HEIA S SINE 1992 GENERA AAOGE 2017
AGDRIVE ENRIFGA S SEAESS AG DRIVE ENRIFGA S In sealless magnetic drive centrifugal pumps, the external magnet is directly connected to the motor shaft and it transmits the torque to the internal magnet. he magnetic field created produces a rotation without physical contact between the parts so the impeller spins and moves the fluid. he rear casing is placed between the two magnet joints and it hermetically closes the hydraulic part from the motor. 1 Head up to 48 mlc. Pump head machined from a block. H SS 316 etallic pumps made in stainless steel AISI316. apacity up to 32 m3/h. Head up to: 24 mlc. 2 6 8 Gemmeotti can supply three different models of mag drive centrifugal pumps: H PP/PVDF hermoplastic pumps made in PP or PVDF. apacity up to 45 m3/h. Head up to 33 mlc. Injection molded parts. 11 H hermoplastic pumps made in PP or PVDF. apacity up to 130 m3/h. 3 4 5 7 AERIAS IN ONA WIH HE IID ENRIFGA S PAR NBER DESRIPION H PP/PVDF H H SS 316 1 HEAD PP OR PVDF PP OR PVDF AISI 316 2 ORING EPD OR VION EPD OR VION EPD OR VION 3 ASING HRS BSH ERAI AI 2 + EPD OR VION ERAI AI 2 + EPD OR VION PFE 4 SHAF ERAI AI 2 99,7% ERAI AI 2 99,7% HASEOY 276 5 BEARINGS PFE PFE PFE 6 IPEER PP OR PVDF PP OR PVDF AISI 316 7 INERNA AGNE PP OR PVDF + NdFeB PP OR PVDF + NdFeB AISI 316 + Smo 8 REAR ASING PP OR PVDF PP OR PVDF AISI 316 www.gemmecotti.com
12 H PP/PVDF HEROPASI AGDRIVE ENRIFGA S SANDARD: Gas threaded In and Out connections. Direct starting motor. OPIONA: Flanges available. Dryrunning protection. Baseplate. Silicon carbide sleeve bearing. H pumps are available also for NEA motors and with NP connections. AIN FEARES ag drive centrifugal pumps series H PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. hanks to the innovative mag drive system, pumps model H PP/PVDF reduce the risks of leakage and emissions and the maintenance costs. he transmission of the motion occurs through magnetic joints without any mechanical seal and this design guarantees the maximum safety and efficiency. he pumped liquid has to be clean and without solids in suspension. aterials available: PP / PVDF. aterials in contact with the liquid; casing and impeller: PP/PVDF; oring: EPD (standard for PP pumps); VION (standard for PVDF pumps); static shaft: Al2O3 99,7 %; Bushing PFE. ax flow: 45 m3/h; ax head 33 mlc. emperature: PP: max 70 PVDF: max 90. ax viscosity: 200 cst. Pressure rating: NP 6 at 20. High torque magnetic coupling NdFeB standard. Suitable for high corrosive liquids. PERFORANE RVES 50HZ 2900 RP 36 32 28 24 H 50 H (m) 20 16 H 40 12 H 31 H 15 8 H 10 4 H 6 H 4 0 0 4 8 12 16 20 24 28 32 36 40 44 48 (mc/h)
1. AGDRIVE ENRIFGA S H PP/PVDF EHNIA DAA SIZE AERIA AX H AX SION DISHARGE WEIGH (KG) 50HZ (3/H) 60HZ (SGP) 50HZ () 60HZ (F) ONNEION ONNEION PP PVDF SIABE POWER (KW) 2900 rpm / FANGE AND FRAE H 4 PP PVDF 3,5 16 7 33 FE 1/2 0.9 1 0,12 / 56 B B3/B5 H 6 PP PVDF 6,5 30 8,5 42 FE 3/4 1.6 1.8 0,25 / 63 B B3/B5 H 10 PP PVDF 13 68 14 58 1 1/ FE 2.6 2.9 0,55 / 71 2B B3/B5 1,1 / 80 B B3/B5 H 15 PP PVDF 23 125 20 90 1 1/ 5.8 6.6 1,1 / 80 B B3/B5 1,5 / 90 S B3/B5 H 31 PP PVDF 35 185 24 115 2 1/ 8.0 8.9 2,2 / 90 B3/B5 3 / 100 B3/B5 4 / 112 B3/B5 H 40 PP PVDF 42 215 31 150 2 1/ 19.7 21.3 3 / 100 B3/B5 4 / 112 B3/B5 H 50 PP PVDF 43 220 33 2 1/ 32.2 35 5,5 / 132 S2A B5 7,5 / 132 S2B B5 H 4610 PP/PVDF DIENSIONS H 4610 PP/PVDF S R FANGES DIN PN 10 13 E O Z V DNs P H I Hs G B A N D ' V' R' S' ' FANGE B3 B5 E O KW NOE: DIREION OF FANGES IS ONER DIENSIONS OKWISE mm AS SEEN WHEN FAING HE. S AVAIABE R S HREADED OR FANGED. V Z DNs * Different H according 4 to the manufacturer. ** OPIONA PON REES: Baseplate Flanges H 6 75 105 14 14 85 115 25 20 NOA: ROAZIONE ANIORARIA VISA DA E. H 10 85 115 14 18 110 150 40 25 POPE DISPONIBII ON AAHI FIEAI O FANGIAI. * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange DIENSIONS mm BASEPAE DIENSIONS mm A B D E Hs G H I * N O P R S V 1/ H 4 56 B 0.12 76 115 90 71 56 39 FE 176 34 36 80 120 94 244 280 FANGES DIENSIONS mm 130 H 6 63 B 0.25 84 143 100I 80 63 18 59 6 3/4 FE 191 45 40 98 102 244 R S V 280 130 Z DNs H 10 71 2B 0.55 110 180 1/2 112 90 71 20 70 9 FE 215 45 45 100 H 4 112 244 280 130 1/2 H 10 80B 1.1 122 190 125 100 71 20 70 9 FE 232 45 50 100 200 H 6 75 105 14 14 85 115 25 20 ' * Different according to the manufacturer. ** OPIONA PON REES: Baseplate Flanges. H 10 NOE: DIREION OF IS ONER OKWISE V' AS SEEN WHEN FAING HE. 85 115 14 18 110 150 40 25 S AVAIABE HREADED OR FANGED. PO. DIENSIONS mm BASEPAE DIENSIONS mm
H PP/PVDF H 153 PP/PVDF DIENSIONS H 153 PP/PVDF FANGES DIN PN 10 P S R S R Z V DNs Hd FANGES DIN PN 10 Z V DNs P Hd F G A N D Hs F G B A N D Hs BR' S' ' 14 O E O R' S' NOE: DIREION OF IS ONER OKWISE ' AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED. * Different according NOE: DIREION to the manufacturer. OF IS ONER OKWISE ** OPIONA PON REES: AS SEEN WHEN Baseplate FAING Flanges HE. S AVAIABE HREADED OR FANGED. NOA: ROAZIONE * Different ANIORARIA according VISA to the DA manufacturer. E. POPE DISPONIBII ON AAHI FIEAI O FANGIAI. ** OPIONA PON REES: Baseplate Flanges * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange NOA: ROAZIONE ANIORARIA VISA DA E. POPE DISPONIBII ON AAHI FIEAI O FANGIAI. * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange E I ' V' I ' V' H 31 125 H 15 168110 18 153 18 18 145 125188 168 6550 50 40 BASEPAE DIENSIONS mm H 31 125 168 18 18 145 188 65 50 H 40 145 188 18 R S 18 203 V 80 65 H 40 145 188 18 18 203 80 65 120 302 350 157 205 PO. DIENSIONS mm 132 302 350 BASEPAE 157 205 DIENSIONS mm FANGE kw B3 B5 A B D E F DIENSIONS G Hs mm Hd I * N O P BASEPAE R S DIENSIONS mm V FANGE KW 132 302 350 157 205 B3 B5 A B D E F G Hs Hd I H 15 G 80 B 1,1 150 230 125 100 80 28 52 42 13 * N O P 232 66 50 135 200 1/2 R S V 120 302 350 157 205 352 11/ 400 202 250 H 15 80 B 1,1 150 230 125 100 80 28 52 42 13 232 66 50 135 200 120 302 350 157 205 1/2 H 15 G 90 S 1,5 240 100 90 28 52 42 13 256 66 56 135 200 352 11/ 132 302 350 157 205 H 15 90 S 1,5 240 100 90 28 52 42 13 400 202 250 256 66 56 135 200 132 302 350 157 205 1/2 H 31 G 90 2,2 184 245 125 90 30 61 44 13 1/2 280 66 56 156200 H 31 90 2,2 184 245 125 90 30 61 44 13 352 400 132 202 250 302 350 157 280 66 56 132 302 350 157 205 1/21/2 H 31 H 100 31 G 100 3 203 3 264 203 264 100 100 30 30 61 61 44 44 13 13 315 315 66 66 63 63 250 250 352352 400 400 202 202 250 250 1/2 H 31 112 4 203 264 190 112 30 61 44 13 325 66 70 250 1/2 352 400 202 250 H 40 G 100 3 228 280 100 40 52 50 10 315 82,5 63 170 250 352 400 202 250 1/2 H 40 100 3 228 280 100 40 52 50 10 315 82,5 63 170 250 352 400 202 250 1/2 H 40 G 112 4 228 280 190 112 40 52 50 10 325 82,5 70 170 250 1/2 H 40 112 4 228 280 190 112 40 52 50 10 156 352 400 202 250 325 82,5 70 170 250 156 352 400 202 250 * Different according to the manufacturer. ** OPIONA PON REES: Baseplate Flanges. NOE: DIREION OF IS ONER OKWISE AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED. FANGES DIENSIONS mm R S V Z DNs FANGES DIENSIONS mm H 15 110 153 18 18 125 168 50 40 R S V Z DNs
1. AGDRIVE ENRIFGA S H 50 PP/PVDF H 50 PP/PVDF DIENSIONS 15 FANGES DIENSIONS mm R S V Z DNs H 50 145 188 18 18 203 80 65 FANGE B3 B5 KW DIENSIONS mm A B D E F G H Hs Hd I ~ N O P H 50 132 S2A 5,5 365 300 216 250 192 40 52 274 50 10 H 50 132 S2B 7,5 365 300 216 250 192 40 52 274 50 10 383 82.5 98 170 300 421 82.5 98 170 300 1/2 1/2 OPIONA PON REES: Flanges. NOE: DIREION OF IS ONER OKWISE AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED.
GEEOI SR Via A. Volta 85/A 20816 eriano aghetto B IAY EROPEAN NION Ph: +39 02.96460406 Fax: +39 02.96469114 info@gemmecotti.com www.gemmecotti.com