Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com A-4829 80mm Rudge Wheel Spanner Steel spanner wrench for 80mm Rudge wheels as used on Duesenberg Model A and other automobiles. CNC milled from 4140 high strength steel. Duplicate of the original design. Notes on size: 80mm refers to the maximum size of the outer bearing. Actual hub diameter is 102mm measured across the outside of the splines on the car and not the wheel itself. Used to tighten the horn trumpet elbow used on Klaxon K-22 horns. Cadmium plated steel with a special shape to get CAD-0013 Klaxon K-22 Horn Nut on the elbow nut in the tight quarters near $ 38.50 the radiator and headlight. This wrench has universal application for any car using a K-22 horn. COR-0046-C J-6954 J-6954-1 Cord 810/812 Bumper Jack Lock Washer Buffalo Wire Wheel Hubcap Buffalo C6 Wheel Tool Bag Replacement part for original Cord jack. This part is attached to the jack screw by riveting the end of the screw over the washer. Material: Steel; Finish: Natural; Thickness:.100. High quality replica of hubcap wrench for Buffalo wire wheel hubcap removal and installation. Precision machined from 4140 pre-heated steel. Durable black epoxy finish. Material: 4140 pre-heated steel, 8620 steel; Finish: Black epoxy; OAL: 15.000; Hex: 4.000. Canvas bag to hold Buffalo wheel wrench for C6 Buffalo wire wheel hubcaps. For use with many cars using C6 Buffalo wire wheels including: Duesenberg Cadillac Lincoln DuPont Rolls Royce and others. $ 33.00 $ 950.00 $ 82.50 J-6957 Duesenberg Floorboard Latch Key Cadmium plated floorboard latch key for use with Duesenberg Model J. $ 27.50 Cadmium plated cam cover nut wrench J-6959 Duesenberg Cam Cover $ 110.00 for Duesenberg Model J. J-6960 Classic & Exotic Service Leather Key Holder Genuine leather Classic Exotic Service key holder. $ 11.00 J-6967 Duesenberg Wire Wheel Spoke Cadmium plated wire wheel spoke wrench for use with Duesenberg Model J. $ 13.50 1/21/19. s subject to change. Page 1/5
J-6969 Duesenberg Fan Adjusting Cadmium plated steel fan adjusting wrench for use on Duesenberg Model J. J-6970 Duesenberg Tool Case Reproduction Duesenberg tool case. Heavy canvas bound as original with leather holders for various tools and buckles to tighten the strap. Excellent duplicate of original design. $ 302.50 J-6985 Duesenberg Water Pump Gland Cadmium plated water pump gland wrench for use on Duesenberg Model J. J-7012 Duesenberg Front Axle Nut Cadmium plated front axle pivot pin bearing retainer nut wrench for Duesenberg Model J. Cadmium plated camshaft timer for use J-7050 Duesenberg Camshaft Timer $ 145.50 on Duesenberg Model J. J-7053 MAS-0004-A Watson Stabilator Adjusting Maserati Tool Bag 3500 Sebring & Vignale Spider Steel adjusting wrench for Watson Stabilators. Has 1.680 hex to fit the 1 5/8 hex on the Stabilator center shaft. Black vinyl tool roll with brown leather straps and buckle closures for use with Maserati 3500 Vignale Spider and Sebring. Rolls up into 14'' x 8'' unrolls to hold 11 tools. Exact duplicate of original tool roll. Maserati part number 30002/33996. Material: Vinyl and leather; Length: 14.00; Width: 8.00; Unrolled length: 29.5; Unrolled width: 14.00; Number of tool loops: 11. $ 27.50 MAS-0004-B Maserati Tool Bag Ghibli Indy Black vinyl tool roll with leather straps used with many Maserati GT cars. Rolls up into 14'' x 8'' unrolls to hold 10 tools. For use on all Ghibli and Indy cars. Exact duplicate of original tool roll. Maserati part number 30002/33996. Material: Vinyl and leather; Length: 14.00; Width: 8.00; Unrolled length: 29.5; Unrolled width: 14.00; Number of tool loops: 11. MAS-0005 Maserati Jack Bag Black vinyl jack bag with leather straps for the tool kit of many Maseratis using scissor jacks.;for use with early Quattroporte ;Ghibli ;Indy and;khamsin. Exact duplicate of original bag. Maserati part number 107VA5766. Material: Vinyl and leather; Length: 16.5; Base OD: 5 3/4; Width (laid flat): 7 5/8. $ 192.50 MAS-0005-B Maserati Jack Bag Small Black vinyl jack bag with leather straps. For use on Maserati 3500 GT Sebring Coupe and Vignale Spider. Exact duplicate of original bag. Maserati part $ 192.50 number 30003/51021. Material: Vinyl and leather; Length: 16.00; Base OD: 4 7/8; Width (laid flat): 6 5/8. Page 2/5 1/21/19. s subject to change.
MISC-0196 Buffalo C4 Wheel Tool Bag Leather trimmed tool bag for a Buffalo Wire Wheel wrench with an opening of 3 1/4. Made to fit wrenches with ''6505-B'' cast into them. Length: 16.00; Width top: 7.00; Width bottom: 3.00. These brackets are designed to attach to the Amphicar suspension and provide tie $ 71.50 MISC-0215 Amphicar Tie Down Bracket Set down points for strapping the car to a trailer. These were produced for a client $ 227.00 to prevent damage to his car during transport. Laser cut steel 3/8th thick. MISC-0302 Pantera Tool Roll Bag Hand made vinyl and leather tool bag for early 1970-1972 De Tomaso Pantera. Our bag is an accurate replica of the original tool bag with one main pocket and twelve side pockets. Material: Leather, vinyl; Length: 16.00; Width: 7.50; Opened width: 13.00; Side pockets: 2.75 x 4.00; Main pocket: 6.5 x 16.00. $ 250.00 MISC-0305 Duesenberg A Hubcap Custom made CNC machined aluminum hubcap wrench for use on Duesenberg Model A. Material: Aluminum OAL: 10.00 OD: 4.375 Hex ID: 3.187 Thickness:.375 Hole:.500 $ 220.00 MISC-0306 Spark Plug Rack 18mm Plugs 18mm Spark plug rack to store six spare plugs. Designed to be fastened to the firewall for convenient extra storage. Perfect for use on any car with 18mm spark plugs. Material: Aluminum; Thread: M18 x 1.50; Length: 197mm; Width: 32mm; Thickness: 19mm; Mounting holes: 5.5mm; 135.5mm centers. $ 110.00 SCH-0008 STR-0039 Schebler S Carburetor Main Jet Tube Threading Tool Stromberg Carburetor Metering Jet Tool for cleaning the threads of Schebler Model S carburetor jet tubes that have a 5/16-24 thread. Material: OH Drill rod; Finish: Natural; Thread: 5/16-24; OAL: 6.00; DIA: 5/16; Square end: 15/64 x 15/64 x 5/16; Thread length: 1.350. Stromberg carburetor metering jet wrench. The hole is.218 wide and.281 long. This wrench will fit the larger Stromberg jets with a 7/16-24 thread. For use with jets P-19442, P-17004 and P-22660. For use with the following series carburetors: AA AAV BXO BXOV BXV EE WW and many others. Material: SS; Finish: Natural: end DIA: 3/8; 'Length of wrench end: 1.00; OAL: 2 3/4. Aluminum tag for use on Buffalo wheel wrench numbers 5 and 6. Material: $ 14.00 $ 38.50 TAG-0054 Buffalo Wheel Tag Aluminum; Widest point: 1.896; $ 44.00 Narrowest point:.927; Length: 7.000; Thickness:.040. 1/21/19. s subject to change. Page 3/5
TOOL-0001 TOOL-0002 TOOL-0003 1/4-24 High Speed Steel Plug Tap 1/4-24 x 1 OD High Speed Steel Round Die Packard V12 Valve Guide Removal Tool 1/4-24 high speed steel tap as used in many places on Duesenberg and other prewar cars. For use with high speed steel round die, our part number TOOL-0002. Material: Steel. 1/4-24 Thread high speed steel die with a 1 inch outer diameter.; Used in many places on Duesenberg and other prewar cars. For use with high speed steel tap, our part number TOOL-0001. Material: Steel. Puller used to remove the valve guides in the Packard V12 engine. The cup pilots in the valve seat and the threaded shaft draws the guide out of the block. $ 25.00 $ 25.00 $ 325.00 TOOL-0004 Packard V12 Valve Adjusting Tool Tool used to collapse the hydraulic dash pot when adjusting the valve stem length on Packard V12 engines. $ 476.00 TOOL-0005 TOOL-0006 Trico Wiper Motor Cover Oval Screw Socket,.156 Wide Trico Wiper Motor Cover Oval Screw Socket,.125 Wide Socket for Trico vacuum wiper motor cover screw. 5/32 Wide recess for screw head with 1/4 hex to fit 1/4 driver handle. Material:4140 Pre heat treat steel;finish:natural;hex:1/4;oal:.628;ov al socket:.156 x.237. Socket for Trico vacuum wiper motor cover screw. 1/8 Wide recess for screw head with 1/4 hex to fit 1/4 driver handle. Material:4140 Pre heat treat steel; Finish:Natural; Hex:1/4; OAL:.625; Oval socket:.125 x.204. $ 22.00 $ 22.00 Page 4/5 1/21/19. s subject to change.
Terms and Conditions Returns Items must be returned in new unused condition within 14 days of receipt. Items returned after 14 days of receipt are subject to a 15% restocking fee. No returns will be accepted after 90 days from the original purchase date. Original shipping charges are non-refundable. Refunds will be issued upon receipt and inspection of the returned item and will be issued in the manner payment was received. For returns made after 60 days, refunds will be issued by check only. Items which are cut to order and sold by the foot and items made to customer specified lengths or widths are not returnable. When returning an item, please include a copy of your original invoice and send the item to: Classic & Exotic Service, Inc. Attn: Returns 2032 Heide (USPS only) 2000 Heide (UPS, FedEx only) Troy, MI 48084 USA All returns must be mailed - we cannot accommodate in-person returns. Delivery We ship worldwide Monday through Friday. Our normal handling time is 24 hours or less - many orders ship the same day they are placed. Some items may require an additional handling time - see individual product descriptions for information. Expedited domestic shipping is through UPS. For expedited UPS shipping, orders must be received by 1PM EST. Orders received after 1PM EST will ship the next business day. UPS business days are Monday - Friday. Next Day Air orders placed on Friday will be delivered on Monday. In some instances, non-expedited domestic orders may be shipped by USPS Priority Mail at our discretion. If your order must be shipped by UPS Ground, please note that when placing your order. International shipping is through USPS Express Mail or UPS Worldwide services. We do not ship by Fedex - that includes domestic and international orders. Shipping cost is determined by package weight and shipment destination. Shipping cost for your order can be viewed in your shopping cart by entering a shipment destination.