Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 2LC/0LC-7A
02 Some of the photos may include optional equipment.
FORKLIFT Excellent Model NEW criteria of Forklift Hyundai introduces a new line of 7A series LPG forklift trucks. Excellent power and performance make your business more profitable. Lift Lock Tilt Lock Drive Lock OPSS (Operator Presence Sensing System) Control of mast tilting, lifting and lowering is not possible through operation of the appropriate control when the operator is not in the seated position 0
The new master on the job-site! Smooth running, efficient and ergonomically designed, 2LC/0LC-7A, 2GC/0GC-7A series are made to meet your needs. 9hp/ 2,00rpm Powerful Engine HMC L4KB(2.4L) Engine Market approved quality of HMC L4KB engine ensures incomparable performance, durability and additional value to the machine. Powerful and efficient engine provides excellent fuel economy and excellent torque for improved operation. (EPA/CARB Tier-IV Certified) Fast and Stable Performance Being able to quickly raise and lower the mast, as well as tilt it forward and backward, provides the best operational conditions during unloading. When the truck is fully loaded, mast lowering speed is carefully controlled to ensure safety by the down control valve. Mast, Lift and Tilt Lock System is standard. Lift cylinder Tilt cylinder Control valve Flow regulator Priority valve Hydraulic pump Brake (option) State-of-the-art Hydraulic System The latest large-capacity hydraulic system reacts quickly during operation, and a low-noise control valve increases both efficiency and durability. Steering unit Down safety valve Steering cylinder Tank Filter Fully Hydrostatic Power Steering A hydraulic steering system always guarantees smooth and flexible steering, preventing overrun and kick-back. 04
High Power & Performance High Power Low Noise Some of the photos may include optional equipment. Faster Travel Speed & Better Gradability The powerful high-output engine provides dynamic acceleration, untiring gradability and optimal travel speed on any tough terrains or slopes. Gradability(Loaded) 2LC-7A : 41.2% 0LC-7A : 4.2% Increased Mast Tilting Angle Utilizing the mast tilting angle of degrees forward and degrees backward, the operator can safely and rapidly perform loading and unloading jobs. Travel Speed(Unloaded) 2LC-7A : 9.9mph 0LC-7A : 9.9mph 0
Ergonomic operator friendly compartment design! A design based on human engineering relieves fatigue and increases operator s efficiency. Operator Friendly Gauges and Water-resistant Monitor Panel Full Suspension Seat An attractive and adjustable seat, based on a human engineering design, provides great comfort, safety and durability. New High Visibility for Safe Operation The operator is able to work with increased safety and accuracy due to a wider view mast. Ergonomically Positioned Pedals Based on human engineering, the accelerator, brake and inching pedals are optimally positioned for convenience while operating the equipment. Cup Holder & Console Box Additional storage spaces are located inside the operating space for operator s convenience. Quick Response of Operating Control Levers Only minimal operator s effort is required for precise, safe and productive control. 0
Comfortable Operation Travel Speed Control System In-Door : Customer Selection Out Door : Max Vehicle Travel Speed Some of the photos may include optional equipment. Adjustable Steering Wheel Steering wheel with horn button can be adjusted by a lever on the right-hand side for the most comfortable operator position. Easy and Safe Shift Lever A single lever on the left side of the steering column gives the operator fast, easy control of direction. The lever must be in the neutral position before the engine can be started. Secondary Horn Secondary Horn gives access to lights and horn 07
Danger-free through high durability! Safety and durability are priorities in design of the equipment. Strong Overhead Guard The safety overhead guard meets ISO 0 regulation and protects the operator during hazardous jobs. Parking brake Ratchet type parking brake requires less effort from the operator to set. Highly Durable Split Type Drive Axle The bevel gear set and hub reduction axle smoothly delivers desired torque to the drive wheels. 08 Large Footboard & Hand Grip Wide open step offers convenience and safety when entering and exiting truck. Expansion Bellows The expansion bellows absorbs vibration and reduces noise generated from the exhaust system and also extends the life cycle of exhaust system. Electrically Monitored Air Filter Air cleaner sensor alerts the operator of a restricted air filter and allows replacement before damage occurs.
Endurance & Safety Some of the photos may include optional equipment. 4. in Heavy Duty Single Unit Frame Heavy duty single unit type frame, designed on the basis of accurate structural analysis, guarantees durability and safety. Bright, Protected Headlights Bright, Protected head lights are positioned for exceptional visibility. Ground Clearance The engine and transmission are assembled horizontally and positioned high in the frame to protect major components during operation on rugged surface. 09
Designed for quick and easy service! An ideal arrangement of component parts ensures easy access and convenience for maintenance. Easy Change Air Cleaner The air filter is readily accessible for cleaning or replacement. (inch Cyclone Type) Fast Service Access for Daily Fluids Check Rotational Battery Installation One Touch, No Tool Floor Plate Removable Side Panels for Ease of Service Improvement in Maintenance of Electric Parts Various electric parts are centralized in dash board resulting in effortless troubleshooting. Easy Maintenance Oil Check The T/M oil level can be checked easily without any disassembly. Brake Fluid Reservoir With Level Switch When the brake oil level become lower than Min. level, the waning lamp on the clusters comes on. An Accessible, Compact Fuse Box for Easy Inspection
Durability Easy Maintenance Load Capacity w / o Integral Load Capacity w / Integral Truck Weight Tilt Free Lift (in) Maximum Overall Side Shift 24 in LC (lb) Side Shift 24 in LC (lb) Unload Angle Mast Type Fork Height (deg) With Backrest With / o Backrest Single Tire Single Tire Single Tire Height (in) Lowered (in) Mast Specification Fwd Bwd 2LC-7A 0LC-7A 2LC-7A 0LC-7A 2LC-7A 0LC-7A 2LC-7A 0LC-7A 2LC-7A 0LC-7A 2-Stage Limited Free Lift -Stage Full Free Lift 4-Stage Full Free Lift V209 V00 *V0 V0 V70 V400 V40 V40 V470 V00 TF70/TS70 TF400/TS400 TF40/TS40 TF40/TS40 TF470/TS470 TF00/TS00 TF0/TS0 TF00/TS00 QF QF0 QF700 QF74 QF790 82. 118.1 129.9 17.8 14.7 17.4 19. 177.2 18.0 19.9 14.7 17.4 19. 177.2 18.0 19.9 21. 2.2 240.7 20.4 27.2 29.9 11. 0.2 78.1 84.0 87.9 9.9 99.8.7 111. 11. 121.4 70. 74.2 78.2 82.1 84.1 87.9 9.9.7 8. 91. 9. 1.2 7.1 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 2.8 27.8 1.7. 7. 41. 49.4 7. 7.0 44.9 48.8 4.7 0. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 2.8 27.8 1.7. 7. 41. 49.4 7. 7.0 44.9 48.8 4.7 0. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 0. 4.2 8.1 0.1 4.1 71.9 79.8 9. 7.4 71. 77.2 8.1 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4.9 47.8 1.7.7 7. 1. 9.4 77. 7.0 4.9 8.9 74.8 80.7 000 000 000 000 000 000 000 490 480 4790 000 490 480 4790 4740 40 440 740 280 090 29 2270 140 000 000 000 000 000 000 000 890 840 70 000 890 780 70 20 40 80 80 480 00 2470 120 000 000 000 000 000 000 490 4900 4790 4740 000 4900 4790 4740 480 470 4400 740 170 2980 2800 2180 170 000 000 000 000 000 000 890 840 70 20 90 780 70 20 0 40 20 80 480 280 29 2290 14 8088 821 8274 811 80 842 827 889 821 89 80 879 818 87 897 874 881 8974 944 978 947 974 999 9148 99 97 98 971 971 9808 984 988 992 992 9980 0 01 078 127 211 4 470 00 8 770 990 * TS-Mast : Wide Visible Stage Full Free Lift Mast with 2 Free Lift Cylinders. Load Capacity 2LC-7A Weight lb, 4,4, 2,200 V0 MAST V40 MAST Weight lb, 4,4, 2,200 TF/TS00 MAST TF/TS400 MAST TF/TS00 MAST 1,0 1,0 19.7 27..4 4. 1.2 9.1 Load Center (in) 19.7 27..4 4. 1.2 9.1 Load Center (in) 0LC-7A Weight lb,, 4,4, 2,200 1,0 V0 MAST V40 MAST Weight lb,,,, 2,200 1,0 TF/TS00 MAST TF/TS400 MAST TF/TS00 MAST 19.7 27..4 4. 1.2 1,00 Load Center (in) 19.7 27..4 4. 1.2 9.1 Load Center (in) SIDE SHIFT INTEGRAL SIDE SHIFT FORK : in, 9 in, 47 in, in, 9 in, in, 71 in OVER SHOE : 1 in, 9 in, 7 in, 71 in Optional Items TILTING : / o, / o, / o (Bottler Tilt's) TIRE : Cushion, No-marking SEAT : Pocket, Arm Rest, Hip Rest, FG 2, 2 Grammer Seat LPG CLAMP : Swing Out, Swing Down M.C.V : 4-Spool ATTACH PIPING : Spool-piping, 4 Spool-piping MASTER SWITCH BEACON LAMP HAZARD SWITCH WORK LAMP SPEED CONTROL SENSOR 11
Dimension Specification h4 h h1 S 0 c Q h2 I I b1 Ast wa m1 x I1 m2 y I2 b12 e b1 h h7 h Identification 1.1 Manufacturer 1.2 Manufacturer s type designation 1. Drive: electric (battery or mains),diesel,petrol,fuel gas,manual 1.4 Type of operation:hand,pedestrian,standing,seated,order-picker 1. Load capacity / rated load Q (lb) 1. Load center distance c (in) 1.8 Load distance, center of drive axle to fork x (in) 1.9 Wheelbase y (in) Weights 2.1 Service weight lb 2.2 Axle loading, loaded front/rear lb 2. Axle loading, unloaded front/rear lb Wheels, Chassis.1 Tires:solid rubber, superplastic, pneumatic, polyurethane.2 Tires size, front( width x ) Φ). Tires size, rear( width x ) Φ). Wheels, number front x rear (x=driven wheels). Track width, front b (in).7 Track width, rear b11 (in) Basic Dimensions 4.1 Mast / fork carriage tilt forward / backward( α / β) ) 4.2 Lowered mast height 4. Free lift 4.4 Lift height 4. Extended mast height 4.7 Overhead load guard (cab) height 4.8 Seat height / standing height 4.12 Coupling height 4.19 Overall length 4.20 Length to face of forks 4.21 Overall width 4.22 Fork dimensions 4.2 Fork carriage ISO 228, class / type A,B 4.24 Fork-carriage width 4.1 Ground clearance, loaded, under mast 4.2 Ground clearance, centre of wheelbase 4. Aisle width for pallets 00x1200 crossways 4.4 Aisle width for pallets 800x1200 lengthways 4. Turning radius degrees h1 (in) h2 (in) h (in) h4 (in) h (in) h7 (in) h (in) l1 (in) l2 (in) b1 (in) s / e / l (in) b12 (in) m1 (in) m2 (in) Ast (in) Ast (in) Wa (in) 4. Smallest pivot point distance b1 (in) Performance Data.1 Travel speed, Unloaded mph.2 Lift speed, Loaded/Unloaded fpm. Lowering speed, Loaded/Unloaded fpm. Drawbar pull, Loaded lb.7 Gradient performance, Loaded %. Service brake Engine.1 Engine manufacturer / type.2 Engine power acc. to ISO 18 hp. Rated speed 1/min.4 No. of cylinder / cubic capacity /cm Hyundai 2LC-7A LPG seated,000 24 18 8,0 8,274 12,129 771 / 1, 2,98 2,227 /,291 Solid rubber 21 x 7 x 1 1 x x. 2 x 2.8 / 84 4. 10 17. 82 41 8.9 12 91 42 41. x.9 x 1.8 II / A 40.2. 4. 14 1.9 82 2 9.9 118. / 120.1 98.4 / 88.,70 41.2 Mechanic / Hydraulic HMC L4KB 9 2,00 4 / 2,9 Hyundai 0LC-7A LPG seated,000 24 18 9,409 9,2 14,01911 / 1,94,029 2.12 /,2 Solid rubber 21 x 8 x 1 1 x x. 2 x 2.8 / 84 4. 10 17. 82 41 8.9 1 9 44 41. x 4.8 x 1.8 III / A 40.2. 4. 148 1.8 8 2 9.9 114.1 / 120.1 98.4 / 88., 4.2 Mechanic / Hydraulic HMC L4KB 9 2,00 4 / 2,9 0 Other Details 8.2 Type of drive control 8. Operating pressure 8.4 Oil volume 8. Noise bar l db(a) Power Shift 220 / 1 0 80 Power Shift 220 / 1 0 80 PLEASE CONTACT 0 Atlantic Blvd Norcross, GA 0071 TEL (78) 82 7777 FAX (78) 82 7778 www.hceamericas.com 201. 0 Rev. 0