Learning Exchange: Prospectus Table of Contents Learnerships... Short Courses... 4 Short Courses Professional Drivers... 10 1
Learnerships 5085 National Certificate: Professional Driving The purpose of the qualification is to ensure competent professional driving competence in the road transport sector This course is intended for drivers who are working or who intend on working in the commercial transport industry Qualification Rules: All the Fundamental Component Unit Standards are compulsory - 36 credits. All the Core Component Unit Standards are compulsory - 30 credits. For the Elective Component learners are required to attain at least 54 credits out of 63 possible credits, including at least one of the following: 1354: "Operate a vehicle combination", 0 credits. 1353: "Operate a rigid heavy vehicle", 15 credits. (gross vehicle mass above 3,5 tons) 1357: "Operate a rigid light vehicle", 10 credits. (gross vehicle mass below 3,5 tons) Theory and practical, Stationery, Portfolio of Evidence, assessments, internal. All administrative and logistical support is supplied by Learning Exchange 6 1 Months 1 3 48940 National Certificate: Construction: Plant Operations The purpose of the qualification to provide a Qualification for persons who perform construction plant activities on Civil Engineering and Construction sites This course is aimed at Construction Plant Qualification Rules: Fundamental: 36 credits Theory and practical, Stationery, Portfolio of Evidence, assessments, internal, administrative and logistical support 6 1 months
Operations practitioners in the Industry, ensuring the upliftment of standards in general. Core: 85 credits Elective: 1 (Minimum) credits Credit total: Minimum of 133 credits 133 The bulk of the total credit value 85 is made up of the Core learning. This is due to the following: General and basic technical skills are combined in the Qualification A working knowledge of general site work and road works construction practices are compulsory in order for learners to exit as competent Construction Plant Operators who have acquired competencies in various areas of technical specialisation. 3
Short Courses 4974 - Operate a Counter Balanced Lift Truck A learner accredited with this standard will be able to operate lift trucks for the safe and efficient movement and stacking of freight in a variety of work environments There are a number of other unit standards which we present for specialised lift trucks such as reach trucks and rough terrain fork lifts. Should you have a special requirement, our staff will be able to assist you in identifying the correct unit standard for your equipment. Certificates issued for Lifting Equipment Operators comply with the requirements of the National Code of Practice for Lifting Equipment Operators and the Certificates issued are valid in terms of Legal Requirements This course is intended for counter balance lift Identify and classify freight truck operators. Handle Load and Store Freight Achieve maximum work performance of lifting equipment Operate equipment in accordance with operational and legislative SOP s Theoretical and practical assessments Access available support systems and emergency 100% attendance required services in case of incidents and accidents. Recertification : Days Novice training 5 Days Groups consist of 4 operators 6 3 4
116079 Operate a Rigid Body Dump Truck Operating rigid body dump trucks and demonstrating knowledge of the functions of rigid body dump trucks and starting, shutting down and operating procedures for the machine. This course is intended for operators of rigid body Demonstrate knowledge of the functions of a rigid dump trucks body dump truck. Understand warning lights and indicators Start and shut down procedures for the rigid body dump truck. Theoretical and practical assessments Operate rigid body dump truck. 100% attendance required Document rigid body dump truck use. Recertification : days per group of up Novices : Up tp 10 days per group of 6 levels 16 116333 Operate Back Hoe/ Loader (TLB) Operating back hoe loaders and demonstrating knowledge of the functions of back hoe loaders and starting, shutting down and operating procedures for the machine. This course is intended for operators of back hoe Demonstrate knowledge of the functions of a back loaders hoe loader. Understand warning lights and indicators Recertification : days per group of up Novices : Up tp 10 days per group of 6 5
Theoretical and practical assessments 100% attendance required Start and shut down procedures for back hoe loaders. Operate back hoe loaders. Document back hoe loaders use. levels 0 116047 Operate Excavator Operating excavators and demonstrating knowledge of the functions of excavators and starting, shutting down and operating procedures for the machine. This course is intended for operators of Demonstrate knowledge of the functions of an excavators excavator. Understand warning lights and indicators Start and shut down procedures for excavators. Operate excavator. Theoretical and practical assessments Document excavators use. 100% attendance required Recertification : days per group of up Novices : Up tp 10 days per group of 6 levels 0 6
116330 Operate an Articulated Dump Truck Operating articulated dump trucks and demonstrating knowledge of the functions of articulated dump trucks and starting, shutting down and operating procedures for the machine. This course is intended for operators of Demonstrate knowledge of the functions of an articulated dump trucks articulated dump truck. Understand warning lights and indicators Start and shut down procedures of the articulated dump truck. Theoretical and practical assessments Operate articulated dump truck. 100% attendance required Document articulated dump truck use. Recertification : days per group of up Novices : Up tp 5 days per group of 6 levels 16 11610 Operate a Skid Steer Loader Operating skid steer loader and demonstrating knowledge of the functions of skid steer loader and starting, shutting down and operating procedures for the machine. This course is intended for operators of skid steer Demonstrate knowledge of the functions of a skid loaders steer loader Start and shut down skid steer loader. Operate skid steer loader. Recertification : days per group of up Novices : Up to days per group of 6 7
Theoretical and practical assessments 100% attendance required Document skid steer loader use. levels 16 11610 Operate Front End Loader Operating front end loaders and demonstrating knowledge of the functions of front end loaders and starting, shutting down and operating procedures for the machine. This course is intended for operators of front end Demonstrate knowledge of the functions of a front loaders end loader. Understand warning lights and indicator lights Start and shut down front end loader. Operate front end loaders. Theoretical and practical assessments Document front end loader use. 100% attendance required Recertification : days per group of up Novices : Up tp 10 days per group of 6 levels 16 8
116073 Operate Water Cart Operating water carts and demonstrating knowledge of the functions of water carts and starting, shutting down and operating procedures for the machine. This course is intended for operators of water Demonstrate knowledge of the functions of a water carts cart. Start and shut down water cart. Operate water cart. Document water cart use. Theoretical and practical assessments 100% attendance required Recertification : Days Novice Training 4 Days Groups of 4 drivers 6 116089 Operate Roller (Ride on Roller and Impact Roller) Operating rollers and demonstrating knowledge of the functions of rollers and starting, shutting down and operating procedures for the machine. This course is intended for operators of rollers Theoretical and practical assessments 100% attendance required Demonstrate knowledge of the functions of a roller. Understand components and warning lights and indicators Start and shut down roller. Operate roller. Document roller use. TBA 8 9
Short Courses Professional Drivers 1354 Operate a Vehicle Combination The purpose of learning is to ensure safe, professional operation of vehicle combinations with a gross vehicle mass exceeding 3.5 tons, and consisting of a drawing vehicle and trailer/s. This course is intended for drivers of combination Prepare a vehicle combination for road transport vehicles trips according to specification Drive a vehicle combination in accordance with specified requirements. Ensure the maintenance of road transport service quality. Handle unexpected situations according to specified procedures. Theoretical and practical assessments Park vehicle combination in accordance with 100% attendance required specified requirements. Couple and uncouple a drawing vehicle and trailer/s according to specified procedures Theory and practical training, Portfolio of 4 Days 0 4 10