T I M B E R J A C K H A R V E S T E R 1470D

T I M B E R J A C K H A R V E S T E R 1470D

T I M B E R J A C K H A R V E S T E R 1470D The tough guy for rough terrain To provide maximum stability in really tough conditions, the 1470D is longer, wider and has more weight for stability than other Timberjack harvesters. It is the biggest member of our harvester family and has been redesigned to provide the same technological advances as its little brother, the 1270D. New size for productivity Upgraded for serviceability The 1470D is designed for demanding regeneration harvesting applications in tough conditions like deep snow, marshland, rough terrain and steep slopes. Using the same axles as the Timberjack 1710D forwarder, the 1470D features larger wheels and more ground clearance than earlier models - ensuring optimum performance even in the most difficult conditions. Fitted with a John Deere engine, and offering a choice of 4 robust harvester heads, the 1470D is poised to boost efficiency and meet today s logging challenges better than ever before. The engine hood is divided into two sections to facilitate maintenance work. The larger front engine hood can be raised with an electrical spindle motor. The new component layout on both the front and rear frames ensures convenient access to all routine service points around the engine and pumps. Fewer service points, e.g. for the bogie oscillation bearing, and extended change intervals for engine oil and filter radically reduce the time needed for maintenance work, thus enhancing overall profitability.

The big friendly giant The unique balanced bogie, only available on Timberjack machines, combined with a low center of gravity, advanced transmission control system and wide tires, provides excellent levels of tractive force and reduces ground impact. This ensures effortless movement in all conditions. Superior stability allows the use of a longer boom reach thus minimizing the area touched by wheels. The low-emission Deere engine conforms with the latest emission regulations in both Europe and North America. What s more, each machine can be supplied with a comprehensive environmental kit and vacuum pump for its hydraulic system, if required. 2/3

T I M B E R J A C K H A R V E S T E R 1470D The new standard for visibility! As cozy as home Not only big in size, the Timberjack 1470D is also big in visibility and operator comfort. With these vital features in mind, we aim to see to it that you reap the maximum benefits from the 1470D s superior power. The Timberjack 1470D furnishes an operator environment which is both functional and comfortable. The 1470D ensures enhanced visibility in all directions - including backwards. The narrower rear end of the new model improves both working and driving visibility, creating a new standard for harvester visibility. The spacious cab has all the ergonomic innovations you have come to expect from Timberjack harvesters: an ergonomic seat, plus easy-to-use joysticks and fingertip controls with the Timbermatic 300 system. Additional luxuries like a CD player and a removable lunch box integrated into the cabin door bring the comforts of home to your workplace in the forest.

Turning night into day The 3 degrees of freedom Timberjack also sharpens your view with enhanced on-site illumination. The new optional Xenon lights produce the same amount of light as conventional light bulbs, but last five times longer and consume only one-third of the energy. Due to their daylight-like quality, the lights are also particularly gentle on the human eye. The leveling and turning mechanism provides you with three new degrees of operating freedom: leveling/tilting sideways, leveling/tilting lengthways, and turning around the vertical axis. These functions are entirely independent and adjustable. As a result, the operator can enjoy all the advantages of a turning cabin without visibility disturbances or knocks caused by boom movements. The leveling and turning cabin enables flexibility and ease of movement on difficult terrain, reduces contact damage and improves operator ergonomy. 4/5

T I M B E R J A C K H A R V E S T E R 1470D Your office in the forest Accuracy, speed and productivity are essential competitive factors in today s logging business. The Timbermatic 300 control and measuring system gives you the tools to achieve your productivity goals, and much more. It also provides you with all the facilities of a modern office - right in the middle of the forest. Order-based harvesting requires a control system with accurate measurement, computer connections and wireless data transfer. Timbermatic 300 is a measuring and control system which is standard for the 1470D harvester. This PC/Windows based system neatly integrates the harvesterhead measuring system with the TMC (Total Machine Control) functions. Your decision-making tool The automatic measuring system FlashCut, automatically ensures that expertly selects the optimum sawing the sawbar feeding keeps pace with the point. This means operators don t rotation speed of the saw motor. It keeps have to waste valuable time deciding the chain speed at an optimal level where to cut the trunk, and can concentrate on monitoring the timber the timber is frozen or not, or sharpness/ regardless of the tree species, whether quality instead. A new feed control also bluntness of the saw chain. This results optimizes the feeding power without in more efficient sawing, crack-free slipping and ensures precise cutting, crosscutting and a longer lifetime of the improving both length and diameter sawbar and chain. FlashCut is the accuracy. As a new Timberjack option, trademark for the smartest saw control the patented saw control system, on the market.

A friendly PC world An information solution for the future Timbermatic 300 presents the entire measuring system on one user-friendly color screen. The graphical interface with a two-level menu system is both logical and quick and easy to use. As a PC-based system, the Timbermatic 300 allows users to work in a Windows environment with familiar software tools, e-mail, maps and GPS programs. The display is user configurable: you select only those parameters and programs you need. With wireless data transfer via the Internet or other modern modes of communication, your Timbermatic 300 forms a ready-made platform on which to develop an extensive information system for your machinery. In addition, it converts your forest environment into a fully equipped office, complete with CD-ROM drive, printer etc. Timbermatic 300 is available in 12 language versions. A TimberOffice software package maximizes the utilization of the Timbermatic 300 information and enables you to manage business at home. 6/7

T I M B E R J A C K H A R V E S T E R 1470D Enlarging your production figures The 1470D can also afford to be big-headed when it comes to innovation power. Together with its proven technology and the world s most competitive harvester heads, this machine is geared up to make your production figures bigger than ever. 1250 Nm for superior power A new electrically-controlled, common-rail fuel-injected John Deere diesel engine supplies the 1470D with the same superior power output, but with a torque increase of 25% compared to previous models. The high torque output enables simultaneous use of the feed motors and the boom, maximizing your harvesting efficiency. The 1250 Nm torque also allows the harvester to operate at lower rpm, which results in improved fuel economy, increased component life and reduced noise levels. Just as importantly, service intervals for essentials like engine oil and filter change have been extended from 250 hours to 500 hours.

24/28 MPa for peak performance at brief intervals The 1470D s hydraulic system with a unique 24/28 MPa dual working pressure system generates higher hydraulic oil pressure for brief intervals in situations where greater power is needed, for instance at the start of feeding and in sawing. The higher pressure delivers more power to sawing thus eliminating cutting cracks and to the start of feeding ensuring efficient operation. 3.0 m of stability The 1470D has a 50 cm longer wheelbase than the 1270D series machines and a broader width of 3.0 m. Furthermore, the 1470D features a larger balanced bogie unit and a strong boom achieving a full 10 m reach even when felling heavier timber. These features, combined with the machine s low center of gravity, provide a highly stable platform during both harvesting work and locomotion - particularly on steep slopes. The stability is exceptionally high even when the boom is fully extended. To further improve its performance on steep slopes, the 1470D exerts a tractive force of 190 kn, the highest on the market. 8/9

T I M B E R J A C K 1470D Technical Data H A R V E S T E R Technology that beats the rest Dimensions Length... 7700 mm Nominal Width... 3000 mm (650 tires) 3040 mm (750 tires) Height... 3830 mm (3980 mm with leveling cabin) Transportation height... 3830 mm (3850 with leveling cabin, tilted) Ground clearance... 710 mm Note! Measurements are nominal and may vary due to tire manufacturing tolerances. Weight Depending on equipment, min... 18800 kg Engine John Deere JD6081 HTJ 04 diesel engine Cylinder volume... 8.1 liters Power output... 180 kw / 1200-2000 rpm Torque...1250 Nm / 1400 rpm Fuel tank... 480 l Viscous fan drive Transmission Hydrostatic-mechanical Two-speed gearbox Speed... 0-24 km/h Tractive force... 190 kn Steering Articulated frame steering Steering angle... ±42 Electrical proportional off-road steering Brakes Service and working brakes are hydraulically actuated, oilimmersed, multiple-disc brakes. Spring-actuated parking and emergency brakes Axles Front: Bogie axle with electro-hydraulic differential lock Rear: Single rigid axle with electro-hydraulic differential lock Hydraulic system Load-sensing system Pump displacement...190 cm 3 /r Flow...304 l / 1600 rpm Working pressure...24 / 28 MPa Control system...timbermatic 300 Hydraulic oil system capacity...~ 300 l Electrical system Voltage...24 V Batteries...2 x 140 Ah Alternator...140 A Working lights: 14 twin power and 4 single lamps on the boom, 30 lux in the working area of the boom Tires Front:...650x26,5 or 750x26,5 Rear:...700x34 Boom Parallel motion knuckle boom TJ 210 H 90, 97 or 115 Reach with head...9.3, 10 or 11.8 m Gross lifting torque...178 knm Gross slewing torque...43.6 knm Tilt angle...-13 +25 Slewing angle...220 TAKE CONTROL MAKE DECISIONS 3980 leveling cab BOOST PROFITS THINK GREEN

Cab Spacious, well-lit and comfortable cab with an ergonomic seat and low-effort mini-grip controls. Efficient heating and air conditioning. Excellent visibility on all sides and up to the tree tops. Noise level meets ISO standards. Radio/cassette/CD-player. Light green polycarbonate windows. Safety tested according to ISO standards. Timberjack cab-leveling option The tilting cab is mounted on a leveling platform on the front frame that provides for three degrees of freedom. Tilting sideways 15, forward and backward 11. Turning +/- 50. Tilting functions are independent, and can be controlled individually or in combination. The leveling and turning can be actuated automatically or manually. Measuring system Timbermatic 300, PC/Windows -based measuring and control system integrates the harvester head measuring and control system with the TMC base machine control system Modular based CAN-bus reduces the amount of cabling needed, ensuring accuracy and reliability Head descriptions *) Depends on feed motor size The information in this brochure was correct at the time of publication and is provided as a guide only. Not all options may be available worldwide. Please contact your Timberjack dealer to determine the options available in your country. Easy to use, information is displayed on large color display with clear and userfriendly icons and two-level menus, keyboard with integrated mouse Highly automated harvester head control software, including e.g. automatic controls for sawing, harvester head tilt-up, pressure adjustments of the delimbing knives and feed rollers, stem feed, color marking and stump treatment Compact and efficient design of the push buttons, joysticks and keyboard for excellent ergonomics Easy calibration of length and diameter measuring system Full tree prediction, price and/or distribution and/or limitations based optimization, unlimited number of sites A4 color printer for printing maps, production reports, work and repair statistics, production instructions, calibration history, stem data, log table, machine parameters User friendly interface, help and troubleshooting CD-ROM, floppy disc and USB port for data transfer E-mail software installed SilviA program Software for optional electronic caliper Easy to install and update software Model 762C H762 H754 758 Max opening upper knives, mm 550 770 560 680 Max opening feed rollers, mm 606 620 560 700 Delimbing diameter, tip to tip, mm 430 480 400 480 Max cutting diameter, mm 650 650 550 / 620 650 Weight, incl. rotator and link, kg 1270-1350 1215-1275 880-930 1080-1150 Feed force at 24 MPa gross, kn*) 23.4-28.0 25.1-33.8 16.0-25.2 22.0-27.0 Feed rollers, pcs 2 2 4 4 Feed speed, m/s 0-4.5 0-5.0 0-5.0 0-4.7 Chain speed, m/s 40 40 40 40 Operating pressure max, MPa 24 / 28 24 / 28 24 / 28 24 / 28 Saw bar, cm 75 / 80 82.5 64 / 75 75 Max reach with the TJ 210 H boom, m 9.3 10 11.8 10 Optional equipment Leveling and turning cabin CD-changer Xenon working lights Thinning lights Sun blinds Preheater for cabin, engine and hydraulic oil tank Refill pump for fuel Refill pump for hydraulic oil Vacuum pump for hydraulics Hydraulic oil off-line filter Chains, tracks Spare wheel Electronic calipers Colour marking system Stump treatment device Automatic boom leveling Flashcut saw control Boom damping Environmental kit Note! Standard and optional equipment may vary. For details contact your local dealer. A head for work Timberjack is also the world-class name for high-quality and heavy-duty harvester heads. Their superb performance and durability has been demonstrated in all kinds of work applications all over the world for years. The new 1470D comes equipped with 4 alternatives according to your specific requirements. The new 1470D can be equipped with the extremely robust H762 or 758 harvester heads designed for regeneration harvesting. Thanks to the 4-wheel drive and short frame construction, the 758 is well suited for bent timber and strong branches. The H762 has the Supercut saw unit with integrated chain lubrication and tensioning as standard. On the 4-wheel drive heads the Supercut is an optional feature. 10/11

TAKE CONTROL Timberjack is no ordinary forest machine. It is the right and bright partner that makes you - the operator - a better professional in forest operations. When you invest in Timberjack, you are not only getting a robust high-production machine but also a complete package of forest management capabilities. MAKE DECISIONS The state-of-the-art control system automatically performs all instructed travel and work functions with incredible speed and precision. BOOST PROFITS Ensuring high output in various harvesting applications, Timberjack delivers optimum results whatever the task. It gives you the freedom to move from one job to the next without missing a beat. Geared up for outstanding performance, Timberjack is your razor-sharp business partner. THINK GREEN You can always depend on Timberjack for an environmentally sound solution. It s your strongest ally when it comes to sustaining both a healthy residual forest and a reputation for responsible forest stewardship. This brochure may include features or options not available in all markets. Timberjack, Timbermatic, TMC, TimberOffice, FlashCut and the donkey symbol are registered trademarks of Timberjack Inc. Supercut is a trademark of Hultdins System Ab. Imageneering/Printed in Finland by Offset Ulonen. EN/05/03 www.timberjack.com