EXPOSED FLOOR MOUNT TUB FILLER WITH HANDSHOWER AND LEVER HANDLES ROHL Perrin & Rowe Bath U.3520L/1 FEATURES FINISHES WARRANTY 1/2 F NPT connections Spout, valve, and handles made from solid brass 1/4 turn ceramic disc valves Unique handle fixing clip, engineered to increase the life of the valve 19 GPM at 40 PSI Includes both porcelain and metal lever inserts Kit includes: U.3530L Tub filler U.5380 Hand shower cradle set U.6388 Floor pillar legs Polished Chrome Polished Nickel Satin Nickel Inca Brass English Bronze Limited Lifetime 3 1/4 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 1
U.3520L/1 Spare Parts Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 2
Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 3
SHOWER BATH Installation Instructions Tub/Shower Mixer Installation/Operation Fixed Riser Check Valve Fibre Seal Mixer Body Adjustable Wall Stay Cap Nut 'O' Seal Adaptor Fibre Seal Ø1 1 / 8 Hole Union nut Backnut Base Seal Extended Pillar Union 2" MAX 3 /4 " NPT 'O' Seal Floor Leg Rosette 'O' Seal Wall Union 3 /4 " NPT HOT IN COLD IN 1/2 " NPT Fig 1. Installation of Faucet Fig 2. Floor Leg Assembly Fig 3. Wall Union Assembly BEFORE USE Carefully check the installation for leaks. If further building work is to be carried out in the vicinity, cover the mixer faucet with a plastic bag to avoid damaging the finish. Please ensure that the installation complies with the local plumbing codes. OPERATION Ceramic disc valves are fitted as standard to this faucet. Flow from FULLY OFF to FULLY ON is achieved by rotating the handles a quarter turn. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 4
Installation Instructions Fig 2. Spare Parts - *Where indicated specify color CARE & MAINTENANCE Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the plated finish in good condition. Do not use proprietary abrasive liquids, powders, or pads to clean the faucet. You will damage the plated finish and void your guarantee. SPARE PARTS AND SERVICE 3Parker Irvine CA 92618 (714) 557-1933 Perrin & Rowe isa trademarkofavilion Ltd. 903500U/2 01/08 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 5
U.6388 Installation Guide Page 1 Ø 3 1/4 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 6
U.6388 Installation Guide Page 2 9.061153 Screws x4 9.24811* Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 7
U.6388 Installation Guide Page 3 Fit a 3/4 plug to leak test the installations Install stop valve onto NPT connector with slotted screw facing the rear of the installation, fully tighten bottom nut. Check that slotted screw has remained in position. The rough line should be tested by using the in-line isolating valve. It is recommended to fit a 3/4 plug to leak test the Supply Flex and joint. Floor hole size max diameter 1, the rough line must be fully supported 1/2 connection Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 8
U.6388 Installation Guide Page 4 Slide outer tube over the Supply Flex with the Access Slot aligned with stop valve screw. Ensure the top nut remains accessible Supply flex nut Loosely fit the outer tube to mounting surface with 4 fixing screws. Slide rosette over outer tube and place on top of floor leg flange. Holding the nut on supply flex, thread on the union. Avoid twisting supply flex. The mixer can now be fitted using the installation instructions supplied. Fully secure assembly to mounting surface. Lock unions in position with the grub screw in the inside of the outer tube using the hexagon key supplied. Rosette Access slot Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to. 9