WRAP UP THIS CHRISTMAS! To: 10.8V Combination Pack PACK232 To: 12V Drill Driver 299 Includes DS10DFL Driver Drill, GP10DL Mini Grinder, 42 Accessories, 2 x 1.5Ah Li-ion Batteries with MPC, Charger And Carry Case DS12DVC Includes 2 x 1.2Ah Batteries, Charger and Carry Case 10mm Keyless Chuck Lightweight At 1.3kg 42 accessories 139 included 2x batteries included From: To: 3.6V Drill Driver 159 DB3DL2 Includes 2 x 1.5Ah Li-ion Batteries, Charger And Carry Case 6.35mm Hex Drive Lightweight & Compact at 0.45kg Built in Overload Protection To: 2 Piece Corded Combination Pack From: PACK234 Pack Includes: DV16VSS Impact Drill, G10SR3-BP Angle Grinder Pack, 2 x Carry Cases And Site Bag 199 From: Hitachi's Christmas Sale Oct - Dec 2011 From:
18V Slide Li-ion Range Hitachi s brushless motors are designed to make maximum use of battery energy. They work up to 30% longer per charge than conventional models. It s due to no energy loss through friction resistance, heat or sparking. This also provides a significant increase in power, providing a greater capacity to handle bigger workloads. 18V Slide Reciprocating Saw CR18DSL Blade Can Be Loaded In Upward Or Downward Direction Tool-less Blade Change External Access To Carbon Brushes 18V Slide Wet & Dry Vacuum R18DSL(H4) Batteries & Charger Sold Separately 699 99 Capable of Approx. 29mins Continuous Run Time When Using 3.0Ah Battery Semi Transparent Dust Case Lightweight At 1.5kg (With 3.0Ah Li-ion Battery) The brushless motors are also smaller in size making the tools more compact and lightweight. For more info on Hitachi's Brushless Range scan this QR reader on your mobile device Also available: Naked CR18DSL(H4) 299 * Only Available Naked Once they re fully charged, they re ready to work longer. 18V Slide Circular Saw C18DSL 165mm Blade With Cutting Capacity Up To 57mm Electric Brake And Magnesium Blade Cover 699 18V Slide 115mm Angle Grinder G18DSL Compact, Slim, Soft Grip Body And Lightweight At 1.8kg Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries 579 Also available: Naked C18DSL(H4) 299 Also available: Naked G18DSL(H4) 179 18V Slide Jigsaw CJ18DSL 18V Slide Blower & Vacuum RB18DSL(H4) Three Mode Orbital Action Or Straight Cut Tool-less Blade Change Integrated Dust Blower Batteries & Charger Sold Separately Capable of Approx. 19mins Continuous Run Time When Using 3.0Ah Battery Can Be Converted To Vacuum With Optional Accessory: Dustbag 323587 Lightweight At 1.7kg (With 3.0Ah Li-ion Battery) 109 599 Also available: Naked CJ18DSL(H4) 269 * Only Available Naked
18V Slide Li-ion Range 18V Slide Driver Drill DS18DSFL 18V Slide Compact Drills DS/DV18DSL 18V Slide Impact (Hammer) Driver Drill DV18DBL Steel Belt Hook 339 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 57Nm Hard Torque 469 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required Also available: - Naked DS18DSFL(H4) 139 - DV18DSFL 349 / Naked DV18DSFL(H4) 149 499 DV18DSL Impact (Hammer) Driver Drill Also available: - 'Naked' DV18DSL(H4) 259 - 'Naked' DS18DSL(H4) 249 Compact & High Power DS18DSL Driver Drill 649 Also available: Naked DV18DBL(H4) 299 18V Slide Rotary Hammer Drill DH18DSL 18V Slide Impact Wrench WR18DBDL 18V Slide Driver Drill DS18DBL SDS Plus Chuck With 16mm Max Drilling Capacity Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits 250Nm Tightening Torque 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous 699 729 629 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required Also available: Naked DH18DSL(H4) 299 Also available: Naked WR18DBDL(H4) 319 Also available: Naked DS18DBL(H4) 289 18V Slide Impact Driver WH18DSAL 18V Slide Impact Driver WH18DSL 18V Slide Impact Driver WH18DBDL 145Nm Tightening Torque Lightweight At 1.5kg Steel Belt Hook 145Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Steel Belt Hook 165Nm Tightening Torque 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous 419 699 729 Also available: Naked WH18DSAL(H4) 159 Also available: Naked WH18DSL(H4) 299 Also available: Naked WH18DBDL(H4) 319
18V Cassette Li-ion Range Hitachi Li-ion batteries have a multiple protection circuit fitted that monitors every cell in the battery. This protects the battery and tool by providing overload protection which stops the tool instantly in the event of a jam or overload. It gives over charge and over discharge protection which ensures the battery life is extended. Plus, the multiple protection circuit provides over heating protection that will shut the tool down to avoid excess heat. Every cell in every battery has multiple protection. 18V Cassette Reciprocating Saw CR18DL AM/FM Radio UR18DSL(H4) Blade Can Be Loaded In Upward Or Downward Direction Tool-less Blade Change External Access To Carbon Brushes 699 Also available: Naked CR18DL(H4) 299 18V Cassette Circular Saw C18DL 165mm Blade With Cutting Capacity Up To 57mm Electric Brake And Magnesium Blade Cover Base Plate Fine Angle Adjustment Includes AC Adaptor Compatible With All Hitachi 9.6V - 18V Slide & Cassette Batteries (Excluding 10.8/12V Peak) Compatible With ipod, MP3 And CD Players 199 * Only Available Naked 699 99 18V Cassette Wet & Dry Vacuum Batteries & Charger Sold Separately R18DL(H4) Capable of Approx. 29mins Continuous Run Time When Using 3.0Ah Battery Semi Transparent Dust Case Lightweight At 1.5kg (With 3.0Ah Li-ion Battery) Also available: Naked C18DL(H4) 299 * Only Available Naked 18V Cassette Jigsaw CJ18DL 18V Cassette Blower & Vacuum RB18DL(H4) Multiple Protection Circuit Heat Sensor Three Mode Orbital Action Or Straight Cut Tool-less Blade Change Integrated Dust Blower Batteries & Charger Sold Separately Capable of Approx. 19mins Continuous Run Time When Using 3.0Ah Battery Can Be Converted To Vacuum With Optional Accessory: Dustbag 323587 Lightweight At 1.7kg (With 3.0Ah Li-ion Battery) Air Vents For Cooling Between Cells Slide Battery BSL1830 Padded Protection For Base Of Battery Also available: Naked CJ18DL(H4) 269 599 109 * Only Available Naked
18V Cassette Li-ion Range 18V Cassette Rotary Hammer Drill DH18DL 18V Cassette Impact (Hammer) Driver Drill DV18DFL 18V Cassette Impact (Hammer) Driver Drill DV18DL SDS Plus Chuck With 16mm Max Drilling Capacity Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits 699 Lightweight At 1.6kg Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 349 619 Also available: Naked DH18DL(H4) 299 Also available: Naked DV18DFL(H4) 149 Also available: Naked DV18DL(H4) 279 18V Cassette 115mm Angle Grinder G18DL 18V Cassette Driver Drill DS18DFL 18V Cassette Driver Drill DS18DL Compact, Slim, Soft Grip Body And Lightweight At 1.9kg Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries 579 13mm Single Sleeve Keyless Chuck Lightweight At 1.7kg Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 339 599 Also available: Naked G18DL(H4) 179 Also available: Naked DS18DFL(H4) 139 Also available: Naked DS18DL(H4) 269 18V Cassette Impact Wrench WR18DL 18V Cassette Impact Driver WH18DFL 18V Cassette Impact Driver WH18DL 150Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Belt Hook With LED Light 130Nm Tightening Torque Lightweight At 1.5kg Belt Hook With LED Light 150Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Belt Hook With LED Light 699 419 699 Also available: Naked WR18DL(H4) 299 Also available: Naked WH18DFL(H4) 159 Also available: Naked WH18DL(H4) 299
14.4V Slide Li-ion Range Every brushless motor has an electronic switch which requires less current draw and 50% less effort. It means that the life of the battery and switch is extended because of the lower electric load. A rotational speed selector is fitted which allows you to accurately select a speed via a circuit board beneath the grip. 14.4V Slide Impact (Hammer) Driver Drill DV14DBL 14.4V Slide Impact Driver WH14DBDL 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required 529 160Nm Tightening Torque 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous 549 The brushless motor Impact Driver and Wrench, also has an impact rate changeover switch. Plus, there s an ultra bright LED light on the control board which illuminates dark work spaces. Get more battery life with the flick of a switch. Also available: Naked DV14DBL(H4) 259 Also available: Naked WH14DBDL(H4) 269 14.4V Slide Driver Drill DS14DBL 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required 499 14.4V Slide Impact Wrench WR14DBDL 235Nm Tightening Torque 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous 549 Also available: Naked DS14DBL(H4) 249 Also available: Naked WR14DBDL(H4) 269 Pneumatics Framing Nailer NR90AD DA Finish Nailer NT65MA4 Fires 50-90mm 34 Framing Nails Sequential & Bump Fire Trigger Tool-less Depth Dial Industrial Strength Top Housing 599 Fires 32-65mm DA Series Finish Nails Sequential & Bump Fire Trigger Integrated Air Duster Tool-less Depth Dial 479 New Design New Design
10.8V Li-ion Range 10.8V Angle Impact Driver WH10DCL(H4) 30Nm Tightening Torque Lightweight At 1.0kg Compact: 280mm Length / 55mm Head Height 55mm 299 10.8V Reciprocating Saw CR10DL Blade Can Be Loaded In Upward Or Downward Direction Tool-less Blade Change 349mm 10.8V Driver Drill DS10DFL 10mm Single Sleeve Keyless Chuck Lightweight At 1.0kg 188mm 280mm 299 199 210mm * Only Available Naked ** Battery Sold Separately Also available: Naked CR10DL(H4) 139 Also available: Naked DS10DFL(H4) 99 Mini Grinder Accessory Sets 753948 / 753949 753949 397 Piece Mini Grinder Accessory Set 753948 200 Piece Mini Grinder Accessory Set Both kits contain high quality 1/8 (3.2mm) shaft diameter bits which are compatible with the Hitachi GP10DL and the majority of competitor mini grinders 10.8V Mini Grinder GP10DL Includes 2 x 1.5Ah Li-ion Batteries with MPC, 42 Accessories, Compact, Slim, Soft Grip Body Lightweight At 0.48kg Anti-Start Safety Override When Replacing Batteries 208mm 249 10.8V Impact Driver WH10DL 105Nm Tightening Torque Lightweight At 0.9kg 139mm 269 204mm Also available: Naked GP10DL(H4) 129 Also available: Naked WH10DL(H4) 139 Pneumatics C Series Finish Nailer NT65M2 C1 Series Finish Nailer NT50AE2 Narrow Crown Stapler N3804AB3 Fires 25-65mm C Series Finish Nails Sequential & Bump Fire Trigger Integrated Air Duster Tool-less Depth Dial New Design Fires 15-50mm C1 Series Finish Nails Sequential & Bump Fire Trigger Tool-less Depth Dial Also available: 15-32mm C1 Series Nailer NT32AE2 169 New Design Fires 13-38mm 6000 Series Narrow Crown Staples Sequential & Bump Fire Trigger Tool-less Depth Dial New Design 299 219 179
Drilling Demolition Hitachi's H65SB2 1400 Watts of Power Impact Rate of 1400bpm 42 Joules of Impact Energy Soft Grip Shock Absorbing Rear Handle Standard With Point And Chisel 13mm Impact Drill 550W Motor Reversible With Variable Speed DV13VSS 16mm Impact Drill 600W Motor Reversible With Variable Speed 109 119 DV16VSS Hitachi's H65SB2 Now with Mobile Case 18mm Impact Drill 690W Motor Aluminium Housing Variable Speed With Reverse DV18V Drill With Safety Clutch 790W Motor 2 Speed Gearbox 40mm Wood Capacity Variable Speed With Reverse D13VB3 229 399 BONUS 1 x Site Bag 16.5KG Demolition Hammer H65SB2 20mm Impact Drill DV20VB2 Includes 1 x Chisel, 1 x Point and Case 1400W Motor 42 Joules Impact Energy 30mm Hex Drive 730W Motor 2 Speed Gearbox Variable Speed With Reverse 13mm Keyed Chuck 1249 299 NOW WITH NEW CASE!
Wood Work 305mm Slide Compound Saw with Laser C12RSH 216mm Slide Compound Saw C8FSE 255mm Compound Mitre Saw C10FCE2 1520W Motor 107 x 312mm Cutting Capacity With Zero Clearance Slide Structure 1050W Motor 75 x 262mm Cutting Capacity With Positive Mitre Stops 1520W Motor 89 x 101mm Cutting Capacity With Positive Mitre Stops Also available: 305mm Slide Compound Saw with Laser Marker and Digital Readout C12LSH 1149 Also available: 216mm Slide Compound Saw with Laser Marker & LED Light C8FSHE 899 999 849 399 Also available: 255mm Compound Mitre Saw with Laser Marker C10FCH2 439 125mm Random Orbital Sander SV13YB 1/3 Sheet Orbital Sander FSV10SA 12mm Single Speed Router M12SE 230W Motor Lightweight At 1.4kg High Dust Collection Velcro Pad & Clamp System Includes Punch Plate & Dust Bag Lightweight At 1.3kg 1700W Motor Lightweight At 5.3kg 3 Way Adjustable Handle Also available: 125mm Variable Speed Orbital Sander SV13YA 179 149 119 Also available: 12mm Variable Speed Router M12VE 449 339 165mm Circular Saw C6MFA 185mm Circular Saw C7SB2-K 235mm Circular Saw C9SA2 1010W Motor Aluminium Base 57mm Depth Of Cut Also available: 190mm Circular Saw C7MFA 169 159 Includes 2 x Blades 1710W Motor Lightweight At 4.6kg Aluminium Base With 60mm Depth Of Cut 259 2000W Motor Lightweight At 6.8kg Aluminium Base With 86mm Depth Of Cut 319
Wood Work Hitachi's G13YF & G13VA Grinders Wet & Dry Automatic Dust Extractor 1200W Motor 24L Liquid Capacity 22L Dry Dust Capacity RP30Y Wet & Dry Automatic Dust Extractor 1200W Motor 15L Liquid Capacity 14L Dry Dust Capacity WDE1200 719 619 1430 Watts of Power Overload Protection Soft Start Constant Speed Control Kick Back Protection Zero Voltage Restart Anti Vibration Side Handle Tool-less Wheel Guard 82mm Planer P20SB(TCT) 180mm Sander Polisher SAT180 Hitachi's Powerful 125mm Angle Grinder 500W Motor Lightweight At 2.5kg Dial Adjustable Cutting Depth Up To 1.0mm Also available: 82mm HSS Planer P20SB 229 229 950W Motor Lightweight At 2.9kg 2 Speed Dust Sealed Unit 359 256mm Table Saw C10FL 305mm Compound Mitre Saw with Laser C12LCH 1600W Motor 1030 x 690mm Table Solid Cast Table with Mitre Gauge and Rip Fence 1520W Motor 63.5 x 200mm Cutting Capacity Digital Display 1699 779
Metal Work 100mm Angle Grinder Pack G10SR3 - BP 125mm Angle Grinder G13YF 125mm Angle Grinder G13SB3 Pack Includes: 730W Angle Grinder, 3 x Cutting Wheels, 1 x Grinding Wheel, 1 x Diamond Wheel, 1 x Tape Measure & Carry Case 99 1430W Motor Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart Tool-less Guard 1300W Motor Anti Vibration Side Handle Tool-less Guard 369 279 BONUS 1 x 125mm Diamond Wheel 100mm Angle Grinder Cutting Pack G10SR3-CWP 125mm Variable Speed Angle Grinder G13VA 125mm Angle Grinder with Paddle Switch G13SE2 Pack Includes: 730W Angle Grinder With 10 x Cutting Wheels, 1 x Grinding Wheel, 1 x Tape Measure & Carry Case Also available: 125mm Angle Grinder Cutting Pack G13SR3-CWP 129 1430W Motor Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart Tool-less Guard 1200W Motor Anti Vibration Side Handle & Dead Man Switch Tool-less Guard Also available: 115mm Angle Grinder With Paddle Switch G12SE2 259 399 299 109 BONUS 1 x 125mm Diamond Wheel 180mm Angle Grinder G18SE3 230mm Angle Grinder G23SE2 355MM Cut Off Machine CC14SF 2400W Motor Anti Vibration Side Handle Tool-less Guard 2400W Motor Anti Vibration Handle Tool-less Guard 279 299 2400W Motor Quick Change Vice Sturdy Aluminium Housing Spark Diversion Guard External Access To Carbon Brushes 449
Wrap Up This Christmas! 12V Driver Drill Kit DS12DVF3 14.4V Driver Drill Kit DS14DVF3 18V Driver Drill Kit DS18DVF3 Includes 2 x 1.5Ah Ni-Cd Batteries, Bit Set, Torch, Charger & Carry Case 10mm Keyless Chuck Lightweight At 1.5kg Includes 2 x 1.5Ah Ni-Cd Batteries, Bit Set, Torch, Charger & Carry Case 10mm Keyless Chuck Lightweight At 1.8kg Includes 2 x 1.5Ah Ni-Cd Batteries, Bit Set, Torch, Charger & Carry Case Lightweight At 2.0kg 189 229 269 Includes Torch & Bit Set Includes Torch & Bit Set Includes Torch & Bit Set Jigsaw Blades Pack 750049 3 Piece Socket Adapter Set 751970 82mm TCT Planer Blades Includes 10 Blades in Plastic Case Assortment of Timber and Metal Applications 1) ¼ Hex. Drive to 1/4 Square Drive 2) ¼ Hex. Drive to 3/8 Square Drive 3) ¼ Hex. Drive to 1/2 Square Drive 750470-2 x 82mm TCT Planer Blades 750471-10 x 82mm TCT Planer Blades Reciprocating Saw Blade Pack 752049 41 Piece Socket Set 752500 Diamond Wheel Pack 797130 Includes 12 Blades in a Roll Up Satchel Assortment of Timber and Metal Applications Includes 10 Impact Sockets, 28 Hex. Driver Bits & 3 Adaptors Includes 3 x 105mm Wheels 1) Continuous Rim - Ideal for Porcelain Cutting 2) Segmented Rim - Ideal for Concrete Cutting 3) Turbo Rim - Ideal for All Purpose Fast Cutting DISCLAIMER Prices effective from the 01/10/2011 to 31/12/2011 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice. Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by participating retailers. www.hitachi-powertools.com.au Find Us On Facebook To contact Hitachi scan this QR reader on your mobile device