TUBE
TUBE TUBE family is available in 4 different sizes. They are protected from the ingress of dust and water and are used in both outdoor and indoor environments. Operating with PAR, Compact Fluorescent, Metal Halide lamps and available in high lumen output LED. TUBE can solve many lighting tasks in modern architectural surrounds and are widely used in illuminating columns and facades. The wall up/down light offers the user a personalized application; e.g. using one distribution type upward and another type downward. The body components are made from extruded and die-cast aluminium which make them highly corrosion resistant to any extreme environment. The version of the up and down wall light with single light source features separated control gear compartments which prolongs the operating lifetime. The bollard and pole light version gives a great level of downward light in respect to the lighting pollution issue. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles. Timed ignitor. High efficiency electronic control gear. High performance reflector. High power COB LED. Designed and tested at Ta 40 C Maxi version equipped with quick connector. Separated gear compartment. 122
TUBE Specification Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaires IEC 60598-2-2. Electrical protection class1/class2. Protection against dust and water IP65. Protection against mechanical impact IK10 on body and IK07 on optical part. High-pressure Die Cast Aluminium alloy body and components. Extruded Aluminium S6063 alloy body with low copper content. Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250 C. High performance anodized spun aluminium reflector. High performance metallized reflector from Ledil Finland / Khathod Italy. High efficiency engineering designed Deep-Draw forming reflector. Available in many beam angles. Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter. E27 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. G24d/ GX24d lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24q/ GX24q lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. B15d lampholder in ceramic and zinc-coated steel from Vossloh Schwabe or equivalents. VDE/ ENEC approved. GU6.5 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. GU10 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe/ BAG Electronics or equivalents. ENEC approved. Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved. Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents. ENEC approved. Low loss magnetic ballast for fluorescent lamp from BAG Electronics or equivalents. ENEC approved. Electronic ballast for fluorescent lamp from TCI/ Tridonic or equivalents. ENEC approved. Electronic ballast for HID lamp from TCI/ Tridonic or equivalents. ENEC approved. High efficiency LED module in COB technology from Citizen - Japan. Assembled on MCPCB and mounted on to heat conductive material. High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. Driver is integrated in the luminaire. The whole LED systems tested to be operated under maximum ambient environment up to +40 C. Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40 C to +180 C. HID control gear wired with double insulated silicone cable and com patible to be operated under ignition voltage up to 5KV. Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm 2. VDE approved. Maxi TUBE assembled with quick connector for cable with cross section up to 2.5mm 2 from ADELS or equivalents. VDE approved. Class1 luminaire provided with the earth connection. Installation work has to be carried on according to the enclosed installation manual. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06) Accessories Mini TUBE bollard Anchor bolt kit for foundation installation Ordering code: 9-2016-00 Maxi TUBE pole light Anchor bolt kit for foundation installation Ordering code: 9-2020-00 123
TUBE Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Up/Down Light Ordering Code : 5001-0-2-264-XX Lamp Type : PAR20 E27 2x50W Protection : IP65 Class1 Dimension Light Distribution Specification Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaires IEC 60598-2-2. Electrical protection class1/class2. Protection against dust and water IP65. Protection against mechanical impact IK10 on body and IK07 on optical part. Luminaire body housing made of high-pressure die cast aluminium ADC3 alloy and extruded aluminium S6063 alloy with low copper content. Corrosion resistance and suitable for outdoor use. Nano Ceramic surface conversion, resistant to corrosive environment. Double layer coating process: Luminiare primary coated with epoxy primer and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250 C. High performance anodized aluminium reflector. Available in many beam angles. Post-cured treated molded silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. External screws in 316 stainless steel with silicone grease dipping. Cable entry protected by weather proof PG11 EPDM grommet. Prepare for H05RN-F / H07RN-F cable diameter 7 10mm. E27 lamp holder in ceramic body with nickel-coated contact from Vossloh Schwabe. VDE approved. Terminal block in PA6.6 nickel plated brass insert 600V/24A VDE approved. Working temperature -40 C to +130 C. For cable with cross section up to 2.5mm 2. Wiring provided with earth connection in class1 luminaires. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06)
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Up/Down Light Ordering Code : 5001-5-3-901-XX Lamp Type : Protection : Dimension Light Distribution
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Downlight Ordering Code : 5004-7-3-901-XX Lamp Type : Protection : Dimension Light Distribution
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Downlight Ordering Code : 5004-6-3-901-XX Lamp Type : Protection : Dimension Light Distribution
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Downlight Ordering Code : 5004-5-3-901-XX Lamp Type : Protection : Dimension Light Distribution
TUBE Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Downlight Ordering Code : 5004-0-2-261-XX Lamp Type : PAR20 E27 50W Protection : IP65 Class1 Dimension Light Distribution Specification Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaires IEC 60598-2-2. Electrical protection class1/class2. Protection against dust and water IP65. Protection against mechanical impact IK10 on body and IK07 on optical part. Luminaire body housing made of high-pressure die cast aluminium ADC3 alloy and extruded aluminium S6063 alloy with low copper content. Corrosion resistance and suitable for outdoor use. Nano Ceramic surface conversion, resistant to corrosive environment. Double layer coating process: Luminiare primary coated with epoxy primer and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250 C. High performance anodized aluminium reflector. Available in many beam angles. Post-cured treated molded silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. External screws in 316 stainless steel with silicone grease dipping. Cable entry protected by weather proof PG11 EPDM grommet. Prepare for H05RN-F / H07RN-F cable diameter 7 10mm. E27 lamp holder in ceramic body with nickel-coated contact from Vossloh Schwabe. VDE approved. Terminal block in PA6.6 nickel plated brass insert 600V/24A VDE approved. Working temperature -40 C to +130 C. For cable with cross section up to 2.5mm 2. Wiring provided with earth connection in class1 luminaires. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06)
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Up/Down Light Ordering Code : 5001-7-3-901-XX Lamp Type : Protection : Dimension Light Distribution
Product Image Project Data Project : Location : Date : Note : Product Name : Mini TUBE Wall Up/Down Light Ordering Code : 5001-6-3-901-XX Lamp Type : Protection : Dimension Light Distribution