REQUEST FOR QUOTATION CITY OF PORT HURON 100 McMorran Boulevard Room 217 Port Huron Michigan 48060 Phone: (810) 984-9728 Fax: (810) 982-7872 DATE: 5/19/2017 BID OPENING DATE May 30, 2017 TIME 3:00 p.m. Quotations are requested for furnishing the items described below, in accordance with the terms set forth herein. All quotations must be F.O.B. destination and include cost of boxing and cartage to delivery point below. In submitting your bid, remember that the City of Port Huron is EXEMPT FROM ALL FEDERAL AND STATES TAXES. QUANTITY/UNIT DESCRIPTION McMorran Place is requesting bids for plumbing for all the restrooms in the McMorran Main Arena. LIST LSUM DISCOUNT The bid includes work start to finish include all labor and material to update all plumbing fixtures in Main Arena. The fixtures that should be included in the bid are all (4) public rest rooms and all locker room fixtures. This includes working shut off valves if needed at each fixture as well. All bids should include two options. Option #1 Repair existing faucets with Chicago Faucet Repair kits Option #2 See Attached or equivalent or better product Option #3 See Attached or equivalent or better product Project must be completed in coordination with McMorran Operation Manager and work must be done between the months of June 15t h and August 10th. Proper insurance must be provided. Vendors should contact Rob Churchill at 985-6166 with any questions or to have a
complete walk thru of areas that should be included in bid. TOTAL BID DELIVERY REQUESTED DELIVERY POINT PURCHASING AGENT ROBERTA J. SEPPO CONDITIONS 1. ALL QUOTATIONS MUST BE SIGNED. Enclose in an envelope plainly marked "BID". 2. In submitting the above, the vendor agrees that acceptance of any or all quotations by the purchasing office within a reasonable period constitutes a contract. 3. Right is reserved to reject any or all bids, or to accept separate items in a bid, unless the right is denied by bidder. 4. In case of default, the municipality may procure its supplies from other sources, and hold the original bidder or contractor liable for resulting increased costs. 5. Samples, if requested, must be furnished at bidders expense and, if not destroyed in testing, or retained as a standard, will be returned on same terms, if requested. 6. The purchasing Agent reserves the right to increase or decrease by ten per cent the quantities of any item or items ordered. NOTICE: QUOTATIONS ON ANY FORM OTHER THAN THIS WILL NOT BE CONSIDERED. COMPANY NAME: AUTHORIZED SIGNATURE: TITLE: DATE:
MECHANICAL FAUCETS 404-VE2805-665ABCP Manual Faucets OPTION 2 CHICAGQ FAUCETS a GOMM:000aq Product Type Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water Metering Sink Faucet Job Name Features & Specifications Item Number 8" Fixed Centers 0.5 GPM (1.9 L/min) Vandal Proof Non-Aerating Spray 1-3/4" Vandal Proof MVP Metering Push Handle MVP Metering Adjustable Cycle Time Closure Cartridge 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser 5" Center to Center Rigid Cast Brass Spout ECAST design provides durable construction with total lead content equal to or less than 0.25% by weighted average CFNow! Item Ships in 3 Days Performance Specification Rated Operating Pressure: 20-125 PSI Rated Operating Temperature: 40-140 5F Section/Tag Model Specified Architect Engineer Contractor [ ] Submitted as Shown [ ] Submitted with Variations Date Warranty Lifetime Limited Faucet Warranty 5-Year Limited Cartridge Warranty 1-Year Limited Finish Warranty Codes & Standards ASME A112.18.1/CSA B125.1 Certified to NSF/ANSI 61, Section 9 by CSA California Health and Safety Code 116875 (AB1953-2006) Vermont Bill S.152 NSF/ANSI 372 Low Lead Content ADA ANSI/ICC A117.1 CALGreen ECAST ECAST products are intended for installation where state laws and local codes mandate lead content levels or in any location where lead content is a concern. C c4- US LPN L.LAP GMT., Last Revision: 07/25/2011 Date Printed: 10/18/2016 Product specifications subject to change without notice 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com
, 404-VE2805-665ABCP Manual Faucets CHICAGO 4,0F, FAU CETS a Merit cemany Architect/Engineer Specification Chicago Faucets No. 404-VE2805-665ABCP, Sink Faucet for hot and cold water, metering, concealed deck-mount with 8" fixed centers, chrome plated. Rigid, cast brass spout, 5" center-to-center. 0.5 GPM (1.9 Umin) vandal-proof, pressure compensating, Econo-Flo, non-aerating spray. 1-3/4" metal, vandal-proof, push handles with blue and red index buttons. MVP self-closing, auto-timed metering cartridge, adjustable run time from 2 to 15 seconds, opens with push, 0.20 max gallon/cycle. 1/2" NPSM supply inlets and coupling nut for 3/8" or 1/2" flexible riser. ECAST construction with less than 0.25% lead content by weighted average. CALGreen compliant. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content, and California Green Building Standards Code (CALGreen). H Imp... 2 (511 MI me APINIINI CMCM Mr= 1=111 01.1/4 le:= 11:7 11=1 1==m MI= 951 11=== [321 m=m M=11 [251 m==m MOM MI a i.mo a Una IIII hal 111 I 111 111 BEM I 1111111..a, M... 118 in It ii 101 4.-1 11021 8 (203) FRONT VIEW 1-02-3/8 1601 I-3/8 [351 MAXIMUM WARE THICKNESS I/2 NM COUPLING NUT FOR 3/8 OR I/2 FLEXIBLE RISER Operation and Maintenance [130) SIQE VIEW Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicaaofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. Last Revision: 07/25/2011 Date Printed: 10/18/2016 Product specifications subject to change without notice 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com
ZURN. OPTION 3 Z6913-XL AquaSense Battery Powered Faucet Engineering Specification AquaSense TAG Shown with -CP4 option ADA compliant, battery powered, chrome plated sensor faucet for retrofit and new construction. Flow Rate 1.5 gpm Vandal Resistant Aerator Occupant Detection Infrared convergence-type proximity sensor Thirty Second Time out feature )"-- Spout module Chrome Plated Cast Brass Also Includes In-line filter 4 "AA" batteries Inlet for a 1/2113] ball riser Single supply hose Flow Control Options: Slim Flow Outlets -FS 0.5 gpm/1.9 Lpm Vandal-Resistant Non-Aerated -JS 1.5 gpm/ 5.7 Lpm Vandal-Resistant Laminar Flow -LS 1.0 gpm/ 3.8 Lpm Vandal-Resistant Aerated -MS 0.35 gpm/1.3 Lpm Vandal-Resistant Non-Aerated *NOTE: Old style flow outlets also available. Power Supply Choices (Sold Separately) wasiatagaseameizairr -ACA 6 VDC Plug-In Power Converter -HW6 Hardwired Power Converter Optional Power Supply Accessories -CWB Connector Wire for Hardwire Install -MJ Mini Junction Box NOTE: For Hardwire applications furnish P6000-HW6 power converter. Order P6000-HW6 power converter seperately. The P6000-HW6 and P6000-MJ will power up to 8 sensor faucets. The information contained in this document is subject to change without notice. Please contact Zum for most up to date information. Accessories -ADM -ADM-1 -ADM-2 -CG -CP4 -CP8 -DSA -H4 -MT -MV -SH -TMV -TMV-1 - Above Deck Mixer Above Deck Mixer w/4" Cover Plate Above Deck Mixer w/8" Cover Plate CareGuard Aerator Cover Plate 41102] Centers Cover Plate 81203] Centers Drug Screening Applications Wrist Blade handle for ADM Mixing Tee Temperature Mixing Valve Supply Hoses for Mixing Valve Thermostatic Mixing Valve for Multiple Faucets Thermostatic Mixing Valve for Single Faucets Other Careguard currently only available with -E, 1.5 Vandal Resistant Laminar Aerator. Zum Lead Compliant products (-XL) are manufactured to comply with state laws and local codes that mandate lead content levels less than one quarter of one percent (0.25%) total lead content by weighted average. ZLIRN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330 Phone:1-800-997-3876 r Fax: 919-775-3541 vvvvmzum.com In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905-405-8272 Fax:905-405-1292 AquaSense is a registered trademark of Zum Industries, LLC. Rev. B Dwg. No. 310889 Architectural/Engineering Approval Date:10/10/2014 Product No. Z6913-XL
TYPICAL Z6913 AquaSense Battery Powered Faucet NOTE: Recommended through hole diameter to properly mount the spout/shank is 1-1/8" to 1-1/4". TYPICAL Z6913-ACA AquaSense Plug-In Powered Faucet FAUCET SPOUT W/ SENSOR ELECTRONICS MODULE W/ SOLENOID 44 [120] - 16 [160] 7 5 [186] 61-6 [160] 3 68 [163] 6 [163] 2 [5 1] Optional Mixing Valves BRASS MIXING TEE m COMPRESSION NUTS BRASS FERRULE FILTER HOUSING -BACK CHECK U A J r I a P6900-MT Mixing Tee 3/8 COPPER TUBE (EY 011-IER5) PLASTIC FERRULE are P6900-MV Temperature Mixing Valve 411 16 [119] ACA PLUG IN POWER CONVERTER 5 [118] TYPICAL Z6913-CWB AquaSense Hardwire Powered Faucet Optional: * Optional -MJ mini junction box for connecting up to 8 faucets NOTE: MUST USE EITHER ZURN P6000-HW6 HARDWIRE POWER CONVERTER OR ZURN P6000- ACA PLUG-IN POWER CON- VERTER TO ENSURE PROPER OPERATION. USING A POWER CONVERTER OTHER THAN ZURN MAY RESULT IN OPERA- TION MALFUNCTION OR UNIT FAILURE. [118] CWB CONNECTING WIRE (LENGTH 7ft.) * OPTIONAL MINI JUNCTION BOX DC COMMON (GND) (SOLID BLACK) +7VDC (BLACK W/ STRIPE) P6000 HW6 POWERS UP TO 8 FAUCETS EQUIP. GND (GREEN) NEUTRAL (WHITE) 115 VAC (BLACK) EXTENSION WIRE NOT PROVIDED (ORDER FROM OTHER SUPPLIER) RECOMMEND TYPE CMP, CMR, CMX, OR OTHER UL CATAGORY TYPE CABLE (22-18AWG) TO MEET INSTALLATION AND CODE REQUIREMENTS. AquaSense is a registered trademark of Zum Industries, LLC.