PAVER CM F220T ENGINE Perkins 50 kw (68 Hp) OPERATING WEIGHT 4500 kg PAVING WIDTH Standard: 1200 2200 mm With extensions: 3000 mm Paving reductions: 500 mm
FOREWORD QUALITY, INNOVATION AND PASSION FOR EXTRAORDINARY RESULTS Our company pursues with paving operations from 50 cm to 300 Ease of access to any part for determination the objective of designing cm wide and, therefore, it represents maintenance, by means of two side Pavers combining the best technological the perfect solution for the paving of doors positioned on each side of the applications and attention to details with parkings, machine and by a hood which can be the requirements of the end users and lanes, winding mountain roads, trenches, with the new materials used in this field. sideways and cycle paths. In addition, it is The enthusiasm for our work has always characterized by the following features: urban streets, emergency accompanied us for over 40 years of activity in this sector and now, more than Several available screed configurations: with tamper or vibrator; with electric or A choice of the highest quality ever before, characterizes all design and components, directly from the best construction phases of our CM-branded Italian and European suppliers gas heating system Possible additional configurations to machines. The passion distinguishing our projects represents a real added value opened upwards answer any Customer s need. In-depth studies carried out in we are proud of and it certainly makes partnership with our Top suppliers of our Pavers unique. motors and drive components (Rexroth After thorough technical studies and and Perkins) to ensure high safety operating tests lasting several months, standards, preventing all danger levels the CM Paver model F220T is now ready from occurring in the proximity of the guaranteed both by our head office to satisfy any User s need in the road machine (EN ISO 13849-1 and EN ISO and by authorized dealers paving sector. Thanks to its compact 13849-2 Certifications) size and to the versatility of the screed Part Catalogue Assistance and maintenance Customized financial solutions (standard length: 120 cm 220 cm), A highly advanced drive system by supplying specific extensions and A highly technological, user-friendly reductions, the model F220T can perform Dedicated access to the Online Spare and easy servicing dashboard
FEATURES WHAT MAKES THE CM PAVER MODEL F220T OUTSTANDING? THE CM F220T HAS THE FOLLOWING DISTINGUISHING FEATURES: 1. Tracked machine, with steel chains and wear-resistant, rubber-bonded pads. 2. Lohmann planetary gearboxes for drive control, with oil-bath lubrication and Rexroth hydraulic motor, with negative hydraulic control brakes. Track tension with cylinder and grease accumulator. Two steering and tilting front wheels 3. Two independent control hoppers; vertical swing-out wings (option). Standard capacity: 4200 kg. 4. Hydraulically extendable screed, with electric or gas heating system, equipped with tamper or vibrator. 5. Compact transport dimensions: 4250 x 1200 x 1820 mm 6. Weight 4500 kg, easy loading and transport. 7. Tight inner turning radius: 1 meter.
POWER TRANSMISSION SYSTEM Perkins diesel engine (model404f-e22ta - EU Stage 3b - US EPA Tier 4f), power 50 kw (68 Hp) at 2800 rpm, water-cooled. Air-cooler type charge. Starting from 2020, Stage V engine. Pumps flanged on a coupler; every pump controls a track gearbox. The whole system is managed by a printed circuit board, which is controlled by potentiometers and joysticks adjusting the speed and the steering of the machine. An electric knob ensures the steering. BRAKES Hydrostatic service brake, controlled by the On-STby switch. Parking/emergency brake with negative hydraulic control. An emergency control placed on the dashboard stops all funcions of the machine and the engine, whereas two emergency buttons positioned sideways, on the screed end gates, stop all the machine functions in case of danger for the pedestrian operator.
FEATURES A NEW PAVING EXPERIENCE WITH CM F220T FEEDING The hopper can be loaded laterally with a mechanical loader. The swing-out side wings can increase the loading area. A stainless steel bar conveyor belt carries the material to the augers. Controlled by a single hydraulic engine, the two augers distribute the material over the entire width of the screed. A shovel switch automatically adjusts the flow of the material in front of the screed. On the conveyor, two gates that can be regulated and moved facilitate the distribution of the material in front of the screed. OPERATOR PLATFORM Stand-up driving position with dashboard and user-friendly, easy-access controls. Any control can be replaced by unqualified personnel too. This makes it simpler to carry out maintenance operations to the machine. The dashboard features a vandal-proof panel and a display to operate the functions of the engine and of all the machine components, with warning lights for maintenance.
SCREED By exploiting the same frame system, the machine can be equipped with four different types of screed, allowing production costs to be optimized: 1. Vibrating screed, with gas heating system (S220V/G). 2. Screed with tamper, with gas heating system (S220T/G). The gas heating is provided by atmospheric burners with ignition/extinction flame control by means of an electronic system, to guarantee the maximum safety. 3. Vibrating screed, with electric heating system (S220V/E) 4. Screed with tamper, with electric heating system (S220T/E). The whole electric heating system (3-phase 380-400V) is managed by a generator connected to a engine through a belt, and by an electronic control monitoring the operation and the temperature of the resistances fastened to the smoothing plates of the screed. Every phase of the generator current is checked to guarantee maximum safety to the whole system. The spread crowning MW can be varied through specific adjusters.
TECHNICAL SPECIFICATIONS TRACKED PAVER MODEL F220T BASIC TECHNICAL SPECIFICATIONS ENGINE Diesel Perkins Cooling Water cooled Variable speed From 0 to 3000 m/h Type 404F-E22TA - EU Stage 3b Service brake Hydrostatic US EPA Tier 4f (from 2020, Stage V engine) Parking brake Negative, multiplate, Power 50kW (68Hp) at 2800rpm buit into the gear units Diesel tank 70 l Hopper Two with independent control Swing-out side wings (option) Electrical system 12 V Push rollers Oscillating and reclining Tracks 4 pitch chain, 8 rollers on each side Capacity 4.2 t Idlers Grease piston with accumulator Inner hopper width 2650 mm Ground contact area 1600x180 mm Loading height 565 mm from the sides; 520 Steering Electronic mm from the centre Conveyor N 1 hydraulic-control, reversible strips with orbital motor and chain Augers Diam. 280 mm ps 250 mm Turns 60; No. 2 with independent and reversible control; hydraulically variable height from the ground (100 mm); with con On-Off sensors Drive system Hydraulic with closed circuit: n 2 pumps, n 2 gear motors, n 1 software Rexroth Total Weight 4500 kg Theoretical hourly output 200 t/h
TECHNICAL SPECIFICATIONS WITH TAMPER SCREED S220T Dimensions Hydraulically extendable base 1200 2200 mm Plate width 240 mm Plate thickness 10 mm Tamper 20x48 mm Tamper rpm 1650 rpm Tamper stroke 3 mm Central crowning Mechanical +4.5% - 2% Paving profile Heating M W - Electric 3-phase 400/230V - Gas with 4 burners with electronic ignition Extensions with Tamper Width 400 mm (from 2200 to 3000mm); electrically or gas heated, with augers and retaining tunnel Side end gates Adjustable
TECHNICAL SPECIFICATIONS WITH VIBRATING SCREED S220V Dimensions Hydraulically extendable base 1200 2200 mm Plate width 255 mm Plate thickness 10 mm Vibrator rpm 3100 rpm Central crowning Mechanical +4.5% - 2% Paving profile Heating M W - Electric 3-phase 400/230V - Gas with 4 burners with electronic ignition Extensions with Vibrator Width 400 mm (from 2200 to 3000mm); electrically or gas heated, with augers and retaining tunnel Side end gates Adjustable
DIMENSIONS: A 4265 B 3710 C 1525 D 1750 E 1410 F 890 G 1200 H 2200 I 2650 L 565 M 1840 OPTIONS AVAILABLE ON REQUEST: Hoppers with vertical swing-out wing for side loading Spread reductions to 500 mm 400 mm mechanical extensions for a max width of 3000 mm Night-time working headlights for tunnels and covered parking areas Heated end gates(in electric version only) Leveller supports and longitudinal and cross levellers of any brand Wash tank with pump and winder for ecological non-stick liquid Proportional, ultrasonic auger feed sensors Biological hydraulic oil System for road circulation Additional 220 Volt socket kit (in electric version only) Electro-hydraulically controlled crowning
Materials and specifications may be subject to change without prior notice. Featured machines in photos may include additional equipment. 2018 C.M. Srl All Rights Reserved C.M. Srl - Via della Cooperazione, 3-48017 - Conselice - Ravenna P.IVA / C.F. / Reg. Impr. RA 02008560399 - R.E.A. RA 163792 - Capitale sociale 500.000 i.v. Telefono +39 0545986611 - Fax +39 0545986620 - www.cmsrl.com / e-mail: cmsrl@cmsrl.com