FREQUENTLY ASKED QUESTIONS WHAT IS ENGEN DYNAMIC DIESEL 50 PPM? Engen Dynamic Diesel 50ppm is a high quality automotive diesel engine fuel that contains less than 50 parts per million of sulphur. These low sulphur levels enable the product to be compatible with many emission control devices, including catalytic converters and diesel particulate traps designed to operate at this low sulphur level. It is also fully compatible with older diesel technology. Engen Dynamic Diesel 50 ppm is formulated with additive fuel technology that has the potential to maintain all diesel engines at their peak design conditions. It also satisfies the demand for improved fuel economy, extended drain intervals and fuel systems protection. The continuous use improves fuel system and injector cleanliness, which helps to increase equipment life, restore and maintain power and performance while simultaneously reducing exhaust emissions. Engen Dynamic Diesel 50 ppm contains anti-foam components, which reduce the tendency of foaming normally associated with standard diesel, and provides for spill free, cleaner, faster and more efficient refuelling, keeping vehicle and equipment working for longer periods. Cleaner 1. Why is sulphur being reduced from fuels in the market? Compounds containing sulphur occur naturally in diesel. The reason for reducing sulphur in fuel is to reduce vehicle emissions and also enable the introduction of modern vehicles and equipment, fitted with emission control technology, to ultimately improve urban air quality.
2. What is the difference between Engen Dynamic Diesel 50ppm and Engen Dynamic Diesel 500ppm? Engen's Dynamic Diesel 50 ppm has a 10-fold reduction in sulphur content vs. the 500 ppm grade. 3. Will the lubrication properties of Engen Dynamic Diesel 50 ppm protect sensitive fuel systems? Engen Dynamic Diesel 50 ppm has the same lubrication properties as the higher sulphur grades. Lubricity additives used in Engen Dynamic Diesel 50 ppm ensures that the specified lubricity levels are maintained. Benefits 1. Can you benefit from using Engen Dynamic Diesel 50 ppm? Engen Dynamic Diesel 50 ppm is designed to provide the following benefits: Clean the fuel system and keep it clean. Reduce fuel injector deposits and maintains optimum fuel spray patterns, thereby restoring and maintaining power and reducing emissions. Reduce foam-forming tendencies, resulting in spill-free, cleaner, faster and more efficient refuelling, as well as longer intervals between refuels.
Suitability 1. What is the recommended use of Engen Dynamic Diesel 50 ppm? Engen Dynamic Diesel 50 ppm is suitable for modern high-speed road diesel engines, including modern common rail high-speed direct injection technology (HSDI) designed to run on diesel fuels of a sulphur level that offer continuous high performance, power, cleaner combustion and improved economy. 2. Can Engen Dynamic Diesel 50 ppm be used in all vehicles? In what other equipment can it be used? Engen Dynamic Diesel 50 ppm sulphur can be used in all types of medium and high-speed diesel engines such as those found in mobile, portable and stationary equipment designed to run on the required sulphur levels. Engen Dynamic Diesel 50 ppm is further recommended for underground mining diesel applications where air quality control is critical. Engen Dynamic Diesel 50 ppm s lower sulphur levels enable the product to be compatible with emission control devices such as catalytic converters and diesel particulate traps designed to operate at this low sulphur level. 3. Can Engen Dynamic Diesel 50 ppm be mixed with other diesels? Yes, it is fully compatible with other makes of diesel. Engen Dynamic Diesel 50 ppm is fully miscible with higher sulphur grades. With the continuous use of 50 ppm diesel, the sulphur level of higher sulphur fuel in the vehicle or equipment`s fuel tank will reduce due to dilution.
Technical 1. What about older vehicles? Engen Dynamic Diesel 50 ppm is fully compatible with older diesel technology. 2. Will I need any conversions on my vehicle / equipment / fleet with the use of Engen Dynamic Diesel 50 ppm? No conversions or changes are needed. 3. Will my vehicle fuel consumption increase/ decrease when switching to Engen Dynamic Diesel 50 ppm? No. Fuel consumption is largely determined by engine condition and numerous external factors. 4. What is in the additive pack that provides these benefits? The multifunctional detergent additive package in Engen Dynamic Diesel 50 ppm contains a combination of deposit control chemistries (consisting of a detergent, anti-foam component, corrosion inhibitor and demulsifier), which begin to restore lost power as soon as fuel containing it is introduced to a diesel engine. 5. What makes Engen Dynamic Diesel 50 ppm so suited to modern diesel engines? The lower sulphur, tighter tolerances, higher pressures and smaller orifices typical of modern design conditions are particularly sensitive to fouling, so ultra-high detergency is highly important. The additive technology needs to be able to withstand ever more challenging engine conditions.
Quality and Performance 1. How do I know the fuel I m buying is Engen Dynamic Diesel 50 ppm? Pumps will be clearly marked. When buying from recognised Engen retail sites or agents, you are assured of quality. 2. Does Engen Dynamic Diesel 50 ppm meet performance requirements? Engen Dynamic Diesel 50 ppm meets and exceeds all current fuel specifications, including the performance benefit requirements of modern engine technologies.