Series -SQ00 Port Solenoid Valve Plug-in Unit [Option] How to Order Manifold Electrical entry F kit D-sub connector kit P kit SSQ 08 FD Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC wiring system compatible) kit Note ) S kit ead wire kit Clean series 0 Serial transmission kit EX0 Integrated-type (For Output) Serial Transmission System Stations station Note) stations Note) The maximum number of stations depends on the type of electrical entries. 6P ( 0P ) Manifold mounting D DIN rail mounting E Direct mounting D, (R) port size FD0 FD FD FD PD0 PD PD PD PDC JD0 ead wire connector location Note ) D0 (N) U0 (N) D (N) U (N) D (N) U (N) SDF SDH SDJ SDJ SDQ SDR SDR SDV Option Nil 0 to B Note ) K Note ) N Nil Cable/SI unit specifications D-sub connector kit, without cable D-sub connector kit, with. m cable D-sub connector kit, with.0 m cable D-sub connector kit, with.0 m cable Flat ribbon cable (6P) kit, without cable Flat ribbon cable (6P) kit, with. m cable Flat ribbon cable (6P) kit, with.0 m cable Flat ribbon cable (6P) kit, with.0 m cable Flat ribbon cable (0P) kit, without cable Flat ribbon cable (0P) PC wiring system compatible ead wire kit with 0.6 m cable ead wire kit with. m cable ead wire kit with.0 m cable 00T Note ) NKE Corp.: Fieldbus System NKE Corp.: Fieldbus H System Panasonic Industrial Devices SUNX Co., td.: S-INK (6 output points) Panasonic Industrial Devices SUNX Co., td.: S-INK (8 output points) DeviceNet OMRON Corp.: CompoBus/S (6 output points) OMRON Corp.: CompoBus/S (8 output points) CC-ink CE-compliant Nil Q CE-compliant, (R) port ø8 s, (R) port ø/6" s None DIN rail length specified Back pressure check valve Special wiring specifications (Except double wiring) With name plate (Side ported only) Note ) Specify DIN rail length with D at the end. (Enter the number of stations inside.) The number of stations that may be displayed is longer than the manifold number of stations. Example: -D09 Note ) When -B is selected, a back pressure check valve is included in all stations of the manifold. If the back pressure check valve is used only for the station that need it, then specify the station location in the manifold specification. ( -B is not necessary) Note ) Specify -K for wiring specification for cases below. (Except kit) - ll single wiring - Single and double mixed wiring. - When there are stations which do not require wiring (e.g. individual SUP spacer), specify the wiring specification in the manifold specification so that the number of solenoids is the maximum number of solenoids or less. (Standard wiring specification is double wiring) Note ) For specifying two or more options, enter them alphabetically. Example: -BKN Station (Double wiring) to 9 stations to 8 stations to 8 stations to stations to 8 stations to stations to 8 stations Max. number of solenoids for special wiring specifications Note ) 8 6 6 8 6 8 6 CEcompliant Note ) Separately order the 0P type cable assembly for the P kit. Note ) Specify the wiring so that the maximum number of solenoids is not exceeded. (The number of solenoids are counted as: for single solenoids and for type P double solenoids.) Note ) When specifying the negative common specifications of the kit, suffix N to the kit symbol. 78
Port Solenoid Valve/Plug-in Unit -SQ00 How to Order Valve ctuation type SQ Clean series Seal Rubber seal position single () (B) (R) (R) position double (Double solenoid) Note) () (B) (R) (R) Rubber seal position closed center () (B) (R) (R) position exhaust center () (B) (R) (R) position pressure center () (B) (R) (R) Note) For double solenoid specification, the function symbol below is D. Function Symbol Specifications Nil Standard type (0. W) B Quick response type (0.9 W) Manual D Note ) position double (Double solenoid specifications) N Note ) Negative common Note ) D is specified for position double. Note ) For kit, when the manifold specifies negative common, the valve common should also be negative. The combination of negative common of the valve cannot be specified with S kit (EX0). Note ) When two or more symbols are specified, indicate them alphabetically. C6 [Option] Cylinder port Symbol Port size Port location C C C6 M 6 override Nil Non-locking push type (Tool required) Manifold block Nil Without manifold block Port plug mounting port Nil None Port () B Port (B) With ø. s With ø s With ø6 s M thread With ø. s With ø s With ø6 s M thread CE-compliant Nil Q CE-compliant ead wire is not included. When ordering with manifolds When only valves are required. Side ported Note) Top ported Note) Can be changed to side ported configuration. B ocking type (Tool required) M MB With manifold block, With manifold block built-in back pressure check valve ead wire is not included. For adding stations Rated voltage 6 VDC VDC Note ) ight/surge voltage suppressor is built-in. Note ) S kit: VDC only 79
Port Solenoid Valve/Plug-in Unit -SQ00 How to Order Manifold ssembly (Example) Example) D-sub connector kit, with cable ( m) position single ( VDC) -SQ0--C6 ( sets) m D-sub connector cable XT0-DS-00 F kit (D-sub connector kit) position double ( VDC) -SQ0D--C6 ( sets) Stations 6 7 8 9 -SSQ-09FD-D set (F kit 9-station manifold base) -SQ0--C6 sets ( position single) -SQ0D--C6 sets ( position double) SSQ00-- set (Blanking plate) Cylinder port fitting C6 Manifold base (9 stations) -SSQ-09FD-D The asterisk denotes the symbol for assembly. Prefix it to the part no. of the solenoid valve, etc. dd the valve and option part numbers in order starting from the first station on the. When entry of part numbers becomes complicated, indicate on the manifold specification sheet. Blanking plate SSQ00-- ( set) 80
Port Solenoid Valve/Plug-in Unit -SQ00 Model Series SQ00 position position ctuation type Single Double Closed center Exhaust center Pressure center Seal Model Rubber seal -SQ Rubber seal -SQD Rubber seal -SQ Rubber seal -SQ Rubber seal -SQ Flow rate characteristics Note ) / (P /B) ( R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv 0.79 0.79 0.6 0.6 0.79 0.0 0.0 0.0 0.0 0. 0.9 0.9 0. 0. 0.9 0.80 0.80 0.8 0.80 0.9 0.0 0.0 0.6 0.0 0.0 0.9 0.9 0.6 0.9 0. Response time (ms) Note ) Standard (0. W) or less 0 or less 9 or less 9 or less 9 or less Quick response (0.9 W) or less or less or less or less or less Note ) Values for the cylinder port size of C6, CY Values of EXH. Flow rate characteristics of (B R) declines about 0% of ( R). Note ) Based on JIS B 87-98. (Values with a supply pressure of 0. MPa and light/surge voltage suppressor. Values fluctuate depending on the pressure and air quality. Weight (g) 80 9 0 0 0 Specifications Valve construction Fluid Maximum operating pressure Valve specifications Solenoid specifications Single Double (Double solenoid) position mbient and fluid temp. ubrication Pilot valve manual override Min. operating pressure Vibration/Impact resistance Note ) Protection structure Coil rated voltage llowable voltage fluctuation Coil insulation type Power consumption (Current) VDC VDC Rubber seal ir 0.7 MPa 0. MPa 0. MPa 0. MPa to 0 C Note ) Not required Push type/ocking type (Tool required) 0/0 m/s Dust tight VDC, VDC ±% of rated voltage Equivalent to class B 0. W DC (7 m), 0.9 W DC (0 m) Note ) 0. W DC ( m), 0.9 W DC (80 m) Note ) Note ) Use dry air to prevent condensation when operating at low temperatures. Note ) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed in both energized and de-energized states in the axial direction and at right angles to the main valve and armature. (Default settings) Impact resistance: No malfunction occurred when it was tested with a drop tester in the axial direction and at right angles to the main valve and armature in both energized and deenergized states once for each condition. Note ) Value for quick response type Symbol position single position double (Double solenoid) position closed center position exhaust center position pressure center () (B) () (B) () (B) () (B) () (B) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) Manifold Specifications Base model -SSQ- - P, R C8 (For ø8) Piping specifications Note ) Port size Port location Side Note ) Top, B Port size C (For ø.) C (For ø) C6 (For ø6) M (M thread) (For ø.) (For ø) 6 (For ø6) (M thread) pplicable solenoid valve Note ) s in inch sizes are also available. Note ) Can be changed to side ported configuration. Note ) n optional specification for special wiring is available to increase the maximum number of stations. Note ) Except valves. 8 Connection type Note ) pplicable stations F kit: D-sub connector P kit: Flat ribbon cable 6P 0P to 9 stations -SQ J kit: Flat ribbon cable to 8 stations PC wiring system compatible kit: ead wire S kit: Serial transmission to 8 stations Note ) station weight (g) 0 0 0 60 7 Note ) station weight (g) 0 0 0 0
Port Solenoid Valve/Plug-in Unit -SQ00 F Kit (D-sub connector) (8.) 9. 7 0. (Mounting hole dimension) pplicable connector: D-sub connector (Conforming to MI-C-08) ( position). (Double) 8. (Single) 9.7.6. Release for switching connector direction 9.6. 7... [(R), port] pplicable tubing O.D.: ø8 7.8 P=. Stations R P. 8. P=. 6 7 8 9.. n.7 8. 6 Indicator light Manual override 7. 60, thread piping [(), (B) port] pplicable tubing O.D.: ø. : ø Thread size: M 7. x M DIN rail clamp screw n 67 8.. Formula =.n +. =.n + 7 n: Stations (Max. stations) 6 7 8 9 6 7 8 9 0 78. 90.. 6 7. 9 70. 8 9. 0 6. 8 9. 6. 7 8. 97 08. 0. 96 7. 9 0.. 6 76. 88 99... 7 68. 80 9. 0. 6 7. 9 7. 0 0 6. 7 87. 00. 7. 0 6. 7 87. 00 00. 7. 0 6. 7. 8 60. 60. 7 8. 98.. 8 60. 7 8. 98... 8 60. 7 8. 8
Port Solenoid Valve/Plug-in Unit -SQ00 P Kit (Flat ribbon cable connector) 9. 7 0. (Mounting hole dimension). 7.8 P=.. 9.. Indicator light Manual override 8.. ( position). (Double) 8. (Single) 9.7.7 8.. 7..6 pplicable connector: Flat ribbon cable connector (6P) (Conforming to MI-C-80) Triangle mark indicator position x M DIN rail clamp screw Release for switching connector direction Stations 6 7 8 n [(R), port] pplicable tubing O.D.: ø8 R 60 9.6. P 6 7 7.. 8. P=., thread piping [(), (B) port] pplicable tubing O.D.: ø. : ø Thread size: M n 67 8. 8. Formula =.n +. =.n + 7 n: Stations (Max. stations) 6 7 8 9 6 7 8 9 0 78. 90.. 6 7. 9 70. 8 9. 0 6. 8 9. 6. 7 8. 97 08. 0. 96 7. 9 0.. 6 76. 88 99... 7 68. 80 9. 0. 6 7. 9 7. 0 0 6. 7 87. 00. 7. 0 6. 7 87. 00 00. 7. 0 6. 7. 8 60. 60. 7 8. 98.. 8 60. 7 8. 98... 8 60. 7 8.
Port Solenoid Valve/Plug-in Unit -SQ00 J Kit (PC wiring system compatible flat ribbon cable) (8.) 9. 7 0. (Mounting hole dimension) pplicable connector: Flat ribbon cable connector (0P) (Conforming to MI-C-80) ( position). (Double) 8. (Single) 9.7.6. Triangle mark indicator position Release for switching connector direction [(R), port] pplicable tubing O.D.: ø8 9.6. 7.. 7.8.. 8. Stations R P P=. P=. 6 7 8 9.. n, thread piping [(), (B) port] pplicable tubing O.D.: ø. : ø Thread size: M Indicator light Manual override.7 8.. 7. x M DIN rail clamp screw 6 7 60 n 67 8.. Formula =.n +. =.n + 7 n: Stations (Max. 6 stations) 6 7 8 9 6 78. 90.. 6 7. 9 70. 8 9. 0 6. 8 9. 96 7. 9 0.. 6 76. 88 99... 7 7. 0 0 6. 7 87. 00. 7. 0 6. 7 87.. 8 60. 60. 7 8. 98.. 8 60. 7 8. 98 8
Port Solenoid Valve/Plug-in Unit -SQ00 Kit (ead wire cable) Electrical entry G/ 9. 7.8 0. (Mounting hole dimension) Station number WG ead wire 7. 6.9. P=. 9.. Indicator light Manual override (8.) ( position). (Double) 8. (Single) 7..6..7 8.. 7. x M DIN rail clamp screw Stations 6 7 8 n ead wire length: 0, 0.6 m,. m,.0 m [(R), port] pplicable tubing O.D.: ø8 R (9.) 9.6. P 6 7 60 7. 9.. P=., thread piping [(), (B) port] pplicable tubing O.D.: ø. : ø Thread size: M n 6 70. Formula =.n +. =.n + 9 n: Stations (Max. stations) 6 7 8 9 67. 79 90.. 6. 8 9. 7 8. 8 9. 6. 8 9. 6. 7 8. 97 0. 7. 0 6. 7 87. 00.... 8 60. 7 8. 98.. 8
Port Solenoid Valve/Plug-in Unit -SQ00 (8.) S Kit (Serial transmission unit) 9. 7 8. (Single). (Double) ( position) (9.) 9.6...6 No. BS+ BDH BD BS- FG V 0V SERI UNIT EX0-SCS [(R), port] pplicable tubing O.D.: ø8 7. PWR. COMM ERR. DDRESS No.. 66.9 8. 9. P=. Stations R P P=. 6 7 x M DIN rail clamp screw 8 9.. n Indicator light.7 8. Manual override 6. 7, thread piping [(), (B) port] pplicable tubing O.D.: ø. : ø Thread size: M 7. 60 n 78. Formula =.n + 67 =.n + 96. n: Stations (Max. 6 stations) 6 7 8 9 6 90.. 6 7. 9 70. 8 9. 0 6. 8 9. 8 9.. 6. 77 88. 00.. 6 7. 69 80. 7. 0 6. 6. 7 87. 00. 7. 0 6. 7 87. 00 00 8 60. 7 7 8. 98.. 8 60. 7 8. 98.. 86
Series -SQ000 How to Order Manifold Port Solenoid Valve Plug-in Unit [Option] SSQ 08 FD D Clean series CE-compliant Nil Stations Q CE-compliant 0 station, (R) port size FD0 D-sub connector kit, without cable F kit FD D-sub connector kit, with. m cable FD D-sub connector kit, with.0 m cable D-sub connector kit FD D-sub connector kit, with.0 m cable 6 stations 6 Note) 6 stations, (R) port Nil Note) The maximum number of ø s stations depends on the, (R) port 00T type of electrical entries. ø/8" s Option Manifold mounting Nil None 0 to 6 Note ) DIN rail length specified D DIN rail mounting B Note ) Back pressure check valve E Direct mounting K Note ) Special wiring specifications (Except double wiring) N With name plate (Side ported only) Note ) Specify DIN rail length with D at the end. (Enter the number of stations inside.) The number of stations that may be displayed is longer than the manifold number of stations. Example: -D09 Note ) When -B is selected, a back pressure check valve is included in all stations of the manifold. If the back pressure check valve is used only for the station that need it, then specify the station location in the manifold specification. ( -B is not necessary) Note ) Specify -K for wiring specification for cases below. (Except kit) - ll single wiring - Single and double mixed wiring. - When there are stations which do not require wiring (e.g. individual SUP spacer), specify the wiring specification in the manifold specification so that the number of solenoids is the maximum number of solenoids or less. (Standard wiring specification is double wiring) Note ) For specifying two or more options, enter them alphabetically. Example: -BKN Electrical entry Kit type ead wire Station Max. number of Max. number of CEcompliant connector Cable/SI unit specifications stations for special solenoids for special location (Double wiring) wiring specifications wiring specifications Note ) PD0 Flat ribbon cable (6P) kit, without cable P kit PD Note ) Flat ribbon cable (6P) kit, with. m cable PD Flat ribbon cable (6P) kit, with.0 m cable 6 stations PD Flat ribbon cable (6P) kit, with.0 m cable 6P Flat ribbon cable connector kit 0P PDC Flat ribbon cable (0P) kit, without cable to 9 stations 8 J kit Flat ribbon cable (0P) JD0 Flat ribbon cable (0P) PC wiring system compatible (PC Wiring System compatible) to 8 stations 6 stations 6 T kit TD0 Terminal block box kit to stations 6 stations 0 Terminal block box kit D0 (N) kit ead wire kit with 0.6 m cable Note ) U0 (N) D (N) ead wire kit with. m cable U (N) D (N) ead wire kit with.0 m cable ead wire kit U (N) Note SDF NKE Corp.: Fieldbus System S kit SDH NKE Corp.: Fieldbus H System to 8 stations 6 stations 6 SDJ Panasonic Industrial Devices SUNX Co., td.: S-INK (6 outputs) SDJ Panasonic Industrial Devices SUNX Co., td.: S-INK (8 outputs) to stations 8 stations 8 SDQ DeviceNet to 8 stations 6 stations 6 SDR OMRON Corp.: CompoBus/S (6 outputs) Serial transmission kit EX0 Integrated-type (For Output) SDR OMRON Corp.: CompoBus/S (8 outputs) to stations 8 stations 8 Serial Transmission System SDV CC-ink to 8 stations 6 stations 6 ) Separately order the 0P type cable assembly for the P kit. Note ) Specify the number of the solenoid so that the maximum station number is not exceeded.(the number of solenoids are counted as: for single solenoids and for type P double solenoids.) Note ) When specifying the negative common specifications of the kit, suffix N to the kit symbol. For details, refer to the WEB catalog. 87
Port Solenoid Valve/Plug-in Unit -SQ000 How to Order Valve SQ Clean series C6 CE-compliant Nil Q CE-compliant [Option] Seal Rubber seal ctuation type position single () (B) (R) (R) position double (Double solenoid) Note) () (B) (R) (R) Rubber seal position closed center () (B) (R) (R) position exhaust center () (B) (R) (R) position pressure center () (B) (R) (R) Note) For double solenoid specification, the function symbol below is D. Function Symbol Specifications Nil Standard type (0. W) B Quick response type (0.9 W) D Note ) position double (Double solenoid specifications) N Note ) Negative common Note ) D is specified for position double. Note ) For kit, when the manifold specifies negative common, the valve common should also be negative. The combination of negative common of the valve cannot be specified with S kit (EX0). Note ) When two or more symbols are specified, indicate them alphabetically. Rated voltage 6 Manual override Nil VDC VDC Cylinder port Symbol Port size C C6 C8 6 8 Non-locking push type (Tool required) Manifold block Nil Without manifold block Port plug mounting port Nil None Port () B Port (B) With ø s With ø6 s With ø8 s With ø s With ø6 s With ø8 s B ocking type (Tool required) Note ) ight/surge voltage suppressor is built-in. Note ) S kit: VDC only ead wire is not included. When ordering with manifolds When only valves are required. Side ported Port location Note) Can be changed to side ported configuration. M With manifold block Note) Top ported MB With manifold block, built-in back pressure check valve ead wire is not included. For adding stations D Slide locking type (Manual type) Only side ported applicable 88
Port Solenoid Valve/Plug-in Unit -SQ000 How to Order Manifold ssembly (Example) Example) D-sub connector kit, with cable ( m) position single ( VDC) -SQ0--C8 ( sets) m position double ( VDC) -SQ0D--C8 ( sets) Stations 6 7 8 position closed center ( VDC) -SQ0--C8 ( set) Blanking plate SSQ000-- ( set) D-sub connector cable XT0-DS-00 F kit (D-sub connector kit) Manifold base (8 stations) -SSQ-08FD-D Cylinder port fitting C8: ø8 s -SSQ-08FD-D set (F kit 8-station manifold base) -SQ0--C8 sets ( position single) -SQ0D--C8 sets ( position double) -SQ0--C8 set ( position closed center) SSQ000-- set (Blanking plate) The asterisk denotes the symbol for assembly. Prefix it to the part no. of the solenoid valve, etc. dd the valve and option part numbers in order starting from the first station on the. When entry of part numbers becomes complicated, indicate on the manifold specification sheet. 89
Port Solenoid Valve/Plug-in Unit -SQ000 Model Series SQ000 position position ctuation type Single Double Closed center Exhaust center Pressure center Flow rate characteristics Note ) Seal Model / (P /B) / / (/B R/R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv Rubber seal -SQ. 0.7 0.. 0.8 0.7 Rubber seal -SQD. 0.7 0.. 0.8 0.7 Rubber seal -SQ.9 0.7 0.6.8 0.9 0.7 Rubber seal -SQ.9 0.7 0.6. 0. 0.6 Rubber seal -SQ. 0.7 0.6.8 0.0 0.7 Specifications Valve construction Fluid Maximum operating pressure Single Double (Double solenoid) position mbient fluid temperature to 0 C Note ) ubrication Not required Pilot valve manual override Push type (Tool required)/ocking type (Tool required)/slide locking type (Manual) Vibration/Impact resistance Note ) 0/0 m/s Protection structure Dust tight Coil rated voltage VDC, VDC llowable voltage fluctuation ±% of rated voltage Coil insulation type Equivalent to class B Power consumption (Current) VDC VDC Response time (ms) Note ) Weight Standard (0. W) or less or less 6 or less 0 or less or less or less or less or less or less or less Note ) Values for the top ported cylinder port size of C8. CY Values of EXH. The side ported type will be about % less. Note ) Based on JIS B 87-98. (Values with a supply pressure of 0. MPa and light/surge voltage suppressor. Values fluctuate depending on the pressure and air quality.) Symbol (R) (R) Rubber seal ir 0.7 MPa 0. MPa 0. MPa 0. MPa Quick response (0.9 W) (g) 0 7 7 7 0. W DC (7 m), 0.9 W DC (0 m) Note ) 0. W DC ( m), 0.9 W DC (80 m) Note ) Note ) Use dry air to prevent condensation when operating at low temperatures. Note ) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed in both energized and de-energized states in the axial direction and at right angles to the main valve and armature. (Default settings) Impact resistance: No malfunction occurred when it was tested with a drop tester in the axial direction and at right angles to the main valve and armature in both energized and de-energized states once for each condition. Note ) Value for quick response type. position single position double (Double solenoid) position closed center position exhaust center position pressure center () (B) () (B) () (B) () (B) () (B) Manifold Specifications Base model Series -SQ000 -SSQ- - P, R C (For ø) (R) (R) Piping specifications Note ) Port size Port location Side Note ) Top Valve specifications Solenoid specifications, B Port size Min. operating pressure C (For ø) C6 (For ø6) C8 (For ø8) C (For ø) C6 (For ø6) C8 (For ø8) (R) (R) pplicable solenoid valve Note ) s in inch sizes are also available. Note ) Can be changed to side ported configuration. Note ) n optional specification for special wiring is available to increase the maximum number of stations. Note ) Except valves. (R) (R) Connection type F kit: D-sub connector P kit: Flat ribbon cable 6P 0P to 9 stations -SQ J kit: Flat ribbon cable PC wiring system compatible. Kit: ead wire S Kit: Serial transmission to 8 stations to 8 stations (R) (R) Note ) Note ) Note ) stations station pplicable weight weight stations (g) (g) 80 80 80 60 60 0 90
Port Solenoid Valve/Plug-in Unit -SQ000 F Kit (D-sub connector) 8. (Mounting hole dimension) 8.. Release for switching connector direction 7.8 P=7. 8.8 Indicator light Manual override (.) SMC 7 ( position). (Single, Double)..9... B x M DIN rail clamp screw 8. 7.6.6 pplicable connector: D-sub connector (Conforming to MI-C-08) Stations 6 7 8 n [(R), port] pplicable tubing O.D.: ø R (8.) 9. 0.9 B B B B B B B B P 6..7.7 7.. 6. P=7. [(), (B) port] pplicable tubing O.D.: ø : ø8 n 69. 9 87 9 9.. 7. 8 Formula: = 7.n +, = 7.n + 7. n: Stations (Max. 6 stations) 6 7 8 9 6. 9. 7 7. 9 09. 7. 6 79. 97. 7. 6 79. 97. 9. 67 8. 0 9. 7. 0 7 87. 00 7. 6. 7 87.. 0 6. 7 60. 8. 98.. 8 7 8. 98. 60. 7 8.
Port Solenoid Valve/Plug-in Unit -SQ000 P Kit (Flat ribbon cable) 8. (Mounting hole dimension) (.) SMC 8. 7 ( position). (Single, Double). pplicable connector: Flat ribbon cable connector (6P) (Conforming to MI-C-80) Release for switching connector direction.9 Triangle mark indicator position... [(R), port] pplicable tubing O.D.: ø (8.) 9. 0.9 7... 6. 7.8 P=7. 8.8 Stations 6 7 8 n R P B B B P=7. B B B B B B Indicator light Manual override x M DIN rail clamp screw 8. 7.6.6 6..7.7 [(), (B) port] pplicable tubing O.D.: ø : ø8 n 69. 87 9 9.. 7. 8 Formula: = 7.n +, = 7.n + 7. n: Stations (Max. 6 stations) 6 7 8 9 6. 9. 7 7. 9 09. 7. 6 79. 97. 7. 6 79. 97. 9. 67 8. 0 9. 7. 0 7 87. 00 7. 6. 7 87.. 0 6. 7 60. 8. 98.. 8 7 8. 98. 60. 7 8. 9
Port Solenoid Valve/Plug-in Unit -SQ000 J Kit (PC wiring system compatible flat ribbon cable) 8. (Mounting hole dimension) 8. Release for switching connector direction. 7.8 P=7. 8.8 Indicator light Manual override.9 8. (.) 7 ( position). (Single, Double)... 7.6.6. SMC x M DIN rail clamp screw B Triangle mark indicator position pplicable connector: Flat ribbon cable connector (0P) (Conforming to MI-C-80) Stations 6 7 8 n [(R), port] pplicable tubing O.D.: ø R (8.) 9. 0.9 B B B B B B B B P 6..7.7 7.. 6. P=7. [(), (B) port] pplicable tubing O.D.: ø : ø8 n 69. 9 87 9 9.. 7. 8 Formula: = 7.n +, = 7.n + 7. n: Stations (Max. 6 stations) 6 7 8 9 6. 9. 7 7. 9 09. 7. 6 79. 97. 7. 6 79. 97. 9. 67 8. 0 9. 7. 0 7 87. 00 7. 6. 7 87.. 0 6. 7 60. 8. 98.. 8 7 8. 98. 60. 7 8.
Port Solenoid Valve/Plug-in Unit -SQ000 T Kit (Terminal block box) (.) 8. 77 7 ( position). (Single, Double)..9. [(R), port] pplicable tubing O.D.: ø x G /" Electrical entry (77) 9. 0.9 7. 67.7 8.8 P=7. 8.8 Stations 6 7 8 n R P 0 8.8 P=7. B Indicator light Manual override x M DIN rail clamp screw 8. 7.6.6.7.7 6. [(), (B) port] pplicable tubing O.D.: ø : ø8 n DIN rail mounting Direct mounting 6. 77. 7 8. 60. 8 9 00. 7.0 98... 98.0 6 0 7. 8.. 7. 0 60.. 6 6 6. 7 8.0 Formula: = 7.n + 6, = 7.n + 60 n: Stations (Maximum 6 stations) 7 68. 8. 87. 98 60. 8 86 00 00. 8. 9 0. 7.. 98.0 7. 8.0 8.. 0 60.. 6 70 7 8. 8.0 7. 87. 87. 98 7.0 9 0. 8. 08.... 6 6 0 7. 8.0 9
Port Solenoid Valve/Plug-in Unit -SQ000 Kit (ead wire) 8.. 8. (Mounting hole. dimension) Electrical entry G / (.)..9 8. 7 ( position). (Single, Double).... 7.6.6 SMC Station number WG ead wire 8.8 P=7. 8.8 Indicator light Manual override x M DIN rail clamp screw B [(R), port] pplicable tubing O.D.: ø Stations 6 7 8 n ead wire length: 0, 0.6 m,. m,.0 m R (8) 9. 0.9 B B B B B B B B P 6..7.7 7. 0 8.8 P=7. [(), (B) port] pplicable tubing O.D.: ø : ø8 Formula: = 7.n + 6, = 7.n + 60 n: Stations (Max. stations) n 6 7 8 9 6. 8 98. 6. 68. 86 0. 8. 6 77. 9. 0 7. 6 8. 00 7.. 70 0 7. 0 7 87.. 7. 6. 7 00.. 8 60. 8. 98. 8 7 8.. 9
Port Solenoid Valve/Plug-in Unit -SQ000 S Kit (Serial transmission) (.) 8. 7 ( position). (Single, Double).9 (8) 9. 0.9... [(R), port] pplicable tubing O.D.: ø 7. V 0 0V +V G D DB DG FG SI unit SERI UNIT EX0-SMJ ERR. SD RD PWR. RUN B RTE STTION No. 76. 9.9 7.8 P=7. 8.8 Stations 6 7 8 n R P B B B P=7. B B B B B B Indicator light Manual override x M DIN rail clamp screw 8. 7.6.6 6..7.7 [(), (B) port] pplicable tubing O.D.: ø : ø8 n 69. Formula: = 7.n +, = 7.n + 6 n: Stations (Max. 6 stations) 6 7 8 9 6 87.. 8. 76 9. 7 9. 7. 9 8. 6 09. 7 6. 8. 6 98. 6 79. 97.. 68. 86 0 6. 87. 00 7. 0 7 87.. 7. 6. 7 00. 60. 7 98.. 8 60. 8. 98. 8 7 8.. 96