UP TO 75% ENERGY SAVINGS 00W-00W HID Light Replacement 100W to 00W Up to 10Lm/W 5 Year Easy Warranty Maintenance Ceiling Mount Wall Mount Hanging Mount IP Rating Key Features 5000190 Image Show LCP 1.5 years warranty.with most suitable beam angle 0 90 and 10 3.Original Philips SMD 3030 which up to 10Lm/W 4.With the best quality meanwell driver HBG series 5.They are assembled by module light weight aluminum fin.unique designed UFO shape, lighter and smaller..ip5 waterproof,dust-proof,explosion-proof and anti-corrosion 7.Using aluminum fin heat sink which heat transfer faster than die cast 8.Tiny package and lighter,lower freight cost,more competitive in the market 9.Avaialble for warehouse,tunnel lighting,advertisement,gas station and factory lighting etc 1
Dimensions 150mm 70mm 1mm 80mm 150W Photometrics 0 90 10
150W 10Lm/W Technical Specifications Optical Light source Lumen output (default) Colour rendering index (CRI) Correlated colour temperature (CCT) Luminaire Efficacy Electrical Power consumption (W) Operating frequency Operating voltage range Power factor Driver type Driver efficiency Dimmable(Optional) Environmental IP rating Weight Ambient operating temperature range Material composition (body) Material composition (diffuser) Expected lifespan Controls - Optional Philips 3030 4000 Lumen Ra>70 3000K/4000K/4500K 5000K/5700K/500K Up to 10 lm/w 150W 50/0Hz 100-77VAC >0.95 Meanwell HBG >90% YES IP5 3.50Kg -45ºC to +50 C Aluminum fin PMMA >54,000 hours @L80 With US & Aus & Euro Plug Hook Warranty 1pc per box Box Size :34*34*cm Gross weight:.5kg 4pcs per carton Box Size :70*37*45cm Gross weight: 11.kg 5
Feature 1.0mm Aluminum fin Faster cooling Aluminum fin heat sink IP5 waterproof load hook load hook MeanwellDrive power Philips 3030 LensPMMA Beam Angle0 / 90 / 10 Replacement Table Installation Type Ceiling mounted Hook mounted 100W 10W 150W 150Lm/W 150W 10Lm/W 00W Metal Halide High Bay Light 50W 350W 450W 500W 00W * Details refer to page 11-1 8
Hooks 1 Cord (1M) Material: nickel-plated chains Diameter of the chains: 7.5mm Hooks pcs Cord 1pcs (1m) U bracket The maximum adjustable angle of the bracket is 70 degree The diameter of the mounting bracket fixing hole is 10mm E40 base External driver Mogul Base E40 E39 8
Microwave Motion Sensor Dimming Function 3-step dimming function Lamps in corridor are controlled by several sensors. Once any motion is detected by one of sensors, the motion signal will be transmitted to other sensors connected together. Then, all lamps switch on at the same time, instead of switching on the lamps in the area where motion is detected. sensor slave slave sensor slave sensor 1 No motion detected, all lamps switch off. 1 sensor slave slave sensor slave sensor Any movement is detected from any direction, all lamps synchronously switch on. sensor slave slave sensor slave sensor 1 3 3 No motion is detected in detection area, all lamps synchronously dim to a low light level after hold time. 3 sensor slave slave sensor slave sensor 4 After stand-by period, the lamps switch off if no movement is detected in the detection zone. 4 ON -OFF Function Motion sensor LED driver or ballast (Any brand) is an innovative motion sensor, switch on the light on detection of movement, and switch off after a hold time when there is no motion detected. As built-in daylight sensor can read brightness value, the sensor does not switch on the light if with suf cient natural light. With suf cient light, the lamp doesn't switch on. 1 3 With insuf cient ambient light, the sensor switches on the lamp when motion is detected. After hold time, the sensor switches off the lamp when no motion is detected. www.ledlmapshining.com 9 Email: sales@lampshining.com Skype: lampshining87
1 3 Daylight Harvesting When used in combination with Merrytek daylight sensor, the system has automated controls that either turn off or dim arti cial light in response to the available daylight in the space. Ambient light larger than preset illumination level (Set by 1-10V daylight sensor), the lamp keeps off. Ambient light below than preset illumination level, the lamp switches on when motion is detected. The lamp lights on 100% illumination or dims to maintain the preset illumination level against the level of ambient light. If with suf cient ambient light, the lamp turns off at once,even with motion trigger. If with insuf cient ambient light, the lamp dims to stand-by dimming level (Set in the motion sensor) when no motion detected ofter hold time, and then switches off after stand-by period. Detection Pattern 18 1 14 1 10 8 4 0 10% 100% 75% 5% 50% 10 1 14 1 18 10% 100% 75% 50% 5% 4 8 10 1 14 1 18 Wall mounting pattern (Unit: m) Suggested installation height: 1-1.8m Ceiling mounting pattern (Unit: m) Suggested installation height:.5-10m 10
The led Lamp manufacturer UFO LED High Bay Installation Manual Must be installed by a licenced electrician as per the latest AS-3000 wiring regulations Screw the Circular Ring Tightly Hang the Safety chain on the Hook input Juunction box LED Lock Circular Ring to the Safety Chain carefully Note: AC 100-77V Cable L N Brown Blue Green / Yellow Warning Please make sure the power off before opertion L-Brown N - Blue -Green/Yellow Then light up the lamp www.ledlmapshining.com 11 Email: sales@lampshining.com Skype: lampshining87
UFO LED High Bay Installation Manual Must be installed by a licenced electrician as per the latest AS-3000 wiring regulations 85.0mm Φ10mm 85.0mm or 3.15 in Expansion Screw Takes off the nut after expansion screws are well mounted For Reference Hammer Drill holes according to the outlet on the canopy light input LED Juunction box Tight the nuts to expansion screws Double check of all drilled holes are right position as canopy outlet before mounted.use a hammer to hit expansion crews tightly to ceiling,make sure it s not loose. Note: AC 100-77V Cable L N Brown Blue Green / Yellow Warning Please make sure the power off before opertion L-Brown N - Blue -Green/Yellow Then light up the lamp 1