KATALOG GENERAL PRODUKTÓW

KATALOG GENERAL PRODUKTÓW CATALOGUE

Armetal was established in 1960 in Rocca San Casciano, just 30 km from Forlì. Since then, the company has developed and grown constantly thanks to the commitment and passion for work of two generations of the Pazzi family who turned it into a market-leading manufacturer of convertible mechanisms for the sofa-bed and bed frame industry. Today the company extends over 40,000 sqm, including a 14,000 sqm indoor area, where the entire production process is carried out, from the concept to the finished product, thanks to its great experience and cutting-edge equipment. In 2007 Armetal founded Armetalflex, a firm manufacturing mattresses to be combined with its mechanisms, offering its customers a wide range, both in the spring type and in the polyurethane foam one to guarantee an even better service. The secret of Armetal s success is understanding both the market and customers requirements to provide an efficient, high quality and competitive service, offering top rate products with the support and availability of a highly trained staff. 3

Cutting State-of-the-art, numerical control, cutting-off machines guarantee a steady millimetre accuracy to all metal tubular components. Workbench drilling This drilling machine makes high precision holes simultaneously on the perimeter tubular sections of the mechanisms. Moulding Only first-rate metal sheets, with the maximum tolerance of a tenth of a millimetre, are used. They are worked in mechanical presses using, for each component, special step moulds fed by centesimal accuracy numerical control unwinding and straightening devices. Painting A 1,500 sqm surface houses: the phosphate degreasing tunnel, the drying kiln and a modern computerised painting booth where epoxy powder is released by 14 numerical control dispensers that guarantee an even painting on every part of the mechanism. Welding Computerised robots work in a more than 200 sqm welding station, on special workbenches, performing high precision welding operations. Deliveries Armetal delivers most of its products directly through its own trucks and highly qualified personnel. Armetal relies on international couriers for deliveries abroad. 4 5

CONTENTS Introduction Eolo - 180 (slat bed frame) Eolo - 180 (electro-welded bed frame) Eolo mattresses Scirocco 190 Scirocco mattresses Euro 190 Euro mattresses Tornado 190 Tornado - 190 AIR OPENING-CLOSING instructions for Tornado Tornado / Tornado AIR mattresses Grecale De Luxe - 190 H12 Grecale De Luxe - 195 H14 Grecale De Luxe H14 mattresses Grecale De Luxe - 195 H18 Grecale De Luxe WHOLE SLATS Grecale De Luxe DOUBLE SLATS OPENING-CLOSING instructions for Grecale Tifone 195 Accessories 1-3 7 9 11 13 15 17 19 21 23 24 25 27 29 30-33 35 36 37 39 41 43 6 7

slats Eolo - 180 CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG EL172 172 x 62 180 x 155 32 4,0 EL162 162 x 62 180 x 145 30 3,7 EL152 152 x 62 180 x 135 29 3,4 EL142 142 x 62 180 x 125 28 3,1 EL132 132 x 62 180 x 115 27 2,9 EL122 122 x 62 180 x 105 25 2,7 EL112 112 x 62 180 x 95 23 2,5 EL102 102 x 62 180 x 85 21 2,2 EL 92 92 x 62 180 x 75 19 2,0 EL 82 82 x 62 180 x 65 17 1,7 TECHNICAL SPECIFICATIONS Standard depth cm 62 Depth on request cm 56 Distance of the base frame from the ground cm 4 or 8 cm depending on the version Polyurethane mattress: Height 7/8 cm Length 180 cm Base Cover Rings ø 25 mm Steel Handle Ring-shaped Polyester Handle MATTRESS MODELS Eolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric Eolo 180 polyurethane mattress D. 25, height 7 cm, Cotton Cover Eolo 180 polyurethane mattress D. 30, height 8 cm, cover in Quilted Cotton TECHNICAL DRAWING 22 185 Mattress height 25 27 4/8 7/8 39 Space-saving 3-fold fitting mechanism. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. The bearing frame includes a metal sheet side with holes designed for fastening it to the box. This mechanism can be combined with a polyurethane foam mattress (7x180 cm). 62 Width Base Cover Rings Steel Handle Ring-shaped Polyester ø 25 mm Handle 8 9

electro-welded bed frame Eolo - 180 CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG EL172 172 x 62 180 x 155 32 4,0 EL162 162 x 62 180 x 145 30 3,7 EL152 152 x 62 180 x 135 29 3,4 EL142 142 x 62 180 x 125 28 3,1 EL132 132 x 62 180 x 115 27 2,9 EL122 122 x 62 180 x 105 25 2,7 EL112 112 x 62 180 x 95 23 2,5 EL102 102 x 62 180 x 85 21 2,2 EL 92 92 x 62 180 x 75 19 2,0 EL 82 82 x 62 180 x 65 17 1,7 TECHNICAL SPECIFICATIONS Standard depthcm 62 Depth on request cm 56 Distance of the base frame from the ground cm 4 or 8 cm depending on the version Materasso in poliuretano H. cm 7/8 Lung. cm 180 Base Cover Rings ø 25 mm Steel Handle Ring-shaped Polyester Handle MATTRESS MODELS Eolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric Eolo 180 polyurethane mattress D. 25, height 7 cm, Cotton Cover Eolo 180 polyurethane mattress D. 30, height 8 cm, cover in Quilted Cotton TECHNICAL DRAWING 22 185 Mattress height 62 A 25 27 4/8 8 39 Space-saving 3-fold fitting mechanism. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. The bearing frame includes a metal sheet side with holes designed for fastening it to the box. This mechanism can be combined with a polyurethane foam mattress (7x180 cm). Width Base Cover Rings Ø 25mm 10 11 Steel Handle Ring-shaped Polyester Handle

Eolo - 180: MATTRESS density 21 7 Eolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric density 25 7 Eolo 180 polyurethane mattress D. 25, height 7 cm, Cotton Cover density 30 8 Eolo 180 polyurethane mattress D. 30, height 8 cm, cover in Quilted Cotton 12 13

elastic belts and slats Scirocco - 190 CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG SC182 182 x 82 190 x 160 30 24 SC162 162 x 82 190 x 140 26 22 SC142 142 x 82 190 x 120 23 19 TECHNICAL SPECIFICATIONS Standard depth cm 82 Distance of the base frame from the ground cm 10 Polyurethane mattress: Height 10/12 cm Length 190 cm Base Cover Rings Ø 25 mm Polyester Handle with Hooks MATTRESS MODELS Scirocco 190 polyurethane mattress: D. 25, 10 cm high, Cotton Cover Scirocco 190 polyurethane mattress: D. 30, 10 cm high, cover in Quilted White Stretch Fabric Scirocco 190 polyurethane mattress: D. 30, 12 cm high, cover in Quilted White Stretch Fabric TECHNICAL DRAWING 30 191 10 43 Mattress height 27 10/12 38 82 Base Cover Rings Ø 25 mm Ring-shaped Polyester Handle Width 2-fold fitting mechanism with front opening by lifting. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. The bearing frame includes a metal sheet side with holes designed for fastening it to the box. The bed surface is made of wooden slats while the seat is provided with elastic belts. This mechanism can be combined with a polyurethane foam mattress (10/12x190 cm). 14 15

Scirocco - 190: MATTRESS density 25 10 Scirocco 190 polyurethane mattress: D. 25, 10 cm high, Cotton Cover density 30 10 Scirocco 190 polyurethane mattress: D. 30, 10 cm high, cover in Quilted White Stretch Fabric density 30 12 Scirocco 190 polyurethane mattress: D. 30, 12 cm high, cover in Quilted White Stretch Fabric 16 17

Electro-welded bed frame and elastic belts CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG ER 182 182 x 76 190 x 160 33 25 ER 162 162 x 76 190 x 140 31 22 * ER 152 152 x 76 190 x 130 29 20 ER 142 142 x 76 190 x 120 28 19 ER 132 132 x 76 190 x 110 27 17 * ER 122 122 x 76 190 x 100 26 15 * ER 112 112 x 76 190 x 9 25 13 ER 92 92 x 76 190 x 7 22 10 * this model is produced on request for a minimum order of 50 pieces MATTRESS MODELS TECHNICAL SPECIFICATIONS Standard depth cm 76 Distance of the base frame from the ground cm 5 Base Cover Rings Ø 25 mm Polyester Handle with Hooks Euro - 190 Euro 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Fabric Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric, REMOVABLE COVER Euro 190 spring mattress, cm 14 high, polyurethane and wadding, Cotton Cover TECHNICAL DRAWING 44 27 5 30 192 Mattress height 38 12/14 2-fold fitting mechanism with front opening by lifting. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. The bearing frame includes a metal sheet side with holes designed for fastening it to the box. The bed surface is made of a rectangular electro-welded mesh while the seat is provided with elastic belts. This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm). Width Polyester Handle with Base Cover Rings 18 Hooks Ø 25 mm 19

Euro_190: MATTRESS density 25 13 Euro 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Fabric density 30 13 Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric density 30 13 Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric, REMOVABLE COVER polyurethane and waddin 14 20 Euro 190 spring mattress, cm 14 high, polyurethane and wadding, Cotton Cover 21

electro-welded bed frame Tornado - 190 CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG TR 180 180 x 82 190 x 160 37 24 TR 160 160 x 82 190 x 140 34 22 TR 140 140 x 82 190 x 120 31 20 TR 95 95 x 82 190 x 75 24 14 MATTRESS MODELS TECHNICAL SPECIFICATIONS Depth cm 82 Distance of the base frame from the ground cm 8 Polyester Handle with Hooks Base Cover Rings da Ø 25/30 mm Panel Locking Brackets NEW Armetal bayonets with through-hole Tornado 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Tornado 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric Tornado 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER Tornado 190 spring mattress, 14 cm high, polyurethane and wadding, Cotton cover TECHNICAL DRAWING 26 42 8 82 32 28 33 14 54 14 82 194 42 13/14 2-fold fitting mechanism with front opening by lifting. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. On request, a frame to hold the seat cushions and bayonets already welded to the frame are available, for a quick assembly of armrests and backrest. The bed surface is made of a rectangular electro-welded mesh and the seat is available both in the electro-welded mesh version and with elastic belts. This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm). A Width Polyester Handle Base Cover Rings Panel Locking Brackets NEW Armetal Bayonets with Hooks da Ø 25/30 mm with through-hole 22 23

Electro-welded bed frame with liftable backrest Tornado - 190 - AIR CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG TR 180 180 x 82 190 x 160 34 24 TR 160 160 x 82 190 x 140 31 22 TR 140 140 x 82 190 x 120 28 20 TR 95 95 x 82 190 x 75 22 14 MATTRESS MODELS TECHNICAL SPECIFICATIONS Depth cm 82 Distance of the base frame from the ground cm 8 Base cover rings Iron backrest and joining bar Backrest lift mechanism this model is produced on request for a minimum order of 50 pieces Tornado AIR 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Tornado AIR 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric Tornado 190 AIR polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER Tornado 190 AIR spring mattress, 14 cm high, polyurethane and wadding, Cotton cover TECHNICAL DRAWING 26 33 194 8 42 32 28 42 Mattress height 13/14 82 14 54 14 Width 82 2-fold fitting mechanism with front opening by lifting. The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders. The bearing frame includes a metal sheet side with holes designed for fastening it to the box. The bed surface is made of a rectangular electro-welded mesh while the seat is provided with elastic belts. This model is equipped with a frame that holds the seat cushions. On request, a backrest and a pair of lift mechanisms are available to lift the backrest cushions making bed pull-out easier. This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm). 24 25

Instructions for OPENING Tornado 1 : Seize the handle as shown in detail E, placing your hand in the middle, under the cushions. Tornado / Tornado AIR : MATTRESS density 25 13 2 : Note: In the models with a cushion-holding frame, firstly lift the cushion surface, as shown in Fig. 2, then grab the handle as shown in detail E. Using the handle, lift the mechanism by about 20 cm, then pull it until the first front foot rests on the ground. Tornado/Tornado AIR 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton density 30 3 : Lift and turn the second front foot F, grabbing it as shown in detail F until it rests on the ground. 13 Instructions for CLOSING Tornado 4 : In order to close the mechanism, lift it starting from point A and, at the same time, apply pressure on point B until a 180 rotation is completed. Tornado/Tornado AIR 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric density 30 13 Tornado/Tornado 190 AIR polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER 5 : Make sure that the front foot F completes a 90 rotation and it placed behind the cushions in point C. Lift the mechanism grabbing the handle found in point E, then apply pressure inwards in the direction shown by the arrows. 6 : In the models with a cushion holding frame, lower the cushions at the end. polyurethane and wadding 14 Note: Make sure that no quilts and/or cushions are left inside t he mechanism 26 Tornado/Tornado 190 AIR spring mattress, 14 cm high, polyurethane and wadding, Cotton cover 27

Electro-welded bed frame and elastic belts CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG GC 180 180 x 86 190 x 160 41 24 GC 160 160 x 86 190 x 140 38 22 GC 140 140 x 86 190 x 120 35 20 GC 92 92 x 86 190 x 75 28 14 TECHNICAL SPECIFICATIONS Depth cm 86 Distance of the base frame from the ground cm 8/10 Grecale De Luxe - 190 - H12 MATTRESS MODELS Grecale de Luxe 190 polyurethane mattress: D. 25, 12 cm high, cover in Quilted Cotton Grecale de Luxe 190 polyurethane mattress: D. 30, 12 cm high, cover in quilted White Stretch Fabric Mechanism with welded bayonets Standard backrest Cushion-holding backrest and ratchet Backrest split in two Panel locking brackets NEW Armetal bayonets Grecale de Luxe 190 polyurethane mattress: D. 30, 13 cm high, cover in quilted White Stretch Fabric, WITH REMOVABLE COVER TECHNICAL DRAWING 7 30 55 195 85 74 190 12 26 47 22 13 40 44 92 A 8 cm 18 50 18 86 Convertible mechanism with front opening performed by rotating of the backrest and then unrolling the frame in a single movement without removing the seat cushions and the backrest. The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest. The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa beds for daily use, households, hotels and cruise ships. The seat is provided with elastic belts to ensure a better comfort. The backrest is available in the standard and a cushion-holding version. This mechanism can be combined with a polyurethane foam mattress (12x190 cm). The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014) 194 28 29

Electro-welded bed frame and elastic belts CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG GC 180 180 x 86 195 x 160 41 24 GC 160 160 x 86 195 x 140 38 22 GC 140 140 x 86 195 x 120 35 20 GC 92 92 x 86 195 x 75 28 14 TECHNICAL SPECIFICATIONS Depth cm 86 Distance of the base frame from the ground cm 8/10 Mechanism with welded bayonets Standard backrest Cushion-holding backrest and ratchet Backrest split in two Panel locking brackets NEW Armetal bayonets Grecale De Luxe - 195 - H14 A detail of the Grecale de Luxe closing mechanism A detail of Grecale de Luxe mattress-holding device TECHNICAL DRAWING 7 30 55 195 Mattress height 85 74 190 13/14 44 92 rapp. nr. 174414 del 29/04/2014 26 47 Width 8 cm 18 50 18 86 194 22 13 40 Convertible mechanism with front opening performed by rotating of the backrest and then unrolling the base in a single movement without removing the seat cushions and the backrest. The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest. The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa beds for daily use, households, hotels and cruise ships. The seat is provided with elastic belts to ensure a better comfort and a soft feel. The backrest in available in the standard and in a cushion-holding version. This mechanism can be combined with a spring mattress (14x190 cm o 14x195 cm) or with a polyurethane foam mattress (13x190 or 13x195 cm). The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014) 30 31

Grecale De Luxe - H14: MATTRESS Grecale de Luxe 195 polyurethane mattress: D. 21, 14 cm high, cover in Quilted Jacquard fabric Grecale de Luxe 195 polyurethane mattress: D. 25, 14 cm high, cover in Quilted Jacquard fabric Grecale de Luxe 195 polyurethane mattress: D. 30 and MY Memory: D. 50, 13 cm high, removable cover in Quilted White Stretch fabric Grecale de Luxe 195 polyurethane mattress: D. 30, cm 14 high, cover in Quilted Cotton Grecale de Luxe 195 polyurethane mattress: D. 30, HR (high resistance) flameproof, 12 cm high, cover in FLAMEPROOF fabric Grecale de Luxe 195 spring mattress: 14 cm high, Cotton cover 32 33

Grecale De Luxe - H14: MATTRESS Grecale de Luxe 195 polyurethane mattress: D. 21, 13 cm high, cover in Quilted Stretch Fabric, WITH REMOVABLE COVER Detail of the types of quilted fabrics availablev Grecale de Luxe 195 polyurethane mattress: D. 30, 13 cm high, cover in Aloe Quilted Hypoallergenic Polyester Stretch Fabric 34 35

electro-welded bed frame and elastic belts CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG GC 180 180 x 86 195 x 160 44 24 GC 160 160 x 86 195 x 140 41 22 GC 140 140 x 86 195 x 120 38 20 GC 92 92 x 86 195 x 75 31 14 MATTRESS MODELS Grecale de Luxe 195 polyurethane mattress, D. 25, cm 18, cover in Quilted Jacquard Fabric TECHNICAL SPECIFICATIONS Depth cm 86 Distance of the base frame from the ground cm 8/10 Mechanism with welded bayonets Standard backrest Cushion-holding backrest and ratchet Backrest split in two Panel Locking Brackets NEW Armetal Bayonets Grecale de Luxe 195 polyurethane mattress, D. 30, non-deformable, 18 cm high with a 5 cm layer of breathable and cooling Memory (5 different zones), removable cover in Quilted Coolmax Stretch Fabric Grecale De Luxe - 195 - H18 Grecale de Luxe 195 polyurethane mattress: D. 30, non-deformable, 18 cm high, with breathable and cooling properties in differentiated zones, cover in Aloe Stretch Quilted Fabric. Detail of a polyurethane mattress with 5 different zones and a 5 cm Memory 50 layer Grecale de Luxe 195 spring mattress, 18 cm high, cover in Quilted Jacquard Fabric TECHNICAL DRAWING 7 30 85 44 55 47 26 92 74 8 cm rapp. nr. 174414 del 29/04/2014 86 195 190 18 22 13 A 18 50 18 194 40 Convertible mechanism for a 18 cm high mattress, with front opening system by rotating the backrest and then unrolling the frame with a single movement without having to remove the seat cushions and the backrest. The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest. The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa-beds for daily use, both for the domestic market as well as for hotels and cruise ships. The seat is provided with elastic belts to ensure a better comfort and a soft feel. The backrest in available in the standard and in a cushion-holding version. This mechanism can be combined with a spring mattress (18x195 cm) or with a polyurethane foam mattress (18x195 cm). 36 37

Grecale De Luxe - 195 - DOUBLE SLATS this model is produced on request for a minimum order of 50 pieces Grecale De Luxe - 195 - WHOLE SLATS this model is produced on request for a minimum order of 50 pieces BACKREST MODELS - Grecale de Luxe Convertible mechanism with front opening system by rotating of the backrest and then unrolling the base in a single movement without removing the seat cushions and the backrest. The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest. The bed surface is made of wooden slats that make it as comfortable as a standard bed. The seat is provided with elastic belts to ensure a better comfort and a soft feel. The backrest in available in the standard and in a cushion-holding version. This mechanism can be combined with a spring mattress (14x190 or 14x195 cm) or with a polyurethane foam mattress. (12/13x190 cm or 12/13x195 cm). The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014) 38 39

Instructions for OPENING Grecale de Luxe 1 / 2: Lift the mechanism in the direction indicated by the arrow, grabbing the backrest and causing it to rotate by 90 as shown by the arrow. 3 : Grab the end part of the bed and bring it closer to the floor with a simple rotation as shown by the arrows. 4 : The sofa in the bed position. Instructions for CLOSING Grecale de Luxe 5 : In the first closing phase, lift part B of the mechanism and rotate it by about 90, applying pressure on point A. 6 : Exert pressure on the backrest and rotate it in the direction shown by the arrows. 7 : Lastly, apply pressure on the backrest. Note: Make sure that no quilts and/or cushions are left inside the mechanism 40 41

slats Tifone - 195 CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG TF 170 170 x 195 195 x 170 48 34 TF 160 160 x 195 195 x 160 44 32 TECHNICAL SPECIFICATIONS Standard depthcm 197 Distance of the base frame from the ground cm 4 Mattress length: 195 cm TF 140 140 x 195 195 x 140 40 28 TF 120 120 x 195 195 x 120 36 24 TF 90 90 x 195 195 x 90 31 18 TF 80 80 x 195 195 x 80 28 16 Joining cross-beam NEW Armetal bayonets with through-hole MATTRESS MODELS Tifone 195 polyurethane mattress: D. 30, 21 cm high, cover in Quilted Jaquard Fabric TECHNICAL DRAWING Mattres 21 195 Orthopaedic bed with box in which the sleep surface can be lifted to make a compartment located under the frame available, where cushions and blankets can be placed. This movement is allowed by a pair of gas pistons The frame consists of highly-resistant tubular steel and it is painted with oven-dried epoxy powder. The sleep surface is an orthopaedic one with curved wooden slats. The box can be fully removed for easy transport. 26 29 197 Width NEW Armetal bayonets with Joining cross-beam through-hole 42 43

Panel Locking Brackets NEW Armetal Bayonets mm 25 Ø mm 25/30 Ø Rubber Plugs Screws for Backrests Rings with Hook in poliestere ad anello in poliestere con ganci in acciaio Plastic Feet Mechanism Opening Handles 44 45

Via Nazionale, 7-9-11-47017 Rocca S. Casciano Forlì - Italia Tel. (++39).0543.960139 Fax (++39).0543.950063 www.armetalitalia.com - info@armetalitalia.com