Horizon Patient Bed Light LED and Fluorescent Solutions

Horizon Patient Bed Light LED and Fluorescent Solutions

Horizon is the perfect blend of design, performance and durability. An aesthetically-pleasing form that minimizes the visual impact in the space. LED and fluorescent light source options that deliver high quality ambient and reading illumination. Die cast and extruded aluminum construction that ensures reliability. Indirect/Direct Light Pattern

Horizon offers features that satisfy the needs of the patient, healthcare staff and facility management in acute care and assisted living environments. Horizon is available with either an LED or fluorescent light source. The LED option provides 15.7% more lumens and consumes 28.5% less power than a comparable T5 fluorescent model. A variety of control options are available including a pull cord switch or integrated low voltage controller that interfaces with patient pillow controls. Horizon s tapered form minimizes its visual impact on the wall while enhancing the optical performance. The separate optical compartments promote an asymmetric light distribution that is ideal for indirect ambient illumination and direct lighting for patient reading. With its die-cast end caps and extruded aluminum body, Horizon is designed to withstand the daily demands of healthcare environments. Horizon is available in four standard colors all with an antimicrobial additive that inhibits the growth of microbes. Installation is completed in three easy steps and maintenance of components is simple. BIM content available for LED and fluorescent models online at www.alkco.com/bimcontent Other Complimentary Alkco Healthcare Luminaires SoftLook LED semi-recessed IP65 and wet location listed Suitable for vertical or horizontal wall mounting or ceiling mounting 4 lengths available 120 and 277 volt 3 standard finishes Smooth form and antimicrobial finish supports infection control protocols WayGlo LED Night Light Wet location listed night light 4 faceplate styles, 3 standard finishes 120 and 277 volt Available with white or amber LEDs Thru-wall, double face option Smooth form and antimicrobial finish supports infection control protocols For more information on Alkco s healthcare lighting solutions, go to www.alkco.com or contact your local Alkco representative.

Product Specifications Construction The exterior housing has an extruded aluminum body and die cast end caps. The reflector assembly is formed from 20 gauge cold rolled steel. Back plate formed from 18 gauge galvanized steel. Finish Housing has a polyester powder coat paint finish in one of four standard colors. Custom finishes are available upon request with color chip provided by the customer. Reflector assembly has white powder coat paint finish. All standard finishes have an antimicrobial additive to inhibit the growth of microbes. Light Sources LED - Horizon is now available in high efficiency LED, offering longer source life, greater efficacy and lower power consumption. - The LEDs have a CCT of 3500K, a minimum CRI of 80, and have 50,000 hours rated life. (defined as 70% lumen maintenance). - All components are field replaceable. Fluorescent - Horizon can be specified with T8, T5 or T5HO linear fluorescent lamps. - Philips Alto, low mercury lamps are supplied with the luminaire. 3500K is the standard color temperature with alternative color temperatures available upon request. HZN4L351 HZN4T5 180 135 180 135 Soft White Taupe Almond Aluminum 1200 1000 Lens The custom linear lens is extruded from acrylic with a DR additive and has a nominal thickness of 0.063" Lens is retained within 0.25 extruded channels. Lens can be removed without tools. 600 600 90 500 500 Switching The standard switching configuration has an on/off pull cord for the direct compartment with the indirect compartment controlled from a remote wall switch by others. An optional 4-position pull cord switch (HDS) for sequential control of the indirect and direct compartments is available. Pull switches are supplied with a plastic pull cord that is latexfree, stain-resistant, and easy to clean with standard disinfectants. An optional, integrated low voltage controller (LVC) that is compatible with industry standard pillow switches (by other), can be field wired for either sequential or individual switching of the indirect and direct compartments. Horizon can also be specified with less switch (LS) with remote switching (by others) controlling all functions. Electrical Electronic high power factor LED driver rated for 120 and 277 volts. Fluorescent models are provided with electronic, high power factor ballasts rated for 120 and 277 volts. 347 volt ballasts available for T8 lamp and 4' T5HO models. Ballasts are thermally protected and have a Class A sound rating. T5 and T5HO ballasts have end-of-life protection. 1200 0 LEGEND: 45 1000 0 LEGEND: Listing UL and cul listed for damp locations. Installation Simple, three-step luminaire installation. All components are easily accessible for routine servicing. Warranty 3-year warranty on materials and workmanship including LED board and driver but excluding fluorescent lamps and ballasts. Standard manufacturer s warranty applies on fluorescent lamps and ballasts. 45 Horizon LED Horizon T5 CRI 80+ 85 Total Fix. Lumens 6023 1 5203 Wattage (120v) 82.3 2 115.1 Efficacy 73.2 lm/w 3 45.2 lm/w 1 15.7% more lumens with the LED model 2 28.5% less power for the LED model 3 62% increase in efficacy for the LED model over the T5 model

Dimensional Drawings 8-1/8" (206.4mm) 5-1/4" (133.4mm) Front View Side View, LED 8-1/8" (206.4mm) Back View 3" (76.2mm) 8-3/4" (222.3mm) 5-1/4" (133.4mm) 5-1/4" (133.4mm) DIMENSION DIMENSION Side View, Fluorescent (shown with HDS option) HZN2T8 HZN2T5/T5HO HZN3T8 HZN3T5/T5HO 26-5/16" (668.34mm) 24-3/4" (628.65mm) 38-5/16" (973.14mm) 36-9/16" (928.69mm) 17" (431.8mm) 17" (431.8mm) 28" (711.20mm) 27" (685.80mm) HZN4T8 HZN4T5/T5HO HZN4L351 50-5/16" (1277.94mm) 48-3/8" (1228.73mm) 50-5/16" (1277.94mm) 41" (1041.40mm) 39" (990.6mm) 41" (1041.40mm) Ordering Information Sample Catalog No: HZN4L351-11 - 120 - SWH - HDS NOM. LENGTH Model Number Lamp Configuration Voltage Finish HZN2T8 F17 T8 (Med. Bipin) 2' HZN2T5 F14 T5 (Med. Bipin) HZN2T5HO F24 T5HO (Med. Bipin) 3' 4' HZN3T8 F25 T8 (Med. Bipin) HZN3T5 F21 T5 (Med. Bipin) HZN3T5HO F39 T5HO (Med. Bipin) HZN4T8 F32 T8 (Med. Bipin) HZN4T5 F28 T5 (Med. Bipin) HZN4T5HO F54 T5HO (Med. Bipin) HZN4L351 LED 11 (1 lamp up, 1 lamp down) or (LEDs up, LEDs down) 22 (2 lamps up, 2 lamps down) 12 (1 lamp up, 2 lamps down) 21 (2 lamps up, 1 lamp down) 01 (solid top, 1 lamp down) or (solid top, LEDs down) 02 (solid top, 2 lamps down) 10 (1 lamp up, solid bottom) or (LEDs up, solid bottom) 20 (2 lamps up, solid bottom) (standard color is SWH) SWH Soft White 120 277 347 1 TPE Taupe AL Aluminum ALM Almond CC 2 Custom Color 1 347 volt is available for HZN2T8, HZN3T8, HZN4T8 and HZN4T5HO. 2 Customer to provide color chip to match. 3 HDS and LVC cannot be used together. 4 Not available for 2' or 3' models. 5 Not available for 2' models. 6 For 01, 02, 10 and 20 lamp configurations (for fluorescent models only). 7 For 11, 22, 12 and 21 lamp configurations (for fluorescent models only). Options HDS 3 4-position pull chain switch for sequential control indirect and direct lamp compartments (120v only) LVC 3 Low voltage controller (4' models only) LS Less switch EM1 4 Emergency ballast (fluorescent models only) NL LED night light SBF Slow blow fuse BSS 5 Bed shut-off switch (fluorescent models only) PC Replacement 6' plastic pull cord (non-latex) DIM1 6 (1) Dimming ballast (fluorescent models only) DIM2 7 (2) Dimming ballasts (fluorescent models only) RSP1 5,6 (1) Radio Suppressor (fluorescent models only) RSP2 5,7 (2) Radio Suppressors (fluorescent models only)

Philips Alkco 11500 Melrose Avenue Franklin Park, Illinois 60131 Phone (847) 451-0700 Fax (847) 451-7512 www.alkco.com 2012 Philips Group. All rights reserved. Certain products illustrated in this catalog may be protected by applicable patents and patents pending. Burton will aggressively defend all of its intellectual property. We reserve the right to change details of design, materials and finishes. Printed in the U.S.A. 06/12