Spare parts manual 700Mk5 Reciprocating compressor unit
Manual for Mk 5 Manual for Mk 5 Compressor type 704 706 708 72 76 Compressor no. Refrigerant R77 R744 Other Control Unisab III None Other Water-cooled top and side covers Compressor cooling Air-cooled top and side covers Air-cooled top covers and water-cooled side covers Air-cooled top and side covers + oil cooling (refrigerant-cooled) Drive type Fixed speed Variable speed Oil separator OVUR OHUR Ex-execution (ATEX) T3 T4 Other Equipment for parallel operation Spare parts manual - 700 Mk 5 000820 en 208. 3/35
Contents Manual for Mk 5... 3. Spare parts Mk 5... 5. How to use the parts list... 5.2 Amendments... 5.3 Parts list... 6.4 Tools for compressor... 22.5 Tool set for change of main bearings... 24.6 Supplementary tool set for SMC 00 Mk 4/5... 25 2. Drawings... 26 2. 704 706 708 Assembly... 26 2.2 72-76 Assembly... 27 2.3 Shaft seal... 28 2.4 Crankshaft, bearings and coupling... 29 2.5 Oil system... 30 2.6 By-pass and service valves... 3 2.7 Coupling - AMR 32 and 350... 32 2.8 Coupling - CFA 30 and 90... 33 2.9 Oil separator, OHUR... 35 Spare parts manual - 700 Mk 5 4/35 000820 en 208.
Spare parts Mk 5. Spare parts Mk 5. How to use the parts list The key to identify a spare part is the pos. no. of the spare part. By means of the pos. no., the position of the spare part can be found on the spare parts drawings. Usually the spare part no. is stated next to the pos. no. If no spare part no. is stated, it may be because the part is not considered a spare part or because the part is not sold as a spare part. Parts which are not sold individually are contained in spare parts kits. The spare parts list contains single parts and components, complete main parts, e.g. cylinder liner with suction valve, kit assemblies which is a collection of spare parts, service kits and gasket kits. Spare parts which are not available as single parts will be contained in complete main parts as sub parts, kit assemblies, service kits and gasket kits. Example: Component: Pos 9-, part number 32.085, designation: Cylinder liner with suction valve S&L. Kit assembly: Part number 384.350, designation: Kit assembly oil pump housing. Service kit: Part number 388.027LL, designation: Service kit ring plates. Gasket kit: Part number 388.009, designation: Gasket kit unloading cylinder. The parts list is divided into sections with the main components of the compressor as headlines. For each main part, e.g. cylinder liner complete, the part no. of the main part is stated first and then the pos. nos. of all single parts contained in the main part. Then all kits related to the main part - including the pos. nos. of all sub parts contained in these kits - are indicated. In some cases a kit will be related to several main parts which is why the kit is not indicated until after the relevant main parts. Example A ring plate kit contains a discharge valve ring plate pos. 20C, a suction valve ring plate pos. 9F and valve springs. Therefore, the ring plate kit will be indicated after the discharge valve ring plate pos. 20..2 Amendments 208. New document based on spare parts manual (0005647) for 700 Mk4 LL but now comprising the CVS system for oil rejection. Spare parts manual - 700 Mk 5 000820 en 208. 5/35
Spare parts Mk 5.3 Parts list Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 Compressor frame A- 3.007 Frame 704 CVS A-2 3.008 Frame 706 CVS A-3 3.009 Frame 708 CVS 3.5 A-4 CVS Frame 72 CVS 3.6 A-5 CVS Frame 76 CVS B- 226.05 Oil level glass C- 33.543 O-ring, 52.07 x 2.62 D- 43.34 Cylinder screw M6 x 20 4 4 4 4 4 CVS System K- 3265.008 Baffle plate, outer SMC/HPC 04, 704 K-2 3265.007 Baffle plate, outer SMC/HPC 06, 706 K-3 3265.000 Baffle plate, outer SMC/HPC 08, 708 K-4 3265.00 Baffle plate, outer SMC/HPC 2, 72 2 K-5 3265.004 Baffle plate, outer SMC/HPC 6, 76 2 J- 3265.009 Baffle plate, inner SMC/HPC 04, 704 J-2 3265.00 Baffle plate, inner SMC/HPC 06, 08, 2, 6 2 2 706, 708, 72, 76 H- 57.007 Demister 2 2 L- 3265.006 Suction baffle plate SMC/HPC 04,06 2, 704, 706, 72 4 4 4 L-2 3265.0 Suction baffle plate SMC/HPC 2, 72 4 L-3 3265.002 Suction baffle plate SMC/HPC 08 6, 708, 76 4 4 M- 3265.005 Baffle rail SMC/HPC 00, 700 2 2 2 4 4 N- 43.006 Cylinder screw M5 x 6 mm 4 4 4 8 8 P- 43.340 Cylinder screw M6 x 6 mm 0 0 0 8 8 R- 437.022 Lock washer Ø.8/6. x.3 mm 0 0 0 8 8 Top cover air cooled 2A- 33.286 Top cover, 2 3 6 8 2A-2 33.287 Top cover with flange, 2C- 2353.000 Gasket for top and side cover 2 3 4 6 8 2E- 43.7 Cylinder screw M6 x 90 30 46 62 96 28 2F- 43.8 Cylinder screw M6 x 20 2 2 2 Top cover water cooled 2A- 33.286 Top cover, 2 3 6 8 2A-2 33.287 Top cover with flange, Water cover for top cover with flange, 33.260 2B- SMC00 Mk4 2B-2 33.259 Water cover left, SMC00 Mk4 2 3 4 2B-3 33.258 Water cover right, SMC00 Mk4 3 4 2C- 2353.000 Gasker for top and side cover 2 3 4 6 8 2D- 33.593 O-ring 253.59 x 3.53 2D-2 33.594 O-ring 266.29 x 3.53 2 3 6 8 2E- 43.7 Cylinder screw M6 x 90 22 34 46 72 96 2F- 43.8 Cylinder screw M6 x 20 2 2 2 2G- 432.036 Nut M4 8 2 6 24 32 2H- 44.007 Staybolt M6 x 90, NV22 W, M4 Tap 8 2 6 24 32 2J- 432.036 Nut M4 8 2 6 24 32 384.725 Kit assembly staybolts for top cover 2 3 4 6 8 Spare parts manual - 700 Mk 5 6/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 2G- / 2J- 432.036 Nut M4 8 2H- 44.007 Staybolt M6 x 90, NV22 w. M4 Tap 4 Side cover - air cooled 3A- 33.224 Side cover, air cooled 2 2 2 4 4 3C- 2353.000 Gasker for top and side cover 2 2 2 4 4 3E- 43.46 Cylinder screw M4 x 65 32 32 32 64 64 Side cover - water cooled 3A-2 33.270 Side cover with cooling fins, HPC00 Mk4 2 2 2 4 4 3B- 33.258 Water cover right, SMC00 Mk4 2 2 3B-2 33.259 Water cover left, SMC00 Mk4 2 2 3C- 2353.000 Gaske for top and side cover 2 2 2 4 4 3D- 33.594 O-ring 226.29 x 3.53 2 2 2 4 4 3F- 43.40 Cylinder screw M4 x 40 24 24 24 48 48 3G- 432.036 Nut M4 8 8 8 6 6 3H- 22.64 Staybolt M4 x 85, SMC/HPC 00 Mk4 8 8 8 6 6 3J- 432.036 Nut M4 8 8 8 6 6 Side cover water cooled kit 384.38 Kit assembly staybolts for side cover 2 2 2 4 4 3G-/ 3J- 432.036 Nut M4 8 3H- 22.64 Staybolt M4 x 85, SMC/HPC 00Mk4 4 388.730 Gasket kit top/side cover 704 2C-/ 3C- 2353.000 Gasket for top and side cover 4 25AG- 33.57 O-ring 85.32 x 3.53 388.73 Gasket kit top/side cover 706 2C-/ 3C- 2353.000 Gasket for top and side cover 5 25AG- 33.57 O-ring 85.32 x 3.53 388.732 Gasket kit top/side cover 708 2C-/ 3C- 2353.000 Gasket for top and side cover 6 25AG- 33.57 O-ring 85.32 x 3.53 388.733 Gasket kit top/side cover 72 2C-/ 3C- 2353.000 Gasket for top and side cover 0 25AG- 33.57 O-ring 85.32 x 3.53 388.734 Gasket kit top/side cover 76 2C-/ 3C- 2353.000 Gasket for top and side cover 2 25AG- 33.57 O-ring 85.32 x 3.53 Additional Gasket for, 65 bar discharge valve 25AG-2 336.000 Spiral wound gasket 84/65 x 4.5 388.24 Gasket kit top/side water covers SMC/HPC 04 Mk4 2D- 33.593 O-ring 253.59 x 3.53 2D-2/ 3D- 33.594 O-ring 266.29 x 3.53 3 Gasket kit top/side water covers 388.25 SMC/HPC 06Mk4 2D- 33.593 O-ring 253.59 x 3.53 2D-2/ 3D- 33.594 O-ring 266.29 x 3.53 4 Spare parts manual - 700 Mk 5 000820 en 208. 7/35
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 388.26 Gasket kit top/side water covers SMC/HPC 08Mk4 2D- 33.593 O-ring 253.59 x 3.53 2D-2/ 3D- 33.594 O-ring 266.29 x 3.53 5 388.28 Gasket kit top/side water covers SMC/ HPC 2 MK4 2D-2 33.594 O-ring 266.29 x 3.53 0 388.29 Gasket kit top/side water covers SMC/ HPC 6 MK4 2D-2 33.594 O-ring 266.29 x 3.53 2 RT oil pump 34.87 Complete RT pump 4Q- 33.546 O-ring 72.69 x 2,62 4F- 349.475 Male stud coupling 4F- 349.476 Plug with nut 349.349 Threaded plug with gasket /8 3 349.89 Threaded plug with gasket /4 3 349.350 Threaded plug with gasket 3/8 3 349.35 Threaded plug with gasket /2 4D- 36.07 Needle valve 3 4L- 364.306 Check valve 6 bar 34.94 Nozzle with mm bleedhole M6 x 0 4E- 43.00 Tight fitting M8-0 x 30 43.359 Cylinder screw M8 x 35 4 4V- 445.093 Pin Ø8 m6 x 50 9B- 23.075 Nipple 4K- 34.84 End cover 4S- 34.92 Gear for oil pump. T/SMC 00 4R- 34.85 Gear with shaft for oil pump T/SMC 00 4T- 34.88 Journal bearing 20/23 x 5 2 4P- 34.89 Journal bearing 20/23 x 20 2 4A- 34.90 RT Pump housing 384.487 Kit assembly complete RT pump 34.87 Complete RT pump 4C-2 43.387 Cylinder screw M2 x 35 4C- 43.388 Cylinder screw M2 x 40 44.200 Rivet, self drilling 2.9 x 6 4 34.200 Mounting parts for RT pump 4C-2 43.387 Cylinder screw M2 x 35 4C- 43.388 Cylinder screw M2 x 40 7C- 43.392 Cylinder screw M2 x 60 2 7B- 436.083 Washer 2 7A- 225.28 Coupling 4B- 2353.260 Gasket 384.35 Kit assembly valves oil pump housing 4D- 36.07 Needle valve 4E-, 4K- 36.07 Needle valve 2 4L- 364.306 Check valve 6 bar Kit assembly differential pressure control 384.726 electronic HPC / 4H- 222.57 Intermediate bracket 4J- 43.332 Cylinder screw M5 x 20 4 4N- 373.37 Pressure transmitter to 59 bar Spare parts manual - 700 Mk 5 8/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit 4R- 437.02 Spring washer 4 4G- 2353.244 Gasket 384.480 Kit assembly differential pressure control mechanical 4H- 222.57 Intermediate bracket 4J- 43.332 Cylinder screw M5 x 20 4 4N-2 43.342 Differential pressure indicator, mechanical 4R- 437.02 Spring washer 4 4G- 2353.244 Gasket Quantity per compressor 704 706 708 72 76 388.229 Gasket kit RT pump SMC 00 Mk4 4B- 2353.260 Gasket for RT pump housing 4G- 2353.244 Gasket for differential pressure control 4Q- 33.546 O-ring 72,69 x 2.62 384.382 Kit assembly plugs oil pump housing 349.89 Plug with gasket /4 5 349.349 Plug with gasket /8 2 343.026 Plug with gasket 3/8 343.027 Plug with gasket /2 33.427 Seal-ring dia. 23.8 349.248 Sealing ring /2 384.489 Kit assembly coupling for RT pump 7A- 225.28 Driving hub for oil pump T/SMC 00 Mk4 7B- 436.083 Washer 2 7C- 43.392 Cylinder screw M2 x 60 2 Bracket for instrument console 384.47 Kit assembly bracket for instrument console 223.976 Bracket for safety cut-out 424.45 Hexagon head screw M6 x 2 2 436.033 Washer 2.5/6.4 x.6 2 Endcover at pump end 5A- 33.266 Bearing cover 5B- 43.40 Cylinder head screw M4 x 40 4 4 4 4 4 Endcover at shaft seal end 6A- 33.2 Bearing cover 6B- 43.45 Cylinder screw M4 x 60 4 4 4 4 4 6E- 436.076 Washer M4 4 4 4 4 4 Service kits 388.32 Gasket kit end/bearing cover T/SMC 04 08Mk4 5D- 2353.225 Gasket 0.3 mm 5D-2 2353.226 Gasket 0.5 mm 5D-3 2353.227 Gasket 0.75 mm 5D-4 2353.228 Gasket.0 mm 6D- 2353.0 Gasket end cover 8B- 2353.005 Gasket shaft seal cover 38E- 33.597 O-ring 29.5 x 5,33 Gasket kit end/bearing cover 388.33 T/SMC 2 6Mk4 5D- 2353.225 Gasket 0.3 mm 5D-2 2353.226 Gasket 0.5 mm 5D-3 2353.227 Gasket 0.75 mm 5D-4 2353.228 Gasket.0 mm 6D- 2353.0 Gasket end cover 8B- 2353.005 Gasket shaft seal cover Spare parts manual - 700 Mk 5 000820 en 208. 9/35
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 38E- 33.597 O-ring 29.5 x 5,33 49-J 2356.40 Gasket 34/27 x.5 2 388.99 Service kit main bearings HPC 04-08 Mk4 5C- 232.02 Main bearing 6C- 232.24 Bushing counter clock wise rotation HPC 388.32 Gasket kit end/bearing cover T/SMC 04-08 Mk4 388.738 Service kit main bearings HPC 2 6 Mk4 5C- 232.02 Main bearing 6C-2 232.24 Bushing counter clock wise rotation HPC 388.33 Gasket kit end/bearing cover T/SMC 2 6 Mk4 49E 233.025 H Half Section Bearing T/SMC Metalpolymer 8 384.388 Kit assembly shaft seal cover HPC 8A- 33.22 Shaft seal cover 8B- 2353.005 Gasket shaft seal cover 8C- 424.94 Cylinder screw M0 x 40 6 384.356 Kit assembly hose connection 8D- 345.43 Hose connection 8 E- 24.90 Hose 384.357 Kit assembly shaft seal 8F- 437.295 Spirolox ring dia. 76 8G- 326.69 Lock spring 8H- 446.08 Grooved pin dia. 4 x 20 0A- 326.66 Retaining flange 0B- 242.058 Spring 0 0H- 326.53 Locking ring 384.387 Kit assembly gaskets for shaft seal SMC00 0D- 33.568 O-ring 75.79 x 3.53 0G- 33.697 O-ring 82.4 x 3.53 0J- 43.329 Cylinder screw M5 x 6 4 8B- 2353.005 Gasket for cover 388.029 Service kit shaft seal SMC 00 0D- 33.568 O-ring 75.79 x 3.53 0 E- 326.67 Slide ring, cast iron 0 F- 326.68 Slide ring, carbon 0G- 33.697 O-ring 82.4 x 3.53 0J- 43.329 Cylinder screw M5 x 6 4 8B- 2353.005 Gasket for cover Oil filter 9A- 57.53 Oil filter 9B- 23.075 Nipple Oil filter kit 388.729 Gasket kit oil change only for C- 33.543 O-ring 52.07 x 2.62 3C- 2353.000 Gasket for top and side cover 3D- 33.594 O-ring 266.29 x 3.53 9A- 57.53 Oil filter Unloading mechanism 2 A- 33.288 Cover for unloading 2 3 4 6 8 2 B- 43.089 Socket cap screw M5 x 20 8 2 6 24 32 2-335.00 Unloading mechanism complete 4 6 8 2 6 2 C- 335.68 Bottom part Spare parts manual - 700 Mk 5 0/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Spare parts manual - 700 Mk 5 000820 en 208. /35 Qty per kit Quantity per compressor 704 706 708 72 76 2 D- 335.000 Unloading piston 2 E- 335.70 Unloading cylinder 2 F- 242.052 Spring 6 2 G- 332.3 Sealing ring 2 H- 332.4 Sealing ring 2 J- 335.7 Locking ring 2 L- 424.92 Cylinder screw M0 x 30 8 2 6 24 32 2 M- 2356.30 Alu - Gasket 25/7 x.5 2 3 4 6 8 2 N- 349.052 Pipe fitting 2 3 4 6 8 2 S- 2354.023 Gasket 00 x 00 x 2 2 3 4 6 8 2 P- 437.275 Spirolox ring 2.7 2 3 4 6 8 Unloading cylinder kit 388.074 Gasket kit unloading mechanism for CMO Mk 2/3 2 3 4 6 8 62 H- 33.534 O-ring 7.65 x.78 2 62 G- 33.535 O-ring 9.25 x.78 2 2 G- 332.3 Sealing ring 2 2 H- 332.4 Sealing ring 2 2 J- 335.7 Locking ring 2 Pipe kit internal 62 A- 343.0 Pipe Kit 704 - internal 335.29 Connection Branch 2 335.9 Nipple for unloading pipe 2 343.03 Pipe - 704 343.04 Pipe 2-704 62 A-2 343.07 Pipe Kit 706 - internal 2 335.29 Connection Branch 3 335.9 Nipple for unloading pipe 3 343.08 Pipe - 706 343.09 Pipe 2-706 343.020 Pipe 3-706 62 A-3 343.000 Pipe Kit 708 - internal 2 335.29 Connection Branch 4 335.9 Nipple for unloading pipe 4 343.007 Pipe - 708 343.008 Pipe 2-708 343.009 Pipe 3-708 343.00 Pipe 4-708 Crankshaft - all without certificate 6 A- 32.409 Crankshaft HPC 04S MK4 complete 6 A-2 32.40 Crankshaft HPC 06S MK4 complete 6 A-3 32.4 Crankshaft HPC 08S MK4 complete 6 F- 43.260 Plug M2 x 6 3 3 3 5 5 6 F-2 43.385 Plug M2 x 25 2 2 2 2 2 6 A-4 32.2000 Crankshaft SMC/HPC 2S + 72 6 A-5 32.200 Crankshaft SMC/HPC 6S + 76 Connecting rod 7 323.04 Connecting rod complete 4 6 8 2 6 7-323.02 Conrod bare 7 A- 233.025-H Half-section bearing, metal- polymer 2 7 B- 232.005 Bushing for piston pin, metal polymer 7 C- 2.068 Bolt for connecting rod (Part of 7 ) (2) 7 D- 433.6 Lock nut (Part of 7 ) (2) Piston 8-324.000 Piston with pin and rings HPO - 4 6 8 2 6 8 A- 325.000 Piston pin for HPO/
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 8 B- 325.29 Piston ring 8 C- 325.24 Oil scraper ring 8 D- 437.38 Seeger ring dia.22 2 388.082 Service kit pair of piston rings 2 3 4 6 8 8 B- 325.29 Piston ring 2 8 C- 325.24 Oil scraper ring 2 388.78 Service kit half section bearings 2 3 4 6 8 7 A- 233.025-H Half-section bearing, metal -polymer 4 7 D- 433.6 Lock nut 4 Service kit piston pins (Sn. to 388.739 6566) 2 3 4 6 8 7 B- 232.26 Bushing for piston pin 2 7 C- 2.068 Bolt for connecting rod 4 8 A- 325.000 Piston pin for HPO/ 2 8 D- 437.38 Seeger ring dia.22 4 Service kit pair of connecting rod bearings 388.740 (Sn. to 6566) 2 3 4 6 8 388.739 Service kit piston pins 388.78 Service kit half section bearings Service kit piston pins, metal polymer 388.745 (Sn. from 6577) 2 3 4 6 8 7 B- 232.005 Bushing for piston pin, metal polymer 2 7 C- 2.068 Bolt for connecting rod 4 8 A- 325.000 Piston pin for HPO/ 2 8 D- 437.38 Seeger ring dia.22 4 Service kit pair of connecting rod bearings 388.746, metal polymer (Sn. from 6577) 2 3 4 6 8 388.745 Service kit piston pins metal polymer 388.78 Service kit half section bearings Cylinder liner with suction valve 9 32.00 Cylinder liner complete T/CMO 30, R77 4 6 8 2 6 9 A-2 32.098 Cylinder liner 9 B- 222.023 Unloading pin 6 9 C- 242.034 Spring for unloading pin 6 9 F- 33.072 Ring plate 9 G- 24.055 Helical spring 4 9 H- 332.075 Suction valve retaining plate Model 9 J- 43.333 Socket cap screw M5 x 25 6 9 32.000 Cylinder liner complete, R744 4 6 8 2 6 9 A-2 32.098 Cylinder liner 9 B- 222.023 Unloading pin 6 9 C- 242.034 Spring for unloading pin 6 9 F- 33.072 Ring plate 9 G- 24.055 Helical spring 4 9 H-2 332.06 Suction valve retaining plate Model 3 9 J- 43.333 Socket cap screw M5 x 25 6 9 K- 2356.288 Gasket 0,5 (=standard) 4 6 8 2 6 9 K-2 2356.289 Gasket 0,8 (=alternative ) 4 6 8 2 6 9 K-3 2356.290 Gasket 0,3 (=alternative 2) 4 6 8 2 6 9 R- 32.5 Adaptor for cylinderliner 4 6 8 2 6 9 S- 33.584 O-ring 36.2 x 3.53 4 6 8 2 6 9 T- 43.333 Cylinder screw M5 x 25 8 2 6 24 32 Spare parts manual - 700 Mk 5 2/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 Discharge valve 20-336.000 Discharge valve, R77 4 6 8 2 6 20 A- 333.029 Discharge valve seat 20 B-2 332.072 Retaining plate, Model 2 20 C-2 33.073 Ring plate.2 20 D- 43.074 Countersunk screw M8 x 40 20 E- 432.063 Nut M8 2 20 F- 245.0 Spring guide 20 H- 24.055 Helical spring 6 20 J- 437.023 Spring washer 20-2 336.04 Discharge valve, T/CMO R744 4 6 8 2 6 20 A- 333.029 Discharge valve seat 20 B-3 332.04 Retaining plate, Model 3 20 C-2 33.073 Ring plate.2 20 D- 43.074 Countersunk screw M8 x 40 20 E- 432.063 Nut M8 20 H- 24.055 Helical spring 6 20 J- 437.023 Spring washer Spare parts manual - 700 Mk 5 000820 en 208. 3/35
Spare parts Mk 5 SELECTION OF SUCTION VALVE TYPE Refrigerant Conditions Valve type Complete Cylinder liner part no. Suction valve retaining plate part no. R77 TE = All Model 700 32-00 332-075 R744 TE = All Model 3 700 32-000 332-06 One stripe indicate Model I Two strips indicate Model II Three strips indicate Model III SELECTION OF DISCHARGE VALVE TYPE Refrigerant Conditions Valve type Complete Discharge valve discharge valve retaining plate part no. part no. R77 TC = All Model 2 336-000 332-072 R744 TC = All Model 3 336 04 332-04 One stripe indicate Model I Two stripes indicate Model II Three stripes indicate Model III Four strips indicate Model IV Spare parts manual - 700 Mk 5 4/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Spare parts manual - 700 Mk 5 000820 en 208. 5/35 Qty per kit Quantity per compressor 704 706 708 72 76 388.735 Service kit pair of cylinder liners 2 3 4 6 8 9 K- 2356.288 Gasket for cylinder liner 0.5mm 2 9 K-2 2356.289 Gasket for cylinder liner 0.8mm 2 9 S- 33.584 O-ring 36.2 x 3.53 2 388.736 Service kit ring plates 2 3 4 6 8 9 F- 33.072 Ring plate 2 9 G- 24.055 Helical spring 8 20 C- 33.073 Ring plate 2 20 G- 24.055 Helical spring 2 388.735 Service kit pair of cylinder liners 388.220 Kit assembly valve springs 9 G-/ 20 G- 24.055 Helical spring 20 Spring for safety head 2 A- 242.059 Spring 4 6 8 2 6 2 B- 334.00 Adaptor for spring 4 6 8 2 6 Oil pressure valve 384.362 Kit assembly oil pressure valve 22 A- 342.50 Oil pressure valve 22 B- 2354.075 Gasket (also included in Gasket kit 388.4) 22 C- 424.25 Hexagon head screw M2 x 30 2 Oil charging valve 384.363 Kit assembly oil charging valve 23 A- 36.8 Needle valve 23 B- 23.073 Threaded reduction nipple 23 C- 233.035 Socket 23 D- 2356.283 Gasket 9/4 x 4.0 23 E- 233.027 Nut 23 F- 2356.23 Gasket 8/0 x.5 23 G- 349.05 Male stud coupling 23 H- 2356.40 Gasket 34/27 x.5 23 J- 34.75 Bend 388.38 Gasket kit oil charging valve 23 D- 2356.283 Gasket 9/4 23 F- 2356.23 Gasket 8/0 23 H- 2356.40 Gasket 34/27 x.5 23 377.463 Packing gland By-pass valve 24-337.000 By pass valve dia 28, 58 BAR 24-2 337.0 By pass valve dia 28, 50 BAR 24-3 337.00 By pass valve dia 28, 48 BAR 388.09 Gasket kit by pass valve ø 28 24 B- 33.56 O-ring 50.39 x 3.53 24 C- 33.566 O-ring 66.27 x 3.53 2 24 D- 43.357 Socket head cap screw M8 x 25 4 4 4 4 4 24 E- 437.023 Spring washer 5/8 x 2 4 4 4 4 4 Stop valves 25 2 36.77 Complete stop valve DN 65, 52 Bar 25 2 36.000 Complete stop valve DN 65, 65 Bar 25 2 2342.000 Discharge pipe flange DN 65, 65 Bar 25 5 36.78 Complete stop valve DN 80, 52 Bar 25 3 36.79 Complete stop valve DN 00, 52 Bar 25 4 36.80 Complete stop valve DN 25, 52 Bar 25 AV- 2333.07 Intermediate flange DN 25 Hand wheel 25 S- 365.09 Hand wheel DN 50/65 (Incl. Screw+washer)
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 25 S-2 365.092 Hand wheel DN 80 (Incl. Screw + washer) 25 S-3 365.093 Hand wheel DN 00 (Incl. Screw + washer) 25 S-4 365.094 Hand wheel DN 25 (Incl. Screw + washer) Connecting parts 25 V- 437.030 Spring Washer dia.4 4 4 4 25 V-2 437.027 Spring Washer dia.6 4 4 4 0 0 25Z- 43.43 Screw valve/comp. M4 x 45 for DN 65 valve 4 4 4 Screw valve/comp. M6 x 55 for DN 80 00 43.036 25Z-2 valve 4 4 4 4 4 25 Z-6 44.264 Stud Bolt M6 x 55 for DN 25 valve 6 6 25 Z-6 432.067 Nut M6 x 2 for DN 25 valve 6 6 25AG- 33.57 O-ring 85.32 x 3.53, Valve DN 50 65, 52 Bar 25AG- 336.000 Spiral wound gasket, valve DN 65, 65 Bar O-ring 20.24 x 3.53, valve DN 80 00, 52 33.58 25AG-2 Bar 25 AG-3 33.585 O-ring 42.47 x 3.53 for valve DN 25 Spare Parts kit stop valve 65 25-2 377.466 Inspection kit SVA DN 65 25-2 377.204 Repair kit SVA DN 65 25-2 377.420 Overhaul kit SVA DN 65 Spare Parts kit stop valve 80 25-5 377.473 Inspection kit SVA DN 80 25-5 377.205 Repair kit SVA DN 80 25-5 377.42 Overhaul kit SVA DN 80 Spare Parts kit stop valve 00 25-3 377.467 Inspection kit SVA DN 00 25-3 377.483 Repair kit SVA DN 00 25-3 377.422 Overhaul kit SVA DN 00 Spare Parts kit stop valve 25 25-4 377.206 Inspection kit SVA DN 25 25-4 377.2005 Repair kit SVA DN 25 25-4 377.2004 Overhaul kit SVA DN 25 Oil suction filter 384.374 Kit assembly oil suction filter 33 A- 57.56 Oil suction filter 33 B- 349.3 Male stud coupling 33 C- 34.77 Oil pipe suction 33 D- 349.343 Flange connector, el-bow 22 mm W. O-ring Suction filter 388.737 Service kit suction filter 2 2 2 34 A- 3425.000 Suction filter open, complete 388.0 Gasket kit suction filter 388.0 Gasket kit suction filter 34 D- 33.599 O-ring 75.57 x 5.53 2 34 F- 33.573 O-ring 9.67 x 3.53 2 34 B- 3425.083 Filter bag 2 2 2 34 C- 3424.058 Insert for filter bag 2 2 2 34 E- 3422.004 Cover for suction filter 2 2 2 34 G- 43.388 Hexagon head screw M2 x 40 8 8 8 34 H- 437.08 Spring washer 2./2.2 x 2.5 8 8 8 34 J- 226.04 Sight glass Dia.24 34 K- 33.437 Bonded seal disc size 030 388.742 Service kit suction filter 72 76 2 2 34 A- 3425.002 Suction filter open, complete 72 6 388.03 Gasket kit suction filter 388.03 Gasket kit suction filter 2 2 34 D- 33.600 O-ring 04.4 x 5.33 2 Spare parts manual - 700 Mk 5 6/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 34 F- 33.58 O-ring 20.24 x 3.53 2 34 B- 3425.096 Filter bag 2 2 34 C- 3424.06 Insert for filter bag 2 2 34 E- 3422.008 Cover for suction filter 2 2 34 G- 43.433 Hexagon head screw M6 x 45 8 8 34 H- 437.027 Spring washer 27.4 / 6.2 x 3.5 8 8 34 J- 226.04 Sight glass Dia.24 34 K- 33.437 Bonded seal disc size 030 Discharge pipe oil system 38 A- 34.76 Discharge pipe oil system 38 C- 2333.024 Connection for discharge pipe 38 C-2 2333.025 Connection for discharge pipe 38 C-3 2333.026 Connection for discharge pipe 388.39 Gasket kit discharge pipe oil system 38 M- 33.549 O-ring 2.82 x 3.53 38 D- 33.549 O-ring 2.82 x 3.53 38 E- 33.597 O-ring 29.5 x 5.33 38 F- 33.549 O-ring 2.82 x 3.53 38 G- 33.552 O-ring 26.58 x 3.53 Cooling water 40 A- 385.240 Set of hoses for cooling water 704 40 A-2 385.245 Set of hoses for cooling water 706 40 A-3 385.24 Set of hoses for cooling water 708 40 A-4 385.255 Set of hoses for cooling water 72 40 A-5 385.256 Set of hoses for cooling water 76 Purge valve 42 A- 36.8 Purge valve 42 B- 349.078 Threaded nipple 42 C- 349.062 Male stud coupling 42 E- 233.045 Nut 42 F- 2334.027 Connection pipe with collar 42 G- 2356.23 Gasket: Included in Gasket kit 388.4 2 2 2 2 2 42 H- 233.027 Nut Couplings Coupling AMR Size 32 & 350 48 G- 524.47 Coupling AMR 32, intermediate part complete 48 G-2 524.48 Coupling AMR 350, intermediate part complete Compressor hub for coupling AMR 32 & 350 48 F- 524.433 Compressor hub for coupling AMR 32 48 F-2 524.434 Compressor hub for coupling AMR 350 48 J- 526.37 Locking assembly TLK 3 70x0 Motor hub for coupling AMR 32 & 350 48 H- 524.43 Motor hub AMR 32 L=00mm bore 48mm 48 H-2 524.44 Motor hub AMR 32 L=00mm bore 55mm 48 H-3 524.45 Motor hub AMR 32 L=00mm bore 60mm 48 H-4 524.46 Motor hub AMR 32 L=00mm bore 65mm 48 H-5 524.49 Motor hub AMR 32 L=25mm bore 60mm 48 H-6 524.492 Motor hub AMR 32 L=55mm bore 65mm 48 H-7 524.493 Motor hub AMR 32 L=55mm bore 75mm 48 H-8 524.495 Motor hub AMR 32 L=60mm bore 80mm 48 H-9 524.507 Motor hub AMR 32 L=60mm bore 90mm 48 H-0 524.47 Motor hub AMR 32 L=85mm bore 60mm 48 H- 524.48 Motor hub AMR 32 L=85mm bore 65mm Spare parts manual - 700 Mk 5 000820 en 208. 7/35
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 48 H-2 524.49 Motor hub AMR 32 L=85mm bore 70mm 48 H-3 524.420 Motor hub AMR 32 L=85mm bore 75mm 48 H-4 524.494 Motor hub AMR 32 L=90mm bore 75mm 48 H-5 Motor hub AMR 32/350 L=20mm bore 524.429 65mm 48 H-6 Motor hub AMR 32/350 L=20mm bore 524.430 70mm 48 H-7 Motor hub AMR 32/350 L=20mm bore 524.43 75mm 48 H-8 Motor hub AMR 32/350 L=20mm bore 524.432 80mm 48 H-9 Motor hub AMR 32/350 L=20mm bore 524.496 00mm 48 H-20 Motor hub AMR 32/350 L=55mm bore 524.42 65mm 48 H-2 Motor hub AMR 32/350 L=55mm bore 524.422 70mm 48 H-22 Motor hub AMR 32/350 L=55mm bore 524.423 75mm 48 H-23 Motor hub AMR 32/350 L=55mm bore 524.424 80mm 48 H-24 Motor hub AMR 32/350 L=55mm bore 524.425 85mm 48 H-25 Motor hub AMR 32/350 L=55mm bore 524.426 90mm 48 H-26 Motor hub AMR 32/350 L=55mm bore 524.427 95mm 48 H-27 Motor hub AMR 32/350 L=55mm bore 524.428 00mm 48 L- 43.377 Screw M0x55 (for motor hub AMR 32) 2 2 2 2 2 48 L- 43.382 Screw M0x60 (for motor hub AMR 32/350) 2 2 2 2 2 48 N- 436.097 Washer 22/0.5x4 2 2 2 2 2 388.222 Spare part set AMR Size 32 524.339 Disc pack (pair) AMR Size 32 524.343 Hardware kit AMR Size 32 524.339 Disc pack (pair + thin washers) AMR 32 48 A- 524.348 Disc pack size 32 single 2 524.354 Ultra thin washer AMR size 32 6 524.343 Hardware kit AMR Size 32 48 B- 524.65 Coupling bolt AMR 32 6 48 C- 524.32 Washer steel Size 32 8 48 D- 524.73 Lock nut Size 32 6 48 E- 524.8 Washer Amr 32 6 388.223 Spare part set AMR Size 350 524.340 Disc pack (pair) AMR Size 350 524.344 Hardware kit AMR Size 350 524.340 Disc pack (pair + thin washers) AMR 350 48 A-2 524.349 Disc pack size 350 single 2 524.355 Ultra thin washer AMR 350 6 524.344 Hardware kit AMR Size 350 48 B-2 524.66 Coupling bolt AMR 350 6 48 C-2 524.322 Washer steel Size 350 8 48 D-2 524.74 Lock nut Size 350 6 48 E-2 524.82 Washer AMR 350 6 Coupling CFA Size 30 48 G-3 524.403 Intermediate part CFA 30 L = 04 mm 48 G-4 524.405 Intermediate part CFA 30 L = 28 mm Spare parts manual - 700 Mk 5 8/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 48 M- 524.384 Pin bolt for CFA 30 6 6 6 Compressor hub for coupling CFA 30 48 F-3 524.397 Compressor hub for coupling CFA30 48 J- 526.37 Locking assembly TLK 3 70x0 48 K- 259.003 Flywheel CFA 30 48 K- 424.256 Set Screw M6 x 25 3 48 K- 436.00 Washer M6 3 Motor hub for coupling CFA 30 48 H-40 524.385 Motor hub CFA 30 Bore 48 mm 48 H-4 524.386 Motor hub CFA 30 Bore 55 mm 48 H-42 524.387 Motor hub CFA 30 Bore 60 mm 48 H-43 524.388 Motor hub CFA 30 Bore 65 mm 388.726 Spare part set CFA Size 30 48 A-3 524.400 Elastic element CFA 30 2 48 L- 524.382 Radial bolt M6x55 mm with securing paste 6 23.334 Copper grease Coupling CFA Size 90 48 G-5 524.404 Intermediate part CFA 90 L = 28 mm 48 G-6 524.406 Intermediate part CFA 90 L = 58 mm 48 G-7 524.407 Intermediate part CFA 90 L = 73 mm 48 G-8 524.409 Intermediate part CFA 90 L = 203 mm 48 M-2 524.383 Pin bolt for CFA 90/40/200 6 6 6 6 6 Compressor hub for coupling CFA 90 48 F-4 524.399 Compressor hub for coupling CFA 90/40 48 J- 526.37 Locking assembly TLK 3 70x0 48 K-2 259.002 Flywheel CFA 90/40 (only 704 and 708) 48 K-2 424.284 Set Screw M20 x 30 2 2 48 K-2 436.009 Washer M20 2 2 Motor hub for coupling CFA 90 48 H-44 524.389 Motor hub CFA 90 Bore 65 mm 48 H-45 524.390 Motor hub CFA 90 Bore 70 mm 48 H-46 524.39 Motor hub CFA 90 Bore 75mm 48 H-47 524.392 Motor hub CFA 90 Bore 80 mm 48 H-48 524.393 Motor hub CFA 90 Bore 85 mm 48 H-49 524.394 Motor hub CFA 90 Bore 90 mm 48 H-50 524.395 Motor hub CFA 90 Bore 95mm 48 H-5 524.396 Motor hub CFA 90 Bore 00 mm 388.723 Spare part set CFA Size 90 48 A-4 524.40 Elastic element CFA 90 2 48 L-2 524.38 Radial bolt M20x70 mm with securing paste 6 23.334 Copper grease Coupling CFA Size 40 48 G-9 524.408 Intermediate part CFA 40 L = 28 mm 48 G-0 524.40 Intermediate part CFA 40 L = 73 mm 48 M-2 524.383 Pin bolt for CFA 90/40/200 8 8 8 Compressor hub for coupling CFA 40 48 F-5 524.399 Compressor hub for coupling CFA 90/40 48 J- 526.37 Locking assembly TLK 3 70x0 48 K-2 259.002 Flywheel CFA 90/40 48 K-2 424.284 Set screw M20 x 30 48 K-2 436.009 Washer M20 Motor hub for coupling CFA 40 48 H-48 524.393 Motor hub CFA 90 Bore 85 mm 48 H-49 524.394 Motor hub CFA 90 Bore 90 mm 48 H-50 524.395 Motor hub CFA 90 Bore 95mm 48 H-5 524.396 Motor hub CFA 90 Bore 00 mm 388.724 Spare part set CFA Size 40 48 A-5 524.402 Elastic element CFA 40 2 Spare parts manual - 700 Mk 5 000820 en 208. 9/35
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 48 L-2 524.38 Radial bolt M20x70 mm with securing paste 8 23.334 Copper grease Capacity regulation 50 A- 343.383 Valve body with solenoid valve 50 A-2 343.384 Valve body with 2 solenoid valves 2 50 A-3 343.385 Valve body with 3 solenoid valves 2 50 B- 372.537 Coil 0 W 220/230V-50/60Hz 2 3 4 6 50 B-2 372.538 Coil 0 W 0V-50/60Hz 2 3 4 6 50 B-3 372.539 Coil 0 W 240V -50Hz 2 3 4 6 50 C- 372.424 Service kit for one solenoid valve Crankcase heater /4 BSP 3084.777 Kit assembly crankcase heater 460W 5V 2 2 57 A- 38.039. Heater 57 B- 349.23 Sealing ring 3084.778 Kit assembly crankcase heater 460W 230V 2 2 57 A-2 38.040. Heater 57 B- 349.23 Sealing ring 3084.776 Kit assembly crankcase heater 460W 250V 2 2 57 A-3 38.038. Heater 57 B- 349.23 Sealing ring 388.4 Gasket kit heater, oil pressure valve etc. C- 33.543 O-ring 52.07 x 2.62 22 B- 2354.075 Gasket 42 G- 2356.23 Gasket 4 45 K- 2356.33 Gasket 57 B- 349.23 Sealing ring Oil return 80 A- 372.002 Valve block EVRB 80 B- 37.037 Orifice kit 3.3mm EVRB/NC 80 C- 375.094 TLT valve 80 J- 372.537 Coil 0 W 220/230V-50/60Hz 80 J-2 372.538 Coil 0 W 0V-50/60Hz 80 J-3 372.539 Coil 0 W 240V -50Hz 80 J-4 372.54 Coil 0 W 24V -50Hz Oil return kit 80 E-/ 80 G 372.089 Strainer kit EVRB block NO/NC 80 P-H- K-M-L 372.086 Service kit EVRB block NC 80 G-K- M-LQ 372.09 Seal kit EVRB block NC 80 L-Q-I 37.037 Orifice kit 3.3mm EVRB/NC 80 X 377.475 Membrane kit Oil Separators Oil Separator OHUR 3209 85 A- 57.77 Coalescer Element 85 B- 33.604 O-ring 329.57 x 5.33 85 C- 33.636 O-ring 29.3 x 5.7 85 D- 2356.33 Alu-ring 27/2 x.5 3 3 3 3 3 85 E- 2356.4 Alu-ring 36/28 x.5 Oil Separator OHUR 402 86 A- 57.78 Coalescer Element 86 B- 33.723 O-ring 405.26 x 5.33 86 C- 33.722 O-ring 266.00 x 5.33 Spare parts manual - 700 Mk 5 20/35 000820 en 208.
Spare parts Mk 5 Pos. no. Part no. Description Qty per kit Quantity per compressor 704 706 708 72 76 86 D- 2356.33 Alu-ring 27/2 x.5 3 3 3 3 3 86 E- 2356.4 Alu-ring 36/28 x.5 Oil cooling Oil cooler R77 92-2 4242.00 Oil cooler Pulley 999 526.073 Cone Clamping unit 999 252.5 Pulley DP 400, 4 Grooves, SPB 999 252.52 Pulley DP 400, 6 Grooves, SPB 999 252.53 Pulley DP 400, 8 Grooves, SPB UNISAB 384.007 Support for SMC 04/06/08 UNISAB III 99 424.76 Hexagon head M8 x 20 4 99C- 424.90 Hexagon head M0 x 20 2 99F- 436.035 Washer 2/0.5 x 2.0 2 99A- 225.2 Console UNISAB III 225.27 Intermediate plate SMC 384.006 Support for SMC 2 6 UNISAB III 99 424.76 Hexagon head M8 x 20 4 99C- 424.90 Hexagon head M0 x 20 2 99F- 436.035 Washer 2/0.5 x 2.0 2 99A- 225.2 Console UNISAB III 225.27 Intermediate plate SMC 225.39 Elevation platform SMC Unisab III Pressure transmitters UNISAB III PPT/ PPT3 373.269 Pressure transmitters AKS 3050 -/25 BAR 2 2 2 2 2 PPT2 373.37 Pressure transmitters AKS 205 -/59 BAR PPT/2/ 3 349.37 Male stud coupling 3 3 3 3 3 PPT3 349.233 V-threaded connection Temperature sensors PPT5/7 373.39 Temperature sensor PT 00, 80mm w. cooling neck 2 2 2 2 2 PPT6 373.329 Temperature sensor PT 00, 80mm w/o cooling neck PPT5/6/ 7 349.077 Reducer 3 3 3 3 3 PPT5/6/ 7 2353.25 Gasket 3 3 3 3 3 Spare parts manual - 700 Mk 5 000820 en 208. 2/35
Spare parts Mk 5.4 Tools for compressor The SMC Mk 3/5 and HPC Mk 4/5 compressor tool set comprises the tool set for Mk 3 and a supplementary set for Mk 4/5. The tool set for Mk 3 4 4 3 6 3 9 2 9 5 7 9 2 0 6 8 22 5 7 20 T077095_0/,2 Fig. Spare parts manual - 700 Mk 5 22/35 000820 en 208.
Spare parts Mk 5 SMC 04-6 Mk3 & TSMC 08-6 Mk3 - Types S-L-E HPC 04-6 Mk4/5 Line no. A600 = Normal set, tools set no. 383-09 Line no. A60 = Extended set, tools set no. 383-0 Line no. A602A = Tools for coupling (SMC 04-08), tools set no. 383-8 Line no. A602B = Tools for coupling (SMC 2-6), tools set no. 383-9 Line no. A603 = Tools for alignment of coupling Pos. no. Designation Dimension Part no. Line no. A600 A60 A602 A603 A B - Clamp with screw, compr. type S and L 383-44 4 4-2 Clamp with screw, compr. type E 383-45 4 4 2 Tools for shaft seal 383-39 3 Tommy screw for cylinder liner 383-04 2 2 4 Theaded plug for unloading cylinder 3/8" BSP 234-07 2 2 5 Supporting plate for pistons 383-5 8 8 6 Spanner for heating cartridge NV 55 383-060 7 Trigger for coupling or belt pulley 383-059 8- Adjusting jig for coupling 383-05 8-2 Adjusting jig for CFA coupling 383-62 9- Wrench for cylinder screw NV 4 9-2 Wrench for cylinder screw NV 5 9-3 Wrench for cylinder screw NV 8 9-4 Wrench for cylinder screw NV 0 9-5 Special wrench for shaft seal NV 4 62-392 0- Retaining-ring plier J 2/G 0-2 Retaining-ring plier A /G - Open end and ring spanner NV 0-2 Open end and ring spanner NV 7-3 Open end and ring spanner NV 9-4 Open end and ring spanner NV 22-5 Open end and ring spanner NV 24-6 Open end and ring spanner NV 27 3- Socket wrench NV 0 3-2 Socket wrench NV 3 3-3 Socket wrench NV 7 3-4 Socket wrench NV 9 3-5 Socket wrench NV 22 3-6 Socket wrench NV 24 3-7 Socket wrench NV 27 3-8 Socket wrench NV 30 3-9 Socket wrench NV 32 3-0 Socket wrench NV 9/6 3- Socket wrench NV 3/4 3-2 Socket wrench NV /6 4 Ratchet handle 5 Speed handle 6 Universal joint for socket wrench 7- Extension rod for socket wrench 7-2 Extension rod for socket wrench 9- Torque wrench 5-90 Nm 9-2 Torque wrench 40-200 Nm 20 Coupler for torque wrench /2 2 2- Open spanner for torque wrench NV /6 2-2 Open spanner for torque wrench NV 3/4 22 Feeler gauge Spare parts manual - 700 Mk 5 000820 en 208. 23/35
Spare parts Mk 5.5 Tool set for change of main bearings Pos. no. Designation Part no. Line no. A606 Tool set for change of SMC/HPC/ main bearings 383.76 Spare parts manual - 700 Mk 5 24/35 000820 en 208.
Spare parts Mk 5.6 Supplementary tool set for SMC 00 Mk 4/5 2 5 3 4 Line no. A605 = Supplementary tool set for Mk 4/5 no. 383.48 Line no. Pos. no. Designation Dimension Part no. A605 Allen key for needle valves in pump housing /4 62.47 2 Box spanner insert for water-cooled covers 22 mm /2 square 62.323 3 Bit adapter for Mk4 coupling 6 mm Allen key 62.342 /2 square 4 Open end spanner for torque wrench (temporarily for Mk4 coupling) NV 3 62.262 5 Oil filter wrench for spin-on oil filter dia.00 62.66 Spare parts manual - 700 Mk 5 000820 en 208. 25/35
Drawings 2. Drawings 2. 704 706 708 Assembly 2L- 2N- 2M- 2P- 62G- 2A- 2S- 62 A-/2/3 20 H- 20 D- 9 G- 62 H- 62 J- 2 E- 2 G- 2 H- 2 D- 2 F- 2 J- 2 C- 9 T- 9 H-3 9 F- 9 A- 9 C- 9 B- 9 K- 9 R- 9 S- 2 B- 2 B- 2 A- 20 E- 20 F- 20 E- 20 J- 20 A- 20 C-2 20 B-2 9 J- Fig. 2: 704-706 - 708 Spare parts manual - 700 Mk 5 26/35 000820 en 208.
Drawings 2.2 72-76 Assembly 2A- 2B- 20E- 20F- 20E- 20J- 20C-2 20B-2 9J- 9H-3 9F- 62A-/2/3 20H- 20D- 9G- 20A- 62J- 62H- 9K- 2E- 2G- 2H- 2D- 2F- 9A- 9C- 9B- 9T- 9R- 2B- 2C- 2J- 9S- Spare parts manual - 700 Mk 5 000820 en 208. 27/35
Drawings 2.3 Shaft seal 0A- 0H- 0E- 0D- 0J- 8G- 0F- 0G- 8B- 8H- 0B- 8D- 8E- 0G- 0B- 8G- 0D- 0J- 0H- 8A- 0A- 0E- 8B- 8A- 8C- 8H- 0F- 8F- 8C- 8F- Fig. 3 Spare parts manual - 700 Mk 5 28/35 000820 en 208.
Drawings 2.4 Crankshaft, bearings and coupling 6 C - 49 A - 49 D - 49 E - 49 C - 49 B - 6 C - 6 A - 5 C - Fig. 4 Spare parts manual - 700 Mk 5 000820 en 208. 29/35
Drawings 2.5 Oil system Fig. 5 Spare parts manual - 700 Mk 5 30/35 000820 en 208.
Drawings 2.6 By-pass and service valves Oil charge valve 23A- 23F- 23D- 23C- 23I- 23G- 23H- 23B- 23E- 42C- 42E- 42H- 42G- 42F- 42G- Purge valve 42A- 24C- 24B- 24-24D- 24E- By-pass valve Fig. 6 Spare parts manual - 700 Mk 5 000820 en 208. 3/35
Drawings 2.7 Coupling - AMR 32 and 350 AMR 32 48F- 48 J- 48 E- 48 D- 48C- 48 F-2 48 A- 48 J- 48 E-2 48 B- 48 H--20 48 C-2 48 N- 48 L- 48 A-2 48 B-2 48 H -20 48 N- AMR 350 48 L- Fig. 7: AMR 32 and 350 coupling Spare parts manual - 700 Mk 5 32/35 000820 en 208.
Drawings 2.8 Coupling - CFA 30 and 90 48F-3 48 J- 48 M- CFA 30 48 A-2 48 L- 48 F-4 48 G-3-4 48 M-2 48 J- 48 M- 48 L-2 48 H 40-43 48 A-4 CFA 90 48 M-2 48 H-44-5 Fig. 8: CFA 30 and 90 coupling Spare parts manual - 700 Mk 5 000820 en 208. 33/35
Drawings 48F-3 48 M- CFA 30 48 J- 48 K- 48 A-2 48 F-4 48 L- 48 M-2 48 J- 48 G-3-4 48 K-2 48 M- 48 H 40-43 48 L-2 CFA 90 48 M-2 48 A-4 48 H-44-5 Fig. 9: CFA 30 and 90 flywheel coupling Spare parts manual - 700 Mk 5 34/35 000820 en 208.
Drawings 2.9 Oil separator, OHUR Discharge gas inlet Ports for pressure difference measurement Discharge gas outlet Fig. 0 B C Drainage A Oil return to compressor Spare parts manual - 700 Mk 5 000820 en 208. 35/35
Version Johnson Controls Denmark ApS SABROE Factory Christian X's Vej 20 8270 Højbjerg Denmark Phone +45 87 36 70 00 Fax +45 87 36 70 05 www.sabroe.com