Product Guide
These reasons speak for the products from Wacker Neuson. 1. Quality from Wacker Neuson brings performance straight to the point. We know the application areas of our products precisely. That is the basic requirement for the development of tailor-made solutions for our customers. Particularly convincing is the high degree of reliability of our machines and equipment in every application and that for many years. With Wacker Neuson, you can always rely on this. 2. Economic efficiency also belongs to a perfect work result. We integrate economic efficiency directly into our products. Beginning with the low-consumption engines developed by us, continuing with an intuitive operation and up to intelligent functions and equipping options with which you can equip machines and equipment from Wacker Neuson for the respective application in only a few seconds. 3. Our services place their focus on your requirements. You should fully concentrate on your business and your projects. Our services offer an important contribution to this end: Be it regarding financing, management or maintenance of your machines or equipment. And it is understood that we are personally available for any questions any time. Concrete technology Compaction Demolition Generators, pumps, lighting Excavators 04 14 22 24 30 Material Handling 36
Modular internal vibrators A5000/160 HMS Set 425* SM2-E SM4-E SM2-S SM5-S SM7-S SM9-S FLEXIBLE SHAFTS Length m 2 4 2 5 7 9 Weight kg 2.5 4.3 4.3 9.3 12.9 15.1 BASIC H25 H35 H45 H55 H65 VIBRATOR HEADS Diameter 25 35 45 57 65 Length 440 410 385 410 385 Weight kg 1.3 2.1 3.4 5.3 6.2 M2500 A5000/160 D 4000 DRIVE SYSTEM Drive system Double insulated universal motor Air-cooled, single cylinder, four-cycle, Honda gasoline engine Air-cooled, single cylinder, four-cycle, Yanmar diesel engine Voltage V 230 1~ Current A 7.8 Performance kw/hp 1.8 4/5.4 3.2 Weight kg 5.9 23.7 42.6 * The HMS-Set 425 consists of 1x Drive Unit M2500, 1x 45 Head H45 and 1x 5m Flexible Shaft SM5S 4
Internal vibrators Internal vibrators with integrated inverter PREMIUM IRFU 5 models INTERNAL VIBRATOR WITH INTEGRATED INVERTER IRFU30 IRFU38 IRFU45 IRFU58 IRFU65 IRSE-FU45 IRSE-FU57 Vibrator head diameter 30 38 45 58 65 45 57 Effective compression Ø* cm 40 50 60 85 100 60 85 Voltage V 220-240 1~ 220-240 1~ 220-240 1~ 220-240 1~ 220-240 1~ 220-240 1~ 220-240 1~ Current A 2.2 3.5 4.8 6 7.5 4.8 6 Operating Frequency Hz 200 200 200 200 200 200 200 Protection hose**/ Power cable IEC 3 models IRSE-FU 2 models m 15/15 15/15 15/15 15/ 15 10/15 0.8/15 0.8/15 IEC38 IEC45 IEC58 ADVANCED INTERNAL VIBRATOR WITH INTEGRATED INVERTER Vibrator head diameter 38 45 58 Effective compression Ø* cm Voltage V 220-240 1~ 220-240 1~ 220-240 1~ Current A 3 4 5 Operating Frequency Hz 50-60 50-60 50-60 Protection hose**/ Power cable m 15/15 15/15 15/15 6 * This is non-binding information based on the practical experience of our customers under certain operating conditions. This information may differ under certain conditions. We recoend first attempting trial concreting work under the operating conditions. ** Maximum protection hose lengths, various hose lengths available. Standard lengths: 5m.
External vibrators 2-series AR26 ARFU26 3,000 6,000 rpm 3.00 6.47 kn 6-series AR52 AR62 1,500 9,000 rpm 5.05 19.03 kn 5-series AR52 AR54 3,000 9,000 rpm 13.77 14.14 kn 7-series AR75 1,500 9,000 rpm 10.29 26.56 kn 8
Frequency converters FUE6 FUE M/S 75A FUE M/S 85A FREQUENCY CONVERTERS FUE6 42/200W FUE M/S 75A FUE M/S 85A FUE10 42/200W Weight kg 32.5 29.5 42 87 Input/output voltage V 230 1~/42 3~ 400/42 3~ 400/42 3~ 400 3~/42 3~ Input/output frequency Hz 50 60/200* 50 60/0 200 50 60/0 200 50 60/0 200 Input/output current A 14.8/53 13/75 13/85 24.5/145 Power cable m 2.5 2.5 2.5 3 * Version with 0 200 Hz available 10
Trowels CT48 CRT36-26A-WK MCT36-5 TROWELS RIDE-ON TROWEL CT24-4A MTC36-5 CT48-8A Operating weight kg 73 83 96* Screed diameter 610 915 1,220 Rpm range rpm 90-141 70-137 60-125 Pitch range* 0-15 0 15 0 30 Drive system Engine output at rpm kw rpm Air-cooled, single cylinder, 4-cycle, gasoline engine 2.9 3,600 CRT36-26A-WK Operating weight kg 373 Screed diameter 915 Rpm range rpm 25-165 Pitch range* 0 25 Number of blades Drive system 2x4 Air-cooled, single cylinder, 4-cycle, gasoline engine Air-cooled, single-cylinder, 4-cycle, gasoline engine 4.1 3,600 Air-cooled, single cylinder, 4-cycle, gasoline engine 6.2 3,800 Engine output at RPM kw rpm 16.6 3,600 * without handle 12
Raer Battery-powered raers 2-cycle raer 4-cycle raer Diesel raer 1 model 4 models 2 models 1 model AS50e BS50-2 BS60-2 BS50-2plus BS60-2plus Battery-powered raer 2-cycle raer RAMMER RAMMER Raing shoe size (W x L) 340 x 280 280 x 330 280 x 330 280 x 340 280x340 Operating weight kg 70 58/59 66 59 66 Stroke at Raing shoe 64 65 64 65 Max. percussion rate (rpm) 680 700 700 700 700 Type of engine Electric motor WM80 WM80 WM80 WM80 Raing shoe size (W x L) BS50-4As BS60-4As DS70 4-cycle raer Diesel raer 280 x 337 280 x 336 280 x 336 or 330 x 342 Operating weight kg 64 71 83 Stroke at Raing shoe 56 69 71 Max. percussion rate (rpm) 680 690 670 Type of engine GX120 GX120 L48 14
Single direction vibratory plates MP15 SINGLE DIRECTION VIBRATORY PLATES MP 15 Operating weight kg 80 Centrifugal force kn 15 Operating width 500 Frequency Hz 96 Engine Loncin G210F Engine Power at 3,600rpm kw 4.4 16
Reversible vibratory plates BPU5545A DPU3050H DPU6555H BPU3050A REVERSIBLE VIBRATORY PLATES BPU 3050A DPU 3050H DPU 4545H BPU 5545A DPU 5545H DPU 6555H 30 kn 45 kn 55 kn 55 kn 65 kn Operating weight kg 166 181 206* 402 425* 399-447* 399 447* 482-527* Centrifugal force kn 30 30 45 55 55 65 Operating width 500 500 604 604-750* 604-750* 710-860* Height (without drawbar) 746-856* 777-887* 777-887 790-914* 790-914* 861-1005* Frequency Hz 90 90 69 69 69 65 Engine Honda GX270 Hatz 1 B 30 Hatz 1 D 42S Hatz 1 D 42S Engine power Electric starter optionally available kw 5.6 (at 2,600 rpm) 4.2 (at 2,800 rpm) 6.4 (at 2,850 rpm) 6.4 (at 2,850 rpm) Hatz 1 D 42S 6.4 (at 2,850 rpm) Hatz 1 D 81S 9.6 (at 2,800 rpm) Not available Available Option * Weight depends on the additional options selected 18
Rollers RD27 WALK BEHIND ROLLERS RD7 Kind of roller RD7 pedestrian roller Operating weight kn kg 731-751/700/740 Centrifugal force kn 13 / 22 Drum diameter 420 Drum width 650 Engine Hatz diesel engine, Yanmar diesel engine or Honda gasoline engine RD 12A-90 RD 27-120 RIDE-ON ROLLERS Kind of roller Ride-on roller Ride-on roller Operating weight CECE kg 1,130 2,695 Max. operating weight kg 1,220 3,410 Max. operating width 1,035 1,250 drum width 90 1.200 Overlap at the side 55/55 Centrifugal force I/II kn 15/- 52/32 Engine Honda GX 630 Kubota D1503 Engine Power kw/hp 15.1/20.3 22.9/31.1 20
Breakers BH65 BH55RW GASOLINE DEMOLITION BREAKERS LxWxH (without attachment) 848 x 492 x 346 BH65 BH55rw 905 x 492 x 346 842 x 492 x 346 Weight (without attachment) kg 25 26 25 26 Tool holder Ø 27 x 80 hex 28 x160 hex 32 x160 Ø 27 x 80 898 x 492 x 346 hex 28 x160 hex 32 x160 Percussion rate rpm 1,250 1,250 1,350 1,350 Single stroke impact energy J 65 65 55 55 Rated power output kw 1.7 1.7 1.6 1.6 Tank capacity I 1.8 1.8 1.8 1.8 22
Lighting & Generators MG5 LTS8L ML440 GENERATORS Length Width Height MG5 (5.0 kva) 683 540 552 Weight (empty) kg 92 Frequency Hz 50 Engine Loncin 188FD LIGHT MAST Length Width Height ML440 LTS8L LTS4K 1,170 835 1,950 2,560 1,390 2,560 2,560 1,390 2,560 Light source height m 5 8.5 8.5 Metal vapor lamp type W 4 x 400 Metal Halide 4 x 1,000 Metal Halide 4 x 320 LED Tank capacity (fuel) l 25 Runtime h 8 24
Pumps PT3 MDP3 PT6 TRASH PUMP Intake and pressure pipe joints diameter Length Width Height MDP3 PT3A PT3H PT4A PT4H PT6LT PT6LS 80 75 75 100 100 152 152 688 528 572 675 505 570 675 505 570 Operating weight kg 67 64 73 163 180 1,028 1,028 Total head m 20 29 29 32 32 30.5 30.5 Max. discharge volume l/min 1,150 1,515 1,515 2,609 2,220 4,935 4,935 Max. solids diameter 25.4 38 38 50 50 50 50 915 875 875 915 845 875 2616 1778 1803 2001 895 1660 Engine manufacturer Loncin Honda Hatz Honda Hatz Kohler Kohler 26
Pumps PST2-400 1-SUBMERSIBLE PUMPS PST2-400 Breather tube diameter 50 Length Width Height 265 185 330 Operating weight kg 11.3 Total head m 12 Max. discharge volume l/min 200 Max. solids diameter 9.5 Voltage V 230 28
Track excavators ET16 ET20 TRACK EXCAVATORS ET16 Shipping weight kg 1,402-1,602 Operating weight kg 1,529-1,720 Engine output according to ISO Digging depth Max. dumping height Digging radius Length Width Height kw/hp 13.2/17.9 2,242 2,413* 2,371 2,518 3,700 3,861* 3,644 990 1,300 2,285 TRACK EXCAVATORS ET20 Shipping weight kg 1,862 2,182 Operating weight kg 2,005 2,324 Engine output according to ISO Digging depth Max. dumping height Digging radius Length Width Height kw/hp 13.4/18.2 2,483 2,683* 2,713 2,836* 4,129 4,317* 4,049 990 1,300 2,295** / 2,388 * Long dipper stick (option) Revolving superstructure tilting (15 ) * Long dipper stick (option) ** Option VDS 30
Track excavators 3503 2503 TRACK EXCAVATORS 2503 Shipping weight kg 2,483 2,794 Operating weight kg 2,639 2,950 Engine output according to ISO Digging depth Max. dumping height Digging radius kw/hp 19.4/26.4 2,620 2,824 2,925 3,080* 4,515 4,693* TRACK EXCAVATORS 3503 Shipping weight kg 3,425 4,108 Operating weight kg 3,602 4,286 Engine output according to ISO Digging depth Max. dumping height Digging radius kw/hp 23.7/32.2 3,230 2,536 3,620 3,926 5,270 5,582 Length Width Height 4,410 1,370 2,370 Length Width Height 5,201 1,620 2,393 * Long dipper stick (option) * Long dipper stick (option) 32
Track excavators EZ38 EZ53 TRACK EXCAVATORS EZ38 EZ53 Shipping weight kg 3,582 4,303 4,968 6,165 Operating weight kg 3,753 4,474 5,241 6,438 Engine output according to ISO Digging depth Max. dumping height Digging radius Length Width Height kw/hp 21.4/29 35.9/49.4 3,107 3,357* 3,317 3,516 5,300 5,535* 4,800 1,740 2,500 3,501 3,751* 3,678 3,943 5,987 6,233 5,500 1,990 2,570 * Long dipper stick (option) 34
Skid Steer Loaders SW20 SW16 SKID STEER LOADERS SW16* SW20* Operating Weight kg 2799 2920 Rated Operating Capacity @ 50 % kg 725 907 Engine Make Kohler Kohler Engine Model KDI 1903 TCR KDI 1903 TCR Engine Performance kw 36 36 Travel Speed Low / High km/h 12.9 / 19.3 12.9 / 19.3 Hydraulic Flow l/min. 76 76 Lift Type Radial Vertical 36 * Available with Cab or Canopy.
Wheel loaders 5055 5035 850 WHEEL LOADERS 5035 5055 850LRC 1150LRC Engine performance kw 23 35 45 55.4 Bucket capacity m 3 0.35 0.55 0.85 1.15 Operating weight kg 1,720 3,800 4,500 5,900 Load over height / dump height 2680 / 2250 2890 / 2320 3000 / 2500 Travel speed km/h 20 20 20 20 Tipping load kg 1,250 1,980 3,200 4,140 Engine Yanmar Diesel Yanmar Diesel Deutz Diesel Deutz Diesel Turning radius 1950 2700 2550 2850 38
Telehandlers 1245T TH627 TELEHANDLERS 1245T TH627 Performance kw / hp 22,6 / 31 55.4 / 75 Bucket capacity m 3 0.45 0.85 Height / width 4130 / 3600 5600 / 5280 Load over height / dump height 1.961 / 1.560 1.980 / 1.960 Operating weight kg 2,700 4,900 Travel speed km / h 0 20 0 20 Max. payload (LSP 500 ) kg 1.200 2.700 Max. stacking height / dumping height 4.278 / 3.609 5.730 / 5.280 Turning radius over tires 2.722 3.670 Engine Yanmar Diesel Kohler 40
Backhoe Loader BL744C BACKHOE LOADER BL744C Operating Weight kg 7010 Loading / Digging Bucket Capacity m 3 1.0/0,3 Engine Make Engine Model MWM Navistar International 4.10 T Loader / Backhoe Digging Depth 132 / 4350 Hydraulic Flow l/min. 129 42
Wheel Dumper 1601 2001s 3001s WHEEL DUMPER 1601* 2001s 3001s* Payload kg 1,500 2,000 3,000 Net weight kg 1,261 1,810 2,410 Bucket Struck Piled l 829 1,044 Type of engine Yanmar 3TNV76 Yanmar 3TNV82A Yanmar 3TNV88 Engine output (ISO 3046/1) kw/hp 17 / 23.1 22.5 / 30.6 24.4 / 32.7 Maximum travel speed km/h 16 21 22 Articulation angle ± 33 ± 37 ± 37 Turning radius 3,300 3,500 3,650 Gradeability % 50 45 50 Length Width Height 3,310 1,305 2,550 930 1,210 3,420 1,485 2,650 1,500 1,850 4,140 1,785 2,610 * Available in front tip, high tip and swivel tip 44
Notes
www.wackerneuson.co.za Johannesburg: info.johannesburg@wackerneuson.com +27 11 672 0847 Durban: info.durban@wackerneuson.com +27 31 569 1200 Cape Town: info.capetown@wackerneuson.com +27 21 981 2197