Downlighting LyteCaster Project: Location: Cat.No: Type: Lamps: Notes: Qty: " round adjustable 800 Lumens Philips Lightolier LyteCaster LED adjustable features a.5" luminaire height that conserves plenum space without compromising the 5 angular tilt. The modular and interchangeable light engine allows for an easy future upgrade. The accent adjustable is damp location listed and comes in standard finish options. Complete product = Frame-in kit + Light engine + Trim Order each separately Ordering guide: Frame-In kit Example: AE1 LyteCaster " Frame type Dimming Input voltage A AirSeal IC, New Construction, Screw E ELV/Triac dimming 1 V AN AirSeal IC, New Construction, Nail N New Construction Non-IC Z 0-V U Universal (-77V) Ordering guide: Light engine Example: 0880NF Lumens 08 CRI CCT Beam Option LyteCaster " 08 800 8 80 7 700K 0 000K 5 500K S Spot, 17 NF Narrow flood, F Flood, 0 9 90 7 700K 0 000K 1 S Spot, 17 NF Narrow flood, F Flood, 0 CW CrispWhite 1 Ordering guide: Round trim Example: RAD Shape R Luminaire type Finish LyteCaster " R Round A Adjustable C Chrome cone blank White D Diffuse cone W White cone AB Adjustable baffle W White baffle blank White 1. 000K and CrispWhite must be ordered together LyteCaster_R_Adjustable Nov016 11/16 page 1 of 6
RA LyteCaster " Round Ordering guide: Accessories Type Beam Finish LyteCaster " AH Accessory holder LS Linear lens spread film SD 5 soft diffusion film W White B Black. Accessory holder required. RP Replacement Optic S Spot NF Narrow flood F Flood Assembled configuration: 1. Frame Galvanized steel construction with internal access door for inspection of junction box.. LED Module Extruded Aluminum clear anodized finish heat sink with thermal interface material efficiently transfers heat away from LED. Includes strain relieved low voltage whip with snap interconnector for quick, tool-less assembly of power connection. Tool-less assembly to trim. Frame. Accessory Film (Optional) Available film accessories:.0 thick Linear spread film has notch to assist with beam orientation Holder required; only one film allowed per installation.. Accessory Holder (Optional) painted steel. Accessory holder snaps onto LED Module. Can be installed before or after trim installation. 5. Mounting springs stainless steel mounting springs min 0.01 thick provide a universal mounting solution between the different frame offerings 6. Downlight Reflector: Aluminum Reflector Cone. 7. Step Baffle: Molded polymeric material. 8. Die Cast Aluminum Trim. Note: LED module allows for field replaceable optics. Order separately. LED Module Accessory film (optional) Mounting springs Accessory holder (optional) Adjustable Baffle Adjustable Baffle LyteCaster_R_Adjustable Nov016 11/16 page of 6 Reflector
RA 1/8" (5mm) Reflector LyteCaster " Round 1/" (115mm) 1/16" (5mm) 1/" (115mm) 1/16" (5mm) AE1 & ANE1 new construction in IC AirSeal frame-in kits 7/16" Bottom view 11 1/" (0mm) 7/16" 1/8" (mm) 7/16" 5/" (mm) 0-5mm) 1" Min. (0mm) " Max. (6mm) (0-5mm) M ceil 5 /8" (16mm) 7 1/" (0mm) 0-1/" 5/" (mm) M ceil Round trim 0-1/" M ceil Light engine 1" Min. ( " Max. (61 0-5mm) 8 1/" (mm) 7/16" 1/8" 5/" (5mm) 11 5/8" (96mm) (0-5mm) M Features 58 Cutoff ceil 1. Housing: # ga. (.06") thick. Junction box: ½" (6mm) Galvanized steel. culus listed x 5 /8" (17mm) x " (51mm) for direct contact with thermal #1 ga. (.0 ) thick galvanized 7 1/" (0mm) insulation (IC rated). AirSeal steel, culus listed 90 degrees housing minimizes air leakage C rated supply conductors. to less than CFM at 1.57PSF Rated for branch circuit (or 75PA), which 1/16" complies wiring supplying connected with Title, the 1/8" (5mm) International (5mm) luminaires (daisy chaining). 1/" (115mm) Energy Conversation Code, and Washington State Energy 19/". (66mm) Mounting bars: #16 ga. (.059") thick galvanized steel. Bars " (9mm) Code (Section 50.). This pivot for easy attachment helps reduces heat loss and and wire in from below the condensation 5/8" (118mm) in ceiling. ceiling line. Bars can extend to Internal access door for 5/" (mm) accommodate 16" (06mm) to inspection of junction box. " (6mm) O.C. joist spacing.. Lower frame and top cover: Bars can accommodate 1" # ga. (06") thick Galvanized (05mm) O.C. joist spacing after (0-5mm) M steel. Accommodates ceilings slight field modification (see ceil up to 1" (5. mm) thick. 7/16" instruction sheet). Features Bottom cover provided with a integral self-tapping screw.5" (6.mm) lip and embossed phillips/square drive for indicator lines to simplify attachment to wood or metal 5/" (mm) alignment during installation. construction. Also available with integral nails (N). Attaches " (mm) 1/" (115mm) 5/" (mm) Housing can be locked into position on the mounting bars with locking screws. 1 7/16" (mm) 5/8" (118mm) LyteCaster_R_Adjustable Nov016 11/165/" page (mm) of 6 to T-bar ceilings without accessories. Bars installed on (0-5mm) shortest dimension of frame M can be easily rotated 90 from ceil original position. 1/" (115mm) 5/" (mm) 5/" 7/16" (0-5mm) M Electrical 1/8" ceil 5. Electronic dimming driver: Input voltage v, Input freq.: 1/" (115mm) Class electronic LED Driver, 50/60 hz, Input current.5 amps, with less than 1 second start 1/" (5mm) Input Power 1 W, Power factor >.9 up, RoHS compliant, suitable for damp locations. v Warranty 50/06Hz >.9 power factor. 5 year limited warranty. Sound rating Class A (<db). 1/16" (5mm) (visit philips.com/warranties Complies 1/" with (115mm) FCC,CFR title for details) 7 part 15 Class B for EMI/ RFI. Dimmable with standard Labels electronic low voltage (ELV) & Triac dimmers. Dims to culus type IC listed suitable for less than or equal to % of damp location. AirSeal. relative high output. 5 year This product complies with the limited warranty. requirements of the California 1/" 6. Ceiling cutout: ¾" diameter. Energy Commission regulated (11mm) under Title, and has been 1/16" listed (5mm) in the Title 0 database. 1/16" 1/" Energy (5mm) Star 7/16" (11mm) Product family has Energy Star certification with the 5/" (mm) following exception: All 90 CRI options 0-1/" Title Product family M has Title certification ceiling with the thickness following exception: All 80 CRI options /" (5mm) (0-5mm) M 58 Cutoff
RA 1/8" (5mm) Reflector LyteCaster " Round 1/" (115mm) 1/16" (5mm) 1/" (115mm) 1/16" (5mm) NZV New construction non IC 0-V frame-in kit Bottom view 7/16" 11 1/" (0mm) 7/16" 1/8" (mm) 7/16" 0-5mm) 5/" (mm) 1" Min. (0mm) " Max. (6mm) (0-5mm) M ceil 5 /8" (16mm) 7 1/" (0mm) 0-1/" 5/" (mm) M ceil Round trim 0-1/" M ceil Light engine 1" Min. ( " Max. (61 0-5mm) " (9mm) " (mm) 1/" (115mm) 5/" (mm) 1/8" 8 1/" (mm) 7/16" 5/" (5mm) 11 5/8" (96mm) 1 7/16" (mm) (0-5mm) Features M 1. Non-IC housing: # ga.. Junction box: ½" (6mm) (.06") thick Galvanized 58 Cutoff ceil x 5 /8" (17mm) x " (51mm) steel. culus listed for damp #1 ga. (.0 ) thick galvanized locations. AirSeal housing steel, culus listed 90 degrees 7 minimizes air leakage to less 1/" (0mm) C rated supply conductors. than CFM at 1.57 PSF (or Rated for branch circuit 75PA), complies with Title wiring supplying connected, International 1/16" Energy luminaires (daisy chaining). Conversation Code, 1/8" (5mm) (5mm) and 1/" (115mm). Mounting bars: #16 ga. (.059") Washington State Energy Code (section 50.) Frame provided 19/" (66mm) thick galvanized steel. Bars pivot for easy attachment with internal access door for and wire in from below the inspection of junction box. ceiling line. Bars can extend to. Lower 5/8" (118mm) frame and top accommodate 16" (06mm) to cover: # ga. (06 ") 5/" " (mm) (6mm) O.C. joist spacing. thick Galvanized steel. Accommodates ceilings up Bars can accommodate 1" (05mm) O.C. joist spacing to 1" (5. mm) thick. Bottom after slight field modification. (0-5mm) cover provided with a.5" (see instruction sheet) M (6.mm) lip and embossed Features integral self-tapping ceil 7/16" indicator lines to simplify screw phillips/square drive alignment during installation. screws for attachment to wood Housing can be locked into or metal construction. Attaches position on the mounting bars to T-bar ceilings without 5/" (mm) with locking screws. accessories. Bars installed on shortest dimension of frame can be easily rotated 90 from (0-5mm) original position. M ceil 5/8" (118mm) LyteCaster_R_Adjustable Nov016 11/16 5/" page (mm) of 6 1/" (115mm) 5/" (mm) 5. Electronic dimming driver: Class electronic LED driver, RoHS compliant, suitable for damp location. /77v 50/06Hz >.9 power factor. MTP (module thermal protection) current cutback up to % to prevent overheating. Sound rating Class 1/" (115mm) A (<db). Complies with FCC, CFR title 7 part 15 Class A for EMI/ RFI. Dimming Protocol (0-v). Dims to less than or equal to % of relative high output. 6. Ceiling cutout: ¾" diameter. 5/" (mm) 5/" Electrical (0-5mm) Input voltage: /77, input freq.:50/60hz. 1/8" M ceil Input current 1/" (115mm).1A/.06A Input Power 16.W, Power factor >.9 Warranty 5 year limited warranty. 1/16" (5mm) (visit philips.com/warranties for details) Labels culus listed suitable for damp location. AirSeal. Inherently Protected. IP rated. This product complies with the 1/" requirements of the California (11mm) Energy Commission regulated 1/16" under (5mm) Title, and has been listed in the Title 0 database. 1/16" 1/" For (5mm) 7/16" V only. (11mm) Energy Star Product family has Energy Star certification with the following exception: 0-1/" All 90 CRI options Title 7/16" M ceil Product family has Title certification with the following exception: All 80 /" (5mm) CRI options (0-5mm) M 58 Cutoff
RA LyteCaster " Round Electrical Specifications Frame-in kit Input volts Input freq. Input current LED drive current Input power LED power THD factor Power factor AE1 V 50/60Hz.090 A 60 ma.6 W 8.76 W <0% >.9 ANE1 V 50/60Hz.090 A 60 ma.6 W 8.76 W <0% >.9 CE1 V 50/60Hz.090 A 60 ma.6 W 8.76 W <0% >.9 NZU V 50/60Hz. A 60 ma 11.8 W 9.7 W <% >.8 77V 50/60Hz.07 A 60 ma 11.8 W 8.90 W <% >.8 Adjustment factors Color temperature (CCT) 700K = 88% 000K = 96% 500K = 0% Finish White Baffle (BW) = 0% White Cone (DW) = 0% Diffuse (DD) = 0% Chrome (DC) = % Color Rendering Index (CRI) 80 = 0% 90 = 85% 90 (CW) Crisp White = 78% 0 Horizontal Aiming 0 Vertical Aiming 0 D D 0 C FC L FC W C W L Beam spread: Spot Candela Curves Frame: NZU Light engine: 0885S Trim: RAD Report no : 556GFR 150 500 Output lumens: Input Watts 1 : Beam angle: Center beam: 797 lm 11.8 W 17 519 cd 0 Horizontal Aiming Efficacy: 67.6 lm/w CCT : 500 K CRI: 80 750 6 8 1.5.6 5.8 9 5...0.8.1.8.5.1 5000 0 Vertical Aiming 5.5 5. 8.7 16 7 1 6.6.8 5.1 6. 1. 1.8..0 1. Wattage: controlled to within ± %. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.77-008: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. LyteCaster_R_Adjustable Nov016 11/16 page 5 of 6
RA LyteCaster " Round Beam spread: Narrow flood Candela Curves Frame: NZU Light engine: 0885NF Trim: RAD Report no : 550GFR 00 Output lumens: Input Watts 1 : Beam angle: Center beam: 80 lm 11.8 W 75 cd Efficacy: 68.1 lm/w CCT : 500 K CRI: 80 0 Horizontal Aiming 000 6 8 1.5.6 5.8 67 8 17.1. 5. 6..7.6.5 5. 000 0 Vertical Aiming 5.5 5. 8.7 116 5 9 19.5 5. 7.0 8.8 1.6..1.9 Beam spread: Flood Candela Curves Frame: NZU Light engine: 0885F Trim: RAD Report no : 551GFR 500 00 Output lumens: Input Watts 1 : Beam angle: Center beam: 86 lm 11.8 W 0 190 cd 0 Horizontal Aiming Efficacy: 70.0 lm/w CCT : 500 K CRI: 80 1500 6 8 1.5.6 5.8 0 1. 5.9 7. 8.8.7 5.0 6. 7. 000 0 Vertical Aiming 5.5 5. 8.7 68 0 17 11 5.5 8..9 1.7.1.. 5. 1. Wattage: controlled to within ± %. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.77-008: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 016 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires LyteCaster_R_Adjustable Nov016 11/16 page 6 of 6 Philips Lighting North America Corporation 00 Franklin Square Drive, Somerset, NJ 0887 Tel. 855-86-16 Philips Lighting Canada Ltd. 81 Hillmount Rd, Markham, ON, Canada L6C S Tel. 800-668-9008