Date: Jan. 27, 2018 SJSZ 80/173 Foam Board Extrusion Line
1. Equipment List&Price Item Description Unit Price Qty (USD) (Set) 1 SJSZ 80/173 Double Screw Extruder 1 Total Price (USD) 2 Mould - - - 3 Mould Temperature Controller 2 4 Calibration Platform 1 5 Cooling Bracket 1 6 Haul Off Machine 1 7 Transever Cutter 1 8 Stacker with Auto Robot 1 9 Tray 1 10 SRLZ500/1000 High Speed Mixing Unit $17,000 1 $17,000 11 Crusher-400(extrad blade) $2,500 1 $2,500 12 Pulverizer-600 $5,500 1 $5,500 13 Screw Loader 2 14 Dust Collector 2 15 Protection Device(Air Shaft) 2 16 Pressure Indicator on Extruder 1 Grand Total: $128,000 SAYS FOB SHANGHAI PRICE USD ONE HUNDRED&TWENTY-EIGHT THOUSAND ONLY
2. Specification of Foam Board Extrusion Line 1. SJSZ 80/173 Double Screw Extruder 1.1 Extruder Inlet wire terminal of power source Manufacturer of motors, pumps Type of feeder Connection of die head with flange Display method of data on operation panel Advantages over other competitors 1.2 Screw Diameter Quantity Mesh type Total torque RPM Thickness of Nitrided layer Suitable for powder material 1.3 Barrel Barrel type Heating method Heating zones Heating power Three phase, four wire system Main AC motor: 90kW SIMENS, ABB-590 invertor Spiral spring feeder+forced feeder By bolts Mainly digital display Good shearing, high output, reasonable design, high accuracy and easy control, high-grade materials and parts with steadfast performance 80/173mm DEMAJI SKD 2pcs Conical mesh 14.2kNm 1~36.9(counter rotating) 0.6~0.7mm Yes Integer Air cooling unit, special stainless cover and Aluminium heating rings are used on the barrel 5 zones(including interflow channel) 36kW Temperature range 50~300 Cooling zones Cooling fans Adapter Manufacturer of barrel 5 zones, volume 1200m³/min 0.25kW~0.55kW Stainless steel 3Cr13, chromium plated with inner convergent flow type Zhoushan Thickness of Nitrided layer 0.6~0.7mm 1.4 Driving system&speed reducing system Power of main driving motor Working method of main motor 90kW SIMENS motor Three phase asynchronous motor, connected to gearbox by coupler
RPM of main motor Type of gearbox Gears Distribution box Speed adjusting of main motor 1.5 Vacuum exhausting system Type Motor power Working method of motor Vacuum degree Qty of vacuum pump 1.6 Uploading feeding system Feeding method RPM of feeding screw Motor power RPM of motor Speed adjustment Uploading feeding output 30~1500RPM Helical gears, hardened Carburized and ground, 20CrMoTi Two distribution axles driven by super-taper spiral gear Governed by AC transducer with ABB invertor Monoblock and hydroseal vacuum pump 4kW Three phase asynchronous motor 0~0.075MPa Calibrated feeding 0.5~30RPM 1.5*6grade 10~1500RPM Governed by AC transducer 600kg/h 2. Mould(Buyer supply) 3. T-die Lip temperature controller
Medium High temperature exchanging oil Heating range 50~200 Oil pump motor 2.2kW Heater motor 18kW 4. Calibration platform Qty of shaped mould Inner cavity adjustable Size of each mould Plate fluctuation mode Calibrating medium Plate fluctuation type Water pump Inner cavity Air cylinder 5 pairs(10pcs) According to board thickness 100*600*1500mm Air control water Up and down 1.5kW Plating chrome Airtac
Total moved control By manual and electrical 5. Cooling bracket with protection film device Dimension Diameter of roller Qty of roller Material of bracket 5000*1500mm Φ76mm 9pcs Stainless steel 6. Haul off machine(including side trimming cutter)
Way of haul off Qty of rubber roller Specification Power of motor Speed Way of up and down Max traction Side trimming cutter and dust collector Saw slice diameter Motor power Fluctuation type Fluctuation range Cutting edge range Material of saw Cutter dust collection, air blower collection Motor Rubber roller haul 10 pairs Φ220*1500mm 7.5kW, 2 sets, Taiwan brand, Speed controller: SIMENS 0~2m/min pneumatic 100kN 305mm 2.2kW*2, SIMENS Pneumatic 80mm 1220mm High quality alloy steel 3kW 7. Transever cutter
Cutting way Speed reducer Cutter motor Cutting blade diameter Through move way Meter device, Meter counter Electric cross cutter Y2-80M2-6 2 motors, SIMEMS 400mm Up and down 8. Stacker with auto robot Dimension 2.5m*1.75m Specification 60*1400mm Qty of roller 6 Material of bracket roller Stainless steel and seamless pipe Discharge way Pneumatic 9. Tray 10. Electrical system AC contactor Motor invertor Schneider ABB invertor
Overload relay Temperature meter Break relay Middle relay Common switch SIMENS OMRON SIMENS Schneider SIMENS 11. Auxiliary machines 11.1 SRL-Z 500/1000 High Speed Mixing Unit Total volume 500/1000L Valid volume 350/700L Invertor 75kW, SIMENS Motor power 75kW Heating method Self-friction Total weight 3.8 ton Heat mixing time 8-10min Discharge method Manual/pneumatic Dimension 5170*3000*3100mm 11.2 Crusher-400
Revolving blade diameter Blade RPM Qty of rotating blade Fixed blade Hole size of mesh screen Motor power Capacity 11.3 Pulverizer-600 380mm 500RPM 9pcs 2pcs 8mm 18kW 300~400kg/h Main motor Induced draft fan motor Dust collector Distribution cabinet Shaker Automatic feeding machine Stainless steel separator Fan Stainless steel pipe Output 55kW 7.5kW 400~550kg/h9(20~60mesh)
11.4 Screw loader Loading Motor Power Pushing Motor Power Diameter of Pipe Thickness of Pipe Thickness of Screw Blade Tank Volume Wall Thickness of Tank Height of Dumping Opening Material of Contact Size of Tank Material of Structure 2.2kW 0.75kW 114mm 2mm 2mm 300L 1.5mm 700mm SS201 1000*800*900mm Carbon Steel 3. Business Term OFFER VALIDITY: 30 days DELIVERY TIME: 60 days (after deposit down-payment) TERMS OF PAYMENT: 30% of total price as down-payment, and the other 70% should be paid before delivery, both by T/T. WARRANTY: Mechanical parts & Electrical parts 12 months from starting and anyhow no longer than 14 months from the date of delivery for the parts considered by the manufacturer to be defective. Parts of normal wear are excluded from warranty. EXCLUSIONS: Civil works. Electrical cables connecting the different machines forming the system with the main electrical control panel. Installation and starting on the purchaser s premises. Cranes, minor metalwork and equipment that may turn out to be necessary during installation and starting on site. Labor to aid our technician when starting. Whatever else not specified in this offer.