Acre Jean Ltd. Unit 7, The Kimber Centre, 54 Kimber Rd LONDON SW18 4PP ORDER NOW: 0208 8773211 ates Uprights Horizontals nd Drape Softscene Base Product Catalogue: Telescopic Drape-support System Strong Lightweight Durable Telescopic AUTHORISED UK DISTRIBUTOR Aluminium Telescopic Drape-support System by: Edition: January 2019* WWW.ACREJEAN.COM * Prices listed in this catalogue were correct at the time of its production, and are subject to change at any time, and without prior notice.
BASE PLATE ASSEMBLIES BASEPLATE PIN & SCREW ASSEMBLY PART# SIZE 11010 2 X 4 11011 2 X 6 11012 2 X 8 18" x 18" and 24" x 24" Comes with 3 pin holes Low profile design minimizes the tripping hazard to the public. All steel base plates are zinc plated for rust protection. Supplied with pin and screw assembly. BASE ASSEMBLIES PART# A B THICK WEIGHT Bases are supplied with suitable pin assembly. RECOMMENDED FOR UPRIGHTS STANDARD PIN SIZE* B1818 18 18 3/16 17.5lbs Up to 12 2 x 4 B181838 18 18 3/8 35lbs Up to 16 2 x 6 B2424 24 24 3/16 31lbs Up to 20 2 x 8 *All pin sizes fit onto any of the bases. ADJUSTABLE UPRIGHTS 1-5/8 DIAMETER TUBE 2 PIECE MODELS 3 PIECE MODELS 1-13/16 DIAMETER TUBE Unique slip-lock feature. Easy to set up, accurate and rapid height adjustments. Quickly adjusts to any height within model range. No tools required for set up or disassembly. No knobs or wing nuts to adjust. Tube surfaces have protective anodized coating. 2 DIAMETER TUBE The SLIP-LOCK collar assembly locks automatically when the inner pole is raised vertically to the desired height. As a vertical load is applied downward, the ball-taper lock feature locks tighter. The more pressure applied downward the tighter it will lock. To release the lock, simply raise the inner pole slightly and lift the release ring. For SAFETY, hold the inner pole firmly while raising or lowering the height. 2 PIECE ADJUSTABLE UPRIGHT PART# SIZE TS35 3-5 TS610 6-10 TS712 7-12 TS814 8-14 TS916 9-16 3 PIECE ADJUSTABLE UPRIGHT PART# SIZE TS614 6-14 TS820 8-20 Page 1
Tubing - Heavy wall, high strength aluminum Finish - All aluminum tubing is anodized for corrosion protection and keeping drapes clean End Plug - High impact polypropylene & heavy gage zinc plated steel hook. Note: Drape support can be used at any length between fully collapsed length and maximum stop length. Units with collapsed length of 5' or longer can extend approximately one foot over maximum stop. TELESCOPIC DRAPE SUPPORTS Heavy guage zinc-plated steel hook. Low profile will not snag drapes. Deep engagement slot for secure fitting. Low centre of gravity reduces twisting. Protective clear anodized coating on tubes. 1-9/16 diameter outer tubing. 2 PIECE ADJUSTABLE HORIZONTAL PART# SIZE TDS23 2-3 TDS35 3-5 TDS681 6-10 TDS712 7-12 CURVED DRAPE SUPPORTS 3 - Piece Curve Drape Support. 10 long with depth of 2. Requires 3 x uprights & bases. Not adjustable. Max. tube length is 59. Part # 301010 Page 2
2 - Piece Curve Drape Support. Consists of a set of two half circles. Requires 4 x uprights & bases. Not adjustable. Diameter of circle is 5. COLUMN COVERS 2 HANGING COMPONENTS PART#110049 PART#110017 PART#110016 DOUBLE BACKWALL HANGER Mounts on top of Standard Uprights and 2 pc Adjustable Uprights; allows attachment of 2 parallel bars in any or all of 4 directions. SHELF HANGER / TDS BRACKET Add Telescopic Drape Supports to various locations across a booth. Additional Uprights not required. Brackets easily slip over draped Drape Supports. Two (2) required. 8 VALANCE HANGER Create a valance mounted on backwall uprights; add a telescopic drape support cross bar and hang valance, lights or signs. Two (2) required. ADJUSTABLE CROSSBAR CLAMP Attach a crossbar at any height between two uprights. Especially useful for hanging a border underneath a screen. Rubber-lined to prevent slippage. Two (2) required. Max. load 30lbs. PART#110098 NEW PRODUCT! Page 3
PRICE LIST These prices are basic trade unit prices in GBP (excluding VAT). Quantity discounts are available, so please feel welcome to give one of our sales staff a call to discuss your requirements. Delivery can be arranged for an additional fee. Subject to stock availability. Base Plate Assemblies B1818 Baseplate & Pin assembly (For Upright Max. 12ft high) 37 (EXCL. VAT) B181838 Baseplate & Pin assembly (For Upright Max. 16ft high) 64 (EXCL. VAT) B2424 Baseplate & Pin assembly (For Upright Max. 20ft high) 60 (EXCL. VAT) Adjustable Uprights TS35 2 x Part Telescopic Upright 3ft to 5ft 41 (EXCL. VAT) TS610 2 x Part Telescopic Upright 6ft to 10ft 54 (EXCL. VAT) TS712 2 x Part Telescopic Upright 7ft to 12ft 59 (EXCL. VAT) TS614 3 x Part Telescopic Upright 6ft to 14ft 94 (EXCL. VAT) TS916 2 x Part Telescopic Upright 9ft to 16ft 68 (EXCL. VAT) TS820 3 x Part Telescopic Upright 8ft to 20ft 109 (EXCL. VAT) Telescopic Drape Supports TDS35 2 x Part Telescopic Horizontal 3ft to 5ft 14 (EXCL. VAT) TDS681 2 x Part Telescopic Horizontal 6ft to 10ft 23 (EXCL. VAT) TDS712 2 x Part Telescopic Horizontal 7ft to 12ft 26 (EXCL. VAT) TDS9246 2 x Part Telescopic Horizontal 9ft to 16ft 33 (EXCL. VAT) Curved Drape Supports 301010 3 x Piece Curve Drape Support (Non adjustable) 70 (EXCL. VAT) 301035 2 x Piece Circular Column Cover 5ft Dia. (Non adjustable) 90 (EXCL. VAT) Extensions 220101 1ft Extension for 2 x Piece Adjustable Upright 12 (EXCL. VAT) 220102 2ft Extension for 2 x Piece Adjustable Upright 17 (EXCL. VAT) Page 4
PRICE LIST These prices are basic trade unit prices in GBP (excluding VAT). Quantity discounts are available, so please feel welcome to give one of our sales staff a call to discuss your requirements. Delivery can be arranged for an additional fee. Subject to stock availability. Hanging Components 110049 Double Backwall Hanger 28 (EXCL. VAT) 110017 Shelf Hanger / TDS Bracket 8 (EXCL. VAT) 110016 8 Valance Hanger 8 (EXCL. VAT) 110098 Adjustable Crossbar Clamp 10 (EXCL. VAT) Miscellaneous Items 11010 Pin & Screw Assembly for Baseplates (2 x 4 ) 14 (EXCL. VAT) 11011 Pin & Screw Assembly for Baseplates (2 x 6 ) 18 (EXCL. VAT) 11012 Pin & Screw Assembly for Baseplates (2 x 8 ) 20 (EXCL. VAT) 11036 Replacement Screw for Baseplate Pin 1.50 (EXCL. VAT) 11003 Replacement End Plug for Horizontal - L (Large End) 5 (EXCL. VAT) 11004 Replacement End Plug for Horizontal - S (Small End) 5 (EXCL. VAT) 11021 Replacement Spring Button Assembly 4 (EXCL. VAT) 11014 1 EMT Hook & Plastic Cap 4 (EXCL. VAT) Page 5