SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS
Contents Main Characteristics... 2 Synoptic...3- Synoptic: Plug & Receptacle...6 Technical Characteristics... 7 Part Numbering System: Assembled Connectors... 8 Arrangements Selection Chart...9 Keying System...9 Front View of the male insert... 10 Crimp Contacts...11 Part Numbering System: Shells...12 Inserts...13 Cavities Shutters...13 Grommets... 1 Panel Gaskets...15 Plug & Receptacle: Part Numbers & Dimensions Plugs: Standard - Type 26...16 Plugs for EMI shielding - Type 36...16 Receptacles: Standard - Type 23...17 Receptacles with threaded fixing holes - Type 3...17 Receptacles without back thread - Type 03...18 Receptacles Jam nut - Type 0...19 Panel Cut Out...20-21 Part Numbering System: Backshells... Backshells Dimensions... 23-37 Accessories Cable glands...38 Conduct Adaptors...38 Reducers...38 Straight and 90 angled Strain Reliefs...39 Protective Caps...0 Safety Instructions...1
Main Characteristics MAIN CHARACTERISTICS - Connector in accordance with NF F 61-030 and meets EN 555-2 In accordance with the RoHS directive Reverse bayonet connector derived from VG 9523 standard Hard thermoplastic insert is self-extinguishing and halogene free Removable and interchangeable inserts (plug and recepacle can be male or female) Removable contacts retained by spring clip for a safe and quick cabling Angled and straight backshells for integrating in different configurations PAGE 3
Implementation Synoptic Backnut 26 36 Plug Standard Plug for EMI shielding Shielding Adaptor p. 16 Male insert WITH BACKSHELL 23 3 p. 17 Receptacle Standard Receptacle with threaded fixing holes p. 13 Female insert p. 13 Grommet p. 1 Watertight Backshell with shielding adaptor Female Backshell with ISO thread 03 p. 18 Receptacle Without back thread with shielding adaptor WITHOUT BACKSHELL 0 p. 19 Receptacle «Jam Nut» Male insert p. 13 Female insert Male Backshell with UNEF Thread p. 13 with shielding adaptor SERIES /// SIGNAL CONNECTORS
Implementation Synoptic EA p. 23 BR p. 2 Straight BA 90 Angled p. 25 RD p. 26 Straight DA p. 27 90 Angled BD p. 28 Straight DB p. 29 90 Angled RM p. 30 Straight RA p. 31 90 Angled Cable Gland p. 38 BM p. 32 Straight Conduit Adaptor p. 38 RB p. 33 90 Angled RU p. 3 Straight UA p. 35 90 Angled 90 Angled Strain Reliefs p. 39 BU p. 36 Straight Straight Strain Reliefs p. 39 UB p. 37 90 Angled PAGE 5
Synoptic PLUG Plug Shell Coupling ring with roller pins Crimp type contact Removable hard insert Insert Retaining Ring RECEPTACLE Insert Retaining Ring Receptacle shell with wear pins Crimp type contact Removable hard insert Panel sealing gasket Interfacial seal SERIES /// SIGNAL CONNECTORS
Technical Characteristics ELECTRICAL Withstand Voltage : see page 10 Insulation Resistance : > 5000 MΩ Crimp Contact : AWG16, 12 and 8 Max. rating : see page 9 Contact Resistance : AWG16 : < 2.5 mω - AWG12 : < 1.3 mω - AWG8 : < 0.9 mω Creepage distance / Clearance distance : In mated conditions, interfacial seal in compression 16S-1 18-12 18-19 20-15 -1 2-10 28-21 32A13 36A 0A35 0A60 Contacts AWG16S AWG16 AWG16 AWG12 AWG16 AWG8 AWG16 AWG12 AWG12 AWG12 AWG16 Creepage Distance Clearance Distance 10 (0.39) 10 (0.39) 11 (0.33) 10.5 (0.13) 11 (0.33) 10.5 (0.13) 13 (0.512) 12.5 (0.92) 11 (0.33) 10.5 (0.13) 12.5 (0.92) 12 (0.72) 11 (0.33) 10.5 (0.13) 1 (0.551) 13.5 (0.531) 12.5 (0.92) 12 (0.72) 12 (0.72) 11.5 (0.53) 11 (0.33) 10.5 (0.13) MATERIAL Shell : Aluminium alloy Shell plating : Black passivation - 250 H Salt Spray - Conductive Black anodizing - 500 H Salt Spray - Non Conductive Contact : Gold or silver plated brass Insert : Halogen & phosphorus free Thermoplastic UL 9-V0 Requirement according to NF F 16-101 & NF F 16-102 CTI : 600 V following IEC 60112 Grommet & Interfacial seal : Silicone NF F 16-101 & NF F 16-102 requirement 2 or EN 555-2 Retaining Ring : Stainless steel ENVIRONMENTAL Service Temperature : -0 C +100 C (-0 F +212 F) Salt Spray : 250 or 500 hours depending on the treatment Protection Index : IP 66 mated with suitable backshell according to EN60529 Fluid Resistance : gasoil, mineral oil, acid, base and cutting fluid MECHANICAL Durability : 500 mating cycles Vibration : 5 g Shocks : 30 g - 18 ms semi-sinusoïdale Keying System : 3 to 5 positions Application specification FT05006 PAGE 7
Part Numbering System ASSEMBLED CONNECTORS WITH INSERT, WITH OR WITHOUT BACKSHELL R 23 X 28-21 P N Assembled connectors with insert RU K G Backshell SHELL TYPES Receptacles 03 Without Back Thread 0 Jam nut 23 Standard 3 With threaded fixing holes Plugs 26 Standard 36 For EMI shielding SHELL PLATING P X Black passivation - 250 H Salt Spray - Conductive Black anodizing - 500 H Salt Spray - Non Conductive Except 36 shell type SHELL SIZE AND ARRANGEMENTS - Pages 10 Insert Types P Male S Female KEYING SYSTEM - Page 9 TYPE DE RACCORDS - See pages 3- EA - BR - BA - RD - DA - BD - DB - RM - RA - BM - RB - RU - UA - BU - UB BACKSHELL CAPACITIES 0 Backnut EA & Shielding Adaptor BR Autres raccords : D to T Watertight backshell - pages 26-29 C to L Backshell with ISO female thread - pages 30-33 C to X Backshell with UNEF male thread - pages 3-37 GROMMET G With grommet No digit With grommet SOLD SEPARATELY Contacts page 11 Accessories page 38-0 Panel Gaskets page 15 Shutters page 13 SERIES /// SIGNAL CONNECTORS
Arrangements ARRANGEMENT SELECTION CHART No. Contact #16S #16 #12 #8 Nominal Current* Shell Size Arrangement 6 6 25A 18 18-12 7 7 18A 16S1 16S-1 7 7 3A 20 20-15 7 7 5A 2 2-10 10 10 A 18 18-19 13 13 33A 32 32A13 19 19 20A -1 32A 36 36A 35 35 27A 0 0A35 37 37 19A 28 28-21 60 60 17A 0 0A60 * Nominal Current with max. cable cross-section Max cable O.D. 3.9 3.9 5.0 (0.196) 6.9 (0.271) 3.9 5.0 (0.196) 3.9 5.0 (0.196) 5.0 (0.196) 3.9 3.9 KEYING SYSTEM N W Z X Y Front view of male insert - Insert rotation Arrangement N W X Y Z Keying Orientation Angle α( ) isolant 16S-1 0 80 - - 280 N-W-Z 18-12 0 80 - - 280 N-W-Z 18-19 0-120 20 - N-X-Y 20-15 0 80 - - 280 N-W-Z -1 0 80 110 250 280 N-W-X-Y-Z 2-10 0 80 110 250 280 N-W-X-Y-Z 28-21 0 80 110 250 280 N-W-X-Y-Z 32A13 0 65 130 230 295 N-W-X-Y-Z 36A 0 80 110 250 280 N-W-X-Y-Z 0A35 0 70 130 230 290 N-W-X-Y-Z 0A60 0 80 110 250 280 N-W-X-Y-Z N W X Y Z α α α α PAGE 9
Arrangements SIZE 16S SIZE 18 16S-1 7 contacts AWG 16S 18-12 6 contacts AWG 16 18-19 10 contacts AWG 16 W E F N G A B Z W N F E D A B Z N B A F D E C G D C C X H K J Y Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V SIZE 20 SIZE SIZE 2 20-15 -1 2-10 7 contacts AWG 12 19 contacts AWG 16 7 contacts AWG 8 N N N L M F A A F A K U N B W G Z W Z T V P W G Z C E B J S R X D E B Y C H X Y D E G F C D Standards Service Voltage Withstand Voltage NF F 61-030 500 V 3 250 V VG9523 700 V 3 600 V Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V Standards Service Voltage Withstand Voltage NF F 61-030 500 V 3 250 V VG9523 700 V 3 600 V SIZE 28 SIZE 32 SIZE 36 28-21 32A13 36A 37 contacts AWG 16 13 contacts AWG 12 contacts AWG 12 N A B C D E F G H J K L M N P R W S T U V W X a b c d e f X g h j k m n p r s N N 1 1 13 2 10 1 2 12 21 15 3 W Z 20 Z W Z 9 3 11 11 16 12 13 Z 8 19 10 17 5 Y 18 7 5 X Y 6 9 6 X Y 8 7 Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V Standards Service Voltage Withstand Voltage NF F 61-030 500 V 3 250 V VG9523 1 250 V 3 600 V Standards Service Voltage Withstand Voltage NF F 61-030 500 V 3 250 V VG9523 1 250 V 3 600 V SIZE 0 0A35 35 contacts AWG 12 0A60 60 contacts AWG 16 N N W 16 1 15 2 28 17 18 1 3 Z 27 3 29 19 13 26 33 35 30 20 12 25 32 31 21 5 11 6 2 23 10 7 9 8 X Y W X 2 1 23 2 2 3 25 1 26 21 3 0 27 5 5 20 28 39 55 5 53 6 19 38 60 56 6 29 52 57 7 18 30 37 59 58 7 51 8 8 17 50 31 36 9 9 16 35 32 3 33 10 15 11 1 13 12 Z Y Front View of Male Insert Standards Service Voltage Withstand Voltage NF F 61-030 500 V 3 250 V VG9523 1 250 V 3 600 V Standards Service Voltage Withstand Voltage NF F 61-030 0 V 2 550 V VG9523 700 V 2 800 V SERIES /// SIGNAL CONNECTORS
Crimp Contacts MALE CONTACTS L Size Plating Part Number AWG16S 1,6 mm AWG16 1,6 mm AWG12 2, mm AWG8 3,6 mm Ag Au S205589-A00 S205589-A01 Ag S20215-A00 Au Ag Au S20215-A01 S20219-A00 S20219-A01 Ag S201118-A00 Au S201118-A01 Ag S20209-A00 Au Ag Au Ag Au S20209-A01 S20213-A00 S20213-A01 S201515-A00 S201515-A01 Cable crosssection 0,5 à 1,82 mm2 (20 to 15 AWG) 0,5 à 1,82 mm 2 (20 to 15 AWG) 0,5 à 1,82 mm2 (20 to 15 AWG) 0,5 à 1,82 mm 2 (20 to 15 AWG) 1,3 à 2,61 mm2 (15 to 13 AWG) 1,3 à 2,61 mm 2 (15 to 13 AWG) 1,3 à 2,61 mm2 (15 to 13 AWG) 1,3 à 2,61 mm 2 (15 to 13 AWG) 2,5 à mm2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) à 6 mm 2 (11 to 9 AWG) à 6 mm 2 (11 to 9 AWG) Ag : Silver plated - Au : Gold plated A B L 1,95 (0.076) 1,95 (0.076) 1,95 (0.076) 1,95 (0.076) 2,20 (0.086) 2,20 (0.086) 5,0 2,20 (0.196) (0.086) 5,0 2,20 (0.196) (0.086) 5,0 (0.196) 5,0 (0.196) 2,55 (0.100) 2,55 (0.100) 7,6 2,55 (0.299) (0.100) 7,6 2,55 (0.299) (0.100) 7,6 3,80 (0.299) (0.19) 7,6 3,80 (0.299) (0.19) Tool Crimping Locator Insertion Extraction 27,5 OUT005-0167AS0 (1.082) (FT8) 27,5 OUT005-0167AS0 (1.082) (FT8) 30 (1.181) 30 (1.181) 30 (1.181) 30 (1.181) OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) 32 OUT005-0167AS0 (1.259) (FT8) 32 OUT005-0167AS0 (1.259) (FT8) 32 OUT005-0110AS0 (1.259) (M317) 32 OUT005-0110AS0 (1.259) (M317) 32 OUT005-0110AS0 (1.259) (M317) 32 OUT005-0110AS0 (1.259) (M317) 32 OUT005-0110AS0 (1.259) (M317) 32 OUT005-0110AS0 (1.259) (M317) OUTS2088 OUT3178-000A2 OUTEXT-0321 OUTS2088 OUT3178-000A2 OUTEXT-0321 OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-016AS (M520/1-02) OUT005-016AS (M520/1-02) OUT005-0168AS (TP900-1) OUT005-0168AS (TP900-1) OUT3178-000A2 OUT3178-000A2 OUT3178-000A2 OUT3178-000A2 OUT18990-000 OUT18990-000 OUT18990-000 OUT18990-000 OUTEXT-0321 OUTEXT-0321 OUTEXT-0321 OUTEXT-0321 OUTEXT-020 OUTEXT-020 OUTEXT-020 OUTEXT-020 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 FEMALE CONTACTS L ØA ØB ØA ØB Size Plating Part Number AWG16 /16S 1,6 mm AWG12 2, mm AWG8 3,6 mm Cable crosssection A B L 0,5 à 1,82 mm2 1,95 19 OUT005-0167AS0 Ag S20216-A00 (20 to 15 AWG) (0.076) (0.78) (FT8) Au Ag Au 0,5 à 1,82 mm S20216-A01 2 1,95 19 OUT005-0167AS0 (20 to 15 AWG) (0.076) (0.78) (FT8) S20220-A00 S20220-A01 Ag S201117-A00 Au S201117-A01 Ag S20210-A00 Au Ag Au Ag Au S20210-A01 S2021-A00 S2021-A01 S201516-A00 S201516-A01 1,3 à 2,61 mm2 (15 to 13 AWG) 1,3 à 2,61 mm2 (15 to 13 AWG) 1,3 à 2,61 mm2 (15 to 13 AWG) 1,3 à 2,61 mm 2 (15 to 13 AWG) 2,5 à mm2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) 2,5 à mm 2 (13 to 11 AWG) à 6 mm 2 (11 to 9 AWG) à 6 mm 2 (11 to 9 AWG) Ag : Silver plated - Au : Gold plated 2,20 19 (0.086) (0.78) 2,20 19 (0.086) (0.78) 5,0 2,20 25 (0.196) (0.086) (0.98) 5,0 2,20 25 (0.196) (0.086) (0.98) 5,0 (0.196) 5,0 (0.196) 2,55 25 (0.100) (0.98) 2,55 25 (0.100) (0.98) 7,6 2,55 25 (0.299) (0.100) (0.98) 7,6 2,55 25 (0.299) (0.100) (0.98) 7,6 3,80 (0.299) (0.19) 7,6 3,80 (0.299) (0.19) Tool Crimping Locator Insertion Extraction OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) OUT005-0167AS0 (FT8) OUT005-0110AS0 (M317) OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-0176AS (TP1012) OUT005-016AS (M520/1-02) OUT005-016AS (M520/1-02) OUT005-0168AS (TP900-1) OUT005-0110AS0 OUT005-0168AS (M317) (TP900-1) OUT005-0110AS0 (M317) OUT005-0110AS0 (M317) 25 OUT005-0110AS0 (0.98) (M317) 25 OUT005-0110AS0 (0.98) (M317) OUT3178-000A2 OUT3178-000A2 OUT3178-000A2 OUT3178-000A2 OUT18990-000 OUT18990-000 OUT18990-000 OUT18990-000 OUTEXT-0321 OUTEXT-0321 OUTEXT-0321 OUTEXT-0321 OUTEXT-020 OUTEXT-020 OUTEXT-020 OUTEXT-020 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 OUTS2087 - OUTEXT-0550 PAGE 11
Part Numbering System SHELL C 23 X SHELL TYPES Square flange receptacles 03 Without Back Thread 0 Jam nut 23 Standard 3 With threaded fixing holes Plugs 26 Standard 36 For EMI shielding SHELL PLATING P X Black passivation - 250 H Salt Spray - Conductive Black anodizing - 500 H Salt Spray - Non Conductive Except 36 shell type SHELL SIZES 16S - 18-20 - - 2-28 - 32-36 - 0 C23X Square flange receptacle with thread size - Plating : black anodizing Note: All shells are supplied with the insert retaining ring SERIES /// SIGNAL CONNECTORS
Inserts MALE INSERTS WITH INTERFACIAL SEAL Shell Size Arrangement Part Number 16S 16S-1 IR 16S-1PD 18 18-12 IR 18-12PD 18 18-19 IR 18-19PD 20 20-15 IR 20-15PD -1 IR -1PD 2 2-10 IR 2-10PD 28 28-21 IR 28-21PD 32 32A13 IR 32A13PD 36 36A IR 36APD 0 0A35 IR 0A35PD 0 0A60 IR 0A60PD Max cable O.D. 5,0 6,9 (0.272) 5,0 5,0 5,0 Weight (g) 5 7 7 9 12 1 18 32 9 FEMALE INSERTS Shell Size Arrangement Part Number 16S 16S-1 IR 16S-1SD 18 18-12 IR 18-12SD 18 18-19 IR 18-19SD 20 20-15 IR 20-15SD -1 IR -1SD 2 2-10 IR 2-10SD 28 28-21 IR 28-21SD 32 32A13 IR 32A13SD 36 36A IR 36ASD 0 0A35 IR 0A35SD 0 0A60 IR 0A60SD Max cable O.D. 5,0 6,9 (0.272) 5,0 5,0 5,0 Weight (g) 7 10 9 12 15 16 25 30 50 63 71 CAVITIES SHUTTERS Contact Type Part Number AWG16/16S AWG12 AWG8 Male 202730-A00 Female 202730-A00 Male 202732-A00 Female 202733-A00 Male 202735-A00 Female 202736-A00 PAGE 13
Grommets WIRE SEAL GROMMETS FOR MALE INSERTS Shell Size Arrangement Part Number Min cable O.D. Max cable O.D. Weight (g) Note: A follower is provided with each grommet 16S 16S-1 G 16S-1P 18 18-12 G 18-12P 18 18-19 G 18-19P 20 20-15 G 20-15P -1 G -1P 2 2-10 G 2-10P 28 28-21 G 28-21P 32 32A13 G 32A13P 36 36A G 36AP 0 0A35 G 0A35P 0 0A60 G 0A60P 1,3 (0.051) 1,3 (0.051) 1,3 (0.051) 1,7 (0.067) 1,3 (0.051) 2,2 (0.087) 1,3 (0.051) 1,7 (0.067) 1,7 (0.067) 1,7 (0.067) 1,3 (0.051) 5,0 6,9 (0.272) 5,0 5,0 5,0 1,55 2,50 2,20 2,60 3,60 5,15 5,0 9,65 11,15 11,85 13,75 WIRE SEAL GROMMETS FOR FEMALE INSERTS Shell Size Arrangement Part Number Min cable O.D. Max cable O.D. Weight (g) Note: A follower is provided with each grommet 16S 16S-1 G 16S-1S 18 18-12 G 18-12S 18 18-19 G 18-19S 20 20-15 G 20-15S -1 G -1S 2 2-10 G 2-10S 28 28-21 G 28-21S 32 32A13 G 32A13S 36 36A G 36AS 0 0A35 G 0A35S 0 0A60 G 0A60S 1,3 (0.051) 1,3 (0.051) 1,3 (0.051) 1,7 (0.067) 1,3 (0.051) 2,2 (0.087) 1,3 (0.051) 1,7 (0.067) 1,7 (0.067) 1,7 (0.067) 1,3 (0.051) 5,0 6,9 (0.272) 5,0 5,0 5,0 1,55 2,50 2,20 2,60 3,60 5,15 5,0 9,65 11,15 11,85 13,75 SERIES /// SIGNAL CONNECTORS
Accessories PANEL GASKET x D2 D E L S Shell Size L E D2 D 16S 18 20 2 28 32 36 0 32,5 (1.279) 35,0 (1.377) 38,0 (1.96) 1,0 (1.61),5 (1.751) 50,8 (1.999) 57,0 (2.2) 63,5 (2.99) 69,9 (2.751) 2,6 (0.968) 27,0 (1.062) 29, (1.157) 31,8 (1.252) (1.37) 39,7 (1.562),5 (1.752) 9,2 (1.937) 55,5 (2.185),2 (0.165),2 (0.165),2 (0.165),2 (0.165),2 (0.165) 5,1 (0.200) 5,1 (0.200) 5,1 (0.200) 5,1 (0.200) 27, (1.078) 30,8 (1.212) 3,2 (1.36) 37, (1.72) 0,9 (1.610) 6,7 (1.838) 53, (2.102) 59,6 (2.36) 65,5 (2.578) Conductive Non conductive S Part Number Weight S Part Number Weight 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) 2 (0.078) Material : JNR : Nitrile Elastomer - JCR : Conductive silicone J CR 16S 0,80 J CR 18 0,80 J CR 20 0,90 J CR 1,05 J CR 2 1,20 J CR 28 1,5 J CR 32 1,80 J CR 36 2,25 J CR 0 2,80 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) J NR 16S 0,0 J NR 18 0,0 J NR 20 0,5 J NR 0,50 J NR 2 0,60 J NR 28 0,75 J NR 32 0,90 J NR 36 1,10 J NR 0 1,0 PAGE 15
Plugs STANDARD FOR EMI SHIELDING 26 36 This plug with a UNEF back thread and o ring allows you to use either a straight or angled backshell. This plug with a UNEF back thread and o ring allows you to use either a straight or angled backshell. Furthermore, it is equipped with a conductive gasket and conductive plating to ensure a 360 shielding continuity. D2 D1 Shell Size D1 D2 * Weight (g) 16S 18 20 2 28 32 36 0 2 (1.653) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) * Weight without insert & contact 7 / 8 "-20UNEF-2A 1"-20UNEF-2A 1 1 / 8 "-18UNEF-2A 1 1 / "-18UNEF-2A 1 3 / 8 "-18UNEF-2A 1 5 / 8 "-18UNEF-2A 1 7 / 8 "-16UN-2A 2 1 / 16 "-16UNS-2A 2 5 / 16 "-16UN-2A 33,00 (1.299) 37,60 (1.80) 0,60 (1.598),00 (1.732) 7,50 (1.870) 53,0 (2.102) 60,00 (2.362) 68,00 (2.677) 76,00 (2.992) 27 2 5 51 60 72 89 111 10 SERIES /// SIGNAL CONNECTORS
Receptacles STANDARD WITH THREADING FIXING HOLES 23 3 This square receptacle with a UNEF back thread and o ring allows you to use either a straight or angled backshell. It is equipped with fixing holes to enable mounting from the front. This square receptacle has a UNEF back thread and an o ring allows you to use either a straight or angled backshells. It is equipped with threaded fixing holes to enable mounting from the rear. L2 x D2 (Type 23) or x D2a (Type 3) D1 E L L3 P (Max panel thickness / Epaisseur paroi) Shell Size L2 L3 L E D1 16S 18 20 2 28 32 36 0 0,5 (1.59) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 50,5 (1.988) 18,2 (0.716) 23,05 (0.907) 23,05 (0.907) 23,05 (0.907) 23,05 (0.907) 2,05 (0.96) 2,05 (0.96) 2,05 (0.96) 2,05 (0.96) 3,2 (0.126) * To be checked depending on screw type ** Weight without insert & contact 32,5 (1.279) 35,00 (1.377) 38,00 (1.96) 1,00 (1.61),50 (1.751) 50,80 (1.999) 57,00 (2.2) 63,50 (2.99) 69,90 (2.751) 2,6 (0.968) 27 (1.062) 29,0 (1.157) 31,80 (1.251) 0 (1.37) 39,70 (1.562),50 (1.751) 9,20 (1.937) 55,50 (2.185) D2a (Type 3) 7 / 8 "-20UNEF-2A Mx0,7 1"-20UNEF-2A Mx0,7 1 1 / 8 "-18UNEF-2A Mx0,7 1 1 / "-18UNEF-2A Mx0,7 1 3 / 8 "-18UNEF-2A Mx0,7 1 5 / 8 "-18UNEF-2A M5x0,8 1 7 / 8 "-16UN-2A M5x0,8 2 1 / 16 "-16UNS-2A M5x0,8 2 5 / 16 "-16UN-2A M5x0,8 D2 (Type 23) 3,2 (0.125) 3,2 (0.125) 3,2 (0.125) 3,2 (0.125) 3,7 (0.15) 3,7 (0.15),3 (0.169),3 (0.169),3 (0.169) P* 5 5 5 5 5 5 5 6 (0.236) 6 (0.236) ** Weight (g) 2 33 39 53 66 81 96 109 PAGE 17
Square Flange Receptacles WITHOUT BACK THREAD 03 This square flange receptacle without back thread (not possible to adapt a rear backshell) can be mounted onto a watertight box. It is equipped with fixing holes to enable mounting from the front. L2 x D2 D1a E L L3 P (Max panel thickness / Epaisseur paroi) Shell Size L2 L3 L E D1 D1a D2 P* ** Weight (g) 16S 18 20 2 28 32 36 0 0 (1.57) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 18,20 (0.716) 23,05 (0.907) 23,05 (0.907) 23,05 (0.907) 23,05 (0.907) 2,05 (0.96) 2,05 (0.96) 2,05 (0.96) 2,05 (0.96) * To be checked depending on screw type ** Weight without insert & contact 3,2 (0.126) 32,50 (1.279) 35,00 (1.377) 38,00 (1.96) 1,00 (1.61),50 (1.751) 50,80 (1.999) 57,00 (2.2) 63,50 (2.99) 69,90 (2.751) 2,60 (0.968) 27,00 (1.062) 29,0 (1.157) 31,80 (1.251) 0 (1.37) 39,70 (1.562),50 (1.751) 9,20 (1.937) 55,50 (2.185) 27,5 (1.082) 31 (1.0) 3 (1.338) 37,5 (1.76) 1 (1.61) 7 (1.850) 53,5 (2.106) 60 (2.362) 65,5 (2.578),0 (0.881) 25,60 (1.007) 29,00 (1.11) 32,60 (1.267) 35,30 (1.389) 1,0 (1.629) 7,80 (1.881) 5,10 (2.129) 59,00 (2.3) 3,2 (0.126) 3,2 (0.125) 3,2 (0.125) 3,2 (0.125) 3,7 (0.15) 3,7 (0.15),3 (0.169),3 (0.169),3 (0.169) 5 5 5 5 5 5 5 6 (0.236) 6 (0.236) 23 33 0 5 6 82 105 107 SERIES /// SIGNAL CONNECTORS
Receptacles JAM NUT 0 This round flange receptacle witout back thread (not possible to adapt a rear backshell) with nut and panel sealing gasket, can be mounted onto a watertight box. L2 L5 L L3 Panel gasket included P (Max panel thickness / Epaisseur paroi) Shell Size L2 L3 L L5 P * Weight (g) 16S 18 20 2 28 32 36 0 39 (1.535) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 50 (1.968) 50 (1.968) 50 (1.968) * Weight without insert & contact 27 (1.062) 3 (1.338) 3 (1.338) 3 (1.338) 3 (1.338) 35 (1.377) 35 (1.377) 35 (1.377) 35 (1.377) 5,6 (0.0) 5,6 (0.0) 5,6 (0.0) 5,6 (0.0),5 (1.751) 7,5 (1.870) 51 (2.007) 5 (0.125) 57 (2.2) 63,5 (2.99) 70 (2.755) 76 (2.992) 83,5 (3.287) 38 (1.96) 0 (1.57) (1.732) 6 (1.811) 51 (2.007) 56 (2.20) 62 (2.0) 71 (2.795) 75 (2.952) 27,5 (1.082) 31 (1.0) 3 (1.338) 37,5 (1.76) 1 (1.61) 7 (1.850) 53,5 (2.106) 60 (2.362) 65,5 (2.578) 6 (0.236) 6 (0.236) 6 (0.236) 6 (0.236) 6 (0.236) 6 (0.236) 6 (0.236) 6 (0.236) 63 7 78 98 120 150 185 195 PAGE 19
Panel Cut Out RECEPTACLES 03 23 x Ød E* e ØD * Minimal distance between two identical receptacles Shell Size e ØD Ød E* 16S 18 20 2 28 32 36 0 2,6 (0.968) 27,0 (1.062) 29, (1.157) 31,8 (1.252) (1.37) 39,7 (1.562),5 (1.752) 9,2 (1.937) 55,5 (2.185) 28,3 (1.11) 31,7 (1.28) 35 (1.378) 38,3 (1.508) 1,8 (1.66) 7,6 (1.87) 5,3 (2.138) 60,5 (2.382) 66,5 (2.618) 3, (0.13) 3, (0.13) 3, (0.13) 3, (0.13) (0.15) (0.15),5 (0.177),5 (0.177),5 (0.177) 37 (1.56) 39 (1.535) 2 (1.65) 6 (1.811) 9 (1.929) 55 (2.165) 62 (2.1) 70 (2.756) 78 (3.071) RECEPTACLES 3 x Ød E* e ØD * Minimal distance between two identical receptacles Shell Size e ØD Ød E* 16S 18 20 2 28 32 36 0 2,6 (0.968) 27,0 (1.062) 29, (1.157) 31,8 (1.252) (1.37) 39,7 (1.562),5 (1.752) 9,2 (1.937) 55,5 (2.185) 28,3 (1.11) 31,7 (1.28) 35 (1.378) 38,3 (1.508) 1,8 (1.66) 7,6 (1.87) 5,3 (2.138) 60,5 (2.382) 66,5 (2.618),5 (0.177),5 (0.177),5 (0.177),5 (0.177),5 (0.177) 5,5 (0.216) 5,5 (0.216) 5,5 (0.216) 5,5 (0.216) 37 (1.56) 39 (1.535) 2 (1.65) 6 (1.811) 9 (1.929) 55 (2.165) 62 (2.1) 70 (2.756) 78 (3.071) SERIES /// SIGNAL CONNECTORS
Panel Cut Out RECEPTACLES 0 E* ØD L Ød L * Minimal distance between two identical receptacles Shell Size L ØD Ød E* 16S 18 20 2 28 32 36 0 18,1 (0.712) 19,2 (0.756) 20, (0.803),8 (0.898),8 (0.898) 25,1 (0.988) 27,6 (1.087) 29,8 (1.173) 32,5 (1.279) 32 (1.259) 35,1 (1.381) 38,3 (1.508) 1,5 (1.63),7 (1.760) 51 (2.007) 57, (2.260) 63,7 (2.508) 69,9 (2.752) 3,5 (0.138) 3,5 (0.138) 3,5 (0.138),5 (0.177),5 (0.177),5 (0.177) 7 (1.850) 50 (1.968) 53 (2.086) 57 (2.2) 60 (2.362) 66 (2.598) 72 (2.83) 79 (3.110) 86 (3.385) E* e ØD * Minimal distance between two identical receptacles Shell Size e ØD E* 16S 18 20 2 28 32 36 0 30,9 (1.216) 33,8 (1.331) 36,9 (1.53) 0 (1.575) 3,6 (1.716) 9,5 (1.98) 56,2 (2.215) 62,5 (2.61) 69,3 (2.728) 32 (1.259) 35,1 (1.381) 38,3 (1.508) 1,5 (1.63),7 (1.760) 51 (2.007) 57, (2.260) 63,7 (2.508) 69,9 (2.752) 7 (1.850) 50 (1.968) 53 (2.086) 57 (2.2) 60 (2.362) 66 (2.598) 72 (2.83) 79 (3.110) 86 (3.385) PAGE 21
Numbering System : Backshells A RU K P -1P SHELL TYPES - See pages 3- EA - BR - BA - RD - DA - BD - DB - RM - RA - BM - RB - RU - UA - BU - UB BACKSHELL CAPACITIES O Backnut EA & Shielding Adaptor BR Other backshells D to T Watertight backshells - pages 26-29 C to L Female backshells with ISO thread - pages 30-33 C to X Male backshells with UNEF thread - pages 3-37 SHELL PLATING P X Black passivation - 250 H Salt Spray - Conductive Black anodizing - 500 H Salt Spray - Non Conductive SHELL SIZES 16S - 18-20 - - 2-28 - 32-36 - 0 GROMMETS XXXX With grommet - See below table -000 With grommet Shell Size Grommet Male Female 16S -1P -1S 18-12P -19P -12S -19S 20-15P -15S -1P -1S 2-10P -10S 28-21P -21S 32 A13P A13S 36 AP AS 0 A35P A60P A35S A60S SERIES /// SIGNAL CONNECTORS
Backshells : Type EA BACKNUT PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 L2 L2 Shell Size Backshell Weight (g) L2 16S 11 18 13 20 15 18 2 21 28 18 32 26 36 27 0 31 20 (0.787) (0.866) (0.866) (0.866) (0.866) (0.866) (0.866) (0.866) (0.866) (1.732) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 52,5 (2.066) 27 (1.062) 30 (1.181) 33, 37 (1.56) 0 (1.57) 5 (1.771) 52 (2.07) 57 (2.2) 63 (2.80) PAGE 23
Straight Backshell: Type BR SHIELDING ADAPTOR PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 L L3 L3 ØD2 ØD3 ØD2 ØD3 L2 L2 Shell Size Backshell Weight (g) ØD2 ØD3 L2 L3 L 16S 27 18 33 20 3 9 2 53 28 66 32 8 36 91 0 105 27,5 (1.083) 29,5 (1.161) 3 (1.338) 37,5 (1.76) 39,5 (1.555),5 (1.752) 53 (2.087) 57,5 (2.26) 6 (2.520) 8,5 (0.33) 10,5 (0.13) 13,5 (0.531) 17 (0.669) 19 (0.78) 21,5 (0.86) 30 (1.181) 35 (1.378) 1 (1.61) 12 (0.72) 16 (0.630) 18 (0.708) (0.866) 25 (0.98) 27,5 (1.083) 36 (1.17) 0 (1.575) 7 (1.850) 23 (0.905) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 76 (2.992) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 89,5 (3.523) 13 (0.512) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 1,5 (0.571) 23 (0.905) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) 2,5 (0.96) SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type BA SHIELDING ADAPTOR PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 Ø D1 Ø D1 Shell Size Backshell Weight (g) H1 16S 97 27,5 (1.083) 65 (2.559) 71 (2.795) 18 125 29,5 (1.161) 75,5 (2.972) 79 (3.110) 20 18 3 (1.338) 77 (3.031) 80,5 (3.169) 163 37,5 (1.76) 78,5 (3.091) 82 (3.8) 2 191 39,5 (1.555) 80 (3.150) 85 (3.36) 28 6,5 (1.752) 83,5 (3.287) 85,5 (3.366) 32 316 53 (2.087) 86,5 (3.06) 91 (3.583) 36 366 57,5 (2.26) 89 (3.50) 95 (3.70) 0 3 6 (2.520) 92 (3.6) 98,5 (3.878) See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) PAGE 25
Straight Backshell: Type RD WATERTIGHT BACKSHELL PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 16S 5 18 9 20 85 88 2 88 28 127 32 201 36 213 0 231 28 (1.102) 28 (1.102) 39 (1.535) 39 (1.535) 39 (1.535) 50 (1.968) 6 (2.519) 6 (2.519) 6 (2.519) 81 (3.188) 81 (3.188) 81 (3.188) 81 (3.188) 80 (3.19) 93 (3.661) 93 (3.661) 93 (3.661) 93 (3.661) 10 (.09) 110,5 (.350) 110,5 (.350) 115,5 (.57) 113,5 (.68) 120,5 (.7) 120,5 (.7) 120,5 (.7) 120,5 (.7) 5,5 (0.216) 8 (0.315) 7,5 (0.295) 10 (0.39) E E 9,5 (0.37) 11,5 (0.52) Ø D2 (Cable Diameter Ranges) 12 (0.72) 13 (0.512) 13,5 (0.531) 17 (0.669) 16 (0.630) 21 (0.826) D E F H L M D E F H L M D E F H L M 16,5 (0.69) 20 (0.787) 19,5 (0.768) 23,5 (0.925) 23 (0.905) 28 (1.102) D E F H L M N P Q 31 (1.0) 33 (1.299) E F H L M N P Q T F H L M N P Q T N P Q T SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type BA WATERTIGHT BACKSHELL PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 ØD2 ØD2 Shell Size Backshell Weight (g) H1 16S 97 18 112 20 155 161 2 189 28 3 32 333 36 387 0 3 28 (1.102) 28 (1.102) 39 (1.535) 39 (1.535) 39 (1.535) 50 (1.968) 6 (2.519) 6 (2.519) 6 (2.519) 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.150) 83,5 (3.287) 86,5 (3.06) 89 (3.503) 92 (3.6) 86 (3.386) 89 (3.503) 90,5 (3.563) 92 (3.6) 9 (3.701) 96,5 (3.799) 102 (.016) 106 (.173) 109,5 (.311) 5,5 (0.216) 8 (0.315) 7,5 (0.295) 10 (0.39) E E 9,5 (0.37) 11,5 (0.52) Ø D2 (Cable Diameter Ranges) 12 (0.72) 13 (0.512) 13,5 (0.531) 17 (0.669) 16 (0.630) 21 (0.826) D E F H L M D E F H L M D E F H L M 16,5 (0.69) 20 (0.787) 19,5 (0.768) 23,5 (0.925) 23 (0.905) 28 (1.102) D E F H L M N P Q 31 (1.0) 33 (1.299) E F H L M N P Q T F H L M N P Q T N P Q T PAGE 27
Straight Backshell: Type BD WATERTIGHT BACKSHELL PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 16S 70 18 82 20 128 136 2 10 28 15 32 285 36 30 0 336 28 (1.102) 30 (1.181) 39 (1.535) 39 (1.535) 0 (1.57) 50 (1.968) 6 (2.519) 6 (2.519) 6 (2.519) 99,5 (3.917) 103 (.055) 103 (.055) 108 (.252) 108 (.252) 123,5 (.862) 133,5 (5.256) 133,5 (5.256) 138,5 (5.53) 136,5 (5.708) 113 13,5 (.9) (5.650) 113 13,5 (.9) (5.650) 113 13,5 (.9) (5.650) 113 13,5 (.9) (5.650) 5,5 (0.216) 8 (0.315) 7,5 (0.295) 10 (0.39) E E 9,5 (0.37) 11,5 (0.52) Ø D2 (Cable Diameter Ranges) 12 (0.72) 13 (0.512) 13,5 (0.531) 17 (0.669) 16 (0.630) 21 (0.826) D E F H L M D E F H L M D E F H L M 16,5 (0.69) 20 (0.787) 19,5 (0.768) 23,5 (0.925) 23 (0.905) 28 (1.102) D E F H L M N P Q 31 (1.0) 33 (1.299) E F H L M N P Q T F H L M N P Q T N P Q T See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type DB WATERTIGHT BACKSHELL PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 Ø D2 Ø D1 Ø D2 Ø D1 Shell Size Backshell Weight (g) H1 16S 130 18 157 20 216 7 2 256 28 318 32 68 36 536 0 616 27 (1.062) 30 (1.181) 39 (1.535) 39 (1.535) 0 (1.57) 50 (1.968) 6 (2.519) 6 (2.519) 6 (2.519) 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.150) 83,5 (3.287) 118,5 (.665) 123 (.83) 12,5 (.902) 131 (5.157) 132 (5.197) 139,5 (5.92) 86,5 15 (3.06) (5.709) 89 (3.503) 19 (5.866) 92 152,5 (3.6) (6.00) 5,5 (0.216) 8 (0.315) 7,5 (0.295) 10 (0.39) E E 9,5 (0.37) 11,5 (0.52) Ø D2 (Cable Diameter Ranges) 12 (0.72) 13 (0.512) 13,5 (0.531) 17 (0.669) 16 (0.630) 21 (0.826) D E F H L M D E F H L M D E F H L M 16,5 (0.69) 20 (0.787) 19,5 (0.768) 23,5 (0.925) 23 (0.905) 28 (1.102) D E F H L M N P Q 31 (1.0) 33 (1.299) E F H L M N P Q T F H L M N P Q T N P Q T See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) PAGE 29
Straight Backshell: Type RM ISO THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 ØD2 ISO Thread M12 x 1,5 M16 x 1,5 M20 x 1,5 M25 x 1,5 M32 x 1,5 M0 x 1,5 M50 x 1,5 16S 3 18 65 20 8 97 2 106 28 139 32 200 36 218 0 262 50 (1.968) 65 (2.559) 65 (2.559) 65 (2.559) 65 (2.559) 75 (2.953) 75 (2.953) 75 (2.953) 75 (2.953) 7 (2.913) 95,5 (3.760) 95,5 (3.760) 95,5 (3.760) 93,5 (3.681) 105,5 (.15) 105,5 (.15) 105,5 (.15) 105,5 (.15) 27 (1.062) 30 (1.181) 3 (1.338) 37 (1.57) 0 (1.575) 5 (1.772) 53 (2.087) 57 (2.2) 6 (2.520) C D E C D E G C D E G C D E G H D E G H E G H K E G H K G H K L G H K L SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type RA ISO THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 ØD2 ØD2 Shell Size Backshell Weight (g) H1 ØD2 ISO Thread M12 x 1,5 M16 x 1,5 M20 x 1,5 M25 x 1,5 M32 x 1,5 M0 x 1,5 M50 x 1,5 16S 86 18 125 20 19 165 2 195 28 239 32 33 36 396 0 80 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.150) 83,5 (3.287) 86,5 (3.06) 89 (3.50) 92 (3.6) 6 (2.520) 70 (2.756) 71,5 (2.815) 73 (2.87) 7 (2.913) 81,5 (3.8) 87 (3.25) 91 (3.582) 9,5 (3.720) 27 (1.062) 30 (1.181) 3 (1.338) 37 (1.57) 0 (1.575) 5 (1.772) 53 (2.087) 57 (2.2) 6 (2.520) C D E C D E G C D E G C D E G H D E G H E G H K E G H K G H K L G H K L PAGE 31
Straight Backshell: Type BM ISO THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 ØD2 ISO Thread M12 x 1,5 M16 x 1,5 M20 x 1,5 M25 x 1,5 M32 x 1,5 M0 x 1,5 M50 x 1,5 16S 61 18 98 20 127 16 2 159 28 205 32 28 36 309 0 367 6,5 (2.539) 73 (2.87) 73 (2.87) 73 (2.87) 73 (2.87) 78 (3.071) 78 (3.071) 78 (3.071) 78 (3.071) 88,5 (3.8) 103,5 (.075) 103,5 (.075) 103,5 (.075) 101,5 (3.996) 108,5 (.272) 108,5 (.272) 108,5 (.272) 108,5 (.272) 27 (1.062) 30 (1.181) 3 (1.338) 37 (1.57) 0 (1.575) 5 (1.772) 53 (2.087) 57 (2.2) 6 (2.520) C D E C D E G C D E G C D E G H D E G H E G H K E G H K G H K L G H K L See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type RB FEMALE BACKSHELL WITH ISO THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 Ø D2 Ø D1 Ø D2 Ø D1 Shell Size Backshell Weight (g) H1 ØD2 ISO Thread M12 x 1,5 M16 x 1,5 M20 x 1,5 M25 x 1,5 M32 x 1,5 M0 x 1,5 M50 x 1,5 16S 115 18 173 20 212 236 2 27 28 336 32 371 36 37 0 516 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.150) 83,5 (3.287) 86,5 (3.06) 83,5 (3.287) 93 (3.661) 9,5 (3.720) 96 (3.780) 97 (3.819) 10,5 (.11) 110 (.331) 27 (1.062) 30 (1.181) 3 (1.338) 37 (1.57) 0 (1.575) 5 (1.772) 53 (2.087) 89 11 57 (3.50) (.88) (2.2) 92 (3.6) 117,5 (.626) 6 (2.520) C D E C D E G C D E G C D E G H D E G H E G H K E G H K G H K L G H K L See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) PAGE 33
Straight Backshell: Type RU UNEF THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 ØD2 UNEF Thread 1 / 2"-20 5 / 8"-2 3 / "-20 7 / 8"-20 1"-20 1 1 / 16"-18 1 3 / 16"-18 1 5 / 16"-18 1 7 / 16"-18 16S 26 18 30 20 36 0 2 5 28 76 32 10 36 11 0 131 3 (1.338) 3 (1.338) 3 (1.338) 3 (1.338) 3 (1.338) 9 (1.929) 9 (1.929) 9 (1.929) 9 (1.929) 60 (2.362) 69,5 (2.736) 69,5 (2.736) 69,5 (2.736) 69,5 (2.736) 79,5 (3.130) 79,5 (3.130) 79,5 (3.130) 79,5 (3.130) 27 (1.062) 30 (1.181) 33, (1.362) 36,6 (1.31) 0 (1.57) 5 (1.771) 52, (2.063) 56,8 (2.236) 63, (2.96) C F H K M N C F H K M N R C F H K M N R H K M N R H K M N R H K M N R U X K M N R U X M N R U X U X SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type UA UNEF THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 ØD2 ØD2 Shell Size Backshell Weight (g) L2 ØD2 UNEF Thread 1 / 2"-20 5 / 8"-2 3 / "-20 7 / 8"-20 1"-20 1 1 / 16"-18 1 3 / 16"-18 1 5 / 16"-18 1 7 / 16"-18 16S 70 18 92 20 106 11 2 139 28 160 32 2 36 275 0 329 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.19) 83,5 (3.287) 86,5 (3.06) 89 (3.503) 92 (3.6) 0 (1.575) 3 (1.693),5 (1.751) 6 (1.811) 7 (1.850) 9,5 (1.99) 55 (2.165) 59 (2.323) 62,5 (2.61) 27 (1.062) 30 (1.181) 33 (1.299) 37 (1.56) 0 (1.57) 5 (1.772) 52 (2.07) 57 (2.2) 63 (2.80) C F H K M N C F H K M N R C F H K M N R H K M N R H K M N R H K M N R U X K M N R U X M N R U X U X PAGE 35
Straight Backshell: Type BU UNEF THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 ØD2 ØD2 L2 L2 Shell Size Backshell Weight (g) L2 ØD2 UNEF Thread 1 / 2"-20 5 / 8"-2 3 / "-20 7 / 8"-20 1"-20 1 1 / 16"-18 1 3 / 16"-18 1 5 / 16"-18 1 7 / 16"-18 16S 52 18 63 20 80 90 2 97 28 12 32 188 36 205 0 236 55,5 (2.185) 62 (2.1) 62 (2.1) 62 (2.1) 6 (2.520) 72 (2.835) 72 (2.835) 72 (2.835) 72 (2.835) 79,5 (3.130) 92,5 (3.62) 92,5 (3.62) 92,5 (3.62) 92,5 (3.62) 102,5 (.035) 102,5 (.035) 102,5 (.035) 27 (1.063) 30 (1.181) 33 (1.299) 37 (1.56) 0 (1.57) 5 (1.772) 52 (2.07) 57 (2.2) 102,5 63 (.035) (2.80) C F H K M N C F H K M N R C F H K M N R H K M N R H K M N R H K M N R U X K M N R U X M N R U X U X See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) SERIES /// SIGNAL CONNECTORS
90 Angled Backshells: Type UB UNEF THREAD PLUG RECEPTACLE 26 36 23 3 p. 16 p. 16 p. 17 p. 17 H1 H1 ØD2 ØD2 Shell Size Backshell Weight (g) H1 ØD2 UNEF Thread 1 / 2"-20 5 / 8"-2 3 / "-20 7 / 8"-20 1"-20 1 1 / 16"-18 1 3 / 16"-18 1 5 / 16"-18 1 7 / 16"-18 16S 112 18 138 20 16 179 2 212 28 277 32 371 36 37 0 516 65 (2.559) 75,5 (2.972) 77 (3.031) 78,5 (3.091) 80 (3.19) 83,5 (3.287) 7,5 (2.933) 82 (3.8) 83,5 (3.287) 85 (3.36) 88 (3.65) 98,5 (3.878) 27 (1.063) 30 (1.181) 33 (1.299) 37 (1.56) 0 (1.57) 5 (1.772) 86,5 10 52 (3.06) (.09) (2.07) 89 (3.503) 92 (3.6) 108 (.252) 57 (2.2) 111,5 63 (.390) (2.80) C F H K M N C F H K M N R C F H K M N R H K M N R H K M N R H K M N R U X K M N R U X M N R U X U X See page 2 regarding D2, D3 & L3 dimensions (BR Backshell) PAGE 37
Accessories CABLE GLANDS A E C P D Part Number IP68 Material : Nickel plated brass P C E A D P M12 x 1,5 M16 x 1,5 M16 x 1,5 M20 x 1,5 M20 x 1,5 M25 x 1,5 M25 x 1,5 M32 x 1,5 M32 x 1,5 M0 x 1,5 M0 x 1,5 7 (0.275) 7 (0.275) 7 (0.275) 7 (0.275) 7 (0.275) 8 (0.315) 8 (0.315) 8,5 (0.33) 8,5 (0.33) 8,5 (0.33) 11 (0.33) O ring included 1 (0.551) 17 (0.669) 17 (0.669) (0.866) (0.866) 26 (1.02) 30 (1.181) 33 (1.299) 0 (1.57) 2 (1.653) 52 (2.07) 1 (0.551) 1 (0.551) 17 (0.669) 20 (0.787) (0.866) 2 (0.9) 30 (1.181) 30 (1.181) 0 (1.57) 0 (1.57) 52 (2.07) to 6 (0.16 to 0.2) STD001-005AS to 6 (0.16 to 0.2) STD001-006AS 6 to 8 (0.2 to 0.31) STD001-007AS 7 to 10 (0.27 to 0.39) STD001-0372AS 9 to 12 (0.35 to 0.7) STD001-008AS 11 to 1 (0.3 to 0.55) STD001-009AS 13 to 18 (0.51 to 0.71) 13 to 18 (0.51 to 0.71) STD001-0373AS STD001-037AS 17 to 2 (0.67 to 0.9) STD001-0375AS 17 to 2 (0.67 to 0.9) STD001-0390AS 25 to 32 (0.98 to 1.26) STD001-0369AS CONDUIT ADAPTORS A E L B P Conduit Part Number IP67 Material : Black Polyamide with metal insert L P E A B P M12 x 1,5 M16 x 1,5 M20 x 1,5 M25 x 1,5 M32 x 1,5 M32 x 1,5 M0 x 1,5 5 (0.196) 5 (0.196) 6 (0.236) 7 (0.275) 13 (0.512) 8 (0.315) 8 (0.315) Flat gasket included 37 (1.6) 38 (1.96) 5 (1.771) 50 (1.968) 5,7 (0.) 9,7 (0.381) 13,7 (0.539) 18,6 (0.732) 56 2 (2.20) (0.9) 51 (2.007) 65 (2.559) 25,7 (1.011) 33, (1.31) 19 (0.78) 2 (0.9) 30 (1.181) 36 (1.17) 36 (1.17) 6 (1.811) 55 (2.165) 10 / 12 STD030-0106AS 12 / 16 STD030-0107AS 17 / 20 STD030-0108AS 23 / 25 STD030-0109AS 23 / 25 STD030-0112AS 29 / 32 STD030-0110AS 36 / 0 STD030-0111AS REDUCERS A B P E Part Number Material : Nickel plated brass B E A P M16 x 1,5 M12 x 1,5 M20 x 1,5 M16 x 1,5 M25 x 1,5 M20 x 1,5 M32 x 1,5 M20 x 1,5 M32 x 1,5 M25 x 1,5 M0 x 1,5 M32 x 1,5 O ring included 20 (0.787) 2 (0.95) 28 (1.102) 36 (1.17) 36 (1.17) 2 (1.653) 7 (0.275) 7 (0.275) 7 (0.275) 8 (0.315) 8,5 (0.33) 8,5 (0.33) STD001-010AS STD001-011AS STD001-0377AS STD001-0376AS STD001-012AS STD001-0371AS SERIES /// SIGNAL CONNECTORS
Accessories 90 ANGLED STRAIN RELIEFS D Material : Black anodised aluminium (Also available : nickel plated finish, contact us) L Ø H Thread L D H Ø min. Ø max. Part Number 1 /2"-20 UNEF 5 /8"-2 UNEF 3 /"-20 UNEF 7 /8"-20 UNEF 25,70 (1.011) 28,05 (1.10) 31,50 (1.20) 33,75 (1.329) 37,15 1"-20 UNEF (1.62) 1 1 /16"-18 UNEF 0,60 (1.598) 1 3 /16"-18 UNEF 5 (1.730) 1 5 /16"-18 UNEF 7,05 (1.852) 1 7 /16"-18 UNEF 50,15 (1.97) 15,50 (0.610) 18,70 (0.736) 21,80 (0.858) 25,00 (0.98) 28,20 (1.110) 30,25 (1.190) 3,15 (1.3) 36,85 (1.51) 0,50 (1.59) 20,70 (0.815),00 (0.866) 23,80 (0.937) 25,30 (0.996) 26,80 (1.055) 28,30 (1.112) 29,90 (1.177) 31,60 (1.2) 33,20 (1.307) 5,15 (0.203) 7,25 (0.285) 10,55 (0.15) 12,05 (0.7) 15,95 (0.628) 17,95 (0.707) 21,05 (0.829) 2,25 (0.955) 27,5 (1.081) 5,80 (0.8) STD001-026AS 7,80 (0.307) STD001-027AS 11,2 (0.1) STD001-028AS 13,2 (0.520) STD001-029AS 17 (0.669) STD001-030AS 19 (0.78) STD001-031AS,7 (0.893) STD001-032AS 25,90 (1.019) 29 (1.11) STD001-033AS STD001-03AS STRAIGHT STRAIN RELIEFS Thread L D Ø min. Ø max. Part Number D Material : Black anodised aluminium (Also available : nickel plated finish, contact us) L Ø 1 /2"-20 UNEF 5 /8"-2 UNEF 3 /"-20 UNEF 7 /8"-20 UNEF 1"-20 UNEF 1 1 /16"-18 UNEF 1 3 /16"-18 UNEF 1 5 /16"-18 UNEF 1 7 /16"-18 UNEF,25 (0.876),25 (0.876),25 (0.876) 28,25 (1.112) 28,25 (1.112) 28,25 (1.112) 28,25 (1.112) 28,25 (1.112) 28,25 (1.112) 15,50 (0.610) 18,70 (0.736) 21,80 (0.858) 25,00 (0.98) 28,20 (1.110) 30,25 (1.191) 33,55 (1.321) 36,85 (1.51) 0,50 (1.59) 5,15 (0.203) 7,25 (0.285) 10,55 (0.15) 12,05 (0.7) 15,85 (0.62) 17,95 (0.707) 21,05 (0.829) 2,25 (0.955) 27,5 (1.081) 6,80 (0.268) 7,95 (0.313) 12,75 (0.502) 1,6 (0.575) 17,8 (0.701) 19,8 (0.780) 23 (0.906) 26,10 (1.028) 28,80 (1.13) STD001-017AS STD001-018AS STD001-019AS STD001-020AS STD001-021AS STD001-0AS STD001-023AS STD001-02AS STD001-025AS PAGE 39
Accessories PROTECTIVE CAPS B FM X 18 PROTECTIVE CAPS FOR RECEPTACLE EC Nylon rope EM Stainless steel chain Ø 6,5 mm (0.256 inch) Ø 5,5 mm (0.216 inch) EC EM L = 250 mm (9.82 inch) L = 25 mm (9.65 inch) PROTECTIVE CAPS FOR PLUG FC Nylon rope FM Stainless steel chain Ø 6,5 mm (0.256 inch) Ø 5,5 mm (0.216 inch) FC FM L = 250 mm (9.82 inch) L = 25 mm (9.65 inch) SHELL PLATING P X Black passivation - 250 H Salt Spray - Conductive Black anodizing - 500 H Salt Spray - Non Conductive SHELL SIZES 16S - 18-20 - - 2-28 - 32-36 - 0 BFMX18 Protective cap for plug with stainless steel chain for shell size 18 - Plating : black anodizing SERIES /// SIGNAL CONNECTORS
Safety Instructions Ensure cables and contacts withstand the electrical and environmental characteristics of your application. Always use tools recommended in this catalog or on the assembly drawings. Check connector assembly and wiring before switching power on. It is recommended that the termination of all electrical equipment be undertaken only by suitably trained and qualified personnel. To ensure the safe and efficient operation of connectors, the relevant operations manual must be followed, please consult us. Do not disconnect under voltage. In doubt, please contact us. PAGE 1
NOTES SERIES /// SIGNAL CONNECTORS
NOTES PAGE 3
FOR MORE INFORMATION Follow us on Twitter for all the latest product news @TEConnectivity, and on Facebook, TEConnectivity. TECHNICAL SUPPORT te.com/support-center North America...+1 800 5 6752 Asia Pacific...+86 0 00 820 6015 Austria... +3 1 905 601 8 Baltic Regions...+6 8 5072 5000 Benelux...+31 73 626 999 Czech Republic...+20 800 701 62 France...+33 1 3 20 86 86 Germany...+9 6251 133 1999 Hungary...+36 809 87 0 Italy...+39 011 01 2632 Nordic...+6 8 5072 5000 Poland... +8 800 702 309 Russia...+795 790 790 2 Spain/Portugal...+3 93 2910366 Switzerland...+1 52 633 66 26 United Kingdom...+ 800 267 666 te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 2017 TE Connectivity Ltd. family of companies All Rights Reserved. CATALOG Tyco Electronics UK Ltd. Faraday Road, Dorcan, Swindon, Wiltshire, SN3 5HH Tel 01793 528171 www.te.com 1-17739-3 08/17 Original SERIES /// SIGNAL CONNECTORS