Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1
Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved Class 1 & 2, Division 1 & 2 and is rated for use in wet and marine environments. The 26" extended swing arm made of 1 1/2 square steel tube and metal halide lamp used with this unit provides operators with excellent power and efficiency coupled with high versatility and ease of use. **PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE** The EPL-DL-70LED-24 explosion proof dock light provides 6,020 lumens of light output. The 70 watt LED lamp assembly in this unit produces higher quality illumination with better color rendering and contrasting than typical 400 watt halogen lamps while drawing only 70 watts at 5.84 amps on12 Volts DC, or 0.59 amps on 120 Volts AC.The LED lamp runs cooler than 400 watt halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace. The LED lamp in this unit produces a brilliant flood pattern of light that is ideal for high vibration environments and general illumination in any area designated a hazardous location fitting thisunits` classification. A 26" extended swing arm made of 1 1/2 square steel tube provides adjustable mounting for a 70 watt light head and allows users to position the light as needed during loading and unloading operations. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge This explosion proof light fixture is comprised of a 70 watt LEDlight head mounted atop a 26" extended swing arm made of 1 1/2" square steel tube with powder coat yellow finish for durability. The swing arm allows a total of 180 degrees horizontal adjustment while the hinge bracket connecting the light to the arm provides both vertical and horizontal adjustment for a wide range of possible positions. Included with this unit is 6` of wire to be used to connect this unit in compliance with NEC methods for Class I, Div. I locations. The wire entrance is sealed and a 1/2 inch threaded NPT allows operators to make conduit connections at the base of the lamp head. The lamp assembly includes a 70 watt LED lamp and aluminum finish reflector in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock Page: 2
and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. TheLED lamp has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. Dark field without any illumination Click Photo to Enlarge Illuminated with the EPL-DL-70LED-24 Click Photo to Enlarge Durability: This unit incorporates a 70 watt LED lamp assembly containing seven CREE XLamp MC-E ten watt LEDs producing 860 lumens each, and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or duty cycle accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Click Photos to Enlarge Page: 3
5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated L6-15 Twist Lock Plug 15 Amp / 250V Rated UK BS1363 Straight Blade Plug 13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug 16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This cart mounted LED flood lighting system is equipped with 100 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3- blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Made in the USA Quality LED Benefits 1. High Efficiency and Output 70 Watt LED lamp. 2. 70 Watt LED Lamp Provides Cooler Operation.. 3. Rugged Die Cast Aluminum Lamp Housing. 4. 3/4" Shock Resistant Tempered Glass Lens. 5. Copper Free Shell, Covers and Sealed Fittings. 6. Vibration/Impact Resistant Construction. 7. Low Maintenance. 8. 50,000+ Hour Lamp Life. 9. UL Approved for Marine Environments. 1. Long lamp life. 2. High efficiency and low amp draw. 3. High durability and reliability. 4. High output and very good color rendering. 5. Vibration and shock resistant. 6. Low maintenance Page: 4
Specifications / Additional Information EPL-DL-70LED-24 Dock Light UL Listing: United States/Canada Dimensions: 11 9/16"-W 11 1/2-H 9 1/4"-Depth Led Type: CREE XLamp MC-E LED Total Watts: 70 Voltage:12VDC, Included 110-260 VAC to 12-24 VDC In-line Transformer UL and CSA Certified Class 1 Division 1, Groups C and D Class 1 Division 2, Group C, D Class II, Division 1-2, Groups F, G Class III UL 595 Marine Use Lamp Lumens: 6020 LED Lamp Life Expectancy: 50,000+ Hours Weight:25 Lbs. Mounting:26" Square Steel Swing Arm Transformer: DCP-11 Waterproof 12-24 VDC Transformer Operating Temp Range: T4 Rated Special Orders- Requirements Contact us for special requirements LED Drive %: 90% Toll Free: 1-800-369-6671 PWM Drivers: Active LED Heat Management & Current Regulation Intl: 1-903-498-3363 Wiring: 100 feet SOOW Cord,in-line transformer w/ cord cap E-mail: sales@larsonelectronics.com Cord Cap: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail Scroll Down to Purchase- This product does not qualify for free shipping. Part #: EPL-DL-70LED-24 (50825) Page: 5
Options: EPL-DL-70LED-24- CORD CAP Example: EPL-DL-70LED-24-5.15 CORD CAP 5-15 Straight -5.15 6-15 Straight -6.15 5-20 Straight -5.20 6-20 Straight -6.20 L5-15 Twist -L5.15 L6-15 Twist -L6.15 L5-20 Twist -L5.20 L6-20 Twist -L6.20 UK BS1363 -BS1363 Intl Schuko -SCHUKO Pigtail -PIGTAIL Page: 6
Page: 7
Page: 8
Page: 9
Page: 10
Links (Click on the below items to view): - Manual - Hi-Res Image 1 - Explosion Proof Dock Light (Main) - Hi-Res Image 2 - Explosion Proof Dock Light (Front) - Hi-Res Image 3 - Explosion Proof Dock Light (Angle 1) - Hi-Res Image 4 - Explosion Proof Dock Light (Side 1) - Hi-Res Image 5 - Explosion Proof Dock Light (Back Angle) - Hi-Res Image 6 - Explosion Proof Dock Light (Front Angle) - Hi-Res Image 7 - Explosion Proof Dock Light (Side 2) - Hi-Res Image 8 - Explosion Proof Dock Light (Adjusted 1) - Hi-Res Image 9 - Explosion Proof Dock Light (Adjusted 2) - Hi-Res Image 10 - Explosion Proof Dock Light (Adjusted 3) Page: 11