CEN/CLC KIC InnoEnergy Technical WS in Brussels on 26 November 2018 CLC/TC 21X. Secondary cells and batteries

Similar documents
Electro-Mobility Battery Standardization. Alfons Westgeest Secretary General EUROBAT Battery Day 30 November 2010

TC21X STANDARDIZATION ACTIVITIES FOR START-STOP BATTERIES

Electroinsulating Footwear and Overboots for Live Working Practical Experience and Evolution of Standards

Waste Stream Li-ion Battery Sorting Issues

This document is a preview generated by EVS

Improving Safety and Performance Testing for EV Batteries EVS November 2013

MOBILITY STRATEGY AND APPROACH OF IEC. Dr. Bernhard Thies German National Committee of the IEC

COMMISSION REGULATION (EU)

Battery Safety and Industry Developments

LEV and Battery Standardisation

This document is a preview generated by EVS

The Prospect of International Standardization for Electric Vehicles

INTERNATIONAL STANDARD

This document is a preview generated by EVS

Improving Safety and Performance Testing for EV Batteries

Introduction: RECHARGE in Europe

The xev Industry Insider Report

Evaluation of the Directive 2006/66/EC

12468/10 SJC/fp 1 DG I 1A

Batteries from Finland. February

INTERNATIONAL STANDARD

German Hydrogen Association

2030 Battery R&D Roadmap for Hybridization and E-Mobility

The xev Industry Insider Report

Implementation and development of standards for Lithium-ion energy storage technologies within the South African context

IEC 62133:2012 (2nd Edition) Understanding IEC Safety Requirements for Rechargeable Cells & Batteries used in Portable Devices

INTERNATIONAL STANDARD

Batteries: Stored Energy Discussion Questions:

CEN TC256 WG01 PROGRESS: SHARING LATEST PROGRESS ON THE WORK DONE BY CEN TC256 WG01 ON THE EUROPEAN STANDARD EN45545

IEA Implementing Agreement Hybrid and Electric Vehicles

ISO CO2 Storage ISO TC 265

This document is a preview generated by EVS

CENELEC TC 8X/WG 06 System Aspects of HVDC Grids

Secretariat FRANCE. To prepare international standards regarding specifications for all types of fuses, with the object of determining:

AS AS Australian Standard. Starter batteries Lead acid. This is a free 6 page sample. Access the full version online.

Agenda. Introduction to IEC Differences between the 1 st and 2 nd edition. How will these changes impact the industry?

Course Syllabus and Information

Economic and Social Council

EU Battery Directive & Circular Economy. Rene Schroeder, Lead Conference, Berlin 30 June 2017

International Electrotechnical Commission (IEC) Technical Committee 82 reported by the Secretary

Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy

IEEE SCC21 Overview/Status IEEE Standards Coordinating Committee 21 on Fuel cells, Photovoltaics. Dispersed Generation, and Energy Storage

ACEA Position Paper. Revision of Batteries Directive 2006/66/EC

SAE BATTERY RECYCLING COMMITTEE: BATTERY RECYCLING APPROACHES FOR THE 21 ST CENTURY. Colin Pelletier, Timothy Ellis RSR Technologies Dallas, TX

Draft Technical Report. Fuel consumption, External Electrical Consumption and Maximum speed measurement.

COMMISSION FOR EXTRICATION AND NEW TECHNOLOGY

A joint industry analysis of the current and future availabilities of resources and materials used in a range of battery technologies

The German Standardisation Roadmap Electric Mobility WG 4 Standardisation and Certification

IEC TC82 Working Group 6 Balance of System Components

IEEE* American National Standards

ISO/TR TECHNICAL REPORT. Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life

SECONDARY BATTERY TESTING & CERTIFICATION REQUIREMENT. 26 th Jan Presented by;

INTERNATIONAL STANDARD

SegenSolar (Pty) battery storage training

Jean Marc SPITZ. Chairman of the Conseil de Standardisation Technique Automobile [Council for Automotive Technical Standardisation] (CSTA)

Batteries & Fuel Cells Seminar

The German Standardisation Roadmap Electric Mobility 2020

The Cell versus the System: Standardization challenges for electricity storage devices

ISO 6264 INTERNATIONAL STANDARD. Hydraulic fluid power Pressure-relief valves Mounting surfaces

Structure of South African National Committee (SANC)

Batteries, Super Capacitors, Fuel Cells & EV`s Seminar

Evaluation of the Directive 2006/66/EC

Hoppecke Batteries AHK & GIZ Zambia

Nickel-Zinc Large Format Batteries for Military Ground Vehicles

Batteries & Fuel Cells Seminar. Seminar Program Topics. Seminar Schedule - April 7-8, full days. Seminar Location. In partnership with:

Components for Powertrain Electrification

Saft battery systems for surface ships. May 2013

AABC Europe 2017 Mainz, Germany Dr. Jörn Albers, Dr. Christian Rosenkranz Johnson Controls Power Solutions EMEA. Johnson Controls Power Solutions EMEA

There are several technological options to fulfill the storage requirements. We cannot use capacitors because of their very poor energy density.

Electrically propelled vehicles Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor

Working group CEST Certification and Standardization

Batteries & EV`s Seminar

Electric Vehicles and the Environment (EVE IWG)

INTERNATIONAL STANDARD

Stationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems

Battery Market in China. Seminar: Electrochemical Power Sources II Christian Eggler & Yannick Schwarz

European Standards for Alcohol Interlocks

This document is a preview generated by EVS

INTERNATIONAL STANDARD

Accelerated Testing of Advanced Battery Technologies in PHEV Applications

Hydrogen & Fuel Cell Standards Update. Julie Weis, Sara Marxen, and Julie Cairns August 2014

Batteries are electrochemical cells, each consisting of two electrodes immersed in an electrolyte. Contains the electrochemical energy of the battery

ENVIRONMENTAL AND ADMINISTRATIVE CONTRIBUTIONS BATTERIES Portable - Industrial - Automotive

ARAI - Center of Excellence for Electric Mobility. 2. International Transportation Electrification Conference (ITEC) India 2017

Battery Energy Storage Systems for Maximizing Renewable Energy Introduction: Approaches and Cases in Japan

Frequently Asked Questions on. Directive 2006/66/EU on Batteries and Accumulators and Waste Batteries and Accumulators. (Updated version, May 2014)

CREATIVE ENERGY. Reliable producer of high-quality, cost-competitive lithium iron phosphate. belifematerials.com

Proposal for New Task X PV for Transport

BATTERIES FOR ENERGY STORAGE SYSTEMS CAPITAL MARKETS DAY NOVEMBER 29, 2018 DR. PHILIPPE ROUSSEL, VP GLOBAL STRATEGIC MARKETING, SPM

Putting Science into Standards (PSIS) Workshop 2016

Energy Storage. Electrochemical Cells & Batteries

Care and Feeding of Rechargeable Batteries. Chris Capener March 1, 2012

Battery Charger Systems. Test Procedure, Call for Data, & Proposed Standards. April 8, 2008 Prepared for: Patrick Eilert Ed Elliott Gary Fernstrom

DRAFT TANZANIA STANDARD

Guidelines for Battery Electric Vehicles in the Underground

ISO INTERNATIONAL STANDARD

Safety requirements for secondary batteries and battery installations Part 1: General safety information

A new battery generation for the next car generation

Swiss Rule SNR and ISO-Standard Project on Testing Particle Filter Systems

Claude Chanson General Manager RECHARGE Association THE CHALLENGES FOR THE BATTERY INDUSTRY DEVELOPMENT FOR E-MOBILITY IN EUROPE

Transcription:

CEN/CLC KIC InnoEnergy Technical WS in Brussels on 26 November 2018 CLC/TC 21X Secondary cells and batteries Dr. Torsten Hildebrandt Secretary CENELEC TC21X Manager Requirements Analysis Johnson Controls Power Solutions EMEA

Content 1. Structure and overview of the work at European level - Cenelec TC 21x 2. Overview of work at worldwide level. IEC TC 21 Secondary Cells and Batteries, A. Work items of the IEC TC 21 B. Work items of the IEC SC21A 3. Concluding remarks 2 CLC TC21X - Dr. T. Hildebrandt

1. CLC/TC 21X Secondary cells and batteries Scope: To execute the following standardization activities for secondary cells and batteries all applications and industries: to implement IEC/TC 21/SC 21A documents into CENELEC standards to prepare Product Standards, general requirements and methods of testing included to prepare Safety Standards and associated Codes of Practice to consider Environmental Requirements (EC Rules) for the products. Mirror committee to IEC TC21 & SC21A Officers: Chairperson Secretary Mr Jean Paul Douady (French NC, Exide) Dr Torsten Hildebrandt (German NC, Johnson Controls) 3 CLC TC21X - Dr. T. Hildebrandt

1. CLC/TC 21X Secondary cells and batteries Four active working groups Experts from battery industry and car manufacturers Annual plenary meeting Strong cooperation with IEC TC21 / SC21A Many European experts are part of IEC working groups Majority of EN documents are realized in IEC working groups and taken over via parallel voting procedures to European level. WG 01 - Safety requirements on batteries and battery installations Convenor: Mr Pierre Bourg (French NC) WG 03 - Starter batteries EN 50342 - General requirements Convenor: Dr Torsten Hildebrandt (German NC) Main focus on lead acid starter batteries WG3 is part of the Cenelec emwg WG 05 - Li Batteries: General Requirements Group EN 50604 Convenor Mr Richard Aumayer (German NC) Main focus on Li systems for Pedelecs WG 06 - Secondary batteries for industrial applications, general requirements Convenor Mr Martin Sinz (German NC) CLC TC21X - Dr. T. Hildebrandt

1. CLC/TC 21X Secondary cells and batteries European document family EN 62660 on electrical vehicles have been / are elaborated in the joint working group TC21 / SC21A / TC69 of IEC under the convenorship of Mr Yoshiaki Nitta (Japanese NC): EN 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing (update in preparation) EN 62660-2:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing (update in preparation) EN 62660-3:2016 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements 5 CLC TC21X - Dr. T. Hildebrandt

1. CLC/TC 21X Secondary cells and batteries Main home grown European documents: EN 50342-1:2015 - Lead-acid starter batteries - Part 1: General requirements and methods of test EN 50342-2:2007 - Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals EN 50342-4:2009 - Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles EN 50342-5:2010 - Lead-acid starter batteries - Part 5: Properties of battery housings and handles EN 50342-6:2015 - Lead-acid starter batteries - Part 6: Batteries for Micro-Cycle Applications EN 50342-7:2015 - Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries EN 50604-1:2016 - Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods EN 61429:1996/A11:1998 - Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC 6 CLC TC21X - Dr. T. Hildebrandt

A. Managed by the IEC TC 21 on Secondary Cells and Batteries IEC TC 21 Chairman: Mr. Herbert Giess (Swiss NC) IEC TC 21 Secretary: Mr. Yves Boudou (France NC)

A. Managed by the IEC TC 21 on Secondary Cells and Batteries IEC 63193 (est. 2019) Lightweight Electric Vehicles IEC 60095-1/-2/-4/-6/-7 Starter - Start & Stop Batteries IEC 60254-1/-2 Traction Batteries IEC TC21 Lead-Acid IEC 61427-2 Batteries for ON-Grid applications IEC 60896-11 IEC 60896-21/-22 Stationary Batteries IEC 61427-1 Batteries for OFF-Grid Photovoltaic applications

A. Managed by the IEC TC 21 on Secondary Cells and Batteries IEC 62932-2-1 Flow Battery System Stationary Application Performance IEC 62984-3-1 High temperature Na-based systems Performance IEC TC21 Others chemistries IEC 62660-1 Lithium-Ion in road vehicles Performance IEC 63118 Lithium-Ion in road vehicles Not for propulsion

A. Managed by the IEC TC 21 on Secondary Cells and Batteries IEC TR 62540 RFID Identification of stationary Lead-acid cells IEC 62902 Marking symbols Battery chemistry identification IEC 62485-1 Safety for Batteries and installations IEC 62485-2 Safety for Stationary Batteries IEC 62932-2-1 Flow Battery System Safety requirements IEC 62984-3-1 High temperature Na-based system Safety requirements IEC TC21 Safety IEC 62485-6 Safe operation Lithium-Ion - Traction IEC 62485-3 Safety for Traction Batteries IEC 62485-4 Safety for VRLA batteries in Portable Appliances IEC 62485-5 Safe operation Lithium-Ion - Stationary

B. Managed by the IEC SC21A IEC SC21A Chairman: Mr. Steven P; Wicelinski (US) IEC SC21A Secretary: Mr. Pierre M. Bourg (NC France) IEC SC21A Assistant Secretary: Mr. Jean-Marie Bodet (NC France) IEC SC21A Safety concept IEC SC21A Safety Standards

A. Managed by IEC SC21A for Secondary Alkaline/Non-acid Electrolyte Cells and Batteries IEC 61951-2 IEC 62675 NiMH Industrial and Portable applications IEC 61960 Lithium-Ion Portable applications Performance IEC SC21A NiCd NiMH Li-ion IEC 62620 Lithium-Ion Industrial applications Performance IEC 60623 IEC 60952-1/2/3 IEC 61951 IEC62259 NiCd Cells Industrial and Portable applications IEC 60952-1/2/3 Aircraft Batteries

B. Managed by the IEC TC SC21A: The safety standards Portable Rechargeable Alkaline and Lithium Industrial Rechargeable Alkaline IEC 62133-2 ED1 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systems. Published on Feb 2017 IEC 62133-1 ED1 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 1: Nickel systems. Published on Feb 2017 IEC SC21A Safety IEC 61438 ED1 Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users Published on Nov 1996 IEC 63115-2 ED1 Sealed nickel-metal hydride cells and modules for use in industrial applications Part 2: Safety Published on Feb 2017

B. Managed by the IEC TC SC21A: The safety standards Industrial Rechargeable Lithium IEC 63057 ED1 Safety requirements for secondary lithium cells and batteries for use in road vehicle not for the propulsion. In progress (Committee Draft for Vote) IEC SC21A Safety IEC 62619 ED1 Safety requirements for secondary lithium cells and batteries, for use in industrial applications. Published on Feb 2017 Revision ED2 in progress IEC 63056 ED1 Safety requirements for secondary lithium cells and batteries for use in electrical energy storage system. In progress (Committee Draft for Vote)

3. Concluding remarks - Cenelec TC21X, the standardisation arm of Europe for Secondary Cells and Batteries of all Chemistries and for all Applications, is actively engaged in shaping the tests and requirements for electrochemical power sources - The current TC21X activities center on batteries for e-mobility (start-stop, hybrid, pure EV and twowheelers) with 6 active projects of the EN 50342 and EN 50604 series - Cenelec TC21X is closely collaborating with IEC TC21 and SC21A so to integrate, via shared experts and common standardisation topics, world-wide know-how and experience in its standardization activity. - Cenelec TC21X is using IEC TC21 and SC21A, via joint IEC working groups or official liaisons, as the bridge toward multiple other Technical Committees of IEC such as TC8, TC9, TC18, TC69, TC120 engaged in applications of secondary batteries for Power Grids, Trains, E-Mobility and Ships - Cenelec TC21X is ready to start discussions with the parties involved in order to evaluate the possibility to generate EN standards aimed at qualifing derated or end-of-life EV batteries, for a "second life" in decentralised energy storage systems CLC TC21X - Dr. T. Hildebrandt