SK210LC-10 Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Specialist equipment is needed to use this machine in demolition work. Before using it please contact your KOBELCO dealer. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. 5-15, Kitashinagawa 5-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135 www.kobelco-kenki.co.jp/english_index.html Inquiries To: SK210LC-10-Latin America-EN-103-1803
Specifications Engine Travel System Working Ranges Unit: m Model Type No. of cylinders J05ETA-KSSE Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler 4 Travel motors Travel brakes Parking brakes Travel shoes 2 x axial-piston, two-step motors Hydraulic brake per motor Oil disc brake per motor 49each side Boom Range a- Max. digging reach Arm Short 2.4 m 9.42 5.65 m Standard 2.94 m 9.9 Long 3.5 m 10.34 a b h 11m 10 Bore and stroke 112 mm x 130 mm Travel speed 6.0/3.6 km/h b- Max. digging reach at ground level 9.24 9.73 10.17 9 Displacement Rated power output Max. torque 5.123 L 114 kw/2,000 min -1 (ISO 9249) 118 kw/2,000 min -1 (ISO 14396) 569 N m/1,600 min -1 (ISO 9249) 592 N m/1,600 min -1 (ISO 14396) Drawbar pulling force Gradeability 227 kn (ISO 7464) 70 % {35 } c- Max. digging depth d- Max. digging height e- Max. dumping clearance f- Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius 6.16 9.51 6.68 2.98 5.57 3.56 6.7 9.72 6.91 2.43 6.1 3.55 7.26 9.75 6.97 1.87 6.47 3.48 d e 8 7 6 5 4 3 Cab and Control i- Horizontal digging stroke at ground level j- Digging depth for 2.4 m (8') flat bottom 4.08 5.95 5.27 6.52 6.08 7.08 f 1 Pump Type Hydraulic System Max. discharge flow Two variable displacement pumps + one gear pump 2 x 220 L/min, 1 x 20 L/min Cab All-weather, sound-suppressed steel cab mounted on the high suspension mounts filled with silicone oil and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle Digging Force (ISO 6015) Arm length Bucket digging force Arm crowding force Short 2.4 m 143 157* 121 133* Standard 2.94 m 143 157* 102 112* Unit: kn Long 3.5 m 143 157* 91.8 101* *Power Boost engaged. c j g 12m 11 10 9 8 7 6 5 4 3 2 1 Short Arm Standard Arm Long Arm i 2 3 4 5 6 7 8m Relief valve setting Boom, arm and bucket Power Boost 34.3 MPa {350 f/cm 2 } 37.8 MPa {385 f/cm 2 } Dimensions Travel circuit Swing circuit Control circuit 34.3 MPa {350 f/cm 2 } 29.0 MPa {296 f/cm 2 } 5.0 MPa {50 f/cm 2 } Boom, Arm and Bucket Arm length Short 2.4 m Standard 2.94 m Long 3.5 m G G' Tail swing radius Distance from center of swing to rear end 2,910 2,900 Unit: mm Pilot control pump Gear type Boom cylinders 120 mm x 1,355 mm A Overall length 9,680 9,600 9,670 H Tumbler distance 3,660 Main control valve 8-spool Arm cylinder 135 mm x 1,558 mm B Overall height (to top of boom) 3,200 2,980 3,200 I Overall length of crawler 4,450 Oil cooler Air cooled type Bucket cylinder 120 mm x 1,080 mm C Overall width of crawler 2,990 J Track gauge 2,390 D Overall height (to top of cab) 3,010 K Shoe width 600 E Ground clearance of rear end* 1,060 L Overall width of upperstructure 2,710 F Ground clearance* 450 *Without including height of shoe A L Swing System Refilling Capacities and Lubrications G,G Swing motor Axial piston motor Fuel tank 320 L Brake Hydraulic; locking automatically when the swing control lever is in neutral position Cooling system Engine oil 18 L 20.5 L B D Parking brake Swing speed Tail swing radius Min. front swing radius Oil disc brake, hydraulic operated automatically 13.3 min -1 {rpm} 2,910 mm 3,550 mm Travel reduction gear Swing reduction gear Hydraulic oil tank 2 x 5.3 L 2.7 L 140 L tank oil level 244 L hydraulic system H I E K J C F Operating Weight and Ground Pressure In standard trim, with standard boom, 2.94 m arm, and 0.8 m 3 ISO heaped bucket Type Triple grouser shoes (even height) Shoe width mm 600 700 800 900 Overall width of crawler mm 2,990 3,090 3,180 3,290 Ground pressure kpa 44 38 34 31 Operating weight 21,100 21,500 21,800 22,100 15 16
Lifting Capacities Rating over front Rating over side or 360 degrees A: Reach from swing centerline to arm top B: Arm top height above/below ground C: Lifting capacities in Kilograms Bucket: Without bucket Relief valve setting: 37.8 MPa (385 f/cm 2 ) SK210LC A B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G.L. -1.5 m -3.0 m -4.5 m SK210LC A B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G.L. -1.5 m -3.0 m -4.5 m Boom: 5.65 m Arm: 2.94 m, Bucket: without Shoe: 600 mm HEAVY LIFT 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach Radius *6,720 *11,750 *6,720 *11,750 *6,360 *11,080 *14,740 *10,940 *6,360 *11,080 12,590 *10,940 *9,420 *11,110 11,120 11,020 *10,620 *8,020 7,330 6,760 6,460 6,370 6,450 6,700 *5,330 *5,920 *6,470 *7,330 7,230 7,020 6,930 6,980 5,250 5,240 5,050 4,770 4,500 4,310 4,240 4,280 5,430 5,300 5,150 5,050 5,020 3,520 3,400 3,270 3,170 3,150 *4,290 *3,970 *3,880 *3,960 *4,190 4,400 4,800 5,740 *6,030 *4,290 3,670 3,120 2,830 2,730 2,780 3,020 3,590 5,070 6.26 m 7.36 m 8.03 m 8.38 m 8.45 m 8.25 m 7.75 m 6.89 m 5.50 m Boom: 5.65 m Arm: 3.5 m, Bucket: without Shoe: 600 mm HEAVY LIFT 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach Radius *6,590 *10,510 *15,600 *6,590 *10,510 *15,600 *12,940 *7,260 *7,750 *10,980 *15,920 *12,780 *12,940 *7,260 *7,750 *10,980 12,310 12,680 *8,540 *10,450 11,130 10,930 10,950 *9,160 7,500 6,850 6,450 6,280 6,300 6,480 *5,890 *6,810 7,260 7,000 6,860 6,860 *6,470 5,120 4,820 4,520 4,290 4,160 4,160 4,320 *4,570 5,470 5,310 5,140 5,000 4,930 3,620 3,540 3,400 3,250 3,120 3,060 *3,670 *3,460 *3,430 *3,520 *3,740 4,020 4,330 5,040 *6,160 *3,670 3,310 2,840 2,590 2,490 2,520 2,700 3,140 4,180 6.84 m 7.86 m 8.49 m 8.82 m 8.89 m 8.70 m 8.22 m 7.42 m 6.16 m STANDARD EQUIPMENT ENGINE Engine, HINO J05ETA-KSSE, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 96Ah) Starting motor (24V - 5 kw), 60 amp alternator Engine oil pan drain cock Double element air cleaner Dustproof cap CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Heavy Lift and Power Boost without time limit SWING SYSTEM and TRAVEL SYSTEM Swing rebound prevention system Straight propel system Independent travel system Two-speed travel with automatic shift down Sealed and lubricated track links Grease-type track adjusters Automatic swing brake Lower track guards Lower under cover HYDRAULIC Arm regeneration system Auto warm up system Aluminum hydraulic oil cooler MIRRORS and LIGHTS Two rear view mirrors Three front working lights (2 for boom, one for right storage box) Two cab lights Swing flashers OPTIONAL EQUIPMENT Various optional arms Wide range of shoes Additional hydraulic circuit Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics. CAB and CONTROL ROPS Cab Two control levers, pilot-operated Tow eyes Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece floor mat Headrest Handrails Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor Automatic air conditioner Emergency escape hammer Suspension seat Radio, AM/FM stereo with speaker AUX and USB and Bluetooth KOMEX Travel alarm Refueling pump Rain visor (may interfere with bucket action) TOP guard Front-guard protective structures SK210LC A Boom: 5.65 m Arm: 2.4 m, Bucket: without Shoe: 600 mm HEAVY LIFT 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach B Radius 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G.L. -1.5 m -3.0 m -4.5 m *11,450 *13,220 *11,450 12,810 *8,310 *10,150 11,350 11,090 11,070 *9,930 *6,270 7,770 7,140 6,650 6,440 6,420 6,550 *6,270 *6,510 *6,970 7,460 7,190 7,020 6,980 7,100 5,140 4,970 4,710 4,470 4,320 4,280 4,390 5,360 5,270 5,150 5,070 3,460 3,370 3,260 3,200 *6,340 *5,770 5,330 4,850 4,700 4,840 5,370 *6,630 *5,740 5,760 4,140 3,440 3,100 2,990 3,060 3,380 4,150 *5,740 5.58 m 6.80 m 7.52 m 7.89 m 7.97 m 7.75 m 7.22 m 6.29 m 4.72 m Notes: 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Arm top defined as lift point. 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD. 17 18