N.O. + 1 N.C., 2 N.O., 2 N.C. Positive opening operation Snap action or slow action The 2 contacts are electrically separated Connecting terminals: M3.5 (+, ) pozidriv 2 screw (Screw head with captive cable clamp) Markings conform with IEC 6947-1, IEC 6947-5-1, EN 55 and EN 5 standards Type Example: L S 7 5 P 4 1 B 1 1 L S P Limit Switch...LS Casing width: 3 mm...3 1 cable inlet by 1/2" NPT plastic adaptor delivered not mounted...5 Contact types: 11... 1 N.O. + 1 N.C. contacts 2... 2 N.O. contacts 2... 2 N.C. contacts Casing width: 4 mm...4 1 cable inlet for 1/2" NPT cable gland...5 Casing width: 6 mm...7 1 cable inlet by 1/2" NPT plastic adaptor + 1 cable inlet Pg 11 for additional 1/2" NPT plastic adaptor (on request)...5 Snap action: B... Snap (except for 2 N.O. contacts) Dependent (slow) action: L...Slow / Simultaneous D... Non-overlapping late make C... Overlapping early make Operating heads: (see panorama) 1... 98...Codes P...Plastic casing 11 AC

LS35M.., LS45M.. and LS75M.. Limit Switches Metal Casing NEMA-4X Applications Easy to use, electromechanical limit switches offer specific qualities: Visible operation. Able to switch strong currents (1 A conventional thermal current). Electrically separated contacts. Contact blocks with positive opening operation of the "N.C." normally closed contact(s) (symbol ). Precise operating points (consistency). Immune to electromagnetic disturbances. They are exceptional detection devices thanks to these characteristics: Presence/absence. Positioning and travel limit. Objects passing/counting. Description Limit switches, LS35M.. and LS75M.., which are made of zinc alloy (zamack), have a degree of protection NEMA-4X. Limit switches, LS45M.., which are made of aluminium alloy, have a degree of protection NEMA-4X. The casings come in 3 dimensions: LS35M... 3 mm width, LS45M... 4 mm width, LS75M... 6 mm width. Cover: Closed using 3 x M3 screws for 3 mm width Closed using 4 x M3 screws for 6 mm width Closed using 2 x M4 screws for 4 mm width One piece sealing gasket to ensure tightness Mounting the casing: 2 x M4 screws for 3 mm width 2 or 4 x M5 screws for 4 mm width 2 or 4 x M4 screws for 6 mm width Terminal for protective conductor placed near the cable inlet and marked: M3.5 (+, ) pozidriv 2 screw (Screw head with captive cable clamp) Electrical connection: 1 (LS35M), 1 (LS45M) or 3 (LS75M) cable inlets for 1/2 NPT cable gland Suitable for conduit connection only with use of adaptor sleeve optionally provided by manufacturer. (on request) A variety of operating heads: Plain plunger Roller plunger Roller lever, adjustable or not, etc. Assembled using 4 x M3 screws for 3 & 6 mm width Assembled using 4 x M4 screws for 4 mm width Casing: 3 mm width with standardized dimensions according to EN 547. 4 mm width with standardized dimensions according to EN 541. 6 mm width compatible with EN 547 (Fixing). Block of 2 contacts: Contact configuration: 1 N.O. + 1 N.C. or 2 N.O. or 2 N.C. Positive opening operation Snap action or slow action The 2 contacts are electrically separated Type Example: L S 3 5 M 4 1 B 1 1 L S M L11D Connecting terminals: M3.5 (+, ) pozidriv 2 screw (Screw head with captive cable clamp) Markings conform with IEC 6947-1, IEC 6947-5-1, EN 55 and EN 5 standards Limit Switch...LS Casing width: 3 mm...3 1 cable inlet for 1/2" NPT cable gland...5 Contact types: 11... 1 N.O. + 1 N.C. contacts 2... 2 N.O. contacts 2... 2 N.C. contacts Casing width: 4 mm...4 1 cable inlet for 1/2" NPT cable gland...5 Snap action: B... Snap (except for 2 N.O. contacts) Dependent (slow) action: L...Slow / Simultaneous D... Non-overlapping late make C... Overlapping early make Casing width: 6 mm (new casing)...7 3 cable inlets for 1/2" NPT cable gland...5 Operating heads: (see panorama) 1... 98...Codes M... Metal casing 12 AC

LS2..P.. Limit Switches Double insulation - Plastic Casing NEMA-1 35 mm Width 1SBC5 9296 2F32 LS25P: 1 cable output left / right Plastic Casing - NEMA-1 LS26P: 1 cable output bottom 35 mm Width Ordering Details Contact blocks Catalog number List price LS25P11B11 LS25P12B11 1SBC5 9366 2F32 B11 D11 Brass plain plunger (nickel plated) 1 - LS25P11B11-U 1 - LS26P11B11-U - 1 LS25P11D11-U - 1 LS26P11D11-U 1SBC5 93 2F32 Steel roller plunger (zinc plated) 1 - LS25P12B11-U 1 - LS26P12B11-U - 1 LS25P12D11-U - 1 LS26P12D11-U LS25P16B11 1SBC5 93 2F32 Brass plain plunger (nickel plated) with dust protection 1 - LS25P16B11-U 1 - LS26P16B11-U - 1 LS25P16D11-U - 1 LS26P16D11-U Brass plain plunger (zinc plated) with fi xing nuts LS25PB11 1SBC5 931 5F32 LS25PB11 LS25P41B11 1SBC5 933 2F32 1 - LS25PB11-U 1 - LS26PB11-U - 1 LS25PD11-U - 1 LS26PD11-U Steel roller plunger (zinc plated) with fi xing nuts 1 - LS25PB11-U 1 - LS26PB11-U - 1 LS25PD11-U - 1 LS26PD11-U ø plastic (polyacetal) roller lever 1 - LS25P41B11-U 1 - LS26P41B11-U - 1 LS25P41D11-U - 1 LS26P41D11-U Adjustable ø18 plastic (polyacetal) roller lever LS25P51B11 1SBC5 937 2F32 1 - LS25P51B11-U 1 - LS26P51B11-U - 1 LS25P51D11-U - 1 LS26P51D11-U Spring rod 1 - LS25P91B11-U 1 - LS26P91B11-U - 1 LS25P91D11-U - 1 LS26P91D11-U LS25P91B11 1SBC5 9338 2F32 Length cable code Cable Code length 1 m 1 2 m 2 5 m 5 1 m 1 Note: -U = cable UL 62 PVC maxi. 1 m Discount schedule DS-RM AC

LS35P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-3 mm Width 1 Cable inlet 1/2" NPT LS35P11B11 LS35P31B11 SB77C1 SB7726C1 Ordering Details Contact blocks Catalog number List price B11 D11 Steel plain plunger (zinc plated) 1 - LS35P11B11-1 LS35P11D11 ø11 plastic (polyacetal) roller plunger 1 - LS35PB11-1 LS35PD11 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) horizontal action 1 - LS35P31B11-1 LS35P31D11 LS35P41B11 LS35P52B11 SB7729C1 SB7732C1 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) vertical action 1 - LS35P32B11-1 LS35P32D11 ø18 plastic (polyacetal) roller lever 1 - LS35P41B11-1 LS35P41D11 ø5 rubber roller lever 1 - LS35P42B11-1 LS35P42D11 Adjustable ø18 plastic (polyacetal) roller lever 1 - LS35P51B11-1 LS35P51D11 Adjustable ø5 rubber roller lever 1 - LS35P52B11-1 LS35P52D11 Adjustable ø3 fibre-glass rod lever 1 - LS35P72B11-1 LS35P72D11 Spring rod 1 - LS35P91B11-1 LS35P91D11 SB7735C1 LS35P91B11 AC Discount schedule DS-RM

LS45P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-4 mm Width 1 Cable inlet 1/2" NPT Ordering Details Contact blocks Catalog number List price B11 D11 LS45P11B11 LS45PB11 LS45P51B11 SB7738C1 SB7739C1 SB7747C1 Steel plain plunger (zinc plated) 1 - LS45P11B11-1 LS45P11D11 ø12 stainless steel roller plunger 1 - LS45PB11-1 LS45PD11 ø plastic (polyacetal) roller lever on steel plunger 1 - LS45P31B11-1 LS45P31D11 ø plastic (polyacetal) roller lever 1 - LS45P41B11-1 LS45P41D11 ø5 rubber roller lever 1 - LS45P44B11-1 LS45P44D11 Adjustable ø plastic (polyacetal) roller lever 1 - LS45P51B11-1 LS45P51D11 Adjustable ø5 rubber roller lever 1 - LS45P54B11-1 LS45P54D11 Adjustable ø6 plastic (polyacetal) rod lever 1 - LS45P72B11-1 LS45P72D11 SB7754C1 LS45P72B11 Discount schedule DS-RM 15 AC

LS75P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-6 mm Width 2 Cable inlet 1/2" NPT LS75P11B11 LS75P31B11 LS75P41B11 1SBC5 8586 5F32 1SBC5 8589 4F32 1SBC5 8592 4F32 Ordering Details Contact blocks Catalog number List price B11 D11 Steel plain plunger (zinc plated) 1 - LS75P11B11-1 LS75P11D11 ø11 plastic (polyacetal) roller plunger 1 - LS75PB11-1 LS75PD11 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) 1 - LS75P31B11-1 LS75P31D11 ø18 plastic (polyacetal) roller lever 1 - LS75P41B11-1 LS75P41D11 ø5 rubber roller lever 1 - LS75P42B11-1 LS75P42D11 Adjustable ø18 plastic (polyacetal) roller lever 1 - LS75P51B11-1 LS75P51D11 Adjustable ø5 rubber roller lever 1 - LS75P52B11-1 LS75P52D11 1SBC5 86 5F32 Adjustable ø3 fibre-glass rod lever 1 - LS75P72B11-1 LS75P72D11 Spring rod 1 - LS75P91B11-1 LS35P91D11 LS75P91B11 Pull action with ring 1 - LS75P98B11-A - 1 LS75P98D11-A 1SBC5 862 4F32 LS75P98B11-A 16 AC Discount schedule DS-RM

LS25M.. Limit Switches Metal Casing NEMA-4X - 35 mm Width 1SBC5 9296 2F32 LS25M11B11 LS25M16B11 1SBC5 931 5F32 LS25MB11 LS25M51B11 1SBC5 937 2F32 1SBC5 93 2F32 LS25M12B11 LS25MB11 LS25M41B11 1SBC5 9366 2F32 1SBC5 93 2F32 1SBC5 933 2F32 LS25M: 1 cable output left/right LS26M: 1 cable output bottom Ordering Details Metal Casing - NEMA-4X 35 mm Width Contact blocks Catalog number List price B11 D11 Brass plain plunger (nickel plated) 1 - LS25M11B11-U 1 - LS26M11B11-U - 1 LS25M11D11-U - 1 LS26M11D11-U Steel roller plunger (zinc plated) 1 - LS25M12B11-U 1 - LS26M12B11-U - 1 LS25M12D11-U - 1 LS26M12D11-U Brass plain plunger (nickel plated) with dust protection 1 - LS25M16B11-U 1 - LS26M16B11-U - 1 LS25M16D11-U - 1 LS26M16D11-U Brass plain plunger (nickel plated) with fi xing nuts 1 - LS25MB11-U 1 - LS26MB11-U - 1 LS25MD11-U - 1 LS26MD11-U Steel roller plunger (zinc plated) with fi xing nuts 1 - LS25MB11-U 1 - LS26MB11-U - 1 LS25MD11-U - 1 LS26MD11-U ø plastic (polyacetal) roller lever 1 - LS25M41B11-U 1 - LS26M41B11-U - 1 LS25M41D11-U - 1 LS26M41D11-U Adjustable ø18 plastic (polyacetal) roller lever 1 - LS25M51B11-U 1 - LS26M51B11-U - 1 LS25M51D11-U - 1 LS26M51D11-U Spring rod 1 - LS25M91B11-U 1 - LS26M91B11-U - 1 LS25M91D11-U - 1 LS26M91D11-U LS25M91B11 1SBC5 9338 2F32 Length cable code Cable Code length 1 m 1 2 m 2 5 m 5 1 m 1 Note: -U = cable UL 62 PVC maxi. 1 m Discount schedule DS-RM 17 AC

LS35M.. Limit Switches Metal Casing NEMA-4X - 3 mm Width 1 Cable inlet 1/2" NPT Ordering Details 1SBC5 8567 3F32 Contact blocks Catalog number List price B11 D11 LS35M11B11 Steel plain plunger (zinc plated) 1 - LS35M11B11-1 LS35M11D11 Steel roller plunger (zinc plated) 1 - LS35M12B11 LS35M12B11 1SBC5 8569 3F32-1 LS35M12D11 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) horizontal action 1 - LS35M31B11-1 LS35M31D11 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) vertical action 1 - LS35M32B11-1 LS35M32D11 ø plastic (polyacetal) roller lever on steel plunger (zinc plated) 1 - LS35M38B11 LS35M38B11 1SBC5 8572 3F32-1 LS35M38D11 ø18 plastic (polyacetal) roller lever 1 - LS35M41B11-1 LS35M41D11 ø5 rubber roller lever 1 - LS35M42B11-1 LS35M42D11 Adjustable ø18 plastic (polyacetal) roller lever 1 - LS35M51B11 LS35M41B11 1SBC5 8576 3F32 1SBC5 8573 3F32-1 LS35M51D11 Adjustable ø5 rubber roller lever 1 - LS35M52B11-1 LS35M52D11 Spring rod 1 - LS35M91B11-1 LS35M91D11 LS35M51B11 18 AC Discount schedule DS-RM

LS45M.. Limit Switches Metal Casing NEMA-4X - 4 mm Width 1 Cable inlet 1/2" NPT LS45M11B11 LS45M41B11 LS45M51B11 SB7758C1 SB7767C1 SB7771C1 Ordering Details Contact blocks Catalog number List price B11 D11 Stainless steel plain plunger 1 - LS45M11B11-1 LS45M11D11 ø12 stainless steel roller plunger 1 - LS45MB11-1 LS45MD11 ø plastic (polyacetal) roller lever on stainless steel plunger 1 - LS45M31B11-1 LS45M31D11 ø plastic (polyacetal) roller lever 1 - LS45M41B11-1 LS45M41D11 ø stainless steel roller lever 1 - LS45M42B11-1 LS45M42D11 Adjustable ø plastic (polyacetal) roller lever 1 - LS45M51B11-1 LS45M51D11 Adjustable ø6 plastic (polyacetal) rod lever 1 - LS45M72B11-1 LS45M72D11 Spring rod 1 - LS45M91B11-1 LS45M91D11 SBC779C1 LS45M91B11 Discount schedule DS-RM 19 AC

LS45M Limit Switches Metal Casing NEMA-4X - 4 mm Width Synoptic of Separate Elements Bodies with contact block Operating heads with actuator LSTE54 LSTE93 LSTE72 (D Shape) LSTE44 LSTE53 LSTE71 (D Shape) LSTE23 (G Shape) LSTE (F Shape) LSTE33 LSTE43 (A Shape) LSTE92 LSTE52 LSTE (G Shape) LSTE12 (B Shape) LSTE32 LSTE42 (A Shape) LSTE62 LSTE (C Shape) LSTE11 (B Shape) LSTE31 LSTE41 (A Shape) LSTE51 LSTE91 LSTE61 Rectilinear motion Angular motion LSTE... rectilinear motion heads To be actuated from end. With plunger (plain, lateral plain or ball): LSTE11, LSTE12 and LSTE. To be actuated by 3 cam translation. With roller plunger: LSTE, LSTE and LSTE23. To be actuated unidirectionally by 3 cam translation. With roller lever on stainless steel plunger: LSTE31... LSTE33. LSTE... angular motion heads To be actuated by 3 cam translation. With roller lever: LSTE41... LSTE54. To be actuated by fully directional translation movement. With rod or spring lever: LSTE61... LSTE72. To be actuated multidirectionally. With spring rod: LSTE91... LSTE93. Bodies with contact block LS45MB11, LS45MD11 : Suitable for positive opening operation (IEC 6947-5-1 and EN 541). Warning! The positive opening operation of limit switch is only guaranteed if the elements noted with are fitted. 2 AC

LS45M Limit Switches Metal Casing NEMA-4X - 4 mm Width Synoptic of Separate Elements (continued) Bodies with contact block Angular motion heads (without actuator) Separate actuators Separate contact blocks LSA4X44 LSA4X54 LSA4X72 (D Shape) LSA4X43 (A Shape) LSA4X53 LSA4X71 (D Shape) LSA4X42 (A Shape) LSA4X52 LSA4X62 LSA4X41 (A Shape) LSA4X51 LSA4X61 Roller levers Adjustable or flexible levers LSTE4 LSTE5 LSTE5 angular motion head For flexible or adjustable levers LSA4X51... LSA4X54, LSA4X61, LSA4X62, LSA4X71 and LSA4X72. LSTE4 angular motion head For roller levers (non-adustable) LSA4X41... LSA4X44 Bodies with contact block LS45MB11, LS45MD11 : Suitable for positive opening operation (IEC 6947-5-1 and EN 541) Contact blocks LSC4XB11, LSC4XD11 Warning! The positive opening operation of limit switch is only guaranteed if the elements noted with are fitted. AC

LS45M Limit Switches Metal Casing NEMA-4X - 4 mm Width, 1/2" NPT Separate Elements "N.C." contact with positive opening operation or element (subassembly, head, lever) suitable for positive opening operation. Warning! The positive opening operation of limit switch is only guaranteed if the elements noted with are fitted. Ordering Details Contact blocks Catalog number List Price max. B11 D11 m/s LSTE11 LSTE SB83S3 SB832S3 LSTE SB833S3 SB8358S3 LSTE SB8356S3 Positive opening operation 1 LS45MB11 1 LS45MD11 Actuation speed LSTE41 SB8354S3 Rectilinear motion heads with actuator To be actuated from end Stainless steel plain plunger.5 LSTE11 Stainless steel ball plunger.5 LSTE12 Stainless steel lateral plain plunger.5 LSTE SB836S3 To be actuated by 3 cam Stainless steel roller plunger.5 LSTE Stainless steel lateral plunger with vertical roller.5 LSTE Stainless steel lateral plunger with horizontal roller.5 LSTE23 LS45MB11 To be actuated unidirectionally by 3 cam ø mm polyamide roller lever on stainless steel plunger 1.5 LSTE31 ø mm stainless steel roller lever on stainless steel plunger 1.5 LSTE32 ø mm steel ball-bearing roller lever on stainless steel plunger 1.5 LSTE33 LSTE52 SB8364S2 SB837S1 Angular motion heads with actuator To be actuated by 3 cam ø mm polyamide roller lever (1) 1.5 LSTE41 ø mm stainless steel roller lever (1) 1.5 LSTE42 ø mm steel ball-bearing roller lever (1) 1.5 LSTE43 ø 45 mm rubber roller lever (1) 1.5 LSTE44 Adjustable ø mm polyamide roller lever (1) 1.5 LSTE51 Adjustable ø mm stainless steel roller lever (1) 1.5 LSTE52 Adjustable ø mm steel ball-bearing roller lever (1) 1.5 LSTE53 Adjustable ø 45 mm rubber roller lever (1) 1.5 LSTE54 To be actuated by fully directional translation movement Stainless steel flexible lever with insulated end (1) 1 LSTE61 Stainless steel coil spring lever (1) 1 LSTE62 Adjustable ø 3 mm stainless steel rod lever, 195 mm length (1) 1 LSTE71 Adjustable ø 6 mm polyamide rod lever, 195 mm length (1) 1 LSTE72 Adjustable ø 6 mm fibre-glass rod lever, 195 mm length (1) 1 LSTE73 LSTE91 Multidirectionnal angular motion heads (to be actuated by fully directional translation movement) Stainless steel spring rod 1 LSTE91 Stainless steel flexible rod with insulated end 1 LSTE92 Stainless steel coil spring rod 1 LSTE93 (1) Free position adjustment of lever 9 by 9 over 36 SB8369S1 LSTE32 LSTE72 AC

LS45M Limit Switches Metal Casing NEMA-4X - 4 mm Width, 1/2" NPT Separate Elements LSTE4 SB834S3 Ordering Details Contact blocks Catalog number List Price Positive opening operation Lever round turning L296D2 L297D2 L298D2 L299D2 L594D L272D2 Actuation speed max. B11 D11 m/s Angular motion head without actuator, for non-adjustable roller levers (delivered with M5 nylstop nut) 1.5 LSTE4 SB8297S2 LSA4X41 SB8492S1 LSA4X52 SB8494S1 SB8496S1 LSA4X61 LSA4X71 LSC4XB11 SB835S3 Actuators for angular motion head LSTE4 ø mm polyamide roller lever (1) LSA4X41 ø mm stainless steel roller lever (1) LSA4X42 ø mm steel ball-bearing roller lever (1) LSA4X43 ø 45 mm rubber roller lever (1) LSA4X44 Angular motion head without actuator, for fexible or adjustable levers (delivered with M5 nylstop nut and adaptation parts) 1 to LSTE5 1.5 acc. to lever Actuators for angular motion head LSTE5 Adjustable ø mm polyamide roller lever (1) LSA4X51 Adjustable ø mm stainless steel roller lever (1) LSA4X52 Adjustable ø mm steel ball-bearing roller lever (1) LSA4X53 Adjustable ø 45 mm rubber roller lever (1) LSA4X54 Stainless steel flexible lever with insulated end (1) LSA4X61 Stainless steel coil spring lever (1) LSA4X62 Adjustable ø 3 mm stainless steel rod lever, 195 mm length (1) LSA4X71 Adjustable ø 6 mm polyamide rod lever, 195 mm length (1) LSA4X72 Adjustable ø 6 mm fibre-glass rod lever, 195 mm length (1) LSA4X73 Contact blocks (with adaptor) 1 N.C. + 1 N.O. 2-pole snap action LSC4XB11 1 N.C. + 1 N.O. 2-pole non-overlapping slow action LSC4XD11 Head orientation L278D2 Free position adjustment 9 in 9 of lever Operating mode selection 23 AC

LS75M.. Limit Switches Metal Casing NEMA-4X - 6 mm Width 3 Cable inlet 1/2" NPT Ordering Details 1SBC5 863 4F32 Contact blocks Catalog number List price B11 D11 LS75M11B11 Steel plain plunger (zinc plated) 1 - LS75M11B11-1 LS75M11D11 LS75M12B11 LS75M38B11 1SBC5 864 4F32 1SBC5 867 4F32 Steel roller plunger (zinc plated) 1 - LS75M12B11-1 LS75M12D11 ø12.5 plastic (polyacetal) roller lever on steel plunger (zinc plated) horizontal action 1 - LS75M31B11-1 LS75M31D11 ø plastic (polyacetal) roller lever on steel plunger (zinc plated) 1 - LS75M38B11-1 LS75M38D11 ø18 plastic (polyacetal) roller with bent lever 1 - LS75M45B11-1 LS75M45D11 Adjustable ø3 stainless steel rod lever 1 - LS75M71B11-1 LS75M71D11 Spring rod 1 - LS75M91B11-1 LS75M91D11 Pull action with ring 1 - LS75M98B11-A 1SBC5 861 4F32-1 LS75M98D11-A LS75M45B11 1SBC5 862 5F32 LS75M98B11-A 24 AC Discount schedule DS-RM

Limit Switches Plastic or Metal Casing Travel and Diagrams P O C F1 C1 C4 P R CP P A C3 CL PP C2 L L338D C C C L1236D C: Travel in millimetres C: Travel in degrees P O Free position: position of the switch actuator when no external force is exerted on it. P A Operating position: position of the switch actuator, under the effect of force F1, when the contacts leave their initial free position. P P Positive opening position: position of the switch actuator from which positive opening is ensured. L Max. travel position: maximum acceptable travel position of the switch actuator under the effect of a force F1. P R Release position: position of the switch actuator when the contacts return to their initial free position. C 1 Pre-travel (average travel): distance between the free position P O and the operating position P A. C P Positive opening travel: minimum travel of the switch actuator, from the free position, to ensure positive opening operation of the normally closed contact (N.C.). C 2 Over-travel (average travel): distance between the operating position P A and the max. travel position L. C L Max. travel (maximum travel): distance between the free position P O and the max. travel position L. C 3 Differential travel (C1-C4) (average travel): travel difference of the switch actuator between the operating position P A and the release position P R. C 4 Release travel (average travel): distance between the release position P R and the free position P O. Diagram for snap action contacts: Diagram for non-overlapping slow action contacts: C4 C1 C3 C1-1 C1-2 CP CP CL CL Contacts position PP PP Actuation Release Actuation and release Contact closed Contact open Contacts identification (example) Note: for slow action contacts, C 3 =, C 1-1 = pre-travel of contact, C 1-2 = pre-travel of contact. Examples: LS35MB11 (snap action contacts) Diagram in millimetres/cam travel 3. 4.8 7.7 9.6 mm LS35M41B11 (snap action contacts) Diagram in degrees/lever rotation 9 5 87 LS35M11D11 (non-overlapping slow action contacts) Diagram in millimetres/plunger travel 1.9 3.5 2.8 5.6 mm 25 AC

General Technical Data LS25... LS26 Prewired Limit Switches Plastic Casing NEMA-1 and Metal Casing NEMA-4X Technical Data Plastic Casing Metal Casing Standards IEC 6947-1, IEC 6947-5-1, EN 6947-1, EN 6947-5-1, UL 58 and CSA C-2 n Certifications - Approvals UL - CSA Air temperature near the device during operation C 25... + 7 25... + 7 for storage C 4... + 7 4... + 7 Climatic withstand According to IEC 68-2-3 and salty mist according to IEC 68-2-11 Mounting positions Shock withstand (according to IEC 68-2-27 and EN 668-2-27) All positions are authorized 25g* (1/2 sinusoidal shock for 11 ms) no change in contact position Resistance to vibrations (acc. to IEC 68-2-6 and EN 668-2-6) 25g** (1... 5 Hz) no change in position of contacts greater than 1 µs Protection against electrical shocks (acc. to IEC 536) Class II Class I Degree of protection (according to IEC 529 and EN 6529) IP67 Degree of protection (according to UL 5 and NEMA) Type 1 Enclosure (indoor use) Type 4-4x - 6 Enclosure (Outdoor use) Consistency (measured over 1 million operations) Electrical Data.1 mm (upon closing point) Rated insulation voltage U i according to IEC 6947-1 and EN 6947-1 V 4 (degree of pollution 3) according to UL 58, CSA C-2 n V 3 Rated impulse withstand voltage U imp kv 4 (according to IEC 6947-1 and EN 6947-1) Conventional enclosed thermal current I the A 5 (according to IEC 6947-5-1 and EN 6947-5-1 ) θ < 4 C Short-circuit protection fuses A 5 Rated operational current I e / AC-15 acc. to IEC 6947-5-1 24 V - 5/6 Hz A 5. 12 V - 5/6 Hz A 3. 24 V - 5/6 Hz A 1.5 acc. to UL 58, CSA C n B 3 I e / DC- acc. to IEC 6947-5-1 24 V - d.c. A 1.1 125 V - d.c. A. 25 V - d.c. A.1 acc. to UL 58, CSA C n R 3 Positivity Contacts with positive opening operation as per IEC 6947-5-1 chapter 3 and EN 6947-5-1 Resistance between contacts mω 25 Pre-wired connection mm 2 / AWG 4 x.75 mm 2 / 4 x AWG 18 5 x.75 mm 2 / 5 x AWG 18 Type of cable UL 62-1581 (PVC) Black - Ø ext. 7.2 +.2 Black - Ø ext. 8.2 +.2 Terminal marking According to EN 5 Mechanical durability 1 Millions of operations Electrical durability (according to IEC 6947-5-1 appendix C) Utilization categories AC-15 and DC- (See curves and values below) max. switching frequency Cycles/h 36 load factor.5 * Shock: 25g for LS25P/M..,... LS26P/M.. with D11 contact block 5g for LS25P/M..,... LS26P/M.. with B11 contact block **Vibrations: except for LS25P/M93... LS26P/M93 : 15 g Electrical durability for AC-15 utilization category Millions of operating cycles 5 3 2 1.5.3.2.1.2.3.5 Electrical durability for DC- utilization category Snap action Slow action Snap action Slow action 23-24 48 12-24 Ithe L83DG 1 2 3 5 1 Current (A) Millions of operating cycles 5 3 2 1.5.3.2.1 23 11 12-24 - 48 Ithe 1 2 3 5 1 Current (A) L84D2G Power breaking for a durability of 5 million operating cycles Voltage 24 V 5.7 W.2 W Voltage 48 V 4.1 W 5.4 W Voltage 11 V 2.2 W 3.6 W 26 AC

General Technical Data LS35, LS45 and LS75 Limit Switches Plastic Casing NEMA-1 and Metal Casing NEMA-4X Technical Data Plastic Casing } } { { Metal Casing Standards IEC 6947-1, IEC 6947-5-1, EN 6947-1, EN 6947-5-1, UL 58 and CSA C-2 n Certifications - Approvals UL - CSA - CCC Air temperature near the device during operation C 25... + 7 25... + 7 for storage C 3... + 8 3... + 8 Climatic withstand According to IEC 68-2-3 and salty mist according to IEC 68-2-11 Mounting positions All positions are authorized Shock withstand (according to IEC 68-2-27 and EN 668-2-27) g 5g* (1/2 sinusoidal shock for 11 ms) no change in contact position Resistance to vibrations (acc. to IEC 68-2-6 and EN 668-2-6) g 25g (1... 5 Hz) no change in position of contacts greater than 1 µs Protection against electrical shocks (acc. to IEC 536) Class II Class I Degree of protection (according to IEC 529 and NEMA) IP65, NEMA 1 IP66 **, NEMA 4, 4X Consistency (measured over 1 million operations).1 mm (upon closing point).1 mm (upon closing point) Electrical Data Rated insulation voltage U i according to IEC 6947-1 and EN 6947-1 V 5 (degree of pollution 3) 4 (LS35M.. & LS75M..), 5 (LS45M..) - (degree of pollution 3) according to UL 58, CSA C-2 n V 6 3 (LS35M.. & LS75M..), 6 (LS45M..) Rated impulse withstand voltage U imp kv 6 (according to IEC 6947-1 and NEMA Conventional enclosed thermal current I the A 1 (LS45M..) (according to IEC 6947-5-1 and EN 6947-5-1 ) θ < 4 C Short-circuit protection fuses A 1 (LS45M..) Rated operational current I e / AC-15 acc. to IEC 6947-5-1 24 V - 5/6 Hz A 1 V - 5/6 Hz A 5.5 23 V - 5/6 Hz A 3.1 24 V - 5/6 Hz A 3 4 V - 5/6 Hz A 1.8 acc. to UL 58, CSA C n A 6 A 3 (LS35M.. & LS75M..), A 6 (LS45M..) I e / DC- acc. to IEC 6947-5-1 24 V - d.c. A 2.8 11 V - d.c. A.6 25 V - d.c. A.27 acc. to UL 58, CSA C n Q 6 Q 3 (LS35M.. & LS75M..), Q 6 (LS45M..) Positivity Contacts with positive opening operation as per IEC 6947-5-1 chapter 3 and EN 6947-5-1 Resistance between contacts mω 25 Mechanical durability Millions 15 35 1...12 ; 3...38 15 35 11...12 ; 31...38 of 1 LS P ; 41...46 ; 51...55 ; 61... 1 LS M ; 41...46 ; 51...55 ; 61...78 operations > 5 75 ; 91...92 ; 98 > 5 75 ; 91...92 ; 98 Millions 15 11 ; 12 ; 31...33 3 11... ;...23 ; 31...33 of 1 LS 45 P ; 41...44 ; 51...55 ; 61...74 25 LS 45 M 41...44 ; 51...55 ; 61...74 operations > 5 ; 19 ; 34...36 ; 91...93 1 1...93 Electrical durability (according to IEC 6947-5-1 appendix C) Utilization categories AC-15 and DC- (see curves and values below) max. switching frequency Cycles/h 36 load factor.5 Connecting data of contact blocks Connecting terminals M3.5 (+, ) pozidriv 2 screw with cable clamp Connecting capacity 1 or 2 x mm 2 / AWG.5 mm 2 / AWG 2 to 2.5 mm 2 / AWG Terminal marking According to EN 5 * Except for LS35M42, M52 and M55 - LS35P42, P52 and P55 - LS75M42, M52 and M55 - LS75P42, P52 and P55: 25g ** Except for LS35M52, M55, M73, M74 and M92 - LS75M52, M55, M73, M74 and M92 - LS45M54, M72, M92 and M93 : the degree of protection is IP65. Electrical durability for AC-15 utilization category Millions of operating cycles 5 3 2 1.5.3.2 23-24 4.1.2.3.5 Electrical durability for DC- utilization category Snap action Slow action Snap action Slow action 48 12-24 L351DG 1 2 3 5 1 Current (A) Millions of operating cycles 5 3 2 1.5.3.2.1 23 1 2 3 5 1 Current (A) 48 12-24 L35DG } } { { Power breaking for a durability of 5 million operating cycles Voltage 24 V 9.5 W 12 W Voltage 48 V 6.8 W W Voltage 11 V 3.6 W 6 W 27 AC

LS2..P.. and LS2..M.. Limit Switches Plastic Casing Prewired NEMA-1 and Metal Casing - NEMA-4X - 35 mm Width Movement to be detected: On end 3 Cam Trans. On end For Plastic Casing: Cable: 4 x AWG 18 Length: 1 m (Other lengths see ordering details) For Metal Casing: Cable: 5 x AWG 18 Length: 1 m (Other lengths see ordering details) Actuator Metal plunger Metal Roller plunger Metal plunger Metal plunger (with dust protection cup) with fi xing nuts (N.C. contact with positive opening operation) Maximum actuation speed.5 m/s.1 m/s.5 m/s.5 m/s Min. force / torque: - actuation 15 N 1 N 15 N 15 N - positive opening operation 3 N 3 N 3 N 3 N Additional Technical Data Cable output left / right code... 5 Cable output bottom code... 6 Plastic casing... P Metal casing... M Type to be completed with the above codes Snap action contacts Type LS2 11B11- U1 LS2 12B11- U1 LS2 16B11- U1 LS2 B11- U1 BN BU BK BK 1. 1.9 4. 5. mm 1.7 3.3 6.9 8.7 mm 1. 1.9 4. 5. mm 1. 1.9 4. 5. mm Non-overlapping Type LS2 11D11- U1 LS2 12D11- U1 LS2 16D11- U1 LS2 D11- U1 Slow action contacts BN BK 1.9 3.4 5. mm 3.3 5.9 8.7 mm 1.9 3.4 5. mm 1.9 3.4 5. mm BU BK 3.2 5.5 3.2 3.2 Weight (1) (packing per unit) kg.125..125. (1) add.5 kg with metal casing. Closed contact / Open contact Dimensions (mm) 35 49 4 9 3 25 O 4.3 O 8.2 4.5 L71D 49 16 L72D Tightening torque of nuts : 5 N.m Distance between nuts : 9 mm Nuts thickness : 3 mm 49 4 9 35 3 25 O 4.3 11 8 12 2 L34D 6 8 L35D 12 3 L36D 7 8 3.5 L37D 2.5 7 12 L5D 29.5 69.5 8 L4D 25 M12x1 8 34 L42D 74 8 L43D O 8.2 L68D 28 AC

LS2..P.. and LS2..M.. Limit Switches Plastic Casing Prewired NEMA-1 and Metal Casing - NEMA-4X - 35 mm Width Movement to be detected: 3 Cam Translation Multidirectional For Plastic Casing: Cable: 4 x AWG 18 Length: 1 m (Other lengths see ordering details) For Metal Casing: Cable: 5 x AWG 18 Length: 1 m (Other lengths see ordering details) Actuator Metal Roller plunger ø plastic roller lever Adjustable ø18 Spring rod with fi xing nuts plastic roller lever (N.C. contact with positive opening operation) - Maximum actuation speed.1 m/s 1.5 m/s 1.5 m/s 1. m/s Min. force / torque: - actuation 1 N.8 N.m.8 N.m.1 N.m - positive opening operation 3 N.28 N.m.28 N.m - Additional Technical Data Cable output left / right code... 5 Cable output bottom code... 6 Plastic casing... P Metal casing... M Type to be completed with the above codes Snap action contacts Type LS2 B11- U1 LS2 41B11- U1 LS2 51B11- U1 LS2 91B11- U1 BN BU BK BK 1.7 3.3 6.9 8.7 mm 26 58 74 26 58 74 5 Non-overlapping Type LS2 D11- U1 LS2 41D11- U1 LS2 51D11- U1 - Slow action contacts BN BK 3.3 5.9 8.7 mm 27 49 74 27 49 74 5.5 45 BU BK 45 - Weight (1) (packing per unit) kg.2.2.23.235 (1) add.5 kg with metal casing. Closed contact / Open contact Dimensions (mm) 35 49 4 9 3 25 35 3 25 O 4.3 O 4.3 O 8.2 4.5 L71D 49 16 L72D Tightening torque of nuts : 5 N.m Distance between nuts : 9 mm Nuts thickness : 3 mm 35.8 M12x1 1.4 44.8 8 3.5 52 3 O 27 24 4.5 48...118 3 O 18 19...91 34.4 6.5 5.5 1.5 7 181.5 49 4 9 O 8.2 L68D L44D 84.8 L45D 18 L48D 92 66.5 L49D 29.5 18 L52D 66.5 36.1 38.9 L53D L62D L63D 29 AC

LS35P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-3 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. 3 Unidirectional Cam Translation Actuator Metal plunger ø11 plastic ø12.5 plastic roller lever ø12.5 plastic roller lever roller plunger on steel plunger on steel plunger Conformity / (N.C. contact with positive opening operation) EN 547 (B shape) EN 547 (C shape) EN 547 (E shape) Maximum actuation speed.5 m/s.3 m/s 1 m/s 1 m/s Min. force / torque: - actuation 15 N 12 N 7 N 7 N - positive opening operation 45 N 41 N 24 N 24 N Additional Technical Data Snap action contacts Type LS35P11B11 LS35PB11 LS35P31B11 LS35P32B11 1.7 2.7 4.3 5.6 mm 3. 4.8 7.7 9.6 mm 4.9 9..5. mm 4.9 9..5 Non-overlapping Type LS35P11D11 LS35PD11 LS35P31D11 LS35P32D11 Slow action contacts 1.9 3.5 2.8 5.6 mm Weight (packing per unit) kg.7.7.7.75 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 3.4 6.3 5.1 9.6 mm 6. 1.5 8.6. mm 6. 1.5 8.6. mm. mm Dimensions (mm) O 4 2 12.5 24.5 4 3.3 53 L86D entrée de câble 15 3 L1289DF O 8 2 L88D 73 12.5 L89D 2 3 O 11 31 L9D 84 12.5 3.5 L91D 31 2 19.5 3 O12.5 L96D 39 92 12.5 5.2 L97D 3 2 29 O 12.5 39 19.5 L98D 92 12.5 5.2 L99D 3 AC

LS35P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-3 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT 3 Cam Translation Movement Fully Direction Trans. Multidirectional ø18 plastic ø5 rubber Adjustable ø18 Adjustable ø5 Adjustable ø3 Spring rod roller lever roller lever plastic roller lever rubber roller lever fibre-glass rod lever lever EN 547 (A shape) 1.5 m/s 1.5 m/s 1.5 m/s 1.5 m/s 1.5 m/s 1 m/s.1 N.m.1 N.m.1 N.m.1 N.m.1 N.m.12 N.m.32 N.m.32 N.m.32 N.m.32 N.m.32 N.m LS35P41B11 LS35P42B11 LS35P51B11 LS35P52B11 LS35P72B11 LS35P91B11 17 31 47 74 17 31 47 74 17 31 47 74 17 31 47 74 17 31 47 74 12 23 36 LS35P41D11 LS35P42D11 LS35P51D11 LS35P52D11 LS35P72D11 LS35P91D11 37 3 74 37 3 74 37 3 74 37 3 74 37 3 74 36.9.12.1..1.8 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact O 18 17.5 53 16 45 4 15 36 5.5 O 5 17.5 69 1 51 43.5 36 9 O 18 17.5 45.5...117.5 98.5...17.5 45.5 41 34 5.5 42 O 5 17.5 72.5...1 125.5... 184 52 44.5 32.5 9 42 O 6 17.5 Maxi 177.5 Maxi 23.5 36 17 5 188 O 1.2 O 6.3 L1D L11D L12D LD LD L15D L16D L17D L11D 41 L111D L112D L1D 31 AC

LS45P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-4 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. Unidirectional 3 Cam Translat. Actuator Metal plunger ø12 stainless steel Polyamide roller lever ø plastic roller plunger on steel plunger roller lever Conformity / (N.C. contact with positive opening operation) EN 541 (B shape) EN 541 (C shape) EN 541 (A shape) Maximum actuation speed.5 m/s.5 m/s 1 m/s 1.5 m/s Min. force / torque: - actuation N N 8 N.15 N.m - positive opening operation 45 N 4 N 4 N.3 N.m Additional Technical Data Snap action contacts Type LS45P11B11 LS45PB11 LS45P31B11 LS45P41B11 1. 2.2 3.8 5.9 mm 2.4 4.6 7.5 1.5 mm 3.8 6.8 11.3 17. mm 19 31 47 Non-overlapping Type LS45P11D11 LS45PD11 LS45P31D11 LS45P41D11 Slow action contacts 1.3 2.9 2.1 5.9 mm Weight (packing per unit) kg..5.175.185 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 3.1 6. 4.4 1.5 mm 4.9 9.4 6.3 17. mm 37 3 9 9 Dimensions (mm) 5.4 15.5 74 7.4 O 5.4 7 6 cable inlet 6.4 O 1 37 15.5 2 44 3 O 12 5 117 15.5 5 O 1 48.5 2 31.5 27 3 O 54 1 15.5 6 63 O 59 53.7 38.2 52 6 3 41 L8D 17 3.5 4.5 L129DG L1D L11D LD L15D L62D L63D L16D L17D 32 AC

LS45P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-4 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: 3 Cam Translation Movement Fully Direction Trans. Actuator ø5 rubber roller Adjustable ø Adjustable ø5 Adjustable ø6 lever plastic roller lever rubber roller lever plastic rod lever Conformity / (N.C. contact with positive opening operation) EN 541 (D shape) Maximum actuation speed 1.5 m/s 1.5 m/s 1.5 m/s 1.5 m/s Min. force / torque: - actuation.15 N.m.15 N.m.15 N.m.15 N.m - positive opening operation.3 N.m.3 N.m.3 N.m.3 N.m Additional Technical Data Snap action contacts Type LS45P44B11 LS45P51B11 LS45P54B11 LS45P72B11 19 31 47 9 19 31 47 9 19 31 47 9 19 31 47 Non-overlapping Type LS45P44D11 LS45P51D11 LS45P54D11 LS45P72D11 Slow action contacts 37 3 9 Weight (packing per unit) kg.25.19.2.185 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 37 3 9 37 3 9 37 3 9 9 Dimensions (mm) 74 7.4 O 5.4 5.4 7 6 cable inlet 15.5 6.4 77 O 5 4 64.5 57 9 68... 124 O 5... 191 6 55 6 46 82... 8 Ø 5 9... 25 65 57.5 9 43.5 Maxi 7 277 Maxi 5.5 O 6 2 3 41 L8D 17 3.5 4.5 L129DG LD 52 L23D L24D 61.5 L25D L3D 61.5 L31D L38D 61.5 L39D 33 AC

LS75P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-6 mm Width 2 Cable Inlets for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. Unidirectional 3 Cam Translat. Actuator Metal plunger ø11 plastic ø12.5 plastic roller lever ø18 plastic roller plunger on steel plunger roller lever Conformity / (N.C. contact with positive opening operation) Maximum actuation speed.5 m/s.3 m/s 1 m/s 1.5 m/s Min. force / torque: - actuation 15 N 12 N 7 N.1 N.m - positive opening operation 45 N 41 N 24 N.32 N.m Additional Technical Data Snap action contacts Type LS75P11B11 LS75PB11 LS75P31B11 LS75P41B11 1.7 2.7 4.3 5.6 mm 3. 4.8 7.7 9.6 mm 4.9 9..5. mm 17 31 47 Non-overlapping Type LS75P11D11 LS75PD11 LS75P31D11 LS75P41D11 Slow action contacts 1.9 3.5 2.8 5.6 mm Weight (packing per unit) kg.1.1.15.125 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 3.4 6.3 5.1 9.6 mm 6. 1.5 8.6. mm 37 3 74 74 Dimensions (mm) O 4 4 12.5 2 4 42 46 cable inlet O 8 2 12.5 2 25 3 O 11 31 12.5 3.5 39 O 12.5 3 31 2 12.5 5 53 O 18 17.5 45 4 15 5.5 5 57 L115D 33 L1291DG L939D 66 L94D L941D 77 L942D L945D 85 L946D L951D 99 36 L952D 34 AC

LS75P.. Limit Switches Double Insulation - Plastic Casing NEMA-1-6 mm Width 2 Cable Inlets for Cable Gland, 1/2" NPT 3 Cam Translation Movement Fully Direction Trans. Multidirectional Pull action ø5 rubber Adjustable ø18 Adjustable ø5 Adjustable ø3 Spring rod Pull action roller lever plastic roller lever rubber roller lever fibre-glass rod lever lever with ring 1.5 m/s 1.5 m/s 1.5 m/s 1.5 m/s 1 m/s.5 m/s.1 N.m.1 N.m.1 N.m.1 N.m.12 N.m 3 N.32 N.m.32 N.m.32 N.m.32 N.m LS75P42B11 LS75P51B11 LS75P52B11 LS75P72B11 LS75P91B11 LS75P98B11-A 17 31 47 74 17 31 47 74 17 31 47 74 17 31 47 74 12 23 36.9 2. 5.6 mm LS75P42D11 LS75P51D11 LS75P52D11 LS75P72D11 LS75P91D11 LS735P98D11-A 37 3 74 37 3 74 37 3 74 37 3 74 36 1. 1.9 5.6 mm.5.5.155.12.11.5 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact Tearing withstand of: - operating head 2 dan - ring: 4 dan 69 O 5 L953D 17.5 112.5 51 43.5 36 9 O 18 L954D 45.5...117.5 17.5 45.5 41 34 5.5 L957D 91.5...163.5 42 O 5 L958D 77...3.5 17.5 51 44.5 32.5 9 L959D 1.5...179.5 42 3 L96D L965D Max. 177.5 5.5 17.5 Max. 3.5 36 42 3 L966D 17 5 O 1.2 O 6.3 L967D 181 12.5 O 27 L968D 74 L971D 12 12.5 L972D 35 AC

LS35M.. Limit Switches Metal Casing NEMA-4X - 3 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. 3 Unidirectional Cam Translation Actuator Metal plunger Metal roller plunger ø12.5 plastic roller lever ø12.5 plastic roller lever on steel plunger on steel plunger Conformity / (N.C. contact with positive opening operation) EN 547 (B shape) EN 547 (C shape) EN 547 (E shape) Maximum actuation speed.5 m/s.3 m/s 1 m/s 1 m/s Min. force / torque: - actuation 15 N 12 N 7 N 7 N - positive opening operation 45 N 41 N 24 N 24 N Additional Technical Data Snap action contacts Type LS35M11B11 LS35M12B11 LS35M31B11 LS35M32B11 1.7 2.7 4.3 5.6 mm 3. 4.8 7.7 9.6 mm 4.9 9..5. mm 4.9 9..5 Non-overlapping Type LS35M11D11 LS35M12D11 LS35M31D11 LS35M32D11 Slow action contacts 1.9 3.5 2.8 5.6 mm Weight (packing per unit) kg.18.185.175.175 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 3.4 6.3 5.1 9.6 mm 6. 1.5 8.6. mm 6. 1.5 8.6. mm. mm Dimensions (mm) O 4 12.5 4 55 2 cable inlet O 8 2 12.5 2 25 3 O 11 31 12.5 3.5 39 O 12.5 3 31 2 12.5 5 39 29 O12.5 2 3 12.5 5 3.3 L19D.5 32.5 L1292DG L91D 75 L92D L95D 86 L96D L97D 94 L98D L99D 94 L91D 36 AC

LS35M.. Limit Switches Metal Casing NEMA-4X - 3 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Unidirectional 3 Cam Translation Movement Multidirectional ø plastic roller lever ø18 plastic roller ø5 rubber roller Adjustable ø18 Adjustable ø5 Spring rod on steel plunger lever lever plastic roller lever rubber roller lever lever EN 547 (A shape) 1 m/s 1.5 m/s 1.5 m/s 1.5 m/s 1.5 m/s 1 m/s 7 N.1 N.m.1 N.m.1 N.m.1 N.m.12 N.m 24 N.32 N.m.32 N.m.32 N.m.32 N.m LS35M38B11 LS35M41B11 LS35M42B11 LS35M51B11 LS35M52B11 LS35M91B11 8.8 15. 23.2 32. mm 17 31 47 74 17 31 47 74 17 31 47 74 17 31 47 74 12 23 36 LS35M38D11 LS35M41D11 LS35M42D11 LS35M51D11 LS35M52D11 LS35M91D11 1.6 18.5 15.1 32. mm 37 3 74 37 3 74 37 3 74 37 3 74 36.18.23.255.24.265.18 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 12.5 17...23 29...35 51 O L911D 16 12.5 6 L912D 53 O 18 17.5 L9D 18 45 4 L9D 15 36 5.5 69 O 5 L915D 17.5 124 51 43.5 36 L916D 9 45.5...117.5 O 18 17.5 L919D 1.5...172.5 45.5 41 34 5.5 42 L92D 72.5...1 O 5 17.5 L9D 127.5...186 52 44.5 32.5 L9D 9 5 O 1.2 O 6.3 L931D 19 L932D 37 AC

LS45M.. Limit Switches Metal Casing NEMA-4X - 4 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. Unidirectional 3 Cam Translat. Actuator Stainless steel ø12 stainless steel ø plastic roller lever ø plastic plunger roller plunger on stainless steel plunger roller lever Conformity / (N.C. contact with positive opening operation) EN 541 (B shape) EN 541 (C shape) EN 541 (A shape) Maximum actuation speed.5 m/s.5 m/s 1.5 m/s 1.5 m/s Min. force / torque: - actuation 3 N N 12 N.15 N.m - positive opening operation 45 N 4 N 4 N.3 N.m Additional Technical Data Snap action contacts Type LS45M11B11 LS45MB11 LS45M31B11 LS45M41B11 1.8 3. 4.6 6. mm 3.1 5.3 8.2 1.5 mm 3.1 6.3 1.8 15.5 mm 2 33 49 Non-overlapping Type LS45M11D11 LS45MD11 LS45M31D11 LS45M41D11 Slow action contacts 2.1 3.7 3. 6. mm Weight (packing per unit) kg.24.24.275.28 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 4. 6.9 5.4 1.5 mm 4.5 9. 6.1 15.5 mm 38 33 78 78 Dimensions (mm) 5.3 6.5 16 5 76.5 O 7.3 O 5.3 6 cable inlet O 1 37 16 2 44 3 O 12 5 16 1 5 57.5 2 32 3 O 64 16 6 O 63 61.5 56 41 6 1 17 12 34 4 3 6 3 4 L4D 15 31 43 L1293DG L42D L43D L48D L49D L54D L55D L6D L61D 38 AC

LS45M.. Limit Switches Metal Casing NEMA-4X - 4 mm Width 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: 3 Cam Translation Movement Fully Direction Trans. Multidirectional Actuator ø stainless steel Adjustable ø Adjustable ø6 Spring rod roller lever plastic roller lever plastic rod lever Conformity / (N.C. contact with positive opening operation) EN 541 (A shape) EN 541 (D shape) Maximum actuation speed 1.5 m/s 1.5 m/s 1.5 m/s 1 m/s Min. force / torque: - actuation.15 N.m.15 N.m.15 N.m.18 N.m - positive opening operation.3 N.m.3 N.m.3 N.m Additional Technical Data Snap action contacts Type LS45M42B11 LS45M51B11 LS45M72B11 LS45M91B11 2 33 49 78 2 33 49 78 2 33 49 78 9 Non-overlapping Type LS45M42D11 LS45M51D11 LS45M72D11 LS45M91D11 Slow action contacts 38 33 78 Weight (packing per unit) kg.28.29.285.235 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 38 33 78 38 33 78 12 19 32 32 Dimensions (mm) 7 48.5 76.5 O 7.3 O 5.3 5.3 6.5 6 cable inlet 16 5 O 63 61.5 56 41 6 O 68...124 8...194 58 53 45 6 Maxi 28 Maxi O 6 6 195 O 1.3 O 7 2 16 3 4 1 L4D 15 31 43 L1293DG L6D 3 6 L61D L66D 6 L67D L76D L77D L8D L81D 39 AC

LS75M.. Limit Switches Metal Casing NEMA-4X - 6 mm Width 3 Cable Inlets for Cable Gland, 1/2" NPT Movement to be detected: On end 3 Cam Translat. Unidirectional 3 Cam Translation Actuator Metal plunger ø11 metal roller ø12.5 plastic roller lever ø plastic roller lever plunger on steel plunger on steel plunger Conformity / (N.C. contact with positive opening operation) Maximum actuation speed.5 m/s.3 m/s 1 m/s 1 m/s Min. force / torque: - actuation 15 N 12 N 7 N 7 N - positive opening operation 45 N 41 N 24 N 24 N Additional Technical Data Snap action contacts Type LS75M11B11 LS75M12B11 LS75M31B11 LS75M38B11 1.7 2.7 4.3 5.6 mm 3. 4.8 7.7 9.6 mm 4.9 9..5. mm 8.8 15. 23.2 Non-overlapping Type LS75M11D11 LS75M12D11 LS75M31D11 LS75M38D11 Slow action contacts 1.9 3.5 2.8 5.6 mm Weight (packing per unit) kg.27.28.265.27 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 3.4 6.3 5.1 9.6 mm 6. 1.5 8.6. mm 1.6 18.5 15.1 32. mm 32. mm Dimensions (mm) 12.5 2 O 5.2 2 4 42 52 59 54.5 L1D cable inlet 36 L1294DG O 8 2 L973D 74.5 12.5 L974D 2 25 3 O 11 31 L975D 12.5 3.5 88.5 L976D 39 O 12.5 3 31 2 L977D 93.5 12.5 5 L978D 17...23 29...35 51 O L981D 15.5 12.5 6 L982D 4 AC

LS75M.. Limit Switches Metal Casing NEMA-4X - 6 mm Width 3 Cable Inlets for Cable Gland, 1/2" NPT Movement to be detected: 3 Cam Translat. Fully directional Trans. Multidirectional Pull action Actuator ø18 plastic roller Adjustable ø3 stainless Spring rod Pull action with bent lever steel rod lever with ring Conformity / (N.C. contact with positive opening operation) Maximum actuation speed 1.5 m/s 1.5 m/s 1 m/s.5 m/s Min. force / torque: - actuation.1 N.m.1 N.m.12 N.m 3 N - positive opening operation.32 N.m.32 N.m Additional Technical Data Snap action contacts Type LS75M45B11 LS75M71B11 LS75M91B11 LS75M98B11-A 17 31 47 74 17 31 47 74 12 23 36.9 2. Non-overlapping Type LS75M45D11 LS75M71D11 LS75M91D11 LS75M98D11-A Slow action contacts 37 3 74 Weight (packing per unit) kg.335.38.315.35 Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact 37 3 74 36 1. 1.9 5.6 mm 5.6 mm Dimensions (mm) Tearing withstand of: - operating head: 2 dan - ring: 4 dan 12.5 12.5 5.5 36 O 5.2 2 4 42 52 59 2 54.5 L1D cable inlet 36 L1294DG 61 O 18 17.5 L987D 115.5 48.8 15.5 5.5 36 L988D Max. 177.5 O 3 L997D 17.5 Max. 232 42 17 L998D 5 O 1.2 O 6.3 LD 189.5 LD 74 O 27 L17D 128.5 12.5 L18D 41 AC

Safety Limit Switches with Small Latch (Key) Double Insulation - Plastic Casing NEMA-1-3 and 4 mm Width Metal Casing NEMA-4X - 3 and 4 mm Width Applications Easy to use, the limit switches with small latch (key) offer specific qualities: Visible operation. Capability for strong current switching (conventional thermal current 1 A). Opening guaranteed of the "N.C." contact(s) when the small latch is withdrawn from the limit switch. Contact blocks with dependent action and positive opening operation of the "N.C." normally closed contact(s) (symbol ). Electrically separated contacts. Precision on operation positions (consistency). Immunity to electromagnetic disturbances. These specific features make the limit switches ideal for monitoring and protection of industrial machines without inertia in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). They contribute to protection of operators working on dangerous machines, by opening the control circuit. Withdrawal of the small latch (key) by opening the mobile protector causes immediate stopping of the machine drive. Associated with other standard limit switches and safety switching devices, they produce automatic control circuits meeting standard EN 954-1. They comply with the requirements of European Directives (Low Voltage, Machines and Electromagnetic Compatibility) and are conform to European an international standards. Description LS35P..-S (3 mm width) and LS45P..-S (4 mm width) safety limit switches with key, which are made of fibre-glass reinforced UL-V thermoplastic material, offer double insulation and a degree of protection NEMA-1. LS35M..-S (3 mm width) safety limit switches with key, which are made of zinc alloy (zamak), have a degree of protection NEMA-4X. LS45M..-S (4 mm width) safety limit switches with key, which are made of aluminium alloy, have a degree of protection NEMA-4X. 2 operating head options: Adjustable every 9 assembled using 4 x ø 3 screws (L35P), 4 x ø 4 screws (L45P), 4 x M3 screws (L35M) and 4 x M4 screws (L45M) Pivoting from to 36 with 1 x M3 screw (LS35P81 or LS35M81 only) Casing: 3 mm width with standardized dimensions according to EN 547 4 mm width with standardized dimensions according to EN 541 Block of 2 or 3 contacts Contact configuration: 1 N.O. + 1 N.C., 2 N.C., 1 N.O. + 2 N.C. or 3 N.C. (LS4..P/M only) Positive opening operation Snap action (only for blocks of 2 contacts) Slow action The contacts are electricaly separated 7 small latch (key) options (for LS35P or LS35M) and 5 small latch (key) options (for LS45P or LS45M) to be ordered separately: Right angle key ( or mm fixing) Straight key ( or mm fixing) Straight key or right angle key with shock absorber Adjustable right angle key Mounting the casing: 2 x M4 screws in top part for 3 mm width 2 or 4 x M5 screws for 4 mm width Cover Closed using 1 x ø 3 screw for LS35P..-S Closed using 3 x M3 screws for LS35M..-S Self clipping for LS45P..-S Closed using 2 x M4 screws for LS45M..-S One piece sealing gasket to ensure tightness Connecting terminals M3.5 (+,-) posidriv 2 screw (Screw head with captive cable clamp) Marking conform to IEC 6947-1, IEC 6947-5-1, EN 55 and EN 5 standards Terminal for protective conductor placed near the cable inlet and marked: (LS35M & LS45M only) M3.5 (+, ) pozidriv 2 screw (Screw head with captive cable clamp) L49D Electrical connection: 1 (LS35P) cable inlet by 1/2" NPT plastic adaptor 1 (LS35M & LS45P/M) cable inlet for 1/2" NPT cable gland Suitable for conduit connection only with use of adaptor sleeve optionally provided by manufacturer (on request) Type Example : L S 3 5 P 8 D 1 1 S L S P S Limit Switch...LS Casing width: 3 mm...3 1 cable inlet by 1/2" NPT plastic adaptor (LS35P) or 1/2" NPT for cable gland (LS35M)...5 Casing width: 4 mm...4 1 cable inlet for 1/2" NPT cable gland...5 Plastic casing... P Metal casing...m S...Safety device Contact types: 11... 1 N.O. + 1 N.C. contacts 12... 1 N.O. + 2 N.C. contacts (LS45P.. or LS45M.. only) 2... 2 N.C. contacts 3... 3 N.C. contacts (LS45P.. or LS45M.. only) Snap action: B... Snap (for 1 N.O. + 1 N.C. and 2 N.C. contacts only) Dependent (slow) action: L...Slow / Simultaneous D... Non-overlapping late make C... Overlapping early make (for 1 N.O. + 1 N.C. contacts only) Operating heads: (see panorama) 8...Adjustable every 9 81...Continuously pivoting from to 36 (LS35P & LS35M only) 42 AC

Safety Limit Switches with Axis or Lever Double Insulation - Plastic Casing NEMA-1-3 mm Width Metal Casing NEMA-4X - 3 mm Width Applications Easy to use, the limit switches with rotative axis or lever offer specific qualities: Visible operation. Capability for strong current switching (conventional thermal current 1 A). Opening of the "N.C." contact(s) for a very small rotation angle: 7. Contact blocks with dependent action and positive opening operation of the "N.C." normally closed contact(s) (symbol ). Electrically separated contacts. Precision on operating positions (consistency). Immunity to electromagnetic disturbances. These specific features make the limit switches ideal for monitoring and protection of light industrial machines without inertia equipped with angular movement protectors (doors, hinged grids, rotative covers or cases, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. These switches are suitable for conformity of the existing installed machine base, as they can be mounted on protection devices already installed. Associated with other standard limit switches and safety switching devices, they produce automatic control circuits meeting standard EN 954-1. They comply with the requirements of European Directives (Low Voltage, Machines and Electromagnetic Compatibility) and are conform to European and international standards. Description LS35P75..-S to LS35P77..-S safety limit switches, which made of fibre-glass reinforced UL-V thermoplastic material, offer double insulation and a degree of protection NEMA-1. LS35M75..-S to LS35M77..-S safety limit switches, which made of zinc alloy (zamack), have a degree of protection NEMA-4X. Casing fixing (Plastic or Metal) 2 x M4 screws in the top part Casing (Plastic or Metal) 3 mm wide with standardised dimensions corresponding to EN 547 3 operating head options: Galvanised steel rotative axis Stainless steel rotative axis Galvanised steel flush mounting right angle lever Assembly by 4 x ø 3 screws for LS35P..-S Assembly by 4 x M3 screws for LS35M..-S Block of 2 contacts Contact configuration: 1 N.O. + 1 N.C. or 2 N.C. Positive opening operation Slow action or snap action The 2 contacts are electrically separated Cover Closed using 1 x ø 3 screw for LS35P..-S Closed using 3 x M3 screws for LS35M..-S One piece sealing gasket to ensure tightness. Connecting terminals M3.5 (+,-) posidriv 2 screw (Screw head with captive cable clamp) Marking conform to IEC 6947-1, IEC 6947-5-1, EN 55 and EN 5 standards Terminal for protective conductor placed near the cable inlet and marked: (LS35M only) M3.5 (+, ) pozidriv 2 screw (Screw head with captive cable clamp) L491D Electrical connection: 1 (LS35P) cable inlet by 1/2" NPT plastic adaptor 1 (LS35M) cable inlet for 1/2" NPT cable gland Suitable for conduit connection only with use of adaptor sleeve optionally provided by manufacturer (on request) Type Example : L S 3 5 P 7 5 D 1 1 S L S P S Limit Switch...LS S...Safety device Casing width: 3 mm...3 1 cable inlet by 1/2" NPT plastic adaptor (LS35P) or 1/2" NPT for cable gland (LS35M)...5 Contact types: 11... 1 N.O. + 1 N.C. contacts 2... 2 N.C. contacts Plastic casing... P Metal casing...m Operating heads: (see panorama) Galvanised steel rotative axis... 75 Stainless steel rotative axis... 76 Galvanised steel flush mounting right angle lever... 77 Snap action: B... Snap Dependent (slow) action: L...Slow / Simultaneous D... Non-overlapping late make C... Overlapping early make 43 AC

Safety Limit Switches with Pulling Cable Double Insulation - Plastic Casing NEMA-1-3 mm Width Metal Casing NEMA-4X - 3, 4 and 6 mm Width Applications Easy to use, the safety limit switches with pulling cable for emergency stop with latching and manual rest offer specific qualities: Visible operation. Capability for strong current switching (conventional thermal current 1 A) Contact blocks with dependent action and positive opening operation of the "N.C." normally closed contact(s) (symbol ) Electrically separated contacts. Precision on operation positions (consistency). Immunity to electromagnetic disturbances. These specific features make the limit switches ideal for monitoring and protection in the technical premises (testing-station, painting lines,...) and on the industrial machines (presses, conveyor belts, transfer machines,...) being able to present risks or dangerous phenomena under operation. In any point of his working area, the operator must be able to easily actuate (to pull) the cable to order the stop of the machine or the work in progress. Associated with safety switching devices, they produce automatic control circuits meeting standard EN 954-1. They comply with the requirements of European Directives (Low Voltage, Machines and Electromagnetic Compatibility) and are conform to European an international standards. Description Safety limit switches with pulling cable for emergency stop with Latching and manual reset : LS35P..-SCR (3 mm width), which are made of fibre-glass reinforced UL-V thermoplastic material, offer double insulation protection NEMA-1. LS35M..-SCR (3 mm width), which are made of zinc alloy (zamak), have a degree of protection NEMA-4X. and a degree of LS45M..-SCR (4 mm width) and LS65M..-SCR (6 mm width), which are made of aluminium alloy, have a degree of protection NEMA-4X. Blue manual reset button Casing: 3 mm width with standardized dimensions according to EN 547 4 mm width with standardized dimensions according to EN 541 6 mm width Block of 2 or 3 contacts Contact configuration: 1 N.O. + 1 N.C., 2 N.C., 1 N.O. + 2 N.C. or 3 N.C. (LS45M..-SCR & LS65M..-SCR only) Positive opening operation Snap action (only for blocks of 2 contacts) Slow action The contacts are electrically separated Connecting terminals M3.5 (+,-) posidriv 2 screw (Screw head with captive cable clamp) Marking conform to IEC 6947-1, IEC 6947-5-1, EN 55 and EN 5 standards Terminal for protective conductor placed near the cable inlet and marked: (LS35M..-SCR, LS45M..-SCR & LS65M..-SCR only) M3.5 (+, ) pozidriv 2 screws (Screw head with captive cable clamp) Operating head: Assembling using 4 x M3 screws for LS35M Assembling using 4 x ø 3 screws for LS35P Assembling using 4 x M4 screws for 4 & 6 mm width Mounting the casing: 2 x M4 screws in top part for 3 mm width 2 or 4 x M5 screws for 4 mm width 2 x M5 screws in top part for 6 mm width Cover Closed using 1 x ø 3 screw for LS35P..-SCR Closed using 3 x M3 screws for LS35M..-SCR Closed using 2 x M4 screws for LS45M..-SCR Closed using 4 x M4 screws for LS65M..-SCR One piece sealing gasket to ensure tightness Electrical connection: 1 (LS35P) cable inlet by 1/2" NPT plastic adaptor * (LS35M, LS45M & LS65M) cable inlet for 1/2" NPT cable gland * 1 cable inlet (LS35P/M & LS45M) & 3 cable inlets (LS65M) Suitable for conduit connection only with use of adaptor sleeve optionally provided by manufacturer (on request) Type Example : L S 3 5 P 9 8 D 1 1 SCR L S P SCR Limit Switch...LS SCR... Safety device with ring Casing width: 3 mm...3 1 cable inlet by 1/2" NPT plastic adaptor (LS35P) or 1/2" NPT for cable gland (LS35M)...5 Contact types: 11... 1 N.O. + 1 N.C. contacts 12... 1 N.O. + 2 N.C. contacts (LS45M.. or LS65M.. only) 2... 2 N.C. contacts 3... 3 N.C. contacts (LS45M.. or LS65M.. only) Casing width: 4 mm...4 Casing width: 6 mm...6 1 cable inlet (LS45M) or 3 x cable inlets (LS65M) for 1/2" NPT cable gland...5 Snap action: B... Snap (for 1 N.O. + 1 N.C. and 2 N.C. contacts only) Dependent (slow) action: L...Slow / Simultaneous D... Non-overlapping late make C... Overlapping early make (for 1 N.O. + 1 N.C. contacts only) Plastic casing... P Metal casing...m Operating heads: 98...with ring and blue manual reset 44 AC

Safety Limit Switches with Small Latch (Key) Metal Casing NEMA-4X - 3 and 4 mm Width Plastic Casing NEMA-1-3 and 4 mm Width LS35P: 1 cable inlet by 1/2" NPT plastic adaptor LS35M: 1 cable inlet for 1/2" NPT cable gland Plastic Casing - NEMA-1-3 mm Width Metal Casing - NEMA-4X - 3 mm Width SB8119CM LS35P8D11-S 1SBC5 923 2F3M LS35M8D11-S Ordering Details - Product without Small Latch (Key) Contact blocks Catalog number List price 11 12 D11 L2 Plastic Limit Switches with Adjustable Head Every 9 1 - LS35P8D11-S - 1 LS35P8L2-S Metal Limit Switches with Adjustable Head Every 9 1 - LS35M8D11-S - 1 LS35M8L2-S LS45M: 1 cable inlet for 1/2" NPT cable gland Ordering Details - Product without Small Latch (Key) Contact blocks Catalog number List price 31 11 31 LS45P8D12-S LS45M8D12-S 1SBC5 9153 2F3M 1SBC5 9232 2F3M 18 D12 32 12 L3 32 Plastic Limit Switches with Adjustable Head Every 9 1 - LS45P8D12-S - 1 LS45P8L3-S Metal Limit Switches with Adjustable Head Every 9 1 - LS45M8D12-S - 1 LS45M8L3-S Ordering Details - Small Latch (Key) Description of key Fixing Catalog number List price mm Small Latch (Keys) for LS3..P.. or LS3..M.. Right angle key LSA3P5 Straight key LSA3P6 Right angle key with shock absorber 15 LSA3P7 Straight key with shock absorber 15 LSA3P8 Adjustable angle key 4 LSA3P9 Small Latch (Keys) for LS4..P.. or LS4..M.. Right angle key LSA4X5 Straight key LSA4X6 Right angle key with shock absorber 15 LSA4X7 Straight key with shock absorber 15 LSA4X8 Adjustable angle key 4 LSA4X9 LSA3P8 45 AC

Safety Limit Switches with Axis or Lever Double Insulation - Plastic Casing NEMA-1-3 mm Width Metal Casing NEMA-4X - 3 mm Width LS35P: 1 cable inlet by 1/2" NPT plastic adaptor LS35M: 1 cable inlet for 1/2" NPT cable gland Plastic Casing - NEMA-1-3 mm Width Metal Casing - NEMA-4X - 3 mm Width Ordering Details Contact blocks Catalog number List price 11 SB8126CM D11 12 L2 LS35P75D11-S Plastic Limit Switches with Rotative Axis (zinc plated) 1 - LS35P75D11-S - 1 LS35P75L2-S Plastic Limit Switches with Stainless Steel Rotative Axis 1 - LS35P76D11-S - 1 LS35P76L2-S 1SBC5 9251 1F3M LS35M76D11-S Metal Limit Switches with Rotative Axis (zinc plated) 1 - LS35M75D11-S - 1 LS35M75L2-S Metal Limit Switches with Stainless Steel Rotative Axis 1 - LS35M76D11-S - 1 LS35M76L2-S Plastic Limit Switches with Lever (zinc plated) 1 - LS35P77D11-S - 1 LS35P77L2-S Metal Limit Switches with Lever (zinc plated) 1 - LS35M77D11-S - 1 LS35M77L2-S SB8115CM LS35P77D11-S 46 AC

Safety Limit Switches with Pulling Cable Double Insulation - Plastic Casing NEMA-1-3 mm Width Metal Casing NEMA-4X - 3, 4 and 6 mm Width LS35P: 1 cable inlet by 1/2" NPT plastic adaptor LS35M: 1 cable inlet for 1/2" NPT cable gland Plastic Casing - NEMA-1-3 mm Width Metal Casing - NEMA-4X - 3 mm Width 1SBC 1 3F LS35M98D11-SCR Contact blocks Catalog number List price D11 11 12 L2 Plastic Safety Limit Switches with Pulling Cable for Emergency Stop with Latching and Manual Reset 1 - LS35P98D11-SCR - 1 LS35P98L2-SCR Metal Safety Limit Switches with Pulling Cable for Emergency Stop with Latching and Manual Reset 1 - LS35M98D11-SCR - 1 LS35M98L2-SCR 1SBC 1 4F LS45M: 1 cable inlet for 1/2" NPT cable gland Metal Casing - NEMA-4X - 4 mm Width LS65M: 3 cable inlet for 1/2" NPT cable gland Metal Casing - NEMA-4X - 6 mm Width Contact blocks Catalog number List price 31 11 31 LS45M98D11-SCR D12 32 12 L3 32 Metal Safety Limit Switches with Pulling Cable for Emergency Stop with Latching and Manual Reset 1 - LS45M98D12-SCR - 1 LS45M98L3-SCR LS65M98D12-SCR 1SBC 1 5F Metal Safety Limit Switches with Pulling Cable for Emergency Stop with Latching and Manual Reset 1 - LS65M98D12-SCR - 1 LS65M98L3-SCR Accessories Description of accessories Catalog number List price LSR5242 LSR5343 LSR5444 Cable grip D5 LSR5242 Cable end protector D5 LSR5343 Cable support M8 x 59 LSR5444 Turnbuckle M6 LSR51 End spring (LS3...P, LS3...M) LSR5845 End spring (LS4...M, LS6...M) LSR5846 D5 red cable: length 1.5 meters LSR5547 15.5 meters LSR5548 25.5 meters LSR5549 51. meters LSR555 12. meters LSR5551 LSR5551 47 AC

Safety Limit Switches Travel and Operating s P O CP F1 P A C1 CL C Key extraction P P C2 L L539D C C C C C L537D L544D C: travel in millimetres C: travel in degrees C: travel in degrees Diagram for non-overlapping slow action contacts: P O Free position: position of the switch actuator when no external force is exerted on it. P A Operating position: position of the switch actuator, under the effect of force F1, when the contacts leave their initial free position. P P Positive opening position: position of the switch actuator from which positive opening is ensured. L Max. travel position: maximum acceptable travel position of the switch actuator under the effect of a force F1. C 1 Pre-travel (average travel): distance between the free position P O and the operating position P A. C P Positive opening travel: minimum travel of the switch actuator, from the free position, to ensure positive opening operation of the normally closed contact (N.C.). C 2 Over-travel (average travel): distance between the operating position P A and the max. travel position L. C L Max. travel (maximum travel): distance between the free position P O and the max. travel position L. CL CP PP C1-1 Key extraction Key insertion C1-2 C: travel C C Note: C 1-1 = pre-travel of contact, C 1-2 = pre-travel of contact. Examples: LS35P8L2-S Simultaneous slow action contacts LS35P76D11-S non-overlapping slow action contacts C C Diagram for non-overlapping slow action contacts: CL L538D C C1-2 PP CP C1-1 C: travel Actuation and Release Diagram in millimetres / key travel 3.5 5..5 mm Diagram in degrees / lever rotation 9 31 6 6 31 9 15 15 Contacts position Contact closed Contact open Contacts identification (example) 48 AC

Safety Limit Switches with Pulling Cable for Emergency Stop with Latching and Manual Reset Travel and Operating s and Installation P R F STOP C C L C es If cable rupture Contacts position Contact closed Contact open Contacts identification (example) Starting position (green mark) Cable in traction C L C es C p P P R F 1 STOP L mm mm L2D Po Free position: position of the switch actuator (ring plunger) when no external force exerted on it. Pp Positive opening position: position of switch actuator (ring plunger) from which positive opening is ensured. Starting position (green mark): the safety system is on by pulling the blue reset button. L Max. travel position: maximum acceptable travel position of the switch actuator (ring plunger). C Minimum travel for arming the safety system and to obtain the starting position under the effect of a force F. Cp Positive opening travel: minimum travel of the switch actuator (ring plunger), from the starting position, to ensure the positive opening operation of the normally closed contact (N.C.). Ces, Ces Emergency Stop and Latching travel: minimum travel to obtain the emergency stop and the mechanical latching of the safety system under the effect of a force F1. CL Max. travel (maximum travel): distance between the starting position and the max. travel position L. CL Distance between the starting position and the free position Po if the cable breaks. Installation To obtain the right operation of the apparatus, please follow carefully below instructions: 1. If necessary, according the Limit Switch position turn the head by unscrewing the 4 fixing screws in oder that the blue reset button become accessible. When the head is well place, re-screw the 4 screws with a tightening torque of.8 Nm. 2. In order to have the cable correctly guided, fix tightly the apparatus and the cable support on rigid elements. Insert on the side of the Limit Switch a turnbuckle, and in the other side of the cable an extremity spring. Put the cable in tension by using the turnbuckle till the green mark appear on the metal plunger at the extremity of the red head (fig. 1). 3. Pull the blue reset button to arm the safety system and close the safety contacts. 4. The inside contacts of the Limit Switch will always change of position each time the cable will be operated (by pulling) as shown on the above. 5. Check that the apparatus operate correctly before to switch on the machine by following the below test procedure : a) pull slowly the cable, the blue reset button doesn t change of position but the N.C. contact open and operate the "normal" stop of the machine. b) Pull the cable with an F1 force, the blue reset button change of position and operate the emergency stop of the machine with latching of the safety system. c) In order to switch on again the device, please come back to point n 2 and repeat the operation (if necessary). 6. The use of those apparatus involve the respect of following standard: EN 188, EN 292, EN 954-1 LS35M98..-SCR and LS35P98-SCR series: L = 6 m maximum LS45M98..-SCR and LS65M98-SCR series: L = 16 m maximum L (fig. 1) Turnbuckle End spring LS35M98..-SCR and LS35P98-SCR series: L = 15 m maximum LS45M98..-SCR and LS65M98-SCR series: L = 25 m maximum L G = 3 m maximum G = 3 5 m maximum L8D G G G G G 49 AC

General Technical Data Safety Limit Switches Plastic Casing NEMA-1 and Metal Casing NEMA-4X Technical Data Plastic Casing Metal Casing Standards IEC 6947-1, IEC 6947-5-1, EN 6947-1, EN 6947-5-1, UL 58,and CSA C-2 No. Certifications - Approvals UL - CSA - CCC Air temperature near the device during operation C -25... +7 for storage C -3... +8 Climatic withstand According to IEC 68-2-3 and salty mist according to IEC 68-2-11 Mounting positions All positions are authorised Shock withstand (according to IEC 68-2-27 and EN 668-2-27) g Limit switch with small latch (key): 1 g (1/2 sinusoidal shock for 11 ms) no change in contact position Limit switch with rotative axis or lever and Limit switch with pulling cable: 4 g Resistance to vibrations (acc. to IEC 68-2-6 and EN 668-2-6) g 5 g (1... 5 Hz) no change in position of contacts > 1 µs Protection against electrical shocks (acc. to IEC 536) Class II Class I Degree of protection (according to IEC 529 and NEMA) IP65, NEMA 1 IP66, NEMA 4-4X Electrical Data Rated insulation voltage U i according to IEC 6947-1 and EN 6947-1 V 5 (degree of pollution 3) 5 (LS45M..), (LS65M..), 4 (LS35M..) - (degree of pollution 3) according to UL 58, CSA C-2 No. 6 6 (LS45M..), (LS65M..), 3 (LS35M..) Rated impulse withstand voltage U imp kv 6 (according to IEC 6947-1 and EN 6947-1) Conventional enclosed thermal current I the A 1 (according to IEC 6947-5-1 and EN 6947-5-1) (θ < 4 C) Short-circuit protection - fuses A 1 Rated operational current I e / AC-15 acc. to IEC 6947-5-1 24 V - 5/6 Hz A 1 V - 5/6 Hz A 5.5 23 V - 5/6 Hz A 3.1 24 V - 5/6 Hz A 3 4 V - 5/6 Hz A 1.8 according to UL 58, CSA C No. A 6 A 6 (LS45M), (LS65M) - A 3 (LS35M) I e / DC- acc. to IEC 6947-5-1 24 V - d.c. A 2.8 11 V - d.c. A.6 25 V - d.c. A.27 according to UL 58, CSA C No. Q 6 Q 6 (LS45M), (LS65M) - Q 3 (LS35M) Positivity Contacts with positive opening operation as per IEC 6947-5-1 chapter 3 and EN 6947-5-1 Resistance between contacts mω 25 Mechanical durability Millions of operations > 1 million Max. switching frequency Cycles/h 6 Electrical durability (according to IEC 6947-5-1 appendix C) Utilization categories AC-15 and DC- (see curves and values below) Max. switching frequency Cycles/h 36 Load factor.5 Connecting data of contact blocks Connecting terminals M3.5 (+, ) pozidriv 2 screw with cable clamp Connecting capacity 1 or 2 x mm 2 / AWG.5 mm 2 / AWG 2 to 2.5 mm 2 / AWG Terminal marking According to EN 5 Electrical durability for AC-15 utilization category Electrical durability for DC- utilization category Snap action Slow action Snap action Slow action 5 5 Power breaking for a durability of 5 million operating cycles 3 3 2 2 Voltage 24 V 9.5 W 12 W Voltage 48 V 6.8 W W 1 1 Voltage 11 V 3.6 W 6 W Millions of operating cycles.5.3.2 23-24 4.1.2.3.5 48 12-24 L351DG 1 2 3 5 1 Current (A) Millions of operating cycles.5.3.2.1 23 1 2 3 5 1 Current (A) 48 12-24 L35DG 5 AC

LS35P8..-S and LS35M8..-S Limit Switches with Small Latch (Key) and Adjustable Head 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: Small Latch (Key), Front or Vertical Translation Casing 3 mm width Plastic: Degree of protection NEMA-1 Metal: Degree of protection NEMA-4X Actuator Key Key Conformity / (N.C. contact with positive opening operation) Actuation speed: maximal / minimal.5 /.1 m/s.5 /.1 m/s Min. force / torque: - for insertion of the key 15 N 15 N - for extraction of the key 15 N 15 N - positive opening operation 3 N 3 N Additional Technical Data (Operating s with keys inserted) Snap action contacts Type LS35P8D11-S LS35M8D11-S slow action contacts 3.8 5.3 4.8.5 mm 2. 3.5 3..5 mm 3.8 5.3 4.8.5 mm 2. 3.5 3. Simultaneous Type LS35P8L2-S LS35M8L2-S Slow action contacts 11 12 3.5 5. Weight (packing per unit) kg.8.18.5 mm 1.8 3.3.5 mm 3.5 5..5 mm 1.8 3.3.5 mm.5 mm Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact Dimensions (mm) 4 3 9.4 ø4.4 11 23 1.6 2 24.1 12.45 6.6 24.1 12.45 6.6 8x24 12 L373D 3 L374D 3 37 7 3 37 7 19.2 R 4 mini. R 4 mini. 4 4 3 L377D L43D 9 53 ø 4 2 3.3 L359D cable inlet 3 L36D2G 92 55 ø 4 2 3.3 L1259D cable inlet 32.5 L126D1G 51 AC

LS45P8..-S and LS45M8..-S Limit Switches with Small Latch (Key) and Adjustable Head 1 Cable Inlet for Cable Gland, 1/2" NPT Movement to be detected: Small Latch (Key), Front or Vertical Translation Casing 4 mm width Plastic: Degree of protection NEMA-1 Metal: Degree of protection NEMA-4X Actuator Key Key Conformity / (N.C. contact with positive opening operation) Actuation speed: maximal / minimal.5 /.1 m/s.5 /.1 m/s Min. force / torque: - for insertion of the key 3 N 3 N - for extraction of the key 3 N 3 N - positive opening operation 45 N 45 N Additional Technical Data (Operating s with keys inserted) Non-overlapping Type LS45P8D12-S LS45M8D12-S slow action contacts 31 32 23-24 31-32 5.5 7 AP AP 6.7 26.6 mm Simultaneous Type LS45P8L3-S LS45M8L3-S Slow action contacts 11 12 31 32 31-32 5.3 6.8 Weight (packing per unit) kg.155. 26.6 mm 23-24 31-32 31-32 4.3 5.8 4.1 AP AP 5.5 5.6 26.6 mm 26.6 mm 23-24 31-32 31-32 5.5 7 5.3 AP AP 6.7 6.8 26.6 mm 26.6 mm 23-24 31-32 31-32 4.3 5.8 4.1 AP AP 5.5 5.6 26.6 mm 26.6 mm Special heads, accessories and special contact arrangement or particular function: please consult us. Closed contact / Open contact Dimensions (mm) 4 3 9.4 ø4.4 11 28 1.6 3 15.5 6.6 3 16 6.6 2 1 1 8x24 12 L373D 41 L374D1 32.5 42.5 33 43.2 R 4 mini. R 4 mini. 19.5 67 7.5 ø 5.5 3 cable inlet 1 7 7.3 ø 5.3 3 cable inlet 32.5 L377D1 L43D ø 5.5 7 41.3 L1261D 41 L1262D1G ø 5.3 1 4 L1263D 43.3 L1264D1G 52 AC