NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) / CONNECTION: 1 1/2" MNPT OR BSPT SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE SEAL RING BALL SPRING 1/2" TUBING BARBS (DEFAULT CONNECTION) 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP MAZZEI PART NO.'s: CAP.75 PP CAP.75 PVDF CAP.75 ECTFE CAP.75 N-PVDF ISO CAP.75 PVDF ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL 1/2" MALE STRAIGHT THREAD 7. FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND IN THE "KNOWLEDGE CENTER" AT WWW.MAZZEI.NET. 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: 661.363.65 WEB: WWW.MAZZEI.NET REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1-1/2" MNPT OR BSPT (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1584 PP 1584 PVDF 1584 N-PVDF 1584 ECTFE ISO 1584 PVDF ISO 1584 ECTFE TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 "CAP MODIFICATION DETAIL" (ALTERNATE) 1-1/2" INJECTOR; MODEL 1584 1584 PP/PVDF/ECTFE N/A 1:3 NC 1 OF 2
(ISOMETRIC VIEW) (FOR REFERENCE ONLY) 279mm 11.in 48mm 1.9in 14mm 5.5in SUCTION PORT 86mm 3.4in 114mm 4.47in MODEL NO. LOCATION (OPPOSITE) FLOW 48mm 1.9in (ACROSS FLATS) 1-1/2" INJECTOR; MODEL 1584 1584 PP/PVDF/ECTFE N/A 1:3 NC 2 OF 2
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) 1/2" TUBING BARBS (DEFAULT CONNECTION) 5. 6. / CONNECTION: 1-1/2" SANITARY FERRULE SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL SEAL RING BALL SPRING 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP MAZZEI PART NO.'s: CAP.75 PP CAP.75 PVDF CAP.75 ECTFE CAP.75 N-PVDF ISO CAP.75 PVDF 7. FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND IN THE "KNOWLEDGE CENTER" AT WWW.MAZZEI.NET. 1/2" MALE STRAIGHT THREAD 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: 661.363.65 WEB: WWW.MAZZEI.NET REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1-1/2" SANITARY FERRULE (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1583 PP 1583 PVDF 1583 N-PVDF 1583 ECTFE ISO 1583 PVDF ISO 1583 ECTFE TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 "CAP MODIFICATION DETAIL" (ALTERNATE) 1-1/2" INJECTOR; MODEL 1584- TC 1584-TC PP/PVDF/ECTFE N/A 1:3 NC 1 OF 2
(ISOMETRIC VIEW) (FOR REFERENCE ONLY) 14mm 5.5in 279mm 11.in SUCTION PORT 51mm 2.2in 86mm 3.4in 112mm 4.4in MODEL NO. LOCATION (OPPOSITE SIDE) FLOW 1-1/2" INJECTOR; MODEL 1584- TC 1584-TC PP/PVDF/ECTFE N/A 1:3 NC 2 OF 2
Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA 9337-9555 USA PSIG TEL 661.363.65 FAX 661.363.75 www.mazzei.net 5 1 15 2 25 3 35 4 45 5 GPM SCFH 47. PSIG GPM SCFH 238 1 4. 5 219 2 18. 31.8 1 19 3 2.5 15 157 4 *(4.1) 1.6 6 2 62.5 12 98. 3 68.3 2 72.4 35 53. 5 25.5 37.1 4 37.1 7 2.5 45 *(51.5) 25.8 8 *(8.5) 12.6 244 144 5 232 5 71.7 1 27 7 31.2 45.7 15 179 1 23.8 7 2 67.5 15 12 *(13.) 9.3 3 91.9 17 4 56.3 5 12 45 43. 1 36.1 41. 5 33.1 12 31.1 55 *(6.) 21.2 15 *(17.) 12.6 248 185 5 239 5 128 1 222 1 4.3 65.7 15 199 15 33.1 8 2 72.2 174 2 *(21.5) 12. 3 117 194 4 79.7 5 152 5 49. 1 44.2 99.4 6 27.8 15 54.3 65 *(68.) 17.9 2 28.5 25 25 *(26.) 1. 5 246 26 1 234 5 173 2 193 1 47.7 123 9 3 76.5 142 15 72.4 4 98. 2 39.7 5 68.3 25 *(3.5) 22.5 6 46.3 212 7 26.5 5 188 75 *(77.) 17.9 1 147 252 15 51. 98.7 5 252 2 59.7 1 245 25 38.4 2 28 3 *(35.) 21.8 1 3 8.7 168 222 4 122 5 197 5 89.2 1 157 6 61.7 15 111 7 42.4 2 54.1 73.7 8 *(86.) 25.2 25 49.7 26 3 32.4 5 257 35 *(39.5) 21.2 1 255 226 2 237 5 27 12 3 88.4 28 1 175 4 169 15 133 5 13 2 57. 96.6 6 98.7 25 68.3 7 75.7 3 47. 8 55. 35 31.8 9 37.1 4 *(42.5) 18.5 1 *(13) 21.8 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Point). Capacity Performance Table Model 1584
Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA 9337-9555 USA TEL 661.363.65 FAX 661.363.75 www.mazzei.net kg/cm 2 kg/cm 2.35.7 1.5 1.41 1.76 2.11 2.46 2.81 3.16 3.52 22.1 112...7 18.8.35 13.14 68.3 15..7 9.1.21 9.7 1.5 74.4 *(.29) 4.22.28 5. 1.41 236 56.9. 46.2 2.11 32.2.14 34.1 2.46 25..35 96.6 17.5 2.81 17.5.49 9.7 3.16 *(3.62) 12.2.56 *(.6) 5.9. 115. 67.9.35 19.35 33.8.7 98.1.49 118 21.5 1.5 84.5.7 11.2 4.92 1.41 255 71.1.84 *(.91) 4.4 2.11 43.4. 8.2 2.81 26.6.35 48.2 3.16 2.3.7 137 19.3 3.52 15.6.84 14.7 3.87 *(4.22) 1. 1.5 *(1.2) 5.9. 117. 87.3.35 113.35 6.8.7 15.7 153 31. 1.5 94.2 1.5 15.6 1.41 5.62 273 82.2 1.41 *(1.51) 5.6 2.11 55.3. 91.5 2.81 37.6.35 72.1 3.52 23.1.7 167 46.9 4.22 13.1 1.5 25.6 4.57 *(4.78) 8.4 1.41 13.4. 118 1.76 *(1.83) 4.7.35 116. 97.2.7 11.35 81.8 1.41 91.4.7 181 58.2 2.11 6.33 29 67.1 1.5 34.1 2.81 46.2 1.41 18.7 3.52 32.2 1.76 *(2.14) 1.6 4.22 21.8. 1 4.92 12.5.35 89. 5.27 *(5.41) 8.4.7 69.7. 118 1.5 193 46.6.35 119 1.41 28.1.7 115 1.76 18.1 1.41 98.4 2.11 *(2.46) 1.3 2.11 7.3 35 79.4. 14 2.81 57.5.35 93.2 3.52 42.1.7 74.4 4.22 29.1 1.5 52.4 4.92 2. 1.41 25 34.8 5.62 *(6.5) 11.8 1.76 23.4. 122 2.11 15.3.35 121 2.46 *(2.78) 1..7 12. 16 1.41 112.35 98.1 2.11 334 98.4.7 82.8 8.44 2.81 8.1 1.5 62.8 3.52 61.5 1.41 216 45.6 4.22 46.6 1.76 32.2 4.92 35.7 2.11 22.2 5.62 25.9 2.46 15. 6.33 17.5 2.81 *(2.99) 8.7 7.3 *(7.24) 1.3 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Point). Capacity - METRIC Performance Table Model 1584