Electrification Automation and Drives Solutions for the Chinese Ship Industry siemens.com/marine
Your challenge: Intense competition is taking place on the world's oceans, to achieve sustained competitiveness, a ship must fulfill three key requirements: Superb reliability and compliance with strict safety standards, lower day-to-day operating costs, and compliance with the most stringent environmental regulations. Our solution: Completely Integrated Solutions - SISHIP CIS Siemens Marine and Shipbuilding is among the world's leading suppliers of diesel-electric propulsion systems. Our solutions ensure operational benefits and give a strong contribution to enhanced vessel maneuverability, lower fuel consumption and reduced emission of greenhouse gases. With Siemens Marine Solutions you can get professional project execution and all components from the same supplier. Our family of solutions for merchant ships is designated SISHIP CIS. Based upon he Siemens standard high quality products and components, the SISHIP CIS solutions consolidate our capabilities into one integrated offer Completely Integrated Solutions (CIS). SISHIP CIS Drive LV A compact water cooled drive system based on the Sinamics S120 converter with numerous marine adaptations. Available up to 5MW at 690V for both synchronous or asynchronous motors and in configurations of 6-, 12-, or 24-pulse Diode Front End (DFE) or with Active Front End (AFE). SISHIP CIS Drive MV Range from 2MW upwards with two main concepts; Current source with synchronous motors based upon the extremely reliable and simple SINAMICS GL150 LCI converter, or voltage source with induction or synchronous motors based upon the line-friendly SINAMICS GM150 PWM converter. SIHIP CIS Bluedrive Plus C The new generation of diesel electric propulsion system based on the variable speed generator and DC main busbar technology. Extremely to save fuel consumption and reduce greenhouse gases emission. Meantime, with the integrated main switchboard and converter design, to save space onboard greatly. SISHIP CIS EcoProp Extremely compact hybrid propulsion concept for yachts and other smaller vessels. The powerful solution is based upon decades of proven hybrid propulsion for trains and buses. SISHIP CIS Boost Solution for boosting propeller performance or, if needed, enhancing the available electrical power of the onboard network.
Long-term partnership with the Chinese shipbuilding industry For more than 130 years Siemens Marine and Shipbuilding has been specializing in the design, manufacture and commissioning of electrical equipment for all types of merchant vessels, naval vessels and submarines worldwide. Here in China many Siemens Marine and Shipbuilding projects were previously designed, engineered and managed from Europe. However, as our local knowledge and experience with advanced electrification, automation and electrical driven propulsion systems has increased the last decade, our Shanghai office has developed into a fully fledged business unit, handling the complete value chain from sales and offerings via project execution and commissioning, to life cycle management and services during the operation of the vessels. At present (Fall 2015) Siemens Marine and Shipbuilding in China is directly involved in a portfolio of projects worth several Billions RMB. Projects are with a wide range of vessel types, with different types of ship owners and with both private and state-owned ship yards. Although the projects vary, they all have in common that the yards and owners appreciate high quality systems and solutions and timely and professional project execution. That's why Siemens Marine and Shipbuilding is playing a key role. SISHIP CIS IMAC Integrated Monitoring, Alarm and Control system, based upon the world's most widely used automation system, SIMATIC. Together with our thruster control and joystick system, also based on SIMATIC, we are able to integrate and obtain unique communication between the major components in the concept. SISHIP CIS EcoMAIN EcoMain is designed as a common platform into which all operating data is gathered and processed in a standard format, via a range of onboard interfaces. Energy consumption, emissions, bunkering fluids, service schedules, documentation and information management these are just some of the processes that are typically evaluated and analysed for optimisation. SISHIP CIS esipod SISHIP esipod is a diesel-electric podded propulsion system offering a performance range between 5 and 12 MW. Thanks to outstanding hydrodynamic design and permanently excited synchronous motor, the SSP drive operates extremely efficiently. SISHIP CIS Power Covers high performance, simple and compact electrical power generation and distribution solutions. Siemens Marine Solutions can deliver low and medium voltage generators, switchgear and transformers as well as integrated solutions for Power Management System. SISHIP CIS WHRS Waste Heat Recovery System is compliant with large main-engine designs of manufacturers such as Wärtsilä, Sulzer and MAN B&W. The recovery of thermal losses enables heat energy to be recycled back to the ship's energy supply network, and in combination with SISHIPCIS Boost this can for some ship types and operating conditions significantly improve propulsion performance and the environmental impact.
Project Execution by Excellence, Innovation and Responsibility For a total solutions provider like Siemens Marine Solutions, excellence in project management is a key success factor. This is why we adhere to the group-wide approach PM@Siemens which includes guidelines, tools, standardized processes, milestones and quality gates. Our project managers are experienced in marine project management and engineering, and will go through pre-defined training and certification. By utilizing the PM@Siemens approach our engineers and project managers can concentrate on the innovative interaction with our customers to make sure that the project becomes a success. With Siemens Marine Solutions in China you have a close and reliable partner, who always stands up to the responsibility of making your project a success. Siemens Marine Solutions China Your close and reliable partner Siemens Marine and Shipbuilding has its headquarters in Hamburg, Germany and Norway and main operation centers in China. Norway and China. As a comprehensive solutions provider for merchant marine ship building, Siemens Marine and Shipbuilding China is located in Shanghai and has a core team of some 40 marine specialists, as well as sales representatives in Dalian, Tianjin, Qingdao, Nantong, Ningbo, Wuhan and Guangzhou. In addition, there is a local operation center in Shanghai with some 200 electrical and automation engineers, covering all industry sectors. Covering the whole range from sales to project execution and after sales services, Siemens Marine and Shipbuilding China serves domestic merchant ship building with advanced electrification, automation and electrical driven propulsion systems. And wherever your vessel operates, you can always get Siemens Marine and Shipbuilding technical support. Siemens Marine Solutions China is located in Shanghai
Excellence from Experience Success stories of typical vessels Customer: China Oilfield Services Limited Yard: Shanghai shipyard 2 x 4500 kw Main Propulsion 1 x 1200 kw Bow Thruster 1 x 1500 kw Retractable Azimuth Thruster Mechanical thrusters Reduction Gear box 4 x 5250 kva Generators MV Switchboard Power Management System IMAC around 2500 I/Os 12 Streamer Seismic Research Vessel (2010) Customer: A2SEA Denmark Yard: COSCO Nantong shipyard 3 x 3800 kw MV Main drive System 1 x 1500 kw LV Bow tunnel Thruster drive 1 x 1200 kw LV Bow tunnel thruster drive 1 x 2000 kw LV retractable Thruster drive 6 x 3675 kva MV Main Generators LV and MV Switchboard Power Management System SISHIP IMAC approx. 5000 I/Os Wind Turbine Installation Vessel (2011) Customer: Sapura Malaysia Yard: COSCO Nantong Shipyard 2 x 4500 kw LV Main drive systems 3 x 2400 kw LV Azimuth Thrusters drive 2 x 2400 kw LV Retractable thrusters drive 1 x 1500 kw LV bow Thruster 6 x 6000 kva MV Main Generators MV Switchboard Power Management System SISHIP IMAC approx. 8400 I/Os Pipelayer Crane Vessel (2014) Customer: China Offshore Oil Engineering Corporation (COOEC) Yard: Guangzhou Huangpu Shipyard 2 x 4500 kw MV Main drive system 2 x 2200 kw LV Bow tunnel Thrusters 1 x 2200 kw LV retractable Thruster 4 x 4813 kva MV Main Generators 2 x 3588 kva MV Main Generators MV Switchboard Power Management System SISHIP IMAC approx. 8800 I/Os Multi-Purpose Operation Vessel (2014)
Accommodation Vessel Ocean 500 (2014) Customer: COTEMAR Mexico Yard: COSCO Nantong Shipyard 6 x 3700kW Main Azimuth Thrusters 6 x 6000KVA Main Generators 6600V MV Switchboard 2 x DC-Bus systems for 4 winches 450kW UPS system LV switchboard Platform Supply Vesse l (2015) Customer: Tidewater USA Yard: Zhenjiang Shipyard 4 x 1823kVA LV variable speed main generators Bluedrive Plus C 2 x 1600 kw LV Main Drive systems 2 x 880 kw LV Bow tunnel Thrusters Energy Management System IMAC Remote monitoring system 22000t Icebreaker Polar Class Heavy Transport Deck Carrier (2014 under construction ) Customer: Redbox Yard: Guangzhou shipyard International Co., Ltd. 2 x 12MW Low speed motor Main Propulsion drive system 2 x AC440V Multi-VFD System for Ballast Pump 1 x 1000kw bow thruster drive system 2 x 9400kVA and 2 x 7000kVA 6600V Generator, MV main switchboard and Power Management System IMAC system approx. 5500I/O DNV ice-class requirement Subsea support vessel ( 2014 under construction ) Customer: Maersk, Denmark Yard: COSCO Dalian Shipyard 2 x 3500kw Main Propulsion drive system 3 x 2555kw Tunnel thruster drive system 3 x 1800kw Thruster AFT drive system 4 x 4688kVA and 2 x 1556kVA 6600V Generator, MV main switchboard and Power Management System IMAC system approx. 5000I/O LR DP3, Closed Bustie, Dual Feeding Customer: MAC Company, Singapore, User: Canada Nautilus Minerals Yard: Mawei shipyard, Fujian 227m subsea mining vessel ( 2015 under construction ) 2 x 3500kw Main Propulsion drive system 3 x 3000kw Thruster AFT drive system 2 x 2000kw bow thruster drive system 6 x 5378kVA 6600V Generator, MV close-ring main switchboard DP2,MV closed-ring system
Life Cycle Service Protect your capital for the long term With our comprehensive, seamless service support across the globe for the entire life cycle of your vessel, Siemens Marine and Shipbuilding provides excellent value maintenance for your capital. Whether you require retrofits, conversion, maintenance, repairs, spare parts logistics, training course or technical support we are always here to help you protect your investment for the long term. With our global service network around 130 countries, we can provide the quick response from our nearest service office whenever you have any service requirement no matter for electrical power, automation or drives. Contact Us If you are interested in discussing what we can do for you or any service you need, please do not hesitate to contact us. A good place to start may be the following. We will do the best to give you a professional and quick response. You may also visit us at www.siemens.com/marine Sales: Tel: + 86 21 3889 2328 Fax: + 86 21 3889 3296 E-mail: marine.china@siemens.com Service: Tel:+ 86 400-810-4288 ( Hotline for Pacific Asia Area) E-mail: shipservice@siemens.com
For further information, please contact: Siemens AG Process Industries and Drives Division Process Solutions Business Unit, Marine Solutions Phone: +49 (0) 40-2889-2700 Fax:+49 (0) 40-2889-3680 E-mail: marine@siemens.com Siemens Ltd., China Process Industries and Drives Division Process Solutions Business Unit, Marine Solutions Siemens Shanghai Center No.500, Dalian Road, Shanghai 200082, P.R. China Phone: +86 (21) 3889-2328 Fax:+86 (21) 3889-3296 E-mail: marine.china@siemens.com Siemens Ltd., China Process Industries and Drives Division Subject to change without prior notice Order No.: E20001-A575-C600-V2-5D00 700-SH902999-1017.3 Siemens Ltd., China 2015 The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.