0F/0F IT Backhoe Loaders Engine Weights Engine Model Cat C. ACERT Operating Weight Minimum 776 kg 17,033 lb Rated Net Power SAE J139 69 kw 93 hp Operating Weight Maximum (ROPS Capacity) 11 000 kg,51 lb Rated Net Power ISO 99 70 kw 9 hp Backhoe Dig Depth Standard 360 mm '" Dig Depth E-Stick Extended 51 mm 17'11"
Engine Engine Model Gross Power Cat C. ACERT SAE J1995 76 kw 10 hp ISO 396 7 kw 100 hp Rated Net Power @,00 rpm SAE J139 69 kw 93 hp ISO 99 70 kw 9 hp EEC 0/69 70 kw 9 hp Net Peak Power @ 1,00 rpm SAE J139 7 kw 105 hp ISO 99 79 kw 106 hp EEC 0/69 79 kw 106 hp Bore 105 mm.13 in Stroke 7 mm 5 in Displacement. L 6 in3 Net Torque Rise @ 1,00 rpm 6% SAE J139 Net Peak Torque @ 1,00 rpm 36 N m 3 lb-ft Engine meets Tier Final emission standards. Net power ratings apply at,00 rpm when tested under the specified conditions for the specified standard. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Based on standard air conditions of 5 C (77 F) and 99 kpa (9.3 in) in dry barometer. Used 35 API gravity fuel having an LHV of 70 kj/kg (1,390 BTU/lb) when used at 30 C (9 F) (reference a fuel density of 3.9 g/l [7.001 lb/gal]). No derating required up to 3000 m (9,3 ft). Net torque rise meets SAE J139. Net peak power ratings apply at conditions specified above. Transmission Power Shuttle Transmission Standard Forward 1st 5. km/h 3. mph Forward nd 9.0 km/h 5.6 mph Forward 3rd 1 km/h 13 mph Forward th 0 km/h 5 mph Reverse 1st 5. km/h 3. mph Reverse nd 9.0 km/h 5.6 mph Reverse 3rd 1 km/h 13 mph Reverse th 0 km/h 5 mph AutoShift Transmission Optional Forward 1st 5. km/h 3.6 mph Forward nd 9.3 km/h 5.7 mph Forward 3rd km/h 7 mph Forward th 19 km/h mph Forward 5th 6 km/h 16 mph Forward 6th 0 km/h 5 mph Reverse 1st 5. km/h 3.6 mph Reverse nd km/h 7.6 mph Reverse 3rd km/h 17 mph AutoShift Transmission with Lock-up Torque Converter Optional Forward 1st 5. km/h 3.6 mph Forward nd 9.3 km/h 5.7 mph Forward 3rd km/h 7 mph Forward th 19 km/h mph Forward 5th 3 km/h mph Forward 5th LUC 5 km/h 15 mph Forward 6th 0 km/h 5 mph Forward 6th LUC 0 km/h 5 mph Reverse 1st 5. km/h 3.6 mph Reverse nd km/h 7.6 mph Reverse 3rd km/h 17 mph AutoShift automatically shifts between second gear and highest selected gear. Forward/reverse electric power shuttle is controlled by a conveniently placed, hand operated lever that provides instant direction changes between forward and reverse through power hydraulic clutches. Torque converter free-wheel clutch allows the converter stator to free-wheel during high speed, low torque conditions such as roading. Single-stage,.63:1 stall ratio. Travel speeds of two wheel drive backhoe loader at full throttle when equipped with 19.5 rear tires. 11
Weights* Hydraulic System Operating Weight Minimum 776 kg 17,033 lb Type Closed Center Operating Weight Maximum 11 000 kg,51 lb Pump Type Variable Flow, Axial Piston (ROPS Capacity) Pump Capacity @,00 rpm 163 L/min 3 gal/min Cab, ROPS/FOPS 163 kg 359 lb System Pressure Backhoe 5 000 kpa 3,600 psi AutoShift Transmission 3 kg 55 lb System Pressure Loader 5 000 kpa 3,600 psi Ride Control kg 31 lb Air Conditioning kg 93 lb Service Refill Capacities Four Wheel Drive 165 kg 36 lb Cooling System with Air Conditioning.5 L 5.9 gal MP Bucket (1.0 m3/1.3 yd3) 75 kg 1,6 lb Fuel Tank 160 L gal (no forks or teeth) Diesel Exhaust Fluid* 19 L 5.0 gal Loader, IT with Quick Coupler 317 kg 699 lb Engine Oil with Filter. L.3 gal Extendible Stick 305 kg 67 lb Transmission Power Shuttle Counterweights (Option 1) 115 kg 55 lb WD 15.0 L.0 gal Counterweights (Option ) 0 kg 530 lb WD 15.0 L.0 gal Counterweights (Option 3) 60 kg 1,015 lb Transmission AutoShift * Specifications shown are for machine equipped with 0.96 m3 WD 19.0 L 5.0 gal (1.5 yd3) general purpose loader bucket, 610 mm ( in) heavy duty backhoe bucket, 115 kg (55 lb) counterweight, 0 kg (176 lb) Rear Axle 16.5 L. gal operator and full fuel tank. Planetaries 1.7 L 0. gal Steering Front Axle (WD) 11.0 L.9 gal Planetaries 0.7 L 0. gal Type Front Wheel Hydraulic System 95.0 L 5.1 gal Power Steering Hydrostatic Hydraulic Tank 0.0 L 10.6 gal Bore 65 mm.6 in * Must meet the requirements outlined in ISO 1. Stroke 0 mm.7 in Requires ultra-low sulfur fuel </= 15 ppm fuel sulfur. Rod Diameter 36 mm 1. in Axle Oscillation 11 Tires Turning Circle WD/WD (inner wheel not braked) Choices listed as combination of front/rear tires: Outside, Front Wheels.1 m 6'10" Front: 11L-16 ( ply) F-3/Rear: 19.5L- ( ply) R ATU Front:.5/0-1 ( ply) 1-3/Rear: 19.5L- ( ply) ATU Outside, Widest Loading Bucket 10.97 m 36'0" Front:.5/0-1 NHS ( ply) 1-3/Rear: 1L- (16 ply) R ATU Front: 30/0R 1/Rear: 19.5L- ( ply) R ATU Axle Ratings Front: 30/0R 1/Rear: 500/70R RT Front Axle, WD Static 96 kg 50,5 lb Standards Dynamic 916 kg 0,33 lb Brakes SAE J/ISO 350; Front Axle, WD ISO 350 1996 Static 96 kg 50,5 lb Cab ROPS SAE J100 MAY9; ISO 371 199 Dynamic 916 kg 0,33 lb Cab FOPS SAE J/ISO 39 APR9 Rear Axle LEVEL II and ISO 39: Static 96 kg 50,5 lb 199 LEVEL II Dynamic 916 kg 0,33 lb Cab Sound ANSI/SAE J1166 OCT9 Axle Oscillation 10 Degrees is 79 db(a) WD and WD axles are pendulum mounted and permanently Exterior Sound SAE J1 JUN6 is sealed and lubricated, requiring no daily maintenance. Also features 76 db(a) double-acting steering cylinder with 5 steering angle for increased maneuverability.
Engine Features Regeneration is passive and does not require any input from the operator or disrupt work. Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity. Forged chrome/molybdenum-steel crankshaft with crankshaft with either induction hardened or nitrocarburized journals. Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip. Heat resistant, silicone-chrome steel intake and STELLITE-faced exhaust valves provide long life. Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life. Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness. Intake and exhaust ports are precision cast to promote optimum gas flow. Direct injection fuel system provides accurate fuel delivery; remote mounted electric lift pump improves serviceability. Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator. Direct electric, -volt starting and charging system with 0 CCA Group 31 maintenance free battery. Standard glow plug starting aid system for efficient cold weather starting. High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise. Higher low end torque for better engine/machine performance. Engine is equipped with electric fuel priming pump. Brakes Features: Brakes meet the following standards: SAE J73 and ISO 350 requirements. Self-adjusting, completely enclosed and sealed. Foot operated brake pedals can be interlocked for roading. Parking/secondary brakes are independent of the service brake system. Parking brake is mechanically applied through an adjustable hand lever located on the right console. 13
Machine Dimensions Single Tilt Loader IT Loader Single Tilt Loader General Purpose General Purpose General Purpose Multi Purpose Multi Purpose (0.96 m3/1.5 yd3) (1.0 m 3 /1.31 yd 3 ) (1.1 m 3 /1. yd 3 ) (1.0 m3/1.31 yd3) (1.1 m3/1. yd3) 1 Overall Transport Length 7169 mm 3'6" 7136 mm 3'5" 70 mm 3'" 7133 mm 3'5" 7133 mm 3'5" Overall Length (loader on ground) 71 mm 3'5" 7096 mm 3'3" 7161 mm 3'6" 7059 mm 3'" 7059 mm 3'" Overall Transport Height 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" Standard Stick Overall Transport Height 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11" Extendible Stick Overall Width 3 mm 7'7" 3 mm 7'7" 3 mm 7'7" 3 mm 7'7" 3 mm 7'7" 3 Height to Top of Cab/Canopy 19 mm 9'3" 19 mm 9'3" 19 mm 9'3" 19 mm 9'3" 19 mm 9'3" Height to Top of Exhaust Stack 7 mm 9'0" 7 mm 9'0" 7 mm 9'0" 7 mm 9'0" 7 mm 9'0" Height to Loader Hinge Pin (transport) 31 mm 1'3" 31 mm 1'3" 97 mm 1'0" 3 mm 1'5" 3 mm 1'5" Ground Clearance (minimum) 9 mm 1'0" 9 mm 1'0" 9 mm 1'0" 9 mm 1'0" 9 mm 1'0" 5 Rear Axle Centerline to Front Grill 705 mm '10" 705 mm '10" 705 mm '10" 705 mm '10" 705 mm '10" Front Wheel Tread Gauge 195 mm 6'3" 195 mm 6'3" 195 mm 6'3" 195 mm 6'3" 195 mm 6'3" Rear Wheel Tread Gauge 17 mm 5'7" 17 mm 5'7" 17 mm 5'7" 17 mm 5'7" 17 mm 5'7" 6 Wheelbase WD/AWD 00 mm 7'3" 00 mm 7'3" 00 mm 7'3" 00 mm 7'3" 00 mm 7'3" Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( in) standard duty bucket, 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified.
Machine Dimensions Single Tilt Loader IT Loader IT Loader with Quick Coupler General Purpose General Purpose Multi Purpose (0.96 m 3 /1.5 yd 3 ) (1.15 m3/1.5 yd3) (1.0 m 3 /1.31 yd 3 ) 1 Overall Transport Length 7 mm 3'11" 779 mm 3'11" 711 mm 3'" Overall Length (loader on ground) 79 mm 3'11" 77 mm 3'11" 7197 mm 3'7" Overall Transport Height Standard Stick 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" Overall Transport Height Extendible Stick 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11" Overall Width 3 mm 7'7" 3 mm 7'7" 3 mm 7'7" 3 Height to Top of Cab/Canopy 19 mm 9'3" 19 mm 9'3" 19 mm 9'3" Height to Top of Exhaust Stack 7 mm 9'0" 7 mm 9'0" 7 mm 9'0" Height to Loader Hinge Pin (transport) 396 mm 1'" 391 mm 1'3" 36 mm 1'3" Ground Clearance (minimum) 9 mm 1'0" 9 mm 1'0" 9 mm 1'0" 5 Rear Axle Centerline to Front Grill 705 mm '10" 705 mm '10" 705 mm '10" Front Wheel Tread Gauge 195 mm 6'3" 195 mm 6'3" 195 mm 6'3" Rear Wheel Tread Gauge 17 mm 5'7" 17 mm 5'7" 17 mm 5'7" 6 Wheelbase WD/AWD 00 mm 7'3" 00 mm 7'3" 00 mm 7'3" Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( in) standard duty bucket, 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified. 15
Loader Bucket Dimensions and Performance Single Tilt Loader General Purpose General Purpose General Purpose Multi Purpose Multi Purpose (0.96 m3/1.5 yd3) (1.1 m3/1. yd3) (1.15 m3/1.5 yd3) (1.0 m3/1.3 yd3) (1.1 m3/1. yd3) Capacity (SAE rated) 0.96 m3 1.5 yd3 1.1 m3 1. yd3 1.15 m3 1.5 yd3 1.0 m3 1.3 yd3 1.1 m3 1. yd3 Overall Bucket Width 6 mm 9" 6 mm 9" 06 mm 95" 79 mm 90" 5 mm 95" Lift Capacity at Maximum Height 33 kg 7,37 lb 316 kg 7,090 lb 3196 kg 7,06 lb 3097 kg 6, lb 306 kg 6,76 lb Lift Breakout Force 9 09 N 11,197 lbf 9 75 N 11,077 lbf 9 099 N 11,037 lbf 9 019 N 11,00 lbf 771 N 10,96 lbf Tilt Breakout Force 50 190 N 11,3 lbf 51 36 N 11,51 lbf 51 N 11,9 lbf 57 555 N,93 lbf 57 0 N,905 lbf 7 Maximum Hinge Pin Height 37 mm 11'5" 37 mm 11'5" 37 mm 11'5" 37 mm 11'5" 37 mm 11'5" Dump Angle at Full Height Dump Height at Maximum Angle 76 mm 9'0" 73 mm '11" 73 mm '11" 79 mm 9'" 79 mm 9'" 9 Dump Reach at Maximum Angle 0 mm '" 773 mm '6" 773 mm '6" 716 mm '" 716 mm '" 10 Maximum Bucket Rollback 37 3 3 3 3 at Ground Level 11 Digging Depth 3 mm 3" 3 mm 5" 3 mm 5" 110 mm " 110 mm " Maximum Grading Angle 1 113 113 116 116 Width of Dozer Cutting Edge N/A N/A N/A 6 mm 7'5" 06 mm 7'11" Grill to Bucket Cutting Edge, 7 mm '11" 155 mm 5'0" 155 mm 5'1" 51 mm '9" 51 mm '9" Carry Position 13 Maximum Operating Height 355 mm '3" 395 mm '5" 395 mm '5" 0 mm '5" 0 mm '5" Jaw Opening Maximum N/A N/A N/A 790 mm '7" 790 mm '7" Bucket Jaw Clamping Force N/A N/A N/A 55 700 N,51 lbf 55 700 N,51 lbf Weight (does not include teeth 51 kg 99 lb 73 kg 1,03 lb 93 kg 1,07 lb 75 kg 1,6 lb 77 kg 1,706 lb or forks) IT Loader with Quick Coupler General Purpose General Purpose Multi Purpose (0.96 m 3 /1.5 yd 3 ) (1.15 m3/1.5 yd3) (1.0 m 3 /1.31 yd 3 ) Capacity (SAE rated) 0.96 m 3 1.5 yd 3 1.15 m3 1.5 yd3 1.0 m 3 1.31 yd 3 Overall Bucket Width 6 mm 9" 06 mm 95" 79 mm 90" Lift Capacity at Maximum Height 3716 kg,193 lb 3655 kg,050 lb 3 kg 7,601 lb Lift Breakout Force 51 05 N 11, lbf 50 555 N 11,365 lbf 9 67 N 11,16 lbf Tilt Breakout Force 6 3 N 10,11 lbf 6 106 N 10,365 lbf 50 30 N 11,35 lbf 7 Maximum Hinge Pin Height 390 mm 11'5" 390 mm 11'5" 390 mm 11'5" Dump Angle at Full Height Dump Height at Maximum Angle 679 mm '9" 60 mm '10" 75 mm 9'0" 9 Dump Reach at Maximum Angle 69 mm '10" 6 mm '10" mm '" 10 Maximum Bucket Rollback at Ground Level 0 0 39 11 Digging Depth 105 mm " 105 mm " 95 mm " Maximum Grading Angle 110 110 1 Width of Dozer Cutting Edge N/A N/A 6 mm 7'5" Grill to Bucket Cutting Edge, Carry Position 1600 mm 5'3" 1597 mm 5'3" 159 mm 5'0" 13 Maximum Operating Height 07 mm '6" 77 mm '" 0 mm '" Jaw Opening Maximum N/A N/A 790 mm '7" Bucket Jaw Clamping Force N/A N/A 55 700 N,51 lbf Weight (does not include teeth or forks) 7 kg 95 lb 1 kg 1,060 lb 7 kg 1,596 lb Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( in) standard duty bucket, 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified. 16
Backhoe Dimensions and Performance Single Tilt Loader IT Loader Standard Stick E-Stick Retracted E-Stick Extended Digging Depth, SAE (maximum) 360 mm '" 390 mm '5" 5 mm 17'11" 15 Digging Depth, 610 mm ( ft) Flat Bottom 311 mm '" 351 mm '" 505 mm 17'9" Reach from Rear Axle Centerline at Ground Line 670 mm '1" 6737 mm '" 77 mm 5'6" 16 Reach from Swing Pivot at Ground Line 56 mm 1'5" 567 mm 1'7" 665 mm 1'10" Maximum Operating Height 55 mm 1'1" 556 mm 1'3" 6 mm 0'" Loading Height 36 mm 11'11" 3599 mm 11'10" 169 mm 13'" 17 Loading Reach 1 mm 6'1" 199 mm 6'" mm 9'" Swing Arc 10 10 10 Bucket Rotation 05 05 05 1 Stabilizer Spread, Operating Position (center) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10" Stabilizer Spread, Operating Position (outside) 3770 mm '" 3770 mm '" 3770 mm '" Stabilizer Spread, Transport Position 3 mm 7'7" 3 mm 7'7" 3 mm 7'7" Bucket Dig Force 6 191 N,31 lbf 63 90 N, lbf 63 90 N, lbf Stick Dig Force 3 510 N 9,71 lb 3 0 N 9,757 lb 31 6 N 7, lb Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( in) standard duty bucket, 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified. 17
Dimensions with Forks 5 3 6 1 7 Fork Tine Length 1070 mm/3'6" 0 mm/'0" 1370 mm/'10" Operating Load (SAE J1197) 30 kg 5,159 lb 63 kg,990 lb 191 kg,9 lb SAE Load Center 535 mm 1'9" 610 mm '0" 65 mm '3" Operating Load (CEN 7-) 77 kg 6,111 lb 79 kg 6,06 lb 76 kg 6,009 lb CEN Load Center 500 mm 1'" 500 mm 1'" 500 mm 1'" 1 Overall Length (forks on ground) 761 mm 5'" 73 mm 5'" 790 mm 6'" Reach at Ground (from grill to heel of fork) 93 mm 3'1" 939 mm 3'1" 937 mm 3'1" 3 Maximum Reach (from grill to heel of fork) 75 mm '10" 75 mm '10" 75 mm '10" Fork Height at Maximum Reach 15 mm 5'3" 15 mm 5'3" 157 mm 5'" 5 Reach at Maximum Height (from grill to heel of fork) 696 mm '3" 696 mm '3" 696 mm '3" 6 Maximum Fork Height 310 mm 11'" 309 mm 11'" 30 mm 11'" 7 Maximum Fork Depth (below ground level) 6 mm 0'0" 5 mm 0'0" mm 0'0" Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( inch) standard duty bucket, and 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified. 1
Dimensions with Material Handling Arm 11 10 9 13 5 6 7 3 1 Material Handling Arm Position Retracted Mid-Position Extended Operating Load (SAE J1197 and CEN 7-)* 1056 kg,3 lb 67 kg 1,7 lb 95 kg 1,09 lb Overall Length, Maximum 67 mm 9'1" 96 mm 3'" 10 6 mm 35'" 1 Reach at Maximum Depth (from machine nose) 59 mm 1'11" 59 mm 1'11" 595 mm 1'11", 3, Maximum Depth 53 mm '" 3530 mm 11'7" 530 mm '10" 5, 6, 7 Maximum Reach (from machine nose) 31 mm 10'5" 1 mm 13'9" 51 mm 17'0" Height at Maximum Reach 1101 mm 3'7" 1103 mm 3'7" 1106 mm 3'" 9, 10, 11 Reach at Maximum Height (from machine nose) 1577 mm 5'" 16 mm 7'1" 755 mm 9'0", 13, Maximum Height 570 mm 15'0" 5377 mm 17'" 613 mm 0'3" *Hydraulically limited. Dimensions and performance specifications shown are for machines equipped with.5/0-1 SGL front tires, 19.5L- IT55 rear tires, ROPS canopy, standard stick with 610 mm ( inch) standard duty bucket, and 0.96 m3 (1.5 yd3) loader bucket and standard equipment unless otherwise specified. 19
Backhoe Lift Capacity Cat 0F/0F IT Standard Stick Boom Lifting kg lb m ft 1 161 3,573 6 0 1766 3,9 1 3 175 3,936 1 5 16 170 3,35 3 16 5 167 3,700 17 1 6 16 3,55 3 10 5 19 7 1551 3,0 6 0 6 9 3,9 7 9 37 3,16 1 10 137 3,05 9 0 0 11 13,959 10 130,75 1 13 7,17 11 6,31 15 6 3,5 13 3 10 Stick Lifting kg lb 15 16 131,037 17 557 5,63 5 16 1 60 5,79 19 70 5,961 m 6 5 3 1 0 1 0 30 6,91 ft 0 1 16 10 6 0 Cat 0F/0F IT Extendible Stick Retracted Boom Lifting kg lb 1 39 3,173 1573 3,6 3 15 3,7 1533 3,30 5 70 3,1 6 05 3,097 7 131,957 1,3 9,699 10 117,5 11,79 103,37 13 1050,3 100,93 15 19,53 Stick Lifting kg lb 16 1677 3,697 17 37 5,6 1 0 5,301 19 9 5,93 m 1 3 16 17 1 5 19 6 0 7 9 10 11 13 1 15 10 6 5 3 1 0 1 m 6 5 3 1 0 1 3 5 ft 0 1 16 10 6 0 6 10 16 0 6 6,36 ft 0 1 16 10 6 0 1 569,09 60 13,1 Lift Capacities are over-end values. Machine equipped with WD, OROPS, 0.96 m3 (1.5 yd3) general purpose bucket, and no counterweight. Extendible stick includes 60 kg (1,015 lb) counterweight. 0
Backhoe Lift Capacity Cat 0F/0F IT Extendible Stick Extended Boom Lifting kg lb m ft 1 3 1,9 6 0 1010,6 1 1 3 1073,366 5 16 3 16 105,39 17 5 1070,35 1 5 6 101,96 19 3 10 6 0 7 1003, 7 1 6 976,153 9 950,095 3 1 9 10 7 1,955 10 0 0 11 75 1,9 11 73 1,9 1 13 95 1,973 6 103,55 13 15 150 3,311 3 15 10 Stick Lifting kg lb 16 6 1,9 17 1116,61 5 16 1 57 3, 19 16 3,6 m 6 5 3 1 0 1 0 1671 3,6 ft 0 1 16 10 6 0 1 1777 3,91 015, 3 6 5,76 599 13,09 Lift Capacities are over-end values. Machine equipped with WD, OROPS, 0.96 m3 (1.5 yd3) general purpose bucket, and no counterweight. Extendible stick includes 60 kg (1,015 lb) counterweight. 1
Counterweights Minimum Counterweight Recommendations Standard Stick Extendible Stick Single-Tilt IT Loader w/qc Single-Tilt IT Loader w/qc Loader Bucket Power Train kg lb kg lb Loader Bucket Power Train kg lb kg lb GP WD 0 530 no counterweight GP WD 60 1,015 0 530 MP WD no counterweight no counterweight MP WD 0 530 no counterweight Forks WD N/A N/A no counterweight Forks WD N/A N/A 0 530 Material WD N/A N/A no counterweight Material WD N/A N/A 0 530 Handling Arm Handling Arm Backhoe Buckets With weld on adapters and pin-on teeth Standard Duty Width Rated Capacity Weight No. of Width Rated Capacity Weight No. of mm in L ft 3 kg lb Teeth mm in L ft 3 kg lb Teeth 305 0. 111 5 3 305 60.1 13 95 57 1 0. 6 57 1 100 3.5 155 31 6 610 10 6. 1 311 5 610 0.9 1 0 76 30 30.1 157 35 5 76 30 190 6.7 10 63 10 9 36 90 10. 176 3 6 Coral Heavy Duty Pin Lock Heavy Duty Width Rated Capacity Weight No. of Width Rated Capacity Weight No. of mm in L ft 3 kg lb Teeth mm in L ft 3 kg lb Teeth 305 96 3. 113 9 3 305 0. 1 66 3 06 16 3.3 131 3 06 16 110 3.9 3 57 1 139.9 139 307 57 1 0. 135 99 610 07 7.3 16 370 5 610 10 6. 160 353 5 76 30 75 9.7 19 5 76 30 30.1 177 391 5 9 36 35. 9 6 9 36 90 10. 01 3 6 High Capacity Pin Lock Soil Excavation Width Rated Capacity Weight No. of Width Rated Capacity Weight No. of mm in L ft 3 kg lb Teeth mm in L ft 3 kg lb Teeth 305 96.6 113 7 3 57 1 10 6. 155 31 06 16 3 5.6 131 37 3 610 0.5 1 0 5 57 1 139 6.5 139 36 76 30 30 11.3 06 5 5 610 07 9.6 16 5 9 36 30 13. 33 513 6 76 30 75.9 19 75 5 Heavy Duty Rock Width Rated Capacity Weight No. of mm in L ft 3 kg lb Teeth 305 70.5 7 79 3 57 1 130.6 6 3 610 00 7.1 17 3 5 76 30 70 9.5 197 3 5 9 36 330 11.7 93 6 9 36 35 16. 53 6
0F/0F IT Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. Adjustable auxiliary controls, backhoe loader Air cleaner Alarm, back-up Alternator, 150 amp Audible system fault alarm Automatic Engine Speed Control (AESC) Battery, maintenance-free, 0 CCA Battery disconnect switch Battery remote jumpstart Boom transport lock Brace, lift cylinder Brake, secondary parking Brakes, hydraulically boosted, oil disc, dual pedals, interlocking Bucket level indicator Canopy, ROPS/FOPS Cat cushion swing system Coat restraint Coolant/antifreeze, extended life Counterweight, bumper Dome light (cab only) Diagnostic port for engine, machine and gauge cluster Electronic Control Modules Differential lock, loader joystick Engine, Cat C. ACERT (Direct Injection Turbocharged), meets Tier Final emission standards, selective catalyst reduction, diesel oxidation catalyst (DOC) Engine enclosure, sound suppression removal panels Face seals, O-ring Fan, suction and guard Fast reversing shuttle, all gears Fenders, rear Filters, spin-on: fuel, engine oil, transmission oil, water separator Filters, bowl and cartridge: hydraulic fluid Flashing hazards/signal lights Floor mat Fuel tank, fully enclosed Fully hinged front grill for cooling package cleaning access Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level Ground level fuel fill and DEF fill High ambient cooling package Hood lock, inside cab Hydraulic hose, XT Hydraulic oil cooler Hydraulic oil level sight gauge Hydraulic valve, hydrostatic steering Hydraulic valves, loader function Hydraulic valves, backhoe 5 function Hydraulics, load sensing with variable displacement piston pump Indicator lights: Eco mode active, water in fuel, remote dial throttle active, engine warning, warning lamp, emissions module malfunction, AESC active, low battery/ charging system warning, high hydraulic oil temperature; LCD warnings: engine oil pressure, machine locked (if equipped), service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass Instrument panel lights Joystick controls: pilot operated, excavator-style with pattern changer Key start/stop system LCD screen: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, oil life reset, DPF force regeneration, maintenance intervals, ECM/system info Lights, working ( front, rear) Loader, self-leveling, return-to-dig and transmission disconnect switch Loader, single tilt Mirror, rearview One-touch low idle Open circuit breather Pattern changer, in cab Power receptacle, volt, internal, 1 external Power steering, hydrostatic Radio ready cab Seat belt, retractable, 51 mm ( in) Socket, two roof Stabilizer shoes, street Steering knob Seat, air suspension, fabric or vinyl cover, with armrest Starting system, glow plugs Steering, hydrostatic Storage compartment, lockable Storage tray Stop and tail lights Swing transport lock Tilt steering wheel Tires Toolbox, external, lockable Torque converter Throttle, hand and foot, electronic Transmission, four speed, syncromesh Transmission neutralizer switch Transport tie-downs Two Wheel Drive Vandalism locks, four Warning horn, electric 3