Highest Performance: Dyna Series

Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications to give you a feel for our capabilities. The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space and configuration advantages of worm gearing with the high efficiencies of bevel gearing. The result is that the Dyna Series is able to achieve ratios up to 1:1 in a single stage and ratios up to 100:1 in 2 stages. DSX version for the highest performance available! The DSX is our flagship right angle hypoid gearbox that has been optimized for the most demanding motion control applications that require high angular accuracy. Featuring hypoid gears that have been ground, the DSX has the smoothest torque transmission and extremely low backlash and noise levels. Contact GAM for further information on the DSX. Dyna Series benefits include: Ratios up to 1:1 in a single stage the highest in the market and 100:1 in just two gear stages High efficiencies High allowable axial and radial loading Ultra low backlash Back drivable Multiple output shaft configurations and hollow output 1 2 High ratio version 1. Aluminum Housing (Aluminum housing significantly reduces the weight of the gearbox) 2. Hypoid Gearing (Optimized gearing allows ratios up to 1:1 in a single stage; 100:1 in two stages. DSX gears are ground for improved performance.) 9 www.electromate.com. Adapter Flange (Customized adapter flanges for quick and easy mounting to any motor). Coupling (Gearbox can be supplied with either a bellows or elastomer coupling). Tapered Roller Bearings (Roller bearings for high radial and axial loading). Output Shaft (Gearbox can be supplied with one or two solid shafts or hollow shafts)

Highest Performance: Dyna Series DS-W Single output shaft configuration with our high performance bellow coupling input and machined motor flange to mount to any servo motor Frame sizes from mm to 190 mm DSX option available DS-H Hollow bore output configuration with our high performance bellow coupling input and machined motor flange to mount to any servo motor Zero-backlash shrink disk coupling on the output included with the gearbox Frame sizes from mm to 190 mm DSX option available DS-T Dual output shaft configuration with our high performance bellow coupling input and machined motor flange to mount to any servo motor Frame sizes from mm to 190 mm DSX option available DS-F Flange output allows connection of pinion gears, pulleys, rotary index tables, and transmission shafting directly to the output for a more compact and stiffer solution Frame sizes from mm to 190 mm DSX option available www.electromate.com 0

Highest Performance: Dyna Series The Advantage of Hypoid Gearing The GAM Hypoid offers significant advantages over other conventional right-angle gears. Conventional spiral bevel gearing, meshing in the position shown at the bottom of the drawing, has a purely rolling meshing action that is mechanically very efficient. Its drawback is that it offers the smallest total tooth contact area, so its torque throughput capacity is lower. Single-stage spiral bevel gearing is limited to about a :1 reduction ratio. It s easy to get higher ratios with multiple-stage configurations, but the additional gear stage lowers mechanical efficiency, increases backlash, consumes space and weight and reduces reliability. Conventional worm gearing, meshing in the position shown at the top of the drawing, has a very high total tooth contact area. While it offers high torque throughput and high ratio reduction, worm gearing has the lowest mechanical efficiency, due to the friction generated by its high component of sliding action. Worm gearing is also subject to the kind of wear that demands adjustment in order to maintain accuracy. Hypoid gearing, meshing at the intermediate position, offers mostly rolling action with a small component of sliding action. It has a greater tooth contact area than bevel gearing, so its load-carrying capability is greater. The GAM Hypoid offers further advantages by going up to a 1:1 gear ratio in a single stage with efficiencies between 9% and 9%, depending upon ratio throughout the speed range. Another important design criterion for precision servo applications is, of course, low backlash in the gear box. The GAM Hypoid offers two important advantages: Single-stage design eliminates backlash from a second set of meshing gears Accurate machining and assembly alignment high-accuracy models offer backlash of 2 arcminutes. GAM Hypoid gearing is available in two product ranges, our highest precision Dyna Series, and high precision, Dyna-Lite Series. The placement of the input gear along the arc of the driven gear has a significant impact on load-carrying capabilities and mechanical efficiency 1 www.electromate.com

Highest Performance: Dyna Series Dyna Series 7 90 11 10 190 Stock Ratios 1),, 10, 1, 0, 0, 100,, 10, 1 N/A All Ratios Available 1-stage:,,,, 8, 10, 12, 1 2-stage: 2, 0, 0, 0, 70,100 -stage: consult GAM :1 (10) 70 (20) 10 (129) 20 (201) 700 (19) 100 (1291) :1 (01) 8 (02) 1 (120) 2 (227) 90 (107) 10 (1199) :1 (292) (7) 11 (119) 20 (221) 70 (90) 1280 (1129) :1 2 (28) 1 (0) 12 (1097) 20 (212) 0 (81) 1200 (1021) Nominal Output Torque (T 2n ) Nm (lb-in) 8:1 0 (2) (9) 11 (1018) 220 (197) 0 () 1120 (991) 10:1 28 (28) (9) 10 (929) 200 (1770) 0 (9) 100 (920) 12:1 2 (221) 0 () 9 (81) 180 (19) 80 (28) 90 (808) 1:1 22 (19) (98) 80 (708) 10 (11) 00 (0) 800 (7081) All 2-Stage Ratios (10) 70 (20) 10 (129) 20 (201) 700 (19) 100 (1291) Max Acceleration Output Torque (T 2B ) Nm (lb-in) - 1. x Nominal 1. x Nominal 1. x Nominal 1. x Nominal 1. x Nominal 1. x Nominal :1-:1 70 (20) 10 (129) 280 (278) 20 (02) 100 (1291) 2800 (2782) Emergency Output Torque 8:1-10:1 0 (1) 110 (97) 20 (20) 0 (89) 1280 (1129) 220 (1982) Nm (lb-in) (T 2not ) 12:1-1:1 0 () 100 (88) 190 (182) 0 (18) 90 (897) 1900 (181) All 2-Stage Ratios 70 (20) 10 (129) 280 (278) 20 (02) 100 (1291) 2800 (2782) Nominal Input Speed ) (n 1n ) RPM 1 Stage 000 000 000 000 000 200 2 Stage 000 000 200 200 2800 200 Max Input Speed ) (n 1max ) RPM 1 Stage 8000 8000 7000 000 000 00 2 Stage 000 000 000 000 000 00 Standard Output Backlash (j) arcmin 1 Stage < < < < < < 2 Stage <7 <7 < < < < Reduced Output Backlash (j) arcmin 1 Stage < < <2 <2 <2 <2 2 Stage < < < < < < Noise Level (L PA ) db - <70 <71 <7 <7 <7 <7 Allowable Radial Load ) (F rad ) N (lbs) - 00 (787) 800 (8) 000 (899) 700 (18) 11000 (27) 1000 (72) Allowable Axial Load (F axial ) N (lbs) - 100 (1) 120 (2) 100 (0) 000 (7) 00 (989) 000 (19) Maximum Tilting Moment Nm (lb-in) - 1 (128) 17 (11) 28 (210) 10 (1) 990 (87) 10 (10) Torsional Stiffness (C t21 ) Nm/arcmin 1 Stage 2.1 (18.).2 (7.2) 10. (92.9) 2. (207.1) 1.8 (7.0) 12 (111.2) (lb-in/arcmin) 2 Stage 2.1 (18.).2 (7.2) 10.2 (90.) 22.8 (201.8) 0.1 (1.9) 119.2 (10.0) (m) kg (lbs) 1 Stage (.) (1.2) 10 (22.0) 17 (7.) 9 (8.0) (121.) 2 Stage (8.8) 7 (1.) 11 (2.) 22 (8.) 9 (108.0) (1.) :1 0.8 (0.200) 1.2 (0.1).1 (1.1) 8.9 (2.901) 29.7 (10.19) 91. (1.199) :1 0.9 (0.10) 0.99 (0.9) 2. (0.81).0 (2.01) 20 (.8) 1.2 (20.91) :1 0.7 (0.122) 0.8 (0.28) 1.98 (0.77).79 (1.7) 1.7 (.02).1 (1.12) :1 0.28 (0.088) 0.77 (0.2) 1.2 (0.2).0 (1.81) 11.7 (.998).9 (11.92) 8:1 0.21 (0.07) 0. (0.22) 0.98 (0.27). (1.18) 9.08 (.10) 2.8 (8.81) 10:1 0.192 (0.0) 0.12 (0.209) 0.82 (0.288).0 (1.09) 7.8 (2.8) 21.8 (7.9) kg cm 2 12:1 0.181 (0.02) 0.92 (0.202) 0.78 (0.27) 2.87 (0.981) 7.1 (2.0) 19. (.98) (lb-in 2 ) 1:1 0.17 (0.08) 0.8 (0.19) 0.71 (0.2) 2.72 (0.929). (2.28) 19. (.) 0:1 0.0 (0.18) 0.87 (0.1) 1.09 (0.7).0 (1.82) 7.100 (2.2) 1.9 (.7) 0:1 0.7 (0.12) 0.02 (0.17) 1.08 (0.70).77 (1.188).00 (1.72) 7.2 (2.0) 0:1 0. (0.121) 0.7 (0.128) 1.009 (0.).292 (1.12).88 (1.99).0 (1.91) 70:1 0.2 (0.120) 0. (0.122) 0.978 (0.).0 (1.172).779 (1.).918 (1.81) 100:1 0.2 (0.117) 0. (0.118) 0.98 (0.21).10 (1.070).879 (1.2).018 (1.7) Efficiency at Load :1-8:1 > 9% 10:1-1:1 > 9% 0:1-100:1 > 92% Service Life >0,000 hours Lubrication Synthetic Oil: ISO VG 100 Protection Rating IP Operating Temperature Range -10 C to 90 C 1) Stock ratios listed are available in Standard AND Reduced Backlash. 2) Nominal torque and speed values listed are for gear tooth ratings. Use thermal limit for continuous operation. ) DSX Precision ground gearing for quieter and smoother operation, improved accuracy, and repeatability. ) Load applied at center of output shaft @00 RPM. ) Stiffness values relate to DS-W version only. Stiffness for DS-H,F may vary slightly- contact GAM for values. ) Higher input speeds may be possible consult GAM. www.electromate.com 2

Dyna Series - DS-W, DS-H, DS-T, DS-F 1 W2 D7 H7 D11 h8 D12 H7 9 0 W1 f2 2 f1 D H7 L L7 L D H7 D f7 D8 0 D g L 8 1 L D1 DS-F DS-H L L9 L8 L L9 L8 f f L L9 L8 2 2 D g L L D1 D8 0 D2 k DS-T D2 k D2 k f1 DS-W 1 7 D9 k Recommended Output Coupling (if necessary) metal bellows KM-0 KM-170 KM-270 KM-00 KM-100 KSD-200 elastomer EKM-0 EKM-10 EKM-00 EKM-00 EKM-1000 - Contact GAM for DSX Drawings www.electromate.com TYPE CODES FOR DYNA SERIES Example: DS - W B - 090-00 G - [11-201] - S111 Gearbox Series DS = Dyna Series DSX = Dyna Series Extreme Gearbox Style W = Single output shaft T = Dual output shaft H = Hollow output shaft F = Flange output Input Type B = Bellows coupling input E = Elastomer coupling input L = Shaft input Gearbox Size 0, 07, 090, 11, 10, 10, 10, 190 Ratio 00, 00, 00, 00, 008, 010, 012, 01, 00, 00, 00, 070, 100 Special Options Assigned by GAM Motor Mount Kit Assigned by GAM Options Available for This Product LOW OUTPUT OPTION BACKLASH KEYWAY A= Y N C= Y Y G= N Y H= N N Options C and G N/A for DS-F/H models. Tolerances (mm) Size k g h8 f7 H7 h Over +0.010-0.00 0-0.01 +0.01 0 Thru 10 +0.001-0.01-0.022-0.028 0-0.009 Over 10 +0.012-0.00 0-0.01 +0.018 0 Thru 18 +0.001-0.017-0.027-0.0 0-0.011 Over 18 +0.01-0.007 0-0.02 +0.021 0 Thru 0 +0.002-0.020-0.0-0.01 0-0.01 Over 0 +0.018-0.009 0-0.02 +0.02 0 Thru 0 +0.002-0.02-0.09-0.0 0-0.01 Over 0 +0.021-0.010 0-0.0 +0.00 0 Thru 80 +0.002-0.029-0.0-0.0 0-0.019 Over 80 +0.02-0.012 0-0.0 +0.0 0 Thru 120 +0.00-0.0-0.0-0.021 0-0.022 Over 120 +0.028-0.01 0-0.0 +0.00 0 Thru 180 +0.00-0.09-0.0-0.08 0-0.02

Dyna Series 7 90 11 10 190 mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) D1 max 1-stage* 21 (0.827) 28 (1.102) (1.78) (1.9) (2.1) (2.1) input shaft diameter D1 max 2-stage* 1 (0.1) 1 (0.1) 2 (0.9) 2 (0.9) 8 (1.9) 8 (1.9) D g pilot diameter 89 (.0) 10 (.1) 12 (.921) 10 (.90) 19 (7.77) 2 (9.) D8 mounting hole diameter. (0.2) 9 (0.) 11 (0.) 1 (0.1) 17. (0.89) 17. (0.89) D9 k gearbox input shaft dia 1 (0.1) 18 (0.709) 22 (0.8) 28 (1.102) 2 (1.2) 0 (1.7) f1 mounting hole thread M M8 M10 M12 M1 M1 housing width 0 (2.2) 80 (.1) 100 (.97) 120 (.72) 1 (.78) 19 (7.717) housing size 90 (.) 11 (.28) 10 (.12) 170 (.9) 21 (8.) 20 (10.2) L pilot height 1. (0.1) 8. (0.) 8 (0.1) 8 (0.1) 10 (0.9) 10 (0.9) 0 hypoid offset 9 (0.) 1 (0.1) 18 (0.709) 2 (0.90) 2 (1.2) 2 (1.) 1 flange thickness 8 (0.1) 10 (0.9) 11 (0.) 1 (0.12) 1 (0.91) 17 (0.9) 2 hole location 22 (0.8) 27 (1.0) (1.299) 0 (1.7) 2 (2.07) 70 (2.7) hole location 9 (1.) 9 (1.929) 9 (2.2) 72 (2.8) 91 (.8) 112 (.09) 181 (7.12) 219 (8.22) 20. (9.82) 28. (11.28). (1.11) 9 (17.28) 1-stage ** input length 229. (9.0) 22 (10.1) 27. (9.7) 280 (11.02) 72 (1.) 91 (2.28) 2-stage ** 7 input shaft length 20 (0.787) 2 (1.02) (1.9) 8 (1.89) (2.1) 2 (2.1) * for larger shaft diameters consult GAM ** depending on motor, length may vary DS-F & DS-H 7 90 11 10 190 mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) D H7 ** hollow bore 20 (0.787) 2 (0.98) 0 (1.181) 0 (1.7) (2.1) 70 (2.7) D f7 hollow outer diameter 2 (0.9) 0 (1.181) (1.17) 0 (1.99) 8 (2.77) 80 (.1) D flange bolt circle 0 (1.7) 0 (1.99) (2.8) 80 (.1) 100 (.97) 12 (.921) D7 H7 locating hole diameter (0.2) (0.2) (0.2) 8 (0.1) 8 (0.1) 10 (0.9) D11 h8 flange pilot (OD) 0 (1.99) (2.8) 80 (.1) 100 (.97) 12 (.921) 10 (.299) D12 H7 flange pilot (ID) 2 (0.98) 1. (1.2) 0 (1.7) 0 (1.99) (2.8) 80 (.1) f2 flange tapped holes 7 x Mx9 7 x Mx9 7 x Mx9 11 x M8x12 11 x M8x12 11 x M10x1 L hollow hub length 7 (2.87) 81 (.189) 9 (.7) 109 (.291) 129 (.079) 11 (.9) L hub length 20 (0.787) 22 (0.8) 2 (1.02) 29 (1.12) 2 (1.2) (1.9) L7 shoulder + hub length 2 (0.90) 2 (0.98) 29 (1.12) (1.299) 7 (1.7) 0 (1.7) 8 shoulder height 1. (0.09) 1. (0.09) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) 9 inner flange pilot depth. (0.2). (0.2). (0.2) 8. (0.) 8. (0.) 10. (0.1) 0 outer flange pilot height. (0.2). (0.2). (0.2) 8. (0.) 8. (0.) 8. (0.) 1 pilot height 20 (0.787) 1. (0.1) 17 (0.9) 20 (0.787) 17. (0.89) 22. (0.88) W1 hole angle 1 0 0 0 W2 hole angle 2 0 0 0 * for larger shaft diameters, consult GAM ** mating shaft should have h tolerance *** depending on motor, length may vary DS-W & DS-T 7 90 11 10 190 mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) D2 k output shaft diameter 20 (0.787) 2 (0.9) 2 (1.2) 0 (1.7) (2.1) 70 (2.7) f shaft thread per DIN2/1 Mx1 M8x19 M12x28 M1x M20x2 M20x2 L output shaft length 0 (1.99) 0 (1.99) 0 (2.2) 70 (2.7) 102 (.01) 122 (.80) L8 usable shaft length (1.78) 0 (1.7) 0 (1.99) 0 (2.2) 90 (.) 110 (.1) L9 shoulder height 1. (0.09) 1. (0.09) 2 (0.079) 2 (0.079) 2 (0.079) 2 (0.079) gearbox width 12. (.82) 18. (.) 18 (.1) 198 (7.79) 28 (10.17) 28 (12.91) gearbox width 10 (.299) 180 (7.087) 220 (8.1) 20 (10.2) 0 (1.78) 0 (17.2) Toll Free Phone * for larger (877) shaft SERVO98 diameters consult GAM ** depending on motor, length may vary www.electromate.com

High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page provides a list of commonly requested modifications to give you a feel for our capabilities. Now there s a right-angle gearbox that has the performance and price point of a precision inline gearbox. Our redesigned Dyna-Lite Series use hypoid gearing that combines the space and configuration advantages of worm gearing with the high efficiency of bevel gearing. It is drop-in replacement for many right-angle and in-line planetary gear reducers. Dyna-Lite Series benefits include: High efficiency 9% Standard backlash < arcmin Back drivable High radial loading Available in shaft output and hollow output 2 1 1. Adapter Plate (Allows for quick and easy motor mounting) 2. Bearings (Taper roller bearings allows high radial loading of output shaft) www.electromate.com. Bellows Coupling (Bellows coupling for quick motor mounting). Hypoid Gearing (Optimized gearing allows ratios up to 1:1 in a single stage; 10:1 in two stages)

High Performance: Dyna-Lite Series DL-DW DL-DW Single output shaft configuration with our high performance bellow coupling Input and housing to mount to any servo motor Ratios up to 1:1 in a single stage and 10:1 in two stages Frame sizes:, 7 and 90 mm Drop-in for our highest precision Dyna Series DL-DW High Ratio (High Ratio available on all versions) DL-DH Smooth hollow output shaft configuration (includes shrink disc) Input and housing to mount to any servo motor Ratios up to 1:1 in a single stage and 10:1 in two stages Frame sizes:, 7 and 90 mm Drop-in for our highest precision Dyna Series DL-DH DL-PW DL-PW Single output shaft configuration with our high performance bellow coupling Input and housing to mount to any servo motor Ratios up to 1:1 in a single stage and 10:1 in two stages Frame sizes:, 7 and 90 mm Drop-in for many right-angle and in-line planetary gear reducers Rotation direction is opposite for DW and PW models. DL-PH (Available upon request) www.electromate.com DL-PH (Contact GAM for availability) Smooth hollow output shaft configuration (includes shrink disc)

Dyna-Lite Series - DL-D Dyna-Lite Series 7 90 Stock Ratios, 10, 2, 0, 100, 10 All Ratios Available* Nominal Output Torque (T 2n ) Max Acceleration Output Torque (T 2B ) Emergency Output Torque (T 2not ) Nominal Input Speed (n 1n ) Nm (lb-in) Nm (lb-in) Nm (lb-in) RPM 1-stage:, 10, 1 2-stage: 2, 0, 100, 10* For other ratios, consult GAM. :1, 10:1, 2:1, 0:1, 100:1 (10) 70 (20) 10 (129) 1:1, 10:1 2 (221) 0 () 90 (797) :1, 10:1, 2:1, 0:1, 100:1 (9) 10 (929) 210 (189) 1:1, 10:1 8 () 7 () 1 (12) :1, 10:1, 2:1, 0:1, 100:1 70 (20) 10 (129) 280 (278) 1:1, 10:1 0 () 100 (88) 190 (182) :1 700 100 2700 10:1, 1:1 200 00 000 2-stage 00 000 000 Max Input Speed (n 1max ) RPM 000 000 000 Standard Output Backlash (j) arcmin 1-stage < 7 < 7 < 2-stage < 9 < 9 < 8 Allowable Radial Load (F rad ) 1) N (lbs) 00 (7) 900 (110) 7200 (120) Allowable Axial Load (F axial ) N (lbs) 10 (71) 20 (1) 00 (810) Torsional Stiffness (C t21 ) (m) Noise Level (L PA ) Nm/arcmin 1..0 10.0 (lb-in/arcmin) (1.28) (.0) (88.1) kg (lbs) db(a) (J 1 ) kg cm 2 (lb-in 2 ) 1-stage 2. (.7). (9.9) 9 (19.8) 2-stage. (7.9).8 (1) 1.8 (2.) 1-stage < < < 8 2-stage < 9 < 70 < 72 :1 0. (0.1) 1.0 (0.). (1.22) 10:1, 1:1 0. (0.119) 0.8 (0.28) 2.9 (0.98) 2:1 0.17 (0.08) 0. (0.1) 1. (0.1) 0:1, 100:1 0.1 (0.08) 0. (0.11) 1.1 (0.7) Efficiency at Load,10: 9% 1: 9% 2,0,100,10: 87% Service Life Lubrication >1000 hours Life Time Lubrication Protection Rating IP Operating Temperature Range 1) Load applied at center of output shaft @100 RPM * other ratios available -10 C to 100 C (1 F to 212 F) 7 www.electromate.com

Ø D L8 Ø D L9 f2 L L 0 L Ø D g L7 Ø D2 k L Ø D H7 Ø D H7 Ø D7 DL-DW DL-DH Ø D1 DL - DW and DL - DH 7 90 mm (in) mm (in) mm (in) D1 max (1 stage)* motor shaft diameter 1 (0.) 20 (0.787) (1.78) D1 max (2 stage standard)* motor shaft diameter 1 (0.1) 19 (0.78) 19 (0.78) D1 max (2 stage available)* motor shaft diameter 1 (0.) 2 (0.9) 2 (0.9) D2 k output shaft diameter 20 (0.787) 2 (0.9) 2 (1.2) D g pilot diameter 89 (.0) 10 (.1) 12 (.921) D bolt circle 110. (.) 18. (.7) 1.8 (.7) D mounting holes. (0.2) 9 (0.) 11 (0.) D H7** hollow bore diameter 20 (0.787) 2 (0.98) 0 (1.181) D7 shrink disc OD (included) 0 (1.97) 0 (2.) 72 (2.8) 1-stage*** 17 (.89) 21. (8.0) 27 (10.118) gearbox length 2-stage*** 2 (9.291) 0. (11.99) (1.2) shaft length 0.0 (1.99) (2.1) 8 (2.77) L flange thickness 9 (0.) 11 (0.) 1 (0.1) L usable shaft length (1.78) 0 (1.7) 0 (1.99) L pilot height 1 (0.12) 1 (0.12) 1 (0.) L flange size 90 (.) 11 (.28) 10 (.12) L7 gear offset 9 (0.) 1 (0.1) 18 (0.709) L8 gearbox width 12 (.8) 12 (.91) 17 (.89) L9 shaft to centerline 87 (.2) 100 (.97) 12 (.91) 0 shrink disc to centerline. (2.9) 7. (2.89) 87 (.2) f2 shaft thread per DIN2/1 M x 1 M8 x 19 M12 x 28 * for larger motor shaft diameters, please contact GAM **mating shaft should have h tolerance ***depending on motor, length may vary Recommended Output Coupling (if necessary) metal bellows KLC-0 KLC-12 KM-270 elastomer EKC-80 EKC-110 EKM-00 TYPE CODES FOR DYNA-LITE SERIES (DL-D) Example: DL - DW - 07-00 H - [090-1A] - S111 Gearbox Series DL = Dyna-Lite Gearbox Style DW = shaft output DH = hollow output Gearbox Size 0, 07, 090 Ratio, 10, 1, 2, 0, 100 www.electromate.com Special Options Assigned by GAM Motor Mount Kit Assigned by GAM Options Available for This Product G = Keyed output shaft H = Smooth output shaft Tolerances (mm) Size k g H7 Over 18 +0.01-0.007 +0.021 Thru 0 +0.002-0.020 0 Over 0 +0.018-0.009 +0.02 Thru 0 +0.002-0.02 0 Over 0 +0.021-0.010 +0.00 Thru 80 +0.002-0.029 0 Over 80 +0.02-0.012 +0.0 Thru 120 +0.00-0.0 0 Over 120 +0.028-0.01 +0.00 Thru 180 +0.00-0.09 0 8

Dyna-Lite Series - DL-P Dyna-Lite Series 7 90 Stock Ratios, 10, 2, 0, 100, 10 All Ratios Available* Nominal Output Torque (T 2n ) Max Acceleration Output Torque (T 2B ) Emergency Output Torque (T 2not ) Nominal Input Speed (n 1n ) Nm (lb-in) Nm (lb-in) Nm (lb-in) RPM 1-stage:, 10, 1 2-stage: 2, 0, 100, 10* For other ratios, consult GAM. :1, 10:1, 2:1, 0:1, 100:1 (10) 70 (20) 10 (129) 1:1, 10:1 2 (221) 0 () 90 (797) :1, 10:1, 2:1, 0:1, 100:1 (9) 10 (929) 210 (189) 1:1, 10:1 8 () 7 () 1 (12) :1, 10:1, 2:1, 0:1, 100:1 70 (20) 10 (129) 280 (278) 1:1, 10:1 0 () 100 (88) 190 (182) :1 700 100 2700 10:1, 1:1 200 00 000 2-stage 00 000 000 Max Input Speed (n 1max ) RPM 000 000 000 Standard Output Backlash (j) arcmin 1-stage < 7 < 7 < 2-stage < 9 < 9 < 8 Allowable Radial Load (F rad ) 1) N (lbs) 2200 (9) 00 (911) 200 (19) Allowable Axial Load (F axial ) N (lbs) 1100 (28) 202 () 100 (98) Torsional Stiffness (C t21 ) (m) Noise Level (L PA ) Nm/arcmin 1..0 10.0 (lb-in/arcmin) (1.28) (.0) (88.1) kg (lbs) db(a) (J 1 ) kg cm 2 (lb-in 2 ) 1-stage 2. (.7). (9.9) 9 (19.8) 2-stage. (7.9).8 (1) 1.8 (2.) 1-stage < < < 8 2-stage < 9 < 70 < 72 :1 0. (0.1) 1.08 (0.7).7 (1.28) 10:1, 1:1 0. (0.119) 0.8 (0.28) 2.9 (0.98) 2:1 0.17 (0.08) 0. (0.1) 1. (0.1) 0:1, 100:1 0.1 (0.08) 0. (0.11) 1.1 (0.7) Efficiency at Load,10: 9% 1: 9% 2,0,100,10: 87% Service Life Lubrication >1000 hours Life Time Lubrication Protection Rating IP Operating Temperature Range 1) Load applied at center of output shaft @100 RPM * other ratios available -10 C to 100 C (1 F to 212 F) 9 www.electromate.com

Ø D 0 Ø I.M.P.A.C.T. D L f2 L Series - JPG-W L Ø D g 1 Ø D7 L7 Ø D2 k L Ø D H7 Ø D H7 DL-PW DL-PH Ø D1 L8 DL - PW and DL - PH 7 90 mm (in) mm (in) mm (in) D1 max (1 stage)* motor shaft diameter 1 (0.) 20 (0.787) (1.78) D1 max (2 stage standard)* motor shaft diameter 1 (0.1) 19 (0.78) 19 (0.78) D1 max (2 stage available)* motor shaft diameter 1 (0.) 2 (0.9) 2 (0.9) D2 k output shaft diameter 1 (0.) 22 (0.8) 2 (1.2) D g pilot diameter 0 (2.2) 70 (2.7) 90 (.) D bolt circle 8 (2.77) 8 (.) 120 (.72) D mounting holes. (0.217). (0.2) 9 (0.) D H7** hollow bore diameter 1 (0.91) 20 (0.787) 0 (1.181) D7 shrink disc OD (included) (1.72) 0 (1.99) 72 (2.8) 1-stage*** 172 (.772) 20 (8.11) 29. (9.82) gearbox length 2-stage*** 2 (9.291) 0. (11.99) (1.2) shaft length 8.0 (1.89) (2.20) 80 (.1) L flange thickness 8. (0.) 10 (0.9) 1 (0.12) L usable shaft length 28 (1.102) (1.17) 8 (2.28) L pilot height 18 (0.709) 18 (0.709) 20 (0.787) L flange size (2.98) 7 (2.992) 101 (.97) L7 gear offset 9 (0.) 1 (0.1) 18 (0.709) L8 gearbox width 11. (.71) 1 (.) 21 (8.0) 0 shaft to centerline 9 (.70) 110 (.1) 18 (.827) 1 shrink disc to centerline estimated 70 (2.7) estimated 8 (.8) estimated 108 (.22) F2 shaft thread per DIN2/1 M x 1 M8 x 19 M12x28 * for larger motor shaft diameters, please contact GAM **mating shaft should have h tolerance ***depending on motor, length may vary Recommended Output Coupling (if necessary) metal bellows KLC-0 KLC-12 KM-270 elastomer EKC-80 EKC-110 EKM-00 TYPE CODES FOR DYNA-LITE SERIES (DL-P) Example: DL - PW - 07-00 H - [090-1A] - S111 Gearbox Series DL = Dyna-Lite Gearbox Style PW = shaft output PH = hollow output Gearbox Size 0, 07, 090 Ratio, 10, 1, 2, 0, 100 www.electromate.com Special Options Assigned by GAM Motor Mount Kit Assigned by GAM Options Available for This Product G = Keyed output shaft H = Smooth output shaft Tolerances (mm) Size k g H7 Over 18 +0.01-0.007 +0.021 Thru 0 +0.002-0.020 0 Over 0 +0.018-0.009 +0.02 Thru 0 +0.002-0.02 0 Over 0 +0.021-0.010 +0.00 Thru 80 +0.002-0.029 0 Over 80 +0.02-0.012 +0.0 Thru 120 +0.00-0.0 0 Over 120 +0.028-0.01 +0.00 Thru 180 +0.00-0.09 0 0

Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications to give you a feel for our capabilities. GAM Spiral Bevel Gearboxes When you need a spiral bevel gearbox that you can count on, choose GAM. Our spiral bevel gearboxes are highly configurable, reliable, and economical right angle solutions designed for use in a wide range of applications. Precision cut spiral bevel gears are hardened and then lapped in pairs for ideal tooth contact and torque transmission, enabling 9-98% efficiencies and backlash between 10 and 0 arcmin (Reduced backlash versions available). Offered in 11 frame sizes, they can be constructed with a multitude of shaft configurations, and oriented in any direction to easily incorporate into your machine design. VC spiral bevel series shown with integrated motor mount. High efficiencies 9-98% Lubricated for life with synthetic oil 1 Includes motor mount 2 1 www.electromate.com 1. Housing Sturdy cast iron housing (Aluminum in size mm and mm) - all sides can be used for mounting 2. Bearings Deep groove ball bearings handle axial and radial loading. (Reinforced and taper roller options available). Spiral Bevel Gearing Precision cut, hardened, and lapped in pairs for ideal tooth contact. Mathematically precise ratios from 1:1 to :1. Input Available with shaft input or integrated motor adapter and coupling to easily mount to any IEC, NEMA, or servo motor. Output Solid shaft with key or keyed hollow shaft are standard. (Smooth shaft or shrink disc clamping available). Seals Lubricated for life and protected with high quality NBR seals. (Viton and FPM seals available)

V-Series, L-Series, VC-Series, LL-Series Shaft Input V-C0 Available Models L-C0 V-Series (mm to 0mm) L-Series ( mini mm & mm) Integrated Motor Mount Input VC-W VC-W VC-W VC-T VC-T Single Single Output Shaft VC-W Available Output Shaft Models VC-T VC-W VC-T Single Output Shaft Single Output Shaft VC-W Dual Output Dual Output Shaft Shaft Dual Output Shaft Dual Output Shaft VC-T Single Output Shaft Dual Output Shaft VC-S VC-S VC-S VC-S Smooth Hollow Output Shaft Smooth Hollow Output Shaft VC-K VC-K VC-K VC-K VC-K Smooth Smooth Hollow Hollow Output Output Shaft Shaft Keyed Keyed Hollow Hollow Output Output Shaft Shaft Keyed Hollow Output Shaft Keyed Hollow Output Shaft LL-W VC-Series (mm to 200mm) Smooth hollow output with zero backlash shrink disc Keyed hollow output www.electromate.com LL-Series ( mini mm & mm) 2

L8 f V Series & L Series ØD f7 ØD f7 ØD f2 L7 ØD2 j ØD f7 ØD f7 ØD L L L L8 f f f1 2 ØD1j ØD12 ØD1 f7 ØD B0 C0 G0 H0 f2 L7 ØD2 j ØD f7 0 9 1 1 L D0 J0 ØD1j f f1 ØD12 ØD1 f7 ØD f7 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0, C0, D0, G0, H0, J0 Dimension 2 Model L-Series V-Series 0 0 0 090 120 Description mm mm mm mm mm D Bolt Circle 29 9 7 100 0 D f7 Small Pilot Diameter 22 2 0 80 D f7 Pilot Diameter 89 119 9 1 f2 Housing Thread Mx8 Mx8 Mx12 M8x1 M10x1 1 L Housing Size 90 120 Housing Bolt Location 2 0 70 100 9 Centerline to Input Pilot 2 0. 2 7 - Ratio 1:1 1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1 - :1 :1 :1 :1 :1 :1 :1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 D1 j Input Shaft Diameter 10 10 10-12 12 - - 18 12 12 12 2 20 20 1 - Input Shaft Key Width 2 - - - 8 - Input Shaft Key Length 10 18 18 18-20 20 - - 28 28 28 28 28 - Input Shaft Key Height 0.9 1.2 1.2 1.2-1. 1. 2. 1. 1. 1. 2. 2. 2 D12 Input Step Diameter 10 1 1 1-17 17 - - 2 20 20 20 0 2 2 20 D1 f7 Input Hub Pilot Diameter 22 2 2 2 - - - 0 0 0 0 80 80 80 70 f Input Shaft Thread (DIN 2) M M M M - M M - - M M M M M10 M M M L Centerline to End of Input Shaft 9 78 78 78-100 100 - - 122 122 12 12 12 12 172 12 0 Input Shaft Length 1 2 2 2-2 2 - - 1 Centerline to Input Hub - 72 72 - - 8 8 9 9 11 11 12 12 D2 j Output Shaft Diameter 10 12 18 2 - Output Shaft Key Width 2 8 - Output Shaft Key Length 10 18 20 28 - Output Shaft Key Height 0.9 1.2 1. 2. D Output Step Diameter 10 1 17 0 f1 Output Flange Thread Mx Mx8 Mx9. M8x10 M10x12 f Output Shaft Thread (DIN 2) M M M M M10 L Output Shaft to Centerline 0 7. 72 9 122 L Pilot Height. 8 9. 10 12 L7 Small Pilot Height 1. 2 2 2 L8 Output Shaft Length 1 2 2 D2 j Output Shaft Diameter 10 12 18 2 - Output Shaft Key Width 2 8 - Output Shaft Key Length 10 18 20 28 - Output Shaft Key Height 0.9 1.2 1. 2. D Output Step Diameter 10 1 17 0 0 D1 f7 Output Hub Pilot Diameter 22 2 0 80 f1 Output Flange Thread Mx Mx8 Mx9. M8x10 M10x1 f Output Shaft Thread (DIN 2) M M M M M10 L Output Shaft to Centerline 9 78 100 122 12 L Pilot Height. 8 9. 10 1 L8 Output Shaft Length 1 2 2 www.electromate.com Applies to models A0, F0, M0 ØD

L8 f ØD f7 ØD f7 ØD ØD1 f7 f2 ØD2 j L f ØD1j ØD12 A0 ØD f7 L L ØD f7 f2 L8 ØD2 j f ØD ØD1 f7 ØD f7 0 f1 2 9 1 1 L ØD1 f7 ØD F0 M0 ØD1j f f1 ØD12 ØD1 f7 ØD f7 Major Dimensions (Applies to allmodels) Input Dimensions that change based on ratio Applies to models B0, C0, D0, G0, H0, J0 Applies to models A0, F0, M0 2 V-Series Dimension 10 10 200 20 20 0 mm mm mm mm mm mm D 11 1 17 200 20 0* D 0f7 90 110 120 10 10 20 D f7 1 19 199 22 2 9 1 f2 1 M10x20 M12x2 M12x2 M1x20 M1x2 M20x2** L 10 10 200 20 20 0 110 120 10 180 220 28 9 8 9 120 1 10 198-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1 - :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 D1 j 2 28 2 2 28 2 2 2 28 0 0 0 80-10 8 8 8 10 8 8 8 12 10 10 8 1 12 12 10 18 1 1 1 22 18 18 1-0 0 0 0 70 80 70 70 100 80 80 80 10 12 12 90-2.... D12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 90 72 D1 f7 90 90 8 8 110 100 100 100 120 120 120 110 10 10 10 10 10 10 10 10 20 20 20 20 f M12 M10 M8 M8 M12 M10 M8 M8 M1 M12 M12 M10 M20 M1 M1 M1 M20 M1 M1 M1 M20 M20 M20 M20 L 180 180 19 19 212 212 22 22 27 21 21 21 0 10 10 00 80 0 0 0 70 0 0 10 0 0 0 0 0 0 0 0 0 80 8 8 8 90 80 80 70 110 90 90 90 170 10 10 110 1 128 128 1 1 10 10 170 170 190 190 190 190 21 228 228 228 2 2 2 2 9 9 9 9 D2 j 2 2 0 80-10 10 12 1 18 22-0 70 80 100 10 - D 0 0 0 90 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 f M12 M12 M1 M20 M20 M20 L 17 10 20 20 28 10 L 12 1 17 17 20 0 L7 20 ØD L8 0 0 80 90 110 170 D2 j 2 2 0 80-10 10 12 1 18 22-0 70 80 100 10 - D 0 0 0 90 D1 f7 90 110 120 10 10 20 f1 M10x1 M12x1 M12x20 M1x20 M1x20 - f M12 M12 M1 M20 M20 M20 L 180 212 27 0 80 70 L 1 1 20 20 20 2 L8 0 0 80 90 110 170 Toll *Does Free not Fax apply (877) to A0, SERV099 F0, M0 www.electromate.com **All sides of the housing

L L V Series & L Series ØD f7 ØD f7 ØD1 f2 L7 ØD1 j E0 L L f f1 ØD12 ØD1 f7 ØD f7 ØD f7 ØD1 2 ØD K0 f2 L7 ØD f7 0 9 1 1 L 7 ØD11 H7 ØD1 j f f1 ØD12 ØD1 f7 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models E0 and K0 Applies to models E0/HSD, K0/HSD Model 2 L-Series V-Series Dimension 0 0 0 090 120 Description mm mm mm mm mm D Bolt Circle 29 9 7 100 D f7 0Small Pilot Diameter 22 ØD11 H7 2 0 80 D f7 Pilot Diameter 89 119 9 1 f2 Housing Thread Mx8 Mx8 Mx12 M8x1 M10x1 1 Housing L Size 90 120 Housing Bolt Location 2 0 70 100 9 Centerline to Input Pilot 2 0. 2 7 - Ratio 1:1 1:1-2:1 :1 :1 :1 - :1 1:1-1:1 - :1-1:1 - :1 - :1 :1 :1 - :1 :1 :1 :1 :1 2:1 2:1 :1 2:1 :1 D1 j Input Shaft Diameter 10 10 10-12 12 - - 18 12 12 12 2 20 20 1 - Input Shaft Key Width 2 - - - 8 - Input Shaft Key Length 10 18 18 18-20 20 - - 28 28 28 28 28 - Input Shaft Key Height 0.9 1.2 1.2 1.2-1. 1. 2. 1. 1. 1. 2. 2. 2 D12 Input Step Diameter 10 1 1 1-17 17 - - 2 20 20 20 0 2 2 20 D1 f7 Input Hub Pilot Diameter 22 2 2 2 - - - 0 0 0 0 80 80 80 70 f Input Shaft Thread (DIN 2) M M M M - M M - - M M M M M10 M M M L Centerline to End of Input Shaft 9 78 78 78-100 100 - - 122 122 12 12 12 12 172 12 0 Input Shaft Length 1 2 2 2-2 2 - - 1 Centerline to Input Hub - 72 72 - - 8 8 9 9 11 11 12 12 D11 H7 Hollow Shaft Diameter 10 12 18 2 D1 Extended Shaft Diameter 10 1 20 0 0 f1 Output Flange Thread Mx Mx8 Mx9. M8x10 Special M10x12 L Pilot Height. 8 9. 10 12 L7 Small Pilot Height 1. 2 2 2 Hollow Shaft to Centerline 2.. 2 80 JS9 Hollow Shaft Key Width 2 8 7 Hollow Shaft Height with Keyway 7 11. 1.8 20.8 28. D7 H *** Smooth Hollow Shaft Diameter 1 - - 12 18 2 D8 Opened up inner Diameter - - 1 19 2 D9 H7 **** Smooth Hollow Shaft Diameter 2 - - 1 20 27 D10 Shrink Disc OD - - 8 0 0 D1 Extended Shaft Diameter - - 20 0 0 f1 Output Flange Thread - - Mx9. M8x10 M10x12 L Pilot Height - - 9. 10 12 L7 Small Pilot Height - - 2 2 2 Stub Shaft Length - - 1 18 22 Hollow Bore 1 Depth 1 - - 2 28 2 Hollow Shaft to Centerline - - 2 80 Shrink Disc to Centerline - - 87 107 ØD f7 Toll Free ***Mating Phone shaft (877) should SERVO98 have j tolerance Toll ****Mating Free Fax shaft (877) should SERV099 have h tolerance www.electromate.com ØD 7

L L SHAFT DETAIL Ø D8 2 ØD f7 ØD f7 ØD1 Ø D10 ØD f7 ØD f7 L L L L ØD1 SHAFT DETAIL Ø D8 2 f2 L7 ØD1 j Ø D10 Ø D9 H7 E0/HSD Ø D7 H ØD f7 ØD f7 f2 L7 f2 L7 ØD1 j f ØD12 ØD1 f7 f1 ØD1 j f 2 ØD12 ØD ØD1 f7 Ø D9 H7 ØD f7 0 Ø D7 H f f1 2 9 1 1 L ØD12 ØD1 f7 ØD K0/HSD Special ØD f7 Major Dimensions (Applies to allmodels) Input Dimensions that change based on ratio Applies to models E0 and K0 Applies to models E0/HSD, K0/HSD V-Series Dimension 0 10 10 200 20 20 0 mm mm mm mm mm mm D 9 11 1 1 17 200 20 0* 1 D f7 90 110 120 10 10 20 L D f7 1 19 199 22 2 f2 M10x20 M12x2 M12x2 M1x20 M1x2 M20x2** 10 10 200 20 20 0 110 120 10 180 220 28 9 8 9 120 1 10 198-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1-1:1 - :1 - :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 2:1 :1 D1 j 2 28 2 2 28 2 2 2 28 0 0 0 80-10 8 8 8 10 8 8 8 12 10 10 8 1 12 12 10 18 1 1 1 22 18 18 1-0 0 0 0 70 80 70 70 100 80 80 80 10 12 12 90-2.... D12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 90 72 D1 f7 90 90 8 8 110 100 100 100 120 120 120 110 10 10 10 10 10 10 10 10 20 20 20 20 f M12 M10 M8 M8 M12 M10 M8 M8 M1 M12 M12 M10 M20 M1 M1 M1 M20 M1 M1 M1 M20 M20 M20 M20 L 180 180 19 19 212 212 22 22 27 21 21 21 0 10 10 00 80 0 0 0 70 0 0 10 0 0 0 0 0 0 0 0 0 80 8 8 8 90 80 80 70 110 90 90 90 170 10 10 110 1 128 128 1 1 10 10 170 170 190 190 190 190 21 228 228 228 2 2 2 2 9 9 9 9 D11 H7 2 2 0 80 D1 0 70 80 80 10 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 L 12 1 17 17 20 0 L7 20 90 10 12 12. 10 20 JS9 10 10 12 1 18 22 7. 8.. 9.. 8. D7 H*** 2 2 0 80 D8 1 81 D9 H7**** 7 7 2 82 D10 80 80 100 18 18 170 D1 0 70 80 80 10 f1 M10x12 M12x1 M12x17 M1x17 M1x20 M20x0 L 12 1 17 17 20 0 L7 20 2 2 2 0 0 0 0 0 0 90 10 12 12. 10 20 122 1 12 182. 200 29 Toll Free *** Mating Phone shaft (877) should SERVO98 have j tolerance Toll **** Free Mating Fax (877) shaft should SERV099 have h tolerance www.electromate.com

V Series & L Series Model L-Series V-Series Size 0 0 0 090 120 Ratios Available 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratio Input Speed (RPM) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) 0. 0.02 9 0.0 18 0.1 0 0.28 10 0.72 20. 0.12 9 0.28 17 0.7 1.21 12.9 00 0.22 8 0.1 1 0.8 0 2.2 11. 1:1 70. 0.298 7. 0.0 1 1.07 7.0 10 8.1 1000. 0.8 7 0.772 12 1.2.7 92 10.1 100 0.9 0.992 11 1.82 2.29 82 1. 200 2. 0.. 1.19 10 2. 28 7.1 70 18.2 000 2 0.1 1.2 10.1 27 8.9 21.82 0 - - - - 18 0.07 0.1 11 0.1 20 - - - - 17 0.1 0 0.7 108 1.99 00 - - - - 1 0. 7 1. 10.8 1.:1 70 - - - - 1 0.72 1.9 9.18 1000 - - - - 12 0.88 2 2. 8.2 100 - - - - 11 1.21 29.2 78 8. 200 - - - - 10 1.7 2.9 11. 000 - - - - 10 2.2 2.1 1 1. 0 - - 7 0.019 18 0.0 7 0.1 107 0.29 20 - -. 0.09 17 0.2 0. 98 1. 00 - - 0.1 1 0.1 0.9 92 2. 2:1 70 - -.7 0.2 1 0. 2 1.2 8. 1000 - -. 0.0 12 0. 1 1.71 81. 100 - - 0.1 11 0.91 27 2.2 7.0 200 - -.7 0.28 10 1.2 2.17 1 8.07 000 - -. 0.7 10 1. 2.8 9.2 0 - -. 0.01 1 0.0 7 0.07 110 0.21 20 - - 0.0 1 0.12 0. 9 0.87 00 - -. 0.08 1 0.2 0. 90 1. :1 70 - -.2 0.11 12 0. 2 0.88 87 2. 1000 - - 0.17 12 0. 1 1.1 82.01 100 - -. 0.19 11 0.1 27 1.9 7.08 200 - -. 0. 10 0.88 2 2.12. 000 - - 0.1 10 1.1 2 2. 8.9 0 - -. 0.00 - - 7 0.0 90 0.12 20 - -. 0.01 - - 0.2 87 0. 00 - -.2 0.09 - - 0.7 8 1.1 :1 70 - -.2 0.087 - - 2 0. 82 1.9 1000 - - 0.11 - - 1 0.8 79 2.18 100 - -.7 0.1 - - 27 1.12 7.0 200 - -. 0.28 - - 2 1. 7. 000 - -. 0.289 - - 2 1.9 0.9 0 - - - - - - 7 0.0 9 0.1 20 - - - - - - 0.2 92 0.1 00 - - - - - - 0.7 89 0.98 :1 70 - - - - - - 2 0. 8 1.2 1000 - - - - - - 1 0.8 80 1.7 100 - - - - - - 27 0.89 72 2.8 200 - - - - - - 2 1.2. 000 - - - - - - 2 1.2 0.97 0 - - - - - - 0.0 0.0 20 - - - - - - 0 0.1 71 0. 00 - - - - - - 29 0.27 9 0. :1 70 - - - - - - 29 0. 8 0.9 1000 - - - - - - 29 0. 1.22 100 - - - - - - 27 0.7 1.7 200 - - - - - - 2 1.09 7 2. 000 - - - - - - 2 1.2 2.9 Standard Backlash arcmin All Ratios <1 <1 <20 <20 <20 Allowable Radial Loading* N Models B0, C0, Contact GAM Contact GAM 70 120 1900 Allowable Axial Loading N D0, G0, H0, J0 Contact GAM Contact GAM 7 2 90 Allowable Radial Loading* N Models E0, E0/ Contact GAM Contact GAM Contact GAM 120 2100 HSD, K0, K0/ Allowable Axial Loading N HSD Contact GAM Contact GAM Contact GAM 2 100 Allowable Radial Loading* N Models A0, M0, Contact GAM Contact GAM 0 700 110 F0, or input Allowable Axial Loading N shafts Contact GAM Contact GAM 22 0 7 Efficiency at Load 9-98% Service Life / Housing Material 10,000 hours / Aluminum 1,000 hours / Cast Iron Lubrication Synthetic Oil Synthetic Oil Toll Free *Load Phone applied (877) at the SERVO98 center of shaft @ 100RPM 7 www.electromate.com

Model V-Series Size 10 10 200 20 20 0 Ratios Available 1, 1., 2,,,, :1 Ratio Input Speed (RPM) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) 0 220 1.21 80 2.09 70.1 1270 7 170 9. 0 2.7 20 21.92 0 9. 710 19. 970 2.7 10 2. 0 9.2 00 208 11. 0 18.19 20.17 820.19 120 72.7 2820 1.1 1:1 70 19 1.2 10 2..88 7 0.7 1170 9.72 270 19.92 1000 18 20.28 290 1.9 10.21 0 71. 100 11.7 1910 210. 100 12 2.78 20 2.99 0 7. 0 87. 90 17.07 120 27.8 200 10 7.0 218 7.7 - - - - - - - - 000 120 9.8 - - - - - - - - - - 0 210 0.7 1.29 70 2.7 10.89 1700.18 00 1. 20 20.7 0.07 90 12.7 1120 20.7 190 27. 0 7.11 00 200 7. 1 11. 1 22.7 920.9 100 7.72 070 112. 1.:1 70 190 10.7 29 1.2 0 0.1 82.7 1170.8 20 11.2 1000 17 12.87 280 20.9 0 7.1 7.21 100 77.19 20 188. 100 1 17.08 22 27.78 7 8.17 72.2 90 10.71 1870 20.19 200 12 22.22 20.1 0.9 18 91. 900 18.72 - - 000 11 2.91 18 0.78 0 72.7 0 99.2 80 189.8 - - 0 200 0. 0.98 70 2.07 10. 10. 0 12.79 20 190 2.2 20.1 80 9.7 122 1.88 10 20.12 90.1 00 180.9 00 8.27 10 1.81 970 2.7 1280.27 0 9.2 2:1 70 1.8 280 11.7 0 22.2 890.79 1170 8. 10 129.7 1000 12 8.8 270 1.88 00 27. 820.19 100 7.87 2820 1.1 100 18 11.1 2 20.2 2.1 71 9.11 90 78. 220 200.0 200 111 1.8 19 2. 2.2 0 80.02 80 112. - - 000 100 1. 170 28.11 10 1.2 0 87. 810 1.92 - - 0 180 0. 0 0.7 90 1.29 870 1. 10 2. 20 7.79 20 177 1.2 280 2. 0.7 82 7.8 1220 11.1 70.2 00 17.2 20.79 00 11.0 7 1.07 1110 20. 20 9. :1 70 17. 20.89 80 1.98 700 19.29 100 28.9 290 81.29 1000 10.87 2 8.99 20.7 2. 990. 220 9.2 100 1 8.0 20 12.8 1 28.8 0 29.7 900 9. 2220 122. 200 10 11. 202 17.81 9.2 0 9.8 821 72.9 1820 10.8 000 110 12.12 190 20.9 20.29 00.09 780 8.97 - - 0 170 0.2 280 0.9 80 0.8 980 1. 120 1.82 00.17 20 12 1.12 270 1.8 0.79 870.99 120 8.1 2820 19. 00 1 2.12 20.8 2 7.2 79 10.9 1180 1.2 220.72 :1 70 18.0 20.17 10 10. 7 1.19 1100 22.7 220 7.9 1000 1.7 20.1 8 1. 7 18. 100 28.9 2110 8.1 100 120.9 220 9.09 18.81 00 2.8 900 7.2 1910 78.9 200 111 7. 200 1.2 00 2. 9 2.7 780 1.8 1720 11.7 000 10 8.1 180 1.88 0 28.9 0.7 700 7.87 - - 0 10 0.17 290 0.2 2 0.8 990 1.09 10 1.7 20. 20 1 0.79 270 1.9 0 2.78 920.07 1290 7.11 2920 1.09 00 1 1. 20 2.7 70.18 80 9.1 1200 1.2 220 2.7 :1 70 10 2.1 20.97 0 7.27 770 12.7 1100 18.19 2170.88 1000 12 2.7 22.9 20 9.2 71 1.7 990 21.82 1920 2. 100 11.8 21 7.11 80 12.7 21 880 29.1 1710. 200 10. 198 10.8 0 17.99 0 29.1 70 0.21 190 78.8 000 100.1 180 11.9 00 19.8 10.7 700.29 - - 0 120 0.11 197 0.18 0 0.28 2 0.7 91 0.87 2120 1.9 20 121 0. 199 0.92 11 1. 10 2.82 90. 2020 9.28 00 119 1.09 187 1.72 0 2.79 90.2 878 8.0 1820 1.72 :1 70 117 1.1 17 2. 289.98 7.78 792 10.91 170 2.2 1000 112 2.0 1.01 28.7 0 9.92 702 12.9 1710 1.1 100 107 2.9 1.9 27. 90 1. 9 1. 110 1.1 200 10.8 1.98 218 9. 10 18.08 2 2.12 1290.88 000 9.18 129 7.09 208 11. 20.17 9 27.27 - - arcmin All Ratios <20 <20 <20 <20 <20 <20 N Models B0, C0, 000 000 8000 1000 22000 200 N D0, G0, H0, J0 100 200 000 700 11000 17100 N Models E0, E0/ 000 00 9000 100 22000 200 HSD, K0, K0/ N HSD 100 20 00 770 11000 17100 N Models A0, M0, 1700 280 000 1120 1700 200 F0, or input N shafts 80 12 200 2 870 17100 Efficiency at Load 9-98% Service Life / Housing Material 10,000 hours / Aluminum 1,000 hours / Cast Iron Lubrication Synthetic Oil Synthetic Oil www.electromate.com 8

V Series & L Series Model Input Speed L-Series :1 - - - - - - 0.0.2 0.99 12. 9 www.electromate.com A0 B0 C0 D0 E0 E0/HSD V-Series 0 0 0 090 120 Size 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratios Avail. (g) (g) 1:1 Contact GAM 20 Contact GAM 10 0.888 2. 2.90.1 10.97 12. 1.:1 - - - - 0.20 2. 1.822.1.809 12. 2:1 - - Contact GAM 10 0.189 2. 1.17.1. 12. :1 - - Contact GAM 10 0.10 2. 0.888.1 2.19 12. :1 - - Contact GAM 10 - - 0.1.1 1.21 12. :1 - - - - - - 0.28.1 0.71 12. :1 - - - - - - 0.02.1 0.7 12. 1:1 Contact GAM 22 Contact GAM 00 0.21 2.2.. 1.022 12. 1.:1 - - 0.111 2.2 2.18. 7.1 12. 2:1 - - Contact GAM 00 0.20 2.2 1.2..977 12. :1 - - Contact GAM 00 0.1001 2.2 1.0..012 12. :1 - - Contact GAM 00 - - 0.07. 1.729 12. :1 - - - - - - 0.9. 1.09 12. :1 - - - - - - 0.02. 0.8982 12. 1:1 Contact GAM 22 Contact GAM 00 0.21 2.2.. 1.022 12. 1.:1 - - 0.111 2.2 2.18. 7.1 12. 2:1 - - Contact GAM 00 0.20 2.2 1.2..977 12. :1 - - Contact GAM 00 0.1001 2.2 1.0..012 12. :1 - - Contact GAM 00 - - 0.07. 1.729 12. :1 - - - - - - 0.9. 1.09 12. :1 - - - - - - 0.02. 0.8982 12. 1:1 Contact GAM 20 Contact GAM 0 0.0 2..827. 1.99 12. 1.:1 - - - - 0.1 2. 2.199. 7.72 12. 2:1 - - Contact GAM 0 0.2 2. 1.72..090 12. :1 - - Contact GAM 0 0.1012 2. 1.09..0 12. :1 - - Contact GAM 0 - - 0.2. 1.91 12. :1 - - - - - - 0.9. 1.0712 12. :1 - - - - - - 0.10. 0.90 12. 1:1 Contact GAM 210 Contact GAM 0 0.7 2.1.207 1.199 12 1.:1 - - - - 0. 2.1 2.172 7.99 12 2:1 - - Contact GAM 0 0.28 2.1 1.9.97 12 :1 - - Contact GAM 0 0.12 2.1 1.00.000 12 :1 - - Contact GAM 0 - - 0.2 1.1 12 :1 - - - - - - 0.892 1.00 12 :1 - - - - - - 0.7 0.892 12 1:1 - - - - 0.012 2.1.921.2 1.9812 12. 1.:1 - - - - 0.892 2.1 2..2 8.190 12. 2:1 - - - - 0.111 2.1 1.09.2.9 12. :1 - - - - 0.2782 2.1 1.109.2.1988 12. :1 - - - - - - 0.91.2 1.7778 12. :1 - - - - - - 0.10.2 1.12 12.

Model Input Speed A0 B0 C0 D0 E0 E0/HSD V-Series 10 10 200 20 20 0 Size 1, 1., 2,,,, :1 Ratios Avail. of Inertia of Inertia 1:1 2.270 19 29.710 28. 121.222 2 Contact GAM 79 81.2000 8 Contact GAM 29 1.:1 11.89 19 19.7 28. 7.90 2 Contact GAM 79 0.9 8 Contact GAM 29 2:1 8.72 19 12.89 28..09 2 Contact GAM 79 19.270 8 Contact GAM 29 :1. 19 8.91 28. 18.822 2 Contact GAM 79 8.08 8 Contact GAM 29 :1 1.82 19.8 28. 1.21 2 Contact GAM 79.778 8 Contact GAM 29 :1 19 2.27 28..170 2 Contact GAM 79 7.280 8 Contact GAM 29 :1 1.708 19 2.0901 28..881 2 Contact GAM 79 1.808 8 Contact GAM 29 1:1.099 18. 1.27 28 17.7000 8 Contact GAM 7 827.00 8 Contact GAM 280 1.:1 18.71 18. 2.02 28 10.829 8 Contact GAM 7 18.222 8 Contact GAM 280 2:1 12.278 18. 20.100 28 71.21 8 Contact GAM 7 281.0 8 Contact GAM 280 :1 7.97 18. 12.080 28.191 8 Contact GAM 7 117.2211 8 Contact GAM 280 :1 2.978 18. 8.198 28 22.7181 8 Contact GAM 7.8 8 Contact GAM 280 :1 2.211 18..887 28 12.8770 8 Contact GAM 7 0.01 8 Contact GAM 280 :1 1.82 18. 2.907 28 10.01 8 Contact GAM 7 0.709 8 Contact GAM 280 1:1.099 18. 1.27 28 17.7000 8 Contact GAM 7 827.00 8 Contact GAM 280 1.:1 18.71 18. 2.02 28 10.829 8 Contact GAM 7 18.222 8 Contact GAM 280 2:1 12.278 18. 20.100 28 71.21 8 Contact GAM 7 281.0 8 Contact GAM 280 :1 7.97 18. 12.080 28.191 8 Contact GAM 7 117.2211 8 Contact GAM 280 :1 2.978 18. 8.198 28 22.7181 8 Contact GAM 7.8 8 Contact GAM 280 :1 2.211 18..887 28 12.8770 8 Contact GAM 7 0.01 8 Contact GAM 280 :1 1.82 18. 2.907 28 10.01 8 Contact GAM 7 0.709 8 Contact GAM 280 1:1 7.081 19 2.820 28. 177.817 0 Contact GAM 78 81.800 88 Contact GAM 287 1.:1 19.1878 19 2.818 28. 10.98 0 Contact GAM 78 8. 88 Contact GAM 287 2:1 12.21 19 20.79 28. 72.008 0 Contact GAM 78 28.97 88 Contact GAM 287 :1 8.09 19 12.197 28..9 0 Contact GAM 78 2.27 88 Contact GAM 287 :1 2.792 19 8.81 28. 22.910 0 Contact GAM 78 7. 88 Contact GAM 287 :1 2.20 19.7299 28. 1.001 0 Contact GAM 78 0.900 88 Contact GAM 287 :1 1.898 19 2.99 28. 10.182 0 Contact GAM 78 1.102 88 Contact GAM 287 1:1 2.0 18.81 27 201.90 8 Contact GAM 71 828.900 82 Contact GAM 29 1.:1 17.220 18.11 27 109.027 8 Contact GAM 71 1.222 82 Contact GAM 29 2:1 11.19 18 20.8 27 7.1 8 Contact GAM 71 287.897 82 Contact GAM 29 :1 7.729 18 12.1 27.2209 8 Contact GAM 71 120.1100 82 Contact GAM 29 :1 2.80 18 8.11 27 2.88 8 Contact GAM 71 8.2888 82 Contact GAM 29 :1 2.079 18.7791 27 1.8070 8 Contact GAM 71 1.0 82 Contact GAM 29 :1 1.771 18.008 27 10.707 8 Contact GAM 71 1.21 82 Contact GAM 29 1:1 9.0 18.7 0.70 27. 222.12 9. Contact GAM 72 892.00 8.9 Contact GAM 2 1.:1 20.091 18.7.971 27. 118.707 9. Contact GAM 72 1.11 8.9 Contact GAM 2 2:1 1.0198 18.7 22.282 27. 81.89 9. Contact GAM 72 0.8100 8.9 Contact GAM 2 :1 8.282 18.7 1.00 27. 7.7 9. Contact GAM 72 127.1800 8.9 Contact GAM 2 :1 2.881 18.7 8.92 27. 2.72 9. Contact GAM 72 72.2 8.9 Contact GAM 2 :1 2.299 18.7.007 27. 1.79 9. Contact GAM 72.988 8.9 Contact GAM 2 :1 1.929 18.7.179 27. 11.291 9. Contact GAM 72.19 8.9 Contact GAM 2 www.electromate.com 70

V Series & L Series Model Input Speed L-Series V-Series 0 0 0 090 120 Size 1:1 1,2,,:1 1, 1., 2, :1 1, 1., 2,,,, :1 Ratios Avail. (g) (g) 1:1 Contact GAM 290 Contact GAM 700 0.82 2.7.88. 1.7 1 1.:1 - - 0.270 2.7 2.008. 7.177 1 2:1 - - Contact GAM 700 0.22 2.7 1...987 1 F0 :1 - - Contact GAM 700 0.122 2.7 1.00. 2.8991 1 :1 - - Contact GAM 700 - - 0.0. 1. 1 :1 - - - - - - 0.70. 0.91 1 :1 - - - - - - 0.18. 0.822 1 1:1 Contact GAM 28 Contact GAM 0 0.17 2..8.9 20.10 1.7 1.:1 - - - - 0. 2..098.9 9.922 1.7 2:1 - - Contact GAM 0 0.8 2. 2.1890.9 7.090 1.7 G0 :1 - - Contact GAM 0 0.1821 2. 1.7927.9.70 1.7 :1 - - Contact GAM 0 - - 0.78.9 2.12 1.7 :1 - - - - - - 0.9.9 1.009 1.7 :1 - - - - - - 0.20.9 1.290 1.7 1:1 Contact GAM 28 Contact GAM 0 0.17 2..8.9 20.10 1.7 1.:1 - - - - 0. 2..098.9 9.922 1.7 2:1 - - Contact GAM 0 0.8 2. 2.1890.9 7.090 1.7 H0 :1 - - Contact GAM 0 0.1821 2. 1.7927.9.70 1.7 :1 - - Contact GAM 0 - - 0.78.9 2.12 1.7 :1 - - - - - - 0.9.9 1.009 1.7 :1 - - - - - - 0.20.9 1.290 1.7 1:1 Contact GAM 290 Contact GAM 90 0.27 2.7.22 7 20.88 1.9 1.:1 - - - - 0.97 2.7.109 7 10.08 1.9 2:1 - - Contact GAM 90 0.708 2.7 2.191 7 7.8 1.9 J0 :1 - - Contact GAM 90 0.182 2.7 1.798 7.7780 1.9 :1 - - Contact GAM 90 - - 0.7 7 2.798 1.9 :1 - - - - - - 0.81 7 1.128 1.9 :1 - - - - - - 0.217 7 1.7 1.9 1:1 Contact GAM 270 Contact GAM 20 0.98 2..02. 20.27 1. 1.:1 - - - - 0.17 2..007. 9.900 1. 2:1 - - Contact GAM 20 0.20 2. 2.11. 7.2819 1. K0 :1 - - Contact GAM 20 0.2 2. 1.7812..70 1. :1 - - Contact GAM 20 - - 0.77. 2. 1. :1 - - - - - - 0.28. 1.9 1. :1 - - - - - - 0.180. 1.20 1. 1:1 - - - - 0.79 2..2008.7 22.200 1.7 1.:1 - - - - 0. 2..88.7 10.98 1.7 2:1 - - - - 0. 2. 2.07.7 7.7287 1.7 K0/HSD :1 - - - - 0.02 2. 1.87.7.91 1.7 :1 - - - - - - 0.7792.7 2.1 1.7 :1 - - - - - - 0.89.7 1.81 1.7 :1 - - - - - - 0.7.7 1.77 1.7 1:1 Contact GAM 290 Contact GAM 700 0.82 2.7.88. 1.7 1 1.:1 - - - - 0.98 2.7 2.97. 7.90 1 2:1 - - Contact GAM 700 0.192 2.7 1.97..9808 1 M0 :1 - - Contact GAM 700 0.18 2.7 1...08 1 :1 - - Contact GAM 700 - - 0.2. 2.107 1 :1 - - - - - - 0.98. 1.292 1 :1 - - - - - - 0.79. 1.207 1 71 www.electromate.com

Model Input Speed V-Series 10 10 200 20 20 0 Size 1, 1., 2,,,, :1 Ratios Avail. of Inertia kg cm²) of Inertia 1:1 9.00 2.0 181.878 0 Contact GAM 97 1221.000 10 Contact GAM 0 1.:1 17.90 2 2.209 8.00 0 Contact GAM 97 8.87 10 Contact GAM 0 2:1 11.99 2 1.078 1.1 0 Contact GAM 97 29.000 10 Contact GAM 0 F0 :1 7.899 2 10.000 2.8 0 Contact GAM 97 10.17 10 Contact GAM 0 :1 2.1 2 7.20 18.0 0 Contact GAM 97 72.217 10 Contact GAM 0 :1 2.07 2 2.87 8.721 0 Contact GAM 97.80 10 Contact GAM 0 :1 1.7 2 2.022 7.0721 0 Contact GAM 97.117 10 Contact GAM 0 1:1 9.229 22.7.882. 2.21 8 Contact GAM 100 12.00 109 Contact GAM 72 1.:1 2.7711 22.7.081. 1.0 8 Contact GAM 100 29.222 109 Contact GAM 72 2:1 17.71 22.7 28.20. 92.77 8 Contact GAM 100 7.80 109 Contact GAM 72 G0 :1 12.910 22.7 19.8..2891 8 Contact GAM 100 17.0711 109 Contact GAM 72 :1.7202 22.7 1.927..191 8 Contact GAM 100 87.998 109 Contact GAM 72 :1.2180 22.7.8. 1.990 8 Contact GAM 100 71.01 109 Contact GAM 72 :1 2.88 22.7.187. 1.7 8 Contact GAM 100 1.209 109 Contact GAM 72 1:1 9.229 22.7.882. 2.21 8 Contact GAM 100 12.00 109 Contact GAM 72 1.:1 2.7711 22.7.081. 1.0 8 Contact GAM 100 29.222 109 Contact GAM 72 2:1 17.71 22.7 28.20. 92.77 8 Contact GAM 100 7.80 109 Contact GAM 72 H0 :1 12.910 22.7 19.8..2891 8 Contact GAM 100 17.0711 109 Contact GAM 72 :1.7202 22.7 1.927..191 8 Contact GAM 100 87.998 109 Contact GAM 72 :1.2180 22.7.8. 1.990 8 Contact GAM 100 71.01 109 Contact GAM 72 :1 2.88 22.7.187. 1.7 8 Contact GAM 100 1.209 109 Contact GAM 72 1:1 0.210 2.2 7.17 28. 0 Contact GAM 102 128.900 112 Contact GAM 79 1.:1 2.207 2.2.2 1.718 0 Contact GAM 102 08. 112 Contact GAM 79 2:1 17.919 2.2 29.0079 9.8 0 Contact GAM 102 77.7 112 Contact GAM 79 J0 :1 1.002 2.2 19.979. 0 Contact GAM 102 92.117 112 Contact GAM 79 :1.781 2.2 1.9917.890 0 Contact GAM 102 88.89 112 Contact GAM 79 :1.27 2.2.098 1.72 0 Contact GAM 102 71.900 112 Contact GAM 79 :1 2.878 2.2.7 1.822 0 Contact GAM 102 1.02 112 Contact GAM 79 1:1.79 22.2 9.220 22.01 8 Contact GAM 9 12.7900 10 Contact GAM 1 1.:1 2.28 22.2.18 19.7777 8 Contact GAM 9 8.222 10 Contact GAM 1 2:1 1.8122 22.2 29.18 97.871 8 Contact GAM 9 80.97 10 Contact GAM 1 K0 :1 12.92 22.2 19.7 7.19 8 Contact GAM 9 19.900 10 Contact GAM 1 :1.0 22.2 1.087.88 8 Contact GAM 9 89.188 10 Contact GAM 1 :1.080 22.2.90 17.290 8 Contact GAM 9 72.0 10 Contact GAM 1 :1 2.71 22.2.828 1.11 8 Contact GAM 9 1.921 10 Contact GAM 1 1:1 2.1978 22.9.10. 28.08 9. Contact GAM 9 1299.00 108.9 Contact GAM 1.:1 2.0089 22.9 8.9809. 19.1208 9. Contact GAM 9.11 108.9 Contact GAM 2:1 18.12 22.9 0.8882. 102.82 9. Contact GAM 9 9.100 108.9 Contact GAM K0/HSD :1 1.20 22.9 20.. 9.27 9. Contact GAM 9 17.000 108.9 Contact GAM :1.90 22.9 1.18..18 9. Contact GAM 9 9.9 108.9 Contact GAM :1. 22.9.710. 18.99 9. Contact GAM 9 7.988 108.9 Contact GAM :1 2.909 22.9.87. 1.99 9. Contact GAM 9.9 108.9 Contact GAM 1:1 9.00 2.0 181.878 0 Contact GAM 97 1221.000 10 Contact GAM 0 1.:1 17.877 2 2.812 88.1 0 Contact GAM 97 0.9 10 Contact GAM 0 2:1 1.090 2 21.0089 7.2 0 Contact GAM 97 28.770 10 Contact GAM 0 M0 :1 11.119 2 1.28 0.9282 0 Contact GAM 97 12.9 10 Contact GAM 0 :1 2.8 2 11.92 2.711 0 Contact GAM 97 8.108 10 Contact GAM 0 :1 2.87 2.92 9.890 0 Contact GAM 97 8.280 10 Contact GAM 0 :1 2.78 2.781 9.0921 0 Contact GAM 97 2.08 10 Contact GAM 0 www.electromate.com 72