NAMUR Technical details

Similar documents
NAMUR Technical details

Series MI-01, MI-02, MI-03

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Electrically operated poppet valve. The manual override is detent and is operated by screw driver.

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)

Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)

Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217

COILS, CONNECTORS, SOLENOID VALVES

3/2-way Solenoid Valve for pneumatics

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA

SOLENOID VALVES AND PNEUMATIC VALVES

Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:

Series P directly operated solenoid valves

Table of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06

Series 581 ISO Pneumatic Directional Control Valves

Nugget 40, V08 series

For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

2/2-way Solenoid Valve with servo diaphragm

Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER

HERION SERIES Indirect solenoid actuated soft seal

Series PD directly operated solenoid valves

Valve terminal systems Valve terminal systems Series TC08. Brochure

Valve terminal systems Valve terminal systems Series TC15. Brochure

Valves and Solenoid valves Series 7

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

0322, 0324, Pilot Solenoid Valve, Plastic

VALVES ISO 5599/1, SERIES IPV-ISV

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

Series PD directly operated solenoid valves

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

Pneumatic Valve 4V100 Series

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15

Pilot-Operated Directional Control Valves Series D3 - D11

SOLENOID VALVES AND PNEUMATIC VALVES

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals

97100 NAMUR. Technical data

Servo-operated 2/2-way solenoid valves Type EV220A

15 mm Pilot Valve. More technical specifications are reported in the following pages. 1

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).

400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

Solenoid directional valves type DPHI, DPHU

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.

2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en

Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.

Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW

26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

2/2 Pressure operated valves

200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS

COMPACT VALVE - 1/4 Series DS2

C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5

Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

Directional valves Electrically operated CL03 series-ev. Brochure

Transmitters: Relay Valve VR4151/4152

Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32

600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS

Type Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits

2/2 way Angle-Seat Valve for medium up to C, DN15-50

Solenoid System FLANGE MOUNTING VERSION

Technical Data Sheet

series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW

% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT

300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS

SOLENOID VALVES AND PNEUMATIC VALVES

Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT

Our policy is one of continued research and development. We therefore reserve the right

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

Directional Control Valve Series D3W Soft Shift

Coils for solenoid valves

Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472

Solenoid valves 2/2-way servo operated type EV220B 15 50

Direct-acting 3/2 way plunger valve

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.

Transcription:

Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free and dried compressed air according to ISO 87-1:010, Class 7::4, instrument air, free of aggressive additives. Alternatively the pressure dew point must be at least 10 C below lowest occurring ambient temperature. Materials Body: Al (adized), plastic, seals: NBR, inner parts: Al, steel and plastic IP 6 according to EN 609 Valves in accordance with 014/4/EU (ATEX) available. (Chapter 1) Electrically operated spool valve. The manual override is detent and is operated by screw driver. The model KN- has a coil with enhanced humitidy resistance and a additional gasket at the coil. The location pin, screws and seals are included. /-way-valves /- and /-way-valves 1 1 KN-0-10-HN-xxx KN--10-HN-xxx /-way, single soleid, air spring return, NC KN-0-11-HN-xxx KN--11-HN-xxx /-way, single soleid, mechanical spring return, NC 14 4 1 14 4 1 14 4 1 14 4 1 KN-0-10-HN-xxx KN--10-HN-xxx /-way, single soleid, air spring return KN-0-11-HN-xxx KN--11-HN-xxx /-way, single soleid, mechanical spring return KN-0-0-HN-xxx KN--0-HN-xxx /-way, double soleid KN-0-0-HN-xxx KN--0-HN-xxx /-way, center position closed Please complete: xxx = electrical option 14 4 1 KN-0--HN-xxx KN---HN-xxx /-way, center position exhausted Electrical options -xxx Nominal voltage Power consumption Specifics Plug connection *1 KN-0 KN- V DC 4. W Form B industrial rm -441-741 V DC. W max. 8 bar Form B industrial rm -461-761 4 V DC 4. W Form B industrial rm -44-74 4 V DC 4.8 W M -O4-4 V DC. W max. 8 bar Form B industrial rm -46-76 4 V DC. W max. 8 bar M -O6-4 V AC 7/4 VA Form B industrial rm -4-7 11 V AC 7/4 VA Form B industrial rm -46-76 0 V AC 7/4 VA Form B industrial rm -47-77 * 1 Plug socket t included, suitable plug sockets see page. Subject to change 01

Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical data Model-.: KN-0-10 KN--10 KN-0-11 KN--11 KN-0-10 KN--10 KN-0-11 KN--11 KN-0-0 KN--0 KN-0-0 KN--0 Operating pressure* (bar)...10...10...10...10...10...10...10 Pilot pressure* (bar)...10...10...10...10...10...10...10 Flow rate (Nl/min) 780 780 900 800 900 680 680 Response time (ms) at 6 bar on: 16 off: 18 on: 1 off: 16 on: 16 off: 17 on: 16 off: 18 on: 14 off: 14 on: 14 off: 16 Weight (kg) 0.0 0.0 0.0 0.0 0.440 0.440 0.440 Dimensions * max. 8 bar at. W and. W KN-0- KN-- on: 14 off: 16 M-04-10-HN. KN-0-1x-HN, MO-04-10-HN KN--1x-HN 1 44 19 4 Ø. 68 40 9 M-04-10-HN. KN-0-1x-HN, MO-04-10-HN KN--1x-HN KN-0-0-HN, KN--0-HN, KN-0-x-HN, KN--x-HN 1 19 4 Ø. 40 4 68 4 10 18 04 1 = pressure inlet,4 = outlets, = exhausts Plug socket (t included in scope of delivery) can be repositioned by 180. Soleid coil can be repositioned by 4 x 90. 0 Subject to change

Valves > electrically valves > operated electrically valves operatede > accessories valves > Plug sockets Form B according to DIN EN 1701-80 Contact distance mm 10 mm P + E IP 6 according to EN 609 requires a flat gasket Model-.: Voltage (AC/DC) Status indicator Protective circuit Connecting cable Wire cross section Ø Connecting cable 0-0 V without max. 1. mm² 6-8 mm 8-ST-01-G Form B industrial rm Contact distance mm 11 mm P + E IP 6 according to EN 609 requires a flat gasket M-04, M-0, M-07, M-, KM-09, KM-10, MS-18, KN-0, MN-06, MI-01, MI-0, MI-0 Model-.: 8-ST-01 8-ST-04-1 8-ST-04-7 8-ST-06-1 8-ST-06-7 8-ST-06-K-1* 8-ST-06-K-7* Voltage (AC/DC) 0-0 V 10-0 V 70-0 V 4 V 0 V 4 V 0 V Status indicator yes yes yes yes yes yes Protective circuit yes (varistor) yes (varistor) yes (varistor) yes (varistor) Connecting cable without without without without without m m Wire cross section max. 1. mm² max. 1. mm² max. 1. mm² max. 1. mm² max. 1. mm² x 0.7 mm² x 0.7 mm² Ø Connecting cable 6-8 mm 6-8 mm 6-8 mm 6-8 mm 6-8 mm * These plug sockets are fitted with integrated flat gaskets. Dimensions Form B according to DIN EN 1701-80 Form B industrial rm. 8.8 10. 8.8 11 41. 41. M. 9 8.6 M 8. 14. 8.6 1. 1. Subject to change 0

valves Valves > electrically operatede valves > > spare parts > Soleid coils Form B according to DIN EN 1701-80 mm Contact distance 10 mm P + E IP 6 according to EN 609 with connected plug socket Duty cycle 100 % Temperature range* -0 C... +0 C Voltage tolerance ± 10 % * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP-011-G-4 -SP-011-G-47 Voltage 4 V DC 0 V AC Power consumption DC 4. W - Power consumption AC - 4.0 VA Form B industrial rm Contact distance mm 11 mm P + E Duty cycle 100 % Temperature range* Voltage tolerance ± 10 % IP 6 according to EN 609 with connected plug socket -0 C... +0 C M-04, M-0, M-07, M-, KM-09, KM-10, MS-18, KN-0, MN-06, MI-01, MI-0, MI-0 * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP-011-411 -SP-011-4 -SP-011-4 -SP-011-46 -SP-011-47 -SP-0-41 -SP-0-4 Voltage V DC 4 V DC 4 V AC 11 V AC 0 V AC V DC 4 V DC Power consumption DC 4. W 4. W - - -. W. W Power consumption AC - - 4 VA 4 VA 4 VA Model-.: -SP-011-1-711 -SP-011-1-7 -SP-011-1-7 -SP-011-1-77 -SP-0-1-7 Voltage V DC/ 4V AC 4 V DC/ 48 V AC 110/11 V AC 0 V AC 4 V DC Power consumption DC 4.6 W 4.8 W - -. W Power consumption AC 7.1 VA 7.7 VA 6.0 VA/ 7.6 VA 7.9 VA - Specifics Enhanced humidity resistance. 04 Subject to change

Valves > electrically valves > operated electrically valves operatede > spare valves parts > Soleid coils M connection mm Contact distance - P IP 6 according to EN 609 with connected plug socket Duty cycle 100 % Temperature range* -0 C... +0 C Voltage tolerance ± 10 % * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP-011--O -SP-0--O Voltage 4 V DC 4 V DC Power consumption DC 4.8 W. W Power consumption AC - - Specifics Mounting on manifold t allowed. With integrated LED and protective circuit. Min. mounting distance for manifold mounting is 0 mm. With integrated LED and protective circuit. Dimensions Form B according to DIN EN 1701-80 Form B industrial rm Ø9.1 8. 8. Ø9.1 0. Ø8.1 Ø16 1. M Ø8.1 1. M 9. M connection Ø16 10 Ø9.1. 1. 4. 9. Ø8.1 Ø16 Subject to change 0

valves Valves > electrically operatede valves > > technical information > Voltage code - HN * - * * * Manual override HN detent HNR detent HNT n-detent 0 Technical information Coil and plug options ATEX GD, encapsulated with casting compound width 0 mm Coil type -SP-07 1 with coil and plug 4 with coil, without plug without coil 6 without pilot valve 7 8 9 with coil, with enhanced humidity resistance, without plug with coil, with enhanced humidity resistance, with plug ATEX GD, intrinsically safe, with plug width 0 mm -SP-08 A ATEX GD, without plug, width 0 mm -SP-040 B ATEX GD, with plug, width 0 mm -SP-040 C ATEX GD, without plug, width mm -SP-041 D E F G H I J K L M ATEX GD, encapsulated with casting compound width mm with coil, with enhanced humidity resistance, without plug, low temperature version with coil shape B according to DIN EN 1701-80, with plug with coil shape B according to DIN EN 1701-80, without plug with coil shape A according to DIN EN 1701-80, without plug (if t standard) with coil shape A according to DIN EN 1701-80, with plug (if t standard) with coil, with plug with LED and protective circuit with coil, with plug with LED, without protective circuit -SP-06 -SP-060-1 -SP-011-G -SP-011-G -SP-016 -SP-016 N with coil with M connection O P with coil with M connection with LED and protective circuit without connector bridge, without plug Q with coil with with cable R with cable up to 1 m length S T with connector bridge, without plug U ATEX GD, without coil (for coil -SP-06) V W X ATEX GD, Flame proof enclosuresand encapsulated with casting compound ATEX GD / GD, without coil (for coil -SP-041 and -SP-04) ATEX GD, without coil (for coil -SP-040 in 0V AC and 11V AC) Y ATEX GD, without coil (for coil -SP-08) Z ATEX GD / GD, without coil (for coil -SP-040 in 4V DC and -SP-07) -SP-04 0 1 4 6 7 Manual override position on side of without indication ports 1//() DC ports 1//() AC ports 1//() DC, low power consumption ports 1//() DC ports /(4) AC ports /(4) DC, low power consumption ports /(4) without indication ports /(4) 0 Voltage without indication 1 V 4 V 4 V 4 48 V 110 V 6 11 V 7 0 V 8 40 V 9 A B C D E F 4 V 6 V 8 V 61 V 6 V 9 V Not all options are suitable for all valve series 06 Subject to change