Found in this Section: AUDIO 7 LIGHTING 7 HANDLEBAR CONTROLS 9 FOOT CONTROLS 10 COVERS, TRIMS & ACCENTS 11 TOURING & Comfort 14 find more accessories for your in multi-fit 89 3 VICTORY for
laydown curved LICENSE PLATE 13 touring & comfort 14 (not shown below) 4 ENGINE CHROME 12
CROSS COUNTRY for MIRRORS 112 audio 7 handlebar 9 FRONT END LIGHTING 7 5 foot & cruise pegs 10 covers, trims & accents 11
11 14 Sneak Peak New Accessories for Victory in the Works watch www.kuryakyn.com for more information & release dates products are patent pending 6 www.kuryakyn.com 866.277.9598
Audio Kicker KPS52504 4 OHM Speakers Weather-proof, high-efficiency coaxials specifically created as fairing drop-ins or as replacements for rear speakers on Victory bikes equipped with stock speakers. Extremely powerful, these 4 ohm speakers are lighter than anything on the market. speaker specs Woofer: 5.25 Tweeter: 3/4 Max Recommended Amp Power (Peak/RMS): 100W/50W Weight: 12.6 oz Fits: All Victory Vision, Cross Country & Cross Country Tour Models Note: Some applications may require longer screws (not included). 874 Kicker KPS52504 4 ohm Speakers (set) accessories for No Strings Attached! the SOUND OF CHROME now bluetooth enabled! 90 Lighting multi-fit audio lighting 7 headlamp Replacement bulbs can be found in our Multi-Fit section, page 98. 2147 Fits: Victory V92C/DC/TC/ SC with 7 headlamp (ea) Note: Use of high power (100w) bulbs is not recommended & will void warranty. Engine Guard mounted driving lights Featuring 3 DOT approved lights & 1-1/4 clamps, they bolt on with ease. Wiring & adding a switch is simple with our Wiring Relay Kits (P/N s 2202 or 2328 Sold Separately, page 93). Fits: Universal for mounting on 1-1/4 inch Engine Guards, (Mount above, below, or anywhere on bar with 1-1/2 of strait engine guard. Clamp & lights rotate for limitless adjustment) 5019 3 Engine Guard Mounted Driving Lights (pr) Note: Not typically compatible with Fairing Lowers Replacement bulbs - see multi-fit lighting. mount on top of engine guard or below accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop > audio & lighting 7
constellation driving lights with turn signals two-piece fork mounts Patent Pending With DOT approved H-3 bulbs in a 3 diameter stretched bullet housing that flows down to a coordinating 2-1/4 turn signal housing, these are the answer to exceptional front lighting. Wiring & adding a switch is simple with our Wiring Relay Kits (P/N s 2202 or 2328 sold separately, page 93), found in the Multi-Fit section. Fits: Universal Applications for Installation with Küryakyn Two-Piece Clamps (Sold Separately - below) Not intended for use with motorcycles that have OEM fork shrouds, models with fairings or Victory Cross Country. 5009 Constellation Driving Lights with Turn Signals (set) Note: Turn signals have smoked lenses with amber bulbs. Replacement bulbs (P/N 5035, 2229, 2214 & 4813) can be found in the multi-fit section, page 91 & 99 Our sturdy chrome-plated mounts are just the ticket to attach Constellation Driving Lights, Silver Bullets or custom lights using 5/16 mounting hardware to fork tubes. 2275 54mm/58mm Two-Piece Fork Mounts for Inverted Forks (pr) Fits: Hammer, Kingpin & Cross Country Add More! silver bullets (P/N 2319), mounted with twopiece fork mounts (p/n 2275) work great for extra driving lights on your cross country! find them in our multi-fit section Add Some Color! 100 add a trim of color skinni mini TM paint the night with 7 color lizard lights control in the palm of your hands wireless remote control 8 www.kuryakyn.com 866.277.9598
Full Line of Grip Accessories page 108 transformer iso iso -Flame black iso Handlebar Controls accessories for iso -grips U.S. Patent D411,432 Combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-Pads permit air movement for comfort in hot weather. iso -flame grips Featuring a unique flamed pattern in the soft & cushy raised rubber pads & finished off with a Maltese Cross emblazoned end cap & smooth trim ring. transformer grips U.S. Patent D631,725 Transform the look & feel of your ride! Bright chrome grip bodies & sculpted end caps provide a solid feel while contrasting soft black rubber inlays absorb vibration. Interchangeable Widow, Zombie or Maltese Cross Emblems. Note: Accepts all grip end accessories except Accent Rings. Will only accept smooth accent rings for transformer grips (P/N 6364). Black ISO Victory YR ISO ISO Flame Transformer All Models (except Vision) ALL 6235 6345 6261 6233 Note: Kuryakyn Grips are compatible with aftermarket internal bar-style heated grips. Not compatible with OEM heated grips where heat element is in the grip. Mirror-Mounted Accessories tech-connect TM 102 CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST Lock the throttle simply by a ¼ turn of the lever. Made of aircraft grade materials, durability is a cut above the rest. The cleverly designed spring loaded spline makes fine tuning easy. Fits: 08-13 Victory Models (except with cruise beneath switch housing) 6396 Chrome (ea) 6395 Black (ea) Fits: 98-07 Victory Models 6394 Chrome (ea) 6393 Black (ea) Service Parts for Cruise-Mates Drill bit & tap, for installation 6399 21/64 Drill Bit and 3/8-24 Tap Kit (ea) 6394 6393 Note: Installation requires drilling (21/64 ) and tapping (3/8-24 tap) the control housing. These tools are not included, but a Drill Bit and Tap Kit (P/N 6399 below) is available if needed sold separately. includes drill fixtures for Easy Installation! multi-fit audio lighting accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop > handlebar 9
Foot Controls Cruise pegs for down tube mount The answer for installing highway pegs on the frame down tubes of your Victory. The right angle design allows the peg to be positioned for easy reach and long lasting comfort. Keep the look of your sport cruiser clean and uncluttered, while adding additional over the road luxury. Everything you need all in one kit. Fits: All 03-13 Victory Cruisers with 1-1/2 Front Down Tubes (Note: Not for use with Engine Guards or Models with Shrouded Front Down Tubes) 7559 Cruise Pegs for Front Down Tubes (pr) footpeg adapters Sold in Pairs Select a Footpeg or Floorboard (pg 114) and Mount it with an Adapter! Kuryakyn floorboards and foot pegs feature a two part mounting system allowing you to choose the right style for the right bike. Depending on the style you choose, each floorboard or foot peg will require either a splined or tapered adapter (sold in pairs). Throughout the book, floorboards and foot pegs are identified by a symbol next to each style indicating whether it requires a splined or tapered adapter. Use the chart below to determine the right adapter for your application. Note: Motorcycle specific adapters only work with stock OEM peg mounts. tapered splined year front rear front rear Hammer All 8805 8805 8828 8828 Vegas, 8-Ball, Jackpot All 8805 8805 8828 8828 Kingpin* All None 8805* None 8828 Cross Roads All None 8805 None 8828 Cross Country All None 8805 None 8828 High-Ball All 8805 None 8828 None Hard-Ball All None 8805 None 8828 Judge All 8805 8805 8828 8828 Boardwalk All None 8805 None 8828 *Only if using accessory mounts from Victory 123 Pegs & Floorboards 114 10 www.kuryakyn.com 866.277.9598
brake pedal cover Fits: Victory: 09-13 Hammer & S, 09-13 Jackpot, 09-12 Kingpin Low, 09-13 Ness Jackpot, 03-06 Touring Cruiser, All V92DC Models, All V92TC Models, 99-03 V92C Models 4037 Brake Pedal Cover (ea) iso -shift & brake pegs This classy looking peg replaces the stock rubber shift or brake pegs on several Victory Models. Fits: 04-12 Victory Kingpin Models, '10-'13 Cross Roads, Cross Country & Tour, All Vision, Boardwalk & Hard Ball Models 8856 ISO-Shift or Brake Peg Long (ea) accessories for Covers, Trims & Accents saddlebag front kick accents Prevent those unsightly saddlebag scuff & scratches or cover up ones that are already there. Not only do these offer protection, but also look great by offering just the right amount of contrast with black rubber inlayed with brilliant chrome. Installation is hassle free just peel-&-stick. Fits: All Cross Country, Cross Country Tour & Hard-Ball models (Also fits Cross Roads with OEM Hard Saddlebags) 7692 Saddlebag Front Kick Accents (pr) 7692 7692 patent pending Fairing Eyebrows for cross country Break away from the pack and add an elegant, modern look to your fairing. Installation is simple, just peel-&-stick. Made of high quality, lightweight chrome plated ABS. Fits: All Cross Country & Cross Country Tour Models 7691 Chrome Eyebrows (pr) 7691 patent pending rendering shown multi-fit audio lighting accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop rendering shown > foot & Covers, Trims & Accents 11
B C A Cruise Pegs (pg 10) D SPEEDOMETER VISOR Easily affixes to the speedometer, with a reduced glare if you run a windshield! 4015 Fits: All 04-10 Cruiser Models (Jackpot, Kingpin, Vegas, Hammer) with digital gauge (except Vision) BRAKE BLEEDER SCREW & BANJO BOLT COVERS Used by themselves or as a complement, these little jewels transform the unfinished bleeder screws and banjo bolts into glistening chrome. 2062 Brake & Clutch Banjo Bolt Cover (set) Fits: All Victory Models (except Vision) 2064 Bleeder Screw Cover (ea) Fits: All Victory Models 12 www.kuryakyn.com 866.277.9598
a. ENGINE cam ADJUSTER BOLT COVER Cover those unsightly cam adjuster bolts with these great looking, gear tooth designed accents. Engineered exclusively for the Victory motor, these covers bolt on & coordinate with all the Victory chrome engine accents. 7684 Fits: All '06-'13 Victory Models, Cruisers & Touring (pr) B. SMOOTH V Update you Victory side covers with a smooth chrome look that ll really stand out. 7685 Fits: '03-'13 Victory Models with V shaped covers between cylinders (Fits both Left & Right side) (pr) Note: Does not fit Judge or Boardwalk models accessories for C. ROULETTE Horn Cover Retains the sound & improves the look on horns mounted between the frame down tubes. 7689 Fits: All '04-'13 Victory Vegas, Kingpin, Hammer, Jackpot, 8 Ball & Universal for '04-'13 Models with horn mounted at neck between front down tubes (ea) D. CHROME DIPSTICK COVER This chrome dipstick cover features a gear tooth design that looks great & retains the functionality of stock. Installation is quick & easy to get you back on the road in no time. 7682 Fits: All '06-'13 Victory Models, Cruisers & Touring (ea) Note: Only for 100" or 106" motors. rear brake Reservoir Covers Fits: '10-'13 Victory Cross Roads, Cross Country & Cross Country Tour 7822 Rear Brake Reservoir Cover (ea) L.E.D. LAYDOWN CURVED LICENSE PLATE This curved plate frame features L.E.D. backlighting & a 15 degree mounting angle that flows with the lines on your bikes rear fender. Fits: '10-'13 Victory Cross Roads, Cross Country/Tour, Hard-Ball & Universal applications. Bolts to flat plate mount (Widest mounting slot is 5" wide) for 4"x7" plate 7688 Laydown Curved License Plate Frame (ea) Compliant with FMVSS#571.108 & marked SAE DOT L 11. CLUTCH ARM COVER Featuring a gear tooth design & simple bolt on installation. 7686 Fits: All '06-'13 Victory Models, Cruisers & Touring (ea) multi-fit audio lighting accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop > Covers, Trims & Accents 13
Touring & Comfort 1661 driver Position Passenger Position rendering shown 1661 Revolutionary Product! Multi-Purpose Driver & Passenger Backrest with luggage rack Patent Pending Introducing the first, truly multi-purpose backrest & luggage rack system only available from Küryakyn. Once installed, no tools are needed for adjustments making the switch from rider to passenger backrest a snap.enjoy those longer rides, & with the incorporated luggage rack, carrying all your stuff just got a whole lot easier. Truly multi-purpose provides driver or passenger backrest along with a convenient luggage rack that can be used in either position. Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest. Extremely versatile backrest converts from driver to passenger without tools in seconds. Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs. 1660 Chrome (ea) 1661 Black & Chrome (ea) Note: Requires Mounting Straps (Below) fully adjustable backrest pad - up & down & back & forth Mounting Straps for multi-purpose backrest 1659 Fits: All 10-13 Cross Country (except Tour) & Hard-Ball Models (Also fits Cross Roads with OEM Hard Saddlebags) (pr) 1660 1659 multi-rack Adjustable Trunk Luggage Rack Designed to fit virtually any tour trunk thanks to the ingenious adjustable mounting stand offs, this luggage rack can conform to any trunk lid whether flat or curved. Features include a chrome ½ tubular design that allows for the use any common flag holder if desired, as well as handy built in corner loops to keep your luggage secure. Also included in the kit, a pair of mounting extensions for trunk lids with a steep downward rear swoop or with a trunk lid spoiler installed. Dims: 21 Wide x 12 Long 7159 Fits: All Cross Country Tour Trunks (ea) 7159 14 www.kuryakyn.com 866.277.9598